User's Guide for Polycom HDX Room Systems, Version 3.0
Contents
1. Polycom Inc User s Guide for Polycom HDX Room Systems Polycom HDX systems do not support Office Communicator distribution list groups which are created on the Microsoft Exchange Server and are typically used for sending email to a group of people Viewing Microsoft Office Communications Server Presence States Polycom HDX systems and Office Communicator users in an integrated environment use the following presence icons to indicate presence states Do Not Disturb Indicates that the HDX system or Office Communicator user is set to Do Not Disturb In a Call Indicates that the HDX system or Office Communicator user is in one of the following states In a call Accepting urgent interruptions only Busy Inactive In a Conference In a Meeting Available Indicates that the HDX system or Office Communicator user is available Offline Indicates the HDX system or Office Communicator user is offline Presence Unknown Indicates that the presence state of the HDX system or Office Communicator user is unknown Polycom Solution Support Polycom Inc Polycom Implementation and Maintenance services provide support for Polycom solution components only Additional services for supported third party Unified Communications UC environments integrated with Polycom solutions are available from Polycom Global Services and its certified Partners These additional services will help customers successfully design deploy optimize a2. gt gt Press A Home on the remote control Polycom Inc User s Guide for Polycom HDX Room Systems Enabling Dual Monitor Emulation Polycom Inc If your system administrator has allowed access to user settings you might be able to set your system for Dual Monitor Emulation also called split screen viewing With Dual Monitor Emulation you can display multiple windows on one monitor To enable Dual Monitor Emulation 1 2 3 4 5 Select System from the Home screen Select User Settings from the System screen Select F Next to see more settings Scroll to Dual Monitor Emulation and press O on the remote control to enable the option Press A Home to save your change and return to the Home screen During calls using Dual Monitor Emulation without content you can press the Display button on the remote control to scroll through the following screen layouts 1 Near and far sites same size side by side 2 Far site big near site small User s Guide for Polycom HDX Room Systems 3 Near site big far site small 4 Near site full screen 5 Far site full screen The last layout viewed is used for the next call During calls using Dual Monitor Emulation with content you can press the Display button on the remote control to scroll through the following screen layouts 1 Content big far and near sites small 2 Content big far site small 3 Content and far site same size 4 Content full s
3. 10 Polycom Inc User s Guide for Polycom HDX Room Systems To open or close the privacy shutter on the Polycom EagleEye View camera gt gt Move the slider to the right to close the privacy shutter or to the left to open it You can still make and receive calls when the shutter is closed but the people at the far site cannot see you Setting and Using Camera Presets Polycom Inc Camera presets are stored camera positions that you can create ahead of time or during a call Presets allow you to e Automatically point a camera at pre defined locations in a room e Select a video source such as a VCR or DVD player a document camera or an auxiliary camera If your system s camera supports pan tilt and zoom movement you can create up to 100 preset camera positions 0 99 for the near site Each preset stores the camera number its zoom level and the direction it points These presets remain in effect until you delete or change them If far site camera control is allowed you can create up to 16 presets 0 15 for the far site camera These presets are saved only for the duration of the call You might also be able to use presets that were created at the far site to control the far site camera To move the camera to a stored preset 1 Ifacall is connected press a Near or gt Far and then choose a near site or far site camera 2 Press a number on the remote control User s Guide for Polycom HDX Room System
4. Guide for Polycom HDX Room Systems 36 To place a point to point call using a connected SoundStation IP 7000 conference phone 1 Press on the conference phone and press the Video or Phone soft key 2 On the conference phone keypad enter one of these The IP address for example 10 11 12 13 of the site you want to call The phone number for example 19784444321 of the site you want to call To enter letters press the ABC soft key To enter a dot or symbol press the ABC soft key then key multiple times You can also place calls using the conference phone s directory or the redial key The indicators on the conference phone are green when the system is in a call and audio is not muted To place a multipoint call using a connected SoundStation IP 7000 conference phone 1 Call the first site 2 When the call connects press the Add Video or Add Phone soft key on the conference phone 3 Place a call to the next site Repeat steps 2 and 3 until all sites are connected To control volume in a call using a connected SoundStation IP 7000 conference phone gt gt Press the and keys on the conference phone to adjust the volume of audio from the far site You can also adjust the volume using the volume buttons on the Polycom HDX system remote control To mute audio in a call using a connected SoundStation IP 7000 conference phone gt gt Press the Mute key on the conference phone You can also
5. mute the audio using the mute button on the Polycom HDX system remote control or on a connected Polycom HDX microphone The indicators on the conference phone are red when your audio is muted The near site mute icon also appears on the monitor display Polycom Inc User s Guide for Polycom HDX Room Systems To end a call using a connected SoundStation IP 7000 conference phone e Press ey on the conference phone to hang up the call e Press the More softkey then the Manage softkey to hang up one connection in a multipoint call To start or stop showing content using a connected SoundStation IP 7000 conference phone gt gt Press the Content soft key on the conference phone Content plays from the following input if that input is configured for Content Camera 4 or Camera 5 on a Polycom HDX 9004 system Camera 4 ona Polycom HDX 9006 Polycom HDX 9002 Polycom HDX 9001 or Polycom HDX 8000 series system Camera 3 ona Polycom HDX 7000 series system Camera 2 ona Polycom HDX 6000 series system Contact your system administrator for more information Using Polycom Conferencing for Microsoft Outlook Polycom Inc If your system is configured to connect to the Microsoft Exchange Server you see a list of the day s meetings on the Calendar screen If your system is not configured to connect to the Microsoft Exchange Server you see the standard month view calendar To view the Polycom HDX system calendar do one
6. of the following e Select Calendar on the Home screen e Select System gt Utilities gt Calendar from the Home screen e Press the Option button on the remote control and select Calendar To view more information about a meeting on the calendar highlight it and press O on the remote control Depending on how your system is configured private meeting details might not be visible and you might see reminders displayed on the system a short time before each meeting If your system is configured to connect to the Microsoft Exchange Server and the Polycom Conferencing Add In for Microsoft Outlook is installed at your site you have access to the following additional calendar features Upcoming meetings scheduled with the Polycom Conferencing Add In for Microsoft Outlook are indicated with on the Polycom HDX system Calendar screen Past meetings scheduled with the Polycom Conferencing Add In for Microsoft Outlook are indicated by O 37 User s Guide for Polycom HDX Room Systems e To join a meeting scheduled with the Polycom Conferencing Add In for Microsoft Outlook you can select Join Now on the Polycom HDX system without knowing the dialing information You can schedule a meeting using the Polycom Conferencing Add In for Microsoft Outlook by clicking P gt Schedule Polycom Conference in the Microsoft Outlook toolbar Using Microsoft Office Communications Server Features with Video Calls Depending on how your
7. the background The foreground and background video sources are configured by the administrator You can adjust the camera or choose a different foreground video source after you start showing content with People on Content To stop showing content with People on Content l Press Option on the remote control 2 Select People on Content Controlling Recording Devices aa Depending on how your system is configured you might be able to use the Polycom HDX remote control to control devices such as VCRs or DVD players that are in the room with the system You might also be able to control a Polycom RSS 2000 server or Polycom RMX system The remote control buttons control these systems by sending audible DTMF tones across the call The Polycom RMX must be configured to use the default DTMF codes assigned to the recording process Contact your system administrator for more information Working with Directory Entries and Favorites 22 The directory on your Polycom HDX system stores dialing information that helps you make calls quickly and easily When a site listed in the directory calls your system the system displays the name on the screen when the call comes in If a site that calls you is not listed in the directory you might be prompted to save the contact information in the directory when the call ends If your system is registered with a global directory server you can see information about other ac
8. Me POLYCOM gt User s Guide for Polycom HDX Room Systems Version 3 0 December 2010 3725 23978 008 A Trademark Information Polycom the Polycom Triangles logo and the names and marks associated with Polycom s products are trademarks and or service marks of Polycom Inc and are registered and or common law marks in the United States and various other countries All other trademarks are the property of their respective owners Patent Information The accompanying product is protected by one or more U S and foreign patents and or pending patent applications held by Polycom Inc Customer Feedback We are constantly working to improve the quality of our documentation and we would appreciate your feedback Please send email to videodocumentation polycom com 2010 Polycom Inc All rights reserved Polycom Inc 4750 Willow Road Pleasanton CA 94588 2708 USA No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical for any purpose without the express written permission of Polycom Inc Under the law reproducing includes translating into another language or format As between the parties Polycom Inc retains title to and ownership of all proprietary rights with respect to the software contained within its products The software is protected by United States copyright laws and international treaty provision Therefore you must treat the softw
9. P application Enter the IP address or host name of the Polycom HDX system and the meeting password if one is set On the computer click Connect Open the content you want to show and click in People Content IP To stop showing content 1 If the People Content IP toolbar is minimized maximize it by clicking the icon in the task bar Click in Peoplet Content IP or press Camera and deselect the computer input To keep the call secure content might be automatically stopped when a participant joins the call Polycom Inc User s Guide for Polycom HDX Room Systems Showing Content from a Computer Connected Directly to the HDX System Before you show content check that the computer video is configured to use one of these supported resolutions and refresh rates Polycom HDX 9006 system Polycom HDX 8000 series Polycom HDX 7000 series and Polycom HDX 6000 series 1280 x 960 1280 x 1024 1680 x 1050 1920 x 1080 Polycom HDX 9004 Polycom HDX 9002 and Polycom HDX 9001 Resolution Refresh rates Hz 640 x 480 60 72 75 800 x 600 60 72 75 1024 x 768 60 70 75 1280 x 720 50 60 To set the resolution and refresh rate right click your computer desktop and select Properties gt Settings Polycom Inc 19 User s Guide for Polycom HDX Room Systems To start showing content 1 Make sure the computer is powered on and connected to the Polycom HDX system Polycom HDX 9004 You can conn
10. a vas n X da ya carn AW WAD ewes kal ERA Adding Editing and Deleting Favorites 0 Directoy COU pi 55535205453544 del ea 241 3542 e K Di Kine beets ra Refreshing Entries from the Polycom Global Directory Server Contacts WIT POST C an n s kh e aa tein N n n A0 09 a00 Including Multiple Sites in Calls W KK KK KK KK KK KK KK KK KK KK KK KI Placine a Multipoint Call sya tam Me ade ee Ew kar Ay kU AWA ers Passwords for Multipoint Calls 0 0 0 eee KK eee Multipoint Viewing Modes k KK KK KK KK kK kk kk kk kk k Using Chair Control for Multipoint Calls 3 Changing the Way Calls Are Answered KK KK KK KK KK KK Temporarily Refusing Calls iy nt wi Veo shes eae eh hee a Answering Video Calls Automatically 00 Muting Automatically Answered Video Calls L gg Mand OU 4 26a und dana n wade 2 Ayak act taadetena Using a Polycom SoundStation IP 7000 Conference Phone witha Polycom HDX System 2 a wi yak a werd W man b ees W3 Wi a4354 Using Polycom Conferencing for Microsoft Outlook Using Microsoft Office Communications Server Features With Video Calls ns suc taeoor ets cal sccead wae eee Regn ppanDaa Managing Contacts Using Office Communicator Viewing Microsoft Office Communications Server Presence States Polycom Solu
11. all screen if it is enabled on your system In the dialing field enter the dialing information Depending on the capabilities of your system and the system you are calling the dialing information could look like one of these examples 10 11 12 13 UP address include the dots 2555 E 164 extension for H 323 or SIP stereo polycom com DNS name 19782922854 ISDN or phone number user domain com SIP To enter letters press Keyboard on the remote control To delete a number press 1 Delete on the remote control Enter any additional information needed for the call The available settings depend on the type of call and your system s configuration Not all calls require these settings Call Quality Specify the call rate or call type for this call For most calls choose Auto to let the system determine the best quality for the call For audio only calls you might need to set this to Phone Second ISDN number Use two numbers only when the person you are calling instructs you to do so Polycom Inc Polycom Inc User s Guide for Polycom HDX Room Systems Extension If you need to dial an extension E 164 address enter the extension in the second entry field If your system is not configured with a second entry field you can enter the extension when the gateway prompts you You can also specify characters in the dial string as instructed by the system administrator 4 Press ay Cal
12. are like any other copyrighted material e g a book or sound recording Every effort has been made to ensure that the information in this manual is accurate Polycom Inc is not responsible for printing or clerical errors Information in this document is subject to change without notice Contents Usine the Remote Control sise header ieee H KA blond l le ile odtad 2 Power the system On and OIE s xax yay wa iaeoa Wa ele beeen ea 3 CMe anO Answer 2c eet hei eee Re KN Ka WAK PAK DAW EW ke 3 An Werin Call se ition 000 55355425 2430553190145454 2 24yi aba yes ene 3 Dacia et Gell y 450140 20 te ee en a ey ere ean ee wae k woe 4 Calling by Entering a Name or Number 4 Calling from the Recent Calls List i si 4 sas Wa sasu vasa Wa 5 Calling from the Favorites Screen 0 0 e KK ee eee 5 Calling a Speed Dial ENY s52 5445 ororen aid irn ea eS wee 6 Calling fromthe Directory ai444 bseece ao beri dw a 2k teks 6 Calling trom the Calendar os 2 dl ag a hk d 34414254 4153 44 2 aval a4 ae 6 Brainerd Calls is udu tne ie deka hota nee E aie a aa Uk Gwe es Ba ae 7 Types of Video Calls You Can Make 00 KK KK KK KK KK eee 7 Participating in an Encrypted Call 00 K eee eee eee 8 Controlling What VOU See yi sy e thet ky she Q aw k Er 2 Ay 9 Selecting and Adjusting a Camera or Other Video Source 9 Setting and Usi
13. ateway number or wait until the gateway prompts you for the extension Polycom Inc 7 User s Guide for Polycom HDX Room Systems Frome You can call By dialing LAN Networked and Public SIP URI E 164 address DNS name or Sites IP address Typically the far site s gateway number then the number of the far site system Protected and Private Sites Consult with the far site about the best method for placing the call ISDN Depending on the H 323 gatekeeper or SIP server the access code of the near site gateway the speed code and the ISDN number of the far site Contact your system administrator for more information Points to note about special dialing scenarios e When you call an IP system through a gateway that requires an extension E 164 address enter the extension in the dialing field whenever possible Check with your network administrator for the extension delimiter you need to enter into the dialing field For example some networks use to separate the extension from the IP address e When you include the extension you are prompted to save both the number and the extension in the directory when the call ends If you enter the extension after the gateway connects you can save only the gateway number when the call ends e To place a call within your PBX system enter the internal extension instead of the full number e If you need to insert a pause add one comma in the dial string for
14. cent Calls screen 1 Go to the Recent Calls screen 2 Highlight the entry 3 Choose Options gt Add to Favorites Grouping contacts can make them easier to find Polycom HDX systems support global groups and Favorites groups Global directory entries are assigned to a global group by your system administrator You cannot edit or delete global directory groups The Favorites group can have one level of subgroups inside of it Any group that you create on the Favorites screen or Directory screen is automatically added as a subgroup under Favorites You can put the same contact in more than one group and you can delete it from one group at a time To move a contact from one group to another you must delete it from the first group and add it to the second group Polycom HDX systems support up to 200 Favorites groups If the system is connected to a global directory server it can also support one of the following Up to 64 additional groups from the Microsoft Office Communications Server directory which appear in the Favorites group Up to 200 additional distribution groups from a Polycom CMA system which appear in the Global Directory group Points to note about groups e You cannot rename a group To change the name of a group delete and recreate it e When you place a call to a group the system uses the call speed specified on the Preferred Speeds screen as the preferred call speed for placing calls e The Sample Sites
15. ch tones DTMF tones press i on the remote control or press and choose Touch Tones Then use the remote control number buttons To enter a meeting password Ifa prompt appears on the screen use the remote control or onscreen keyboard to enter the password e Ifyou hear an audio prompt use the remote control to generate DTMF tones To configure a meeting password 1 Select System from the Home screen 2 Select User Settings from the System screen 3 Enter the password in the Meeting Password field in one of these ways Press the remote control number buttons using the text entry method commonly used with cell phones Press Keyboard to use the onscreen keyboard to enter characters 4 Press A Home to save your change and return to the Home screen Multipoint Viewing Modes 30 What you see during a multipoint call can vary depending on how the Polycom HDX system is configured the number of sites participating the number of monitors you are using and whether content is shared The multipoint viewing mode configured on the host system is the one used in the call To find out more about these modes please talk to the administrator of your Polycom HDX system The following table describes the different multipoint viewing modes Polycom Inc User s Guide for Polycom HDX Room Systems Setting Description Video images from multiple sites can be automatically combined on one monitor in a displa
16. creen 14 Polycom Inc User s Guide for Polycom HDX Room Systems Polycom HDX 9006 Polycom HDX 8000 series and Polycom HDX 7000 series systems with Hardware Version B Polycom HDX 7000 series systems with Hardware Version C and Polycom HDX 6000 series systems show only two windows in Dual Monitor Emulation Showing Moving and Turning Off the PIP Your system might be configured to display a Picture in Picture PIP window During a call on a single monitor system the PIP displays what your main camera is sending to the far site If the far site shows any type of content the content appears in the main part of the screen and the PIP changes to show the people at the far site During a call on a dual monitor system what you see on each monitor and in the PIP depends on how the Polycom HDX system has been configured To show move or turn off the PIP during a call e Press Display on the remote control to display the PIP on screen e While the PIP has a yellow border press Display repeatedly to move it to different corners of the screen e After a brief pause the PIP border turns blue Then press Display to turn the PIP off To swap the views shown in the PIP and the main screen 1 If the PIP is not showing press Display on the remote control to display the PIP on screen 2 Press Camera and select the ire Swap PIP icon Specifying When to Display the PIP Polycom Inc Your system m
17. details in the system s local interface Highlight the Contact and press 3 A dialog appears with the display name address call speed and group Including Multiple Sites in Calls 28 Your system might be configured to participate in multipoint calls During a multipoint call multiple sites can see and hear each other You can also share content in a multipoint call just as you can in a point to point call You can host multipoint calls using a video conferencing system with multipoint capabilities or you can use a bridge such as the Polycom RMX 1000 Polycom RMX 2000 or Polycom MGCTM Polycom Inc User s Guide for Polycom HDX Room Systems Placing a Multipoint Call Polycom Inc How you place a multipoint call depends on whether you re using a Polycom HDX system with multipoint capabilities or a bridge such as the Polycom RMX 1000 Polycom RMX 2000 or Polycom MGC The number of sites allowed in the call is determined by the capabilities of the system or bridge hosting the call The call can include any combination of IP H 323 SIP ISDN V 35 Serial and audio only endpoints For more information about call types refer to Types of Video Calls You Can Make on page 7 For calls hosted by a Polycom HDX system you can define a group in the directory to call all of the sites at one time Alternatively you can place a call to the first site and then add other sites after the first call connects The other sites can call th
18. e Polycom HDX system to join the call For calls hosted by a bridge you might need to enter calling information about all of the sites before the call begins Contact your system administrator for more information To place a multipoint call by adding sites to a call 1 2 3 4 Call the first site When the call connects press ey Call on the remote control Place a call to the next site For more information refer to Placing a Call on page 4 Repeat steps 2 and 3 until all sites are connected To place a multipoint call using a directory group 1 2 3 Press ay Directory on the remote control Highlight a group folder in the directory list Press ey Call to place the call Depending on how your system is configured it attempts to call the group using a pre defined list of call types Contact your system administrator for more information To place a cascaded multipoint call 1 2 Call a group from the directory or place calls one at a time to several other sites For more information refer to Placing a Call on page 4 Ask each site to call additional sites 29 User s Guide for Polycom HDX Room Systems Passwords for Multipoint Calls You might be required to enter a meeting password to join a multipoint call And you can require that far sites enter a meeting password to prevent unauthorized participants from joining multipoint calls hosted by your HDX system If you need to generate tou
19. e all camera presets Cycle through display layouts Select a far site camera or video source Navigate through menus Increase or decrease the sound you hear from the far sites Select a near site camera or video source Return to the previous screen Place or answer a call Display the onscreen keyboard to enter text Display menu of optional features Press once for a dot twice for a colon three times for an asterisk Press to power the system on hold to power off View button presses and various menus Select a camera or other video source Start and stop sending content to far sites Confirm your current selection perform functions on highlighted items Zoom the camera in or out Mute the microphone audio you re sending to the far sites Return to the Home screen View or manage directory entries End a call Delete letters or numbers Enter letters or numbers move the camera to a stored preset position Control a programmed recording device or Polycom RSS server Polycom Inc User s Guide for Polycom HDX Room Systems Powering the System On and Off A Caution In order to avoid corrupting the file system always power off a Polycom HDX system using the power button on the system or the remote control After turning the power off in this way wait at least 15 seconds before you unplug the system from its power source This helps ensure that the system powers off correctly To power on the Po
20. each second you want the system to pause Participating in an Encrypted Call If encryption is enabled on the system a locked padlock icon appears on the monitor when a call is encrypted If a call is unencrypted an unlocked padlock appears on the monitor e If you are ina point to point call or a multipoint call hosted by another system the padlock icon displays the state of your individual connection e If you are hosting a multipoint call the padlock icon displays the combined state of all connections encrypted if all connections in the call are encrypted unencrypted if one or more connections in the call are not encrypted 8 Polycom Inc User s Guide for Polycom HDX Room Systems In one call some connections might be encrypted while others are not The padlock icon might not accurately indicate whether the call is encrypted if the call is cascaded or includes an audio only endpoint To avoid security risks Polycom recommends that all participants communicate the state of their padlock icons verbally at the beginning of a call Controlling What You See Selecting and Adjusting a Camera or Other Video Source You can use the remote control to select and adjust the main camera or other near site or far site video sources such as document cameras computers VCRs or DVD players You might be able to adjust other auxiliary cameras or far site cameras that support pan tilt and zoom movement You can adjust the far site cam
21. ect a computer to video input 4 or 5 When you connect to video input 4 you can also connect to audio input 4 to share sound from your computer Polycom HDX 9002 Polycom HDX 9001 You can connect a computer to video input 4 Polycom HDX 9006 or Polycom HDX 8000 series You can connect a computer to video input 4 You can also connect to audio input 4 to share sound from your computer Polycom HDX 7000 series You can connect a computer to video input 3 You can also connect to audio input 3 to share sound from your computer Polycom HDX 6000 series You can connect a computer to video input 2 You can also connect to the audio input to share sound from your computer 2 Press 2 Content on the remote control or press Camera and select the computer input Audio from the content input is muted unless the content input is selected as a video source To stop showing content gt gt Press Content on the remote control or press Camera and deselect the computer input Showing Content from a Document Camera VCR or DVD Player Depending on how your system is configured you might be able to show different types of information to other sites in a call such as through a document camera VCR or DVD player Before the call begins e Make sure the document camera VCR or DVD player is connected and powered on Refer to the setup sheet that came with your system e Position your document or object in the document came
22. era only if it is configured at the far site to allow you to control it To select a near site or far site camera or other video source 1 If you are ina call press Near or gt Far on the remote control to select either near site or far site control This onscreen icon indicates that you have selected a near site camera or video source This onscreen icon indicates that you have selected a far site camera or video source 2 Press Camera on the remote control Then select the camera or other video source you want to use To adjust a Polycom EagleEye HD Polycom EagleEye II or Polycom EagleEye 1080 camera using the remote control 1 Select either a near site or far site video source to control During a multipoint call being hosted by a system in the call you can only adjust a camera at the far site that is currently speaking Polycom Inc User s Guide for Polycom HDX Room Systems 2 Press the arrow buttons on the remote control to move the camera up down left or right 3 Press N Zoom on the remote control to zoom out or in To adjust a Polycom EqgleEye View camera gt gt Manually swivel the camera right left up or down to frame the view a gt gt Turn the focus wheel to adjust the focus gt gt Select the camera and then press Zoom on the remote control to zoom out or in If you zoom in you can pan or tilt the camera electronically by pressing the arrow buttons
23. group includes Loopback entries and various Polycom regional sites that you can use to place test calls To create a group in Favorites l1 Press vem Directory on the remote control and open the Favorites group or go to the Favorites screen 2 Select Options gt New Group 3 Enter a name for the group Polycom Inc User s Guide for Polycom HDX Room Systems To delete a group from Favorites 1 From the Favorites or Directory screen highlight the group name 2 Press on the remote control or select Options gt Delete Group these entries be sure to assign them to a new group before you delete the old When you delete a group all entries in that group are deleted If you want to keep A group To view or call a group From the Favorites screen or Directory screen highlight the group name then do one of the following e To view the contacts inside the group press the center Select button on the remote control e To place a call to the group press the Call button on the remote control Depending on how your system is configured it attempts to call the group using a pre defined list of call types Contact your system administrator for more information You cannot call a group that contains another group and you cannot call a group that exceeds your system s multipoint calling capability Refreshing Entries from the Polycom Global Directory Server The global directory entries are periodically refreshed o
24. ight be configured with specific default behavior for the PIP in calls If your system administrator has allowed access to user settings you can show move or hide the PIP as needed after a call connects To specify when to display the PIP 1 Select System from the Home screen 2 Select User Settings from the System screen 3 Select Next to see more settings User s Guide for Polycom HDX Room Systems 4 Scroll to PIP press and select one of these settings Select this setting To show the PIP Camera When you press any of the camera control buttons n On connection and during the call Only when you press Display on the remote control 5 Press A Home to save your change and return to the Home screen Controlling What You Hear Adjusting Volume You can raise or lower the volume of the meeting Changing the volume affects only the sound you hear at your site To adjust the volume e Press Volume on the remote control Press and hold Volume on the remote control to quickly increase or decrease the near site volume Muting the Microphone You can mute the microphone if you do not want the far site to hear you To mute or unmute the microphone gt gt Press 2 Mute on the remote control If a Polycom microphone is connected to your system you can also mute the call by pressing on the microphone The indicators on the microphone are red when your audio is muted The near site m
25. ilities gt Calendar from the Home screen Press the Option button on the remote control and select Calendar 6 Polycom Inc User s Guide for Polycom HDX Room Systems 2 Finda meeting scheduled with the Polycom Conferencing Add In for Microsoft Outlook which is indicated with on the Calendar screen 3 Select Join Now to call into the meeting For more information about the Microsoft Exchange Server and the Polycom Conferencing Add In for Microsoft Outlook refer to Using Polycom Conferencing for Microsoft Outlook on page 37 Ending a Call To hang up from a call 1 Press Hang Up on the remote control 2 If prompted confirm that you want to hang up the call automatically after 60 seconds In audio only calls if the person on the telephone hangs up first you need to disconnect the Polycom HDX system from the call just as you would hang up a telephone receiver in a regular phone call 4 In video calls if you don t confirm that you want to hang up the system disconnects Types of Video Calls You Can Make Depending on your system configuration you might be able to make calls using ISDN H 323 SIP or V 35 RS 449 RS 530 You can place an audio only call from Polycom HDX systems that have Analog Phone or Voice Over ISDN enabled The following table lists some possible call combinations Phone number of the far site gateway and the extension E 164 address of the far site Enter the extension after the g
26. l on the remote control to place the call Call progress indicators appear on the HDX system monitor to show that the call is in progress When the indicators turn green the call is connected For more information about using the Place a Call screen refer to Types of Video Calls You Can Make on page 7 Calling from the Recent Calls List If your system administrator has allowed access to Recent Calls you can choose a number to call from a list of the sites you have called recently The Recent Calls screen provides details of all incoming and outgoing calls including the time of the calls To place a call from the Recent Calls screen 1 Select Recent Calls from the Home screen 2 Scroll to the entry you want to call and press ey Call or press the reference number that appears next to the entry to place the call You can filter the list by placed or received calls by selecting Options gt Sort Options To see more details about a call listed on the Recent Calls screen highlight the call and press Q Info on the remote control Calling from the Favorites Screen You might be able to see a list of Contacts on the Favorites screen To place a call from the Favorites screen 1 Select Favorites from the Home screen 2 Highlight the contact you want to call and press ey Call or press the reference number that appears next to the contact to place the call User s Guide for Polycom HDX Room Systems Calling a Speed Dial Entr
27. lycom HDX system do one of the following Press the power button on the remote control e Press the power switch on the front of the system The Polycom splash screen is displayed within about 10 seconds To power off the Polycom HDX system do one of the following Press and hold the power button on the remote control for 2 seconds e Press and hold the power switch on the front of the system for 2 seconds After turning the power off in this way wait at least 15 seconds before you unplug the system from its power source Calling and Answering Answering a Call Polycom Inc The way a Polycom HDX system handles incoming calls depends on how it is configured It either answers the call automatically rejects the call automatically or prompts you to answer the call manually To answer the call manually gt gt Press ay Call or select Yes using the remote control User s Guide for Polycom HDX Room Systems Placing a Call You can use your system to place a video call in any of these ways Entering a name or number on the Place a Call screen Choosing a site from Recent Calls list Favorites screen Speed Dial Directory Calling into a scheduled meeting from the Calendar screen Calling by Entering a Name or Number To place a call by entering a name or number 1 From the Home screen select Place a Call or start entering numbers with the remote control to go to the Place a C
28. m from the Home screen 2 Select User Settings from the System screen 3 Select F Next to see more settings 4 Scroll to Keypad Audio Confirmation and press O on the remote control to enable the option 5 Press c Home to save your change and return to the Home screen Adjusting for Room Lighting A2 If your system administrator has allowed access to user settings you can use the backlight control to adjust the brightness of the video that the main camera sends to the Polycom HDX system Adjusting this setting can be helpful when the room arrangement results in strong light coming from behind the people in the picture Because backlight controls adjust the main camera these controls do not make content from a computer or a document camera appear brighter Polycom Inc Polycom Inc User s Guide for Polycom HDX Room Systems To turn backlight compensation on 1 2 3 Select System from the Home screen Select User Settings from the System screen Scroll to Backlight Compensation and press O on the remote control to enable the option Press Home to save your change and return to the Home screen 43 User s Guide for Polycom HDX Room Systems 44 Polycom Inc
29. n a call press on your Polycom system remote control to access the tone pad Press e Select to activate flash hook The first far site system is placed on hold W ait for a dial tone and then dial the extension of the far site system to which you want to transfer the call The call connects both audio and video between the local system and the second far site system The first far site system is still on hold Hang up the near site system The two far site systems are now connected in a call with audio and video if the capabilities are present Polycom Inc User s Guide for Polycom HDX Room Systems To add a system to a call 1 While in a call press on the Polycom system remote control to access the tone pad Press O Select to activate flash hook The far site system is put on hold Wait for a dial tone and then dial the extension of the system that you want to add to the call Press Select again The call becomes an audio only conference with all of the systems If the system that dialed the flash hook hangs up the other systems remain connected in a call with audio and video if the capabilities are present Customizing Your Workspace You can customize what you see on the screen depending on how your system is configured Allowing the Far Site to Control Your Camera If your system administrator has allowed access to user settings you can allow the far site to control your camera Far site participa
30. n systems registered to the Polycom Global Directory Server You can also manually refresh the global directory entries on your system To manually refresh Polycom GDS entries l1 Press ay Directory on the remote control 2 Select Group gt Polycom GDS 3 Select Options gt Refresh Polycom Inc 27 User s Guide for Polycom HDX Room Systems Contacts with Presence If your system is automatically provisioned and registered to a global directory server your Favorites might include default LDAP group members and up to 200 global Contacts stored by the presence service If the system is registered with a global directory you could see the following icons next to Contacts on the Favorites screen con Presence Description Available The system is set to Available and is registered with a presence service Do Not Disturb The system is set to Do Not Disturb and is SS registered with a presence service or The system is set to Available but is in a call and is not available to receive another call is In a Call The system is set to Available and is registered with a presence service It is in a call but is available to receive another call Unknown Presence The presence state is unknown The Contact was Created locally or is not registered with a presence service S The system is a desktop client that is available but is currently idle Offline The system is powered off or is offline You can view Contact
31. nd manage Polycom visual communications within their UC environments Professional Services for Microsoft Integration is mandatory for Polycom Conferencing for Microsoft Outlook and Microsoft Office Communications Server integrations For additional information and 39 User s Guide for Polycom HDX Room Systems details please see http www polycom com services professional_services index html or contact your local Polycom representative Using Avaya Network Features with Video Calls 40 Depending on how your system is configured you might be able to use Avaya telephony network features such as call forwarding transferring calls and adding additional sites in an audio only conference To activate call forwarding 1 2 Make sure that the Polycom system is not in a call From the Place a Call screen on the Polycom system dial the Feature Access Code provided by the Avaya Communication Manager administrator followed by the E 164 extension of the system to which you want to forward the calls For example dial 22016 if 2 is the Feature Access Code and 2016 is the system E 164 Wait for confirmation beeps To deactivate call forwarding 1 From the Polycom system Place a Call screen dial the Feature Access Code provided by the Avaya Communication Manager administrator For example 2 if 2 is the Feature Access Code for disabling call forwarding Wait for confirmation beeps To transfer a call 1 While i
32. ng Camera Presets KK KK KK KK RR KK KK 11 Switching Between Full Screen Video and the Home Screen 12 Enabling Dual Monitor Emulation K KK KK RR RR KK KK 13 Showing Moving and Turning Off the PIP 0 0 15 Specifying When to Display the PIP 00 004 15 Controlling What YOurlCat 3s kany wanda kako dete ido eanee wa ieee 16 Adjustine Volume 4 sya yA ye desc lh Ek da a SEA eya WAD 0W 16 Mutine the MictOpnOne icin te a04 wah Wekl wal 0455542 haw 16 Enjoying Stereo Audio in Video Calls RR KK 17 SHOWIN COL discus cine Saye en y ek e Wen un Sed N Siv a Seba 17 Showing Content with People Content IP kk 18 Showing Content from a Computer Connected Directly to the ID XK Sy Stent A s kir mey Kak bh Gen bier OYES J ne AD eee AN 19 Polycom HDX 9006 system Polycom HDX 8000 series Polycom HDX 7000 series and Polycom HDX 6000 series 19 Polycom HDX 9004 Polycom HDX 9002 and Polycom HDX 9001 vin sa kk n y NA kal dant la k eb oul eich gue 19 Showing Content from a Document Camera VCR or DVD Player 20 Polycom Inc User s Guide for Polycom HDX Room Systems Showing Content with Polycom People on Content Controlling Recording Devices MKV KK KK KK KK KK KK KK KK KK eee Working with Directory Entries and Favorites 0 Dear chine fhe Directory y
33. nts can also set and use presets for your camera if their system supports this To allow the far site to control your camera 1 2 3 4 Select System from the Home screen Select User Settings from the System screen Scroll to Far Control of Near Camera and press O to enable the option Press A Home to save your change and return to the Home screen Changing this setting takes effect immediately even if a call is in progress Polycom Inc 4 User s Guide for Polycom HDX Room Systems Displaying the Far Site s Name When the Call Connects If your system administrator has allowed access to user settings you can specify whether to display the far site s name when the call connects and how long to leave the name on the screen To specify when to display the name of the far site 1 Select System from the Home screen 2 Select User Settings from the System screen 3 Select F Next to see more settings 4 Scroll to Far Site Name Display Time press on the remote control and select to display the far site s name during the entire call for a specified time or not at all 5 Press c Home to save your change and return to the Home screen Hearing Audio Confirmation When You Dial If your system administrator has allowed access to user settings you can set up the system to speak each number as you enter it in the dialing entry field on the Place a Call screen To enable audio confirmation 1 Select Syste
34. om Systems Logging In and Out Depending on how your system is configured you might have to log in when the system comes out of sleep mode To log in 1 When the Login screen appears press t Keyboard or use the number buttons on the remote control to enter the User ID 2 Enter the account password To enter numbers use the number buttons on the remote control To enter letters press f Keyboard on the remote control 3 Select F to log in Depending on how your system is configured you might get locked out after a certain number of failed login attempts Contact your system administrator for more information To log out 0 p gt gt Press manually Option on the remote control and select Logout to log out The system automatically logs out the current account when the system goes to sleep Using a Polycom SoundStation IP 7000 Conference Phone with a Polycom HDX System Polycom Inc When you connect a Polycom SoundStation IP 7000 conference phone to a Polycom HDX system the conference phone becomes another interface to dial audio or video calls The conference phone operates as a microphone and as a speaker in audio only calls For more information refer to the SoundStation IP 7000 documentation available on the Polycom web site To answer a call using a connected SoundStation IP 7000 conference phone gt gt Press the Answer soft key on the conference phone 35 User s
35. ople video source if you need to Participants at other sites can also show content or people video sources Depending on how your system is configured you might be able to show content that is stored on a computer When you show content from a computer the far site can see you and what you see on the computer screen When you are sending content the Gy content icon appears on your main monitor Depending on the configuration of your system you might also see the content on your monitor or projector User s Guide for Polycom HDX Room Systems Showing Content with People Content IP People Content IP allows you to send content from a computer that is not connected directly to the Polycom HDX system Points to note about People Content IP People Content IP provides video only content No audio is shared People Content IP supports any computer desktop resolution with color set to 16 bit or higher Your computer resolution can be set to anything but People Content IP scales the image to 1024x768 or 1280x720 The People Content IP application must be installed on a computer To install People Content IP on a computer 1 On a computer with a Microsoft Windows XP Windows Vista or Windows 7 operating system open a web browser and go to www polycom com ppcip Download and install the People Content IP software To start showing content 1 2 On the computer start the Polycom People Content I
36. ote control or select Options gt Delete Contact If Delete Contact is not available you highlighted a global directory entry which cannot be deleted Points to note about deleting contacts If the contact is a member of more than one group deleting it simply removes it from the group you are viewing If the contact was created locally and is nota member of any other group deleting it completely removes it from your system You cannot delete a contact that was found as a result of a directory search You cannot delete default Contacts that come from the global directory server except contacts stored with the Polycom CMA presence service To add existing contacts to Favorites from the Favorites screen You can add existing global or new entries to your Favorites 1 Q Aa OQ N Go to the Favorites screen Open the Favorites group to which you want to add contacts Select Options gt Add a Contact to add contacts to the group Select Add from Directory Find the contact that you want to add and select it To add existing contacts to Favorites from the directory You can add existing global or local entries to your Favorites 1 2 3 Press ay Directory on the remote control Open the Favorites group to which you want to add contacts Select Options gt Add a Contact to add contacts to the new group 25 User s Guide for Polycom HDX Room Systems Directory Groups 26 To add a contact to Favorites from the Re
37. ou choose Stop Viewing Site or you release chair control Return to viewing the video selected by Stop Viewing Site the chair or by the host Send your site s video to the other sites Make Me the Broadcaster Send the selected site s video to the Select other sites Broadcaster Remove the selected site from the Disconnect Site conference Disconnect all sites and end the call End Conference Participant Request control of the conference Acquire Chair View the selected site s video This does View Site not change what other sites see Return to viewing the video selected by Stop Viewing Site the chair or the host Changing the Way Calls Are Answered Temporarily Refusing Calls If your system administrator has allowed access to the Availability Control you can automatically refuse incoming calls if you do not wish to be disturbed Callers get a message that the call was rejected and you receive no notification about incoming calls You can however make outgoing calls To temporarily refuse incoming calls Do Not Disturo gt gt On the Home screen set the Availability Control to Do Not Disturb Polycom Inc 33 User s Guide for Polycom HDX Room Systems Answering Video Calls Automatically If your system administrator has allowed access to user settings you can specify whether to answer video calls automatically or to have the system announce incoming video calls and wait for you to an
38. ra or insert the videotape or DVD 20 Polycom Inc User s Guide for Polycom HDX Room Systems To start showing a document object videotape or DVD in a call 1 Press Camera on the remote control 2 Select a content source 3 Press on the remote control To stop showing a document object videotape or DVD in a call 1 Press me Camera on the remote control 2 Select the main camera 3 Press on the remote control Showing Content with Polycom People on Content The Polycom People on Content option allows you to show yourself on top of content that you are sharing The effect is similar to a weather newscast on television Contact your administrator for information about enabling or configuring People on Content Follow these guidelines when you are presenting content with People on Content e Wear solid neutral colored clothes e Avoid wearing black white or the color of your background e Make sure that the room is well lit Stand about 3 feet in front of the background to avoid casting shadows on it Polycom Inc 21 User s Guide for Polycom HDX Room Systems To show content with People on Content 1 Make sure that the content you want to show is ready 2 Press w Option on the remote control 3 Select People on Content The icons for the foreground and background video sources move up slightly on the screen The camera moves to the preset location Content is displayed in place of
39. s To view your near site presets gt gt Press PA Preset on the remote control Icons for presets 0 9 are shown on the screen The colored icons indicate stored camera positions and the gray icons indicate unassigned presets To store a preset N i b y Tn 1 If you are in a call press 7g Near or Far and then choose a near site or far site camera or other video source 2 With the camera in the desired position press and hold a number to store the preset position To store a double digit preset press the first digit quickly and hold the second number down Any existing preset stored at the number you enter is replaced The system uses preset 0 as the default camera position To delete all presets Lal a e _ 1 If you are in a call press 7g Near and then choose a near site video source 2 Press aA Preset on the remote control 3 Press and hold Delete to delete all presets You cannot delete just one preset Instead overwrite an existing preset with the new camera position Switching Between Full Screen Video and the Home Screen When the call connects the system automatically shows video on the whole screen You can switch back to the home screen during a call if for example you need to adjust a user setting and your system is configured to allow you to do so To see video in the full screen N N gt gt Press gf Near on the remote control To see the Home screen
40. s You Can Make on page 7 Call Speed Call speed to use for video calls to this site Number to use for calling the site The system s extension E 164 address 6 Select Update to add each combination of call type and number that you want to store for the site To remove the last call type added select Clear 7 Select Save to save the entry To edit an entry You can edit any contact that was created locally l1 Press an Directory on the remote control and open the Favorites group or go to the Favorites screen 2 Open the Favorites group that contains the contact you want to edit To open a group select it The name of the group that is open appears at the top of the screen for example Directory Favorites 3 Highlight the contact you want to edit Polycom Inc Polycom Inc 4 5 6 User s Guide for Polycom HDX Room Systems Select Options gt Edit Contact You cannot edit a global entry Edit the information as needed Select Save to save your changes To delete an eniry You can delete any contact that was created locally 1 Press en Directory on the remote control and open the Favorites group or go to the Favorites screen Open the Favorites group that contains the contact you want to delete To open a group select it The name of the group that is open appears at the top of the screen for example Directory Favorites Highlight the contact you want to delete Press on the rem
41. site at a time can be the chair controller Before a site can become the controller the site with control must give up control Polycom Inc 3 User s Guide for Polycom HDX Room Systems The type of host for the multipoint call and the systems in the call determine whether chair control is available Hosted by Allows chair control if Video Conferencing The call includes System e Polycom HDX systems ViewStation EX ViewStation FX VSX and VS4000 systems connected by IP H 323 ISDN H 320 or both Other systems connected by ISDN H 320 only Allowed by the bridge To use the chair control options when you are in a multipoint call 1 Onacomputer open Internet Explorer 6 x or later 2 Inthe browser address line enter the system s IP address for example http 10 11 12 13 to go to the video conferencing system s web interface 3 Click Place a Call Click Chair Control to go to the Chair Control screen The Chair Control option is only available when the system is in a multipoint call It is not available in cascaded multipoint calls 32 Polycom Inc User s Guide for Polycom HDX Room Systems 5 Select a site from the list and then use the controls in the web interface to perform one of these actions You can do this By selecting Chair controller Pass chair control to the selected sites Release Chair View the selected site s video This View Site remains in effect until y
42. swer manually Automatically answering calls is convenient but it can create security issues An unexpected caller could interrupt a meeting in progress or look at equipment and notes left in an empty room To automatically answer video calls 1 Select System from the Home screen 2 Select User Settings from the System screen 3 If you want to automatically answer incoming point to point video calls set Auto Answer Point to Point Video to Yes 4 Ifyou want to automatically answer incoming multipoint video calls set Auto Answer Multipoint Video to Yes 5 Press A Home to save your change and return to the Home screen Muting Automatically Answered Video Calls 34 If your system administrator has allowed access to user settings you can choose whether to mute the audio when automatically answered video calls connect This prevents callers from overhearing conversations or meetings After the call connects you can press g Mute on the remote control when you re ready to unmute the microphones Note that if you enable this option during a call the audio for the current meeting is not affected To mute automatically answered video calls 1 Select System from the Home screen 2 Select User Settings from the System screen 3 Scroll to Mute Auto Answer Calls and press O on the remote control to enable the option 4 Press A Home to save your change and return to the Home screen Polycom Inc User s Guide for Polycom HDX Ro
43. system is configured you might be able to search a Microsoft Office Communications Server directory view a list of Microsoft Office Communications Server contacts see if the contacts are online and call them without knowing or remembering their addresses Microsoft Office Communications Server directory searches only return an entry whose last name begins with your search string First names beginning with the search string are not returned in the results Managing Contacts Using Office Communicator 38 Office Communicator contacts appear on the Polycom HDX system Favorites screen and in the Favorites group in the directory To add or delete Office Communicator contacts on the Polycom HDX system use the Office Communicator application You can populate groups created locally ona Polycom HDX system with existing Office Communicator contacts but those changes do not appear on any other device To manage your contacts using Office Communicator 1 Log in to Office Communicator with the same user name and password specified in the SIP settings of your Polycom HDX system 2 From Office Communicator you can Add and remove contacts Add and remove groups Move contacts from group to group Changes made to contacts and groups using Office Communicator appear on the Polycom HDX system Favorites screen and in the Favorites group in the directory Polycom HDX systems support up to 200 contacts and 64 groups from Office Communicator
44. tion Support XW Chetek A at KK KK eke AY Using Avaya Network Features with Video Calls Customizing Your Workspace 44 4 149 de nbised antes d dia anaes aeawas Allowing the Far Site to Control Your Camera Displaying the Far Site s Name When the Call Connects Hearing Audio Confirmation When You Dial Adjusting for Room Lighting 0 00 0 KK KK KK KK KK Polycom Inc User s Guide for Polycom HDX Room Systems Version 3 0 This guide includes overview information that you might find helpful when you re just starting to learn about video conferencing or when you have experience but you need a quick refresher your organization Therefore this guide might cover options that you cannot access on your system To find out more about these options please talk to the administrator of your Polycom HDX system 4 Polycom HDX systems can be customized to show only those options used in This guide covers instructions for the following models Polycom HDX 8000 Series Polycom HDX 7000 Series and Polycom Polycom HDX 9000 Series HDX 6000 Series Polycom Inc User s Guide for Polycom HDX Room Systems Using the Remote Control You use the remote control to place calls adjust the volume navigate screens and select options Access onscreen help see system status in a call Store camera presets when followed by a number delet
45. tive sites that are registered with the same Global Directory Server These entries are stored on the Global Directory Server and you cannot edit them You can however add a global entry to your Favorites For information about using a Microsoft Office Communications Server directory or managing Microsoft Office Communications Server contacts refer to Using Microsoft Office Communications Server Features with Video Calls on page 38 Polycom Inc Searching the Directory Polycom Inc User s Guide for Polycom HDX Room Systems Sites that you have added are stored on your Polycom HDX system as Favorites You can remove or edit Favorites You can also assign Favorites to eroups to more easily find them Everyone at your site who uses the system can use the entries you create and you can use the entries created by others Users at other sites cannot access the Favorites on your system Polycom HDX systems support up to 1 000 Favorites They can also support one of the following Up to 200 additional Favorites with presence when registered with Microsoft Office Communications Server Up to 200 additional Favorites with presence when registered with a Polycom Converged Management Application CMA system Up to 4 000 contacts from up to 5 servers which appear in the Global Directory group when registered with to Polycom GDS server Press ay Directory on the remote control Open a specific group folder if you want to narrow
46. ute icon also appears on the monitor display 16 Polycom Inc User s Guide for Polycom HDX Room Systems Points to note about muting the microphone e Muting the microphone mutes audio coming from auxiliary audio inputs on Polycom HDX 7000 series Polycom HDX 8000 series and Polycom HDX 9000 series e Muting the microphone does not mute audio coming from any device connected to the VCR or content audio inputs e The microphone might automatically mute when the system is asleep or is waiting for you to log in e The microphone might automatically mute when the system automatically answers an incoming call e The red mute indicator on the front of the Polycom EagleEye View camera is lit whenever the camera s built in microphones are muted Enjoying Stereo Audio in Video Calls If your video conferencing room is configured to use stereo sound the left and right microphone inputs are configured during system setup It is important that you do not move the microphones as this might detract from the stereo audio experience Stereo audio is only available in video calls of 256 kbps or higher Showing Content Polycom Inc You might be able to show the following to the far sites e Any information stored on a computer A paper document or object placed on a document camera e A videotape or DVD You can show one type of content and one people video source at a time and you can switch to a different type of content or pe
47. y Your system administrator might have configured Speed Dial buttons on the Home screen To place a call to a Speed Dial entry 1 Highlight the speed dial entry you want to call on the Home screen 2 Press ey Call to place the call Contact your administrator for information about speed dial entries Calling from the Directory The directory can include a list of sites stored locally on the Polycom HDX system If the system is registered with a global directory the directory includes entries from the global directory To place a call from the directory 1 Press ay Directory on the remote control 2 Opena specific group folder to find the entry you want to call 3 Highlight the entry to call 4 Press ay Call to place the call both ISDN and IP dialing information the system might prompt you to choose which Depending on your system configuration when you make a call using an entry with way to place the call Calling from the Calendar If your HDX system is configured to connect to the Microsoft Exchange Server and the Polycom Conferencing Add In for Microsoft Outlook is installed at your site you can join a scheduled meeting from the Calendar screen If the Calendar screen is blank the system is not connected to the Microsoft Exchange Server or no meetings are scheduled To join a scheduled meeting from the Calendar screen 1 Go to the Calendar screen Select Calendar on the Home screen Select System gt Ut
48. y known as continuous presence The view switches between continuous presence and full screen depending on the interaction between the sites If multiple sites are talking at the same time continuous presence is used If one site speaks uninterrupted for at least 15 seconds that site appears in full screen on the monitor Multiple sites are displayed in continuous presence The current speaker s image is highlighted Systems with See this Single monitor Multiple sites each in its own window Dual monitors Speaker on second monitor with other sites on first monitor on the hosting system one far site on each monitor Presentation The speaker sees continuous presence while the other sites see the speaker in full screen on the monitor Systems with See this Single monitor Speaker in full screen Dual monitors Speaker on the first monitor and near site on the second monitor The site that is speaking is shown in full screen to all other sites The current speaker sees the previous speaker Using Chair Control for Multipoint Calls During some multipoint calls you can use chair control to manage the video In this type of call the chair controller can choose the site whose video is sent to other sites in the conference The chair controller can also disconnect a site or end the conference Any participant can choose to view a specific site request to be the broadcaster or request to be chair controller Only one
49. your search results Enter a name in the search field by Spelling the name using the number buttons on the remote control Spelling the name using the onscreen keyboard or by pressing Keyboard on the remote control Scroll through the list of names using the ey Up and KA Down arrow buttons or J Zoom on the remote control If the search does not start as soon as you enter a character in the search field select the 2 Search button 23 User s Guide for Polycom HDX Room Systems Adding Editing and Deleting Favorites 24 You can create Contacts and groups and save them in the Polycom HDX system directory Any changes appear in Favorites To add a Contact to Favorites l1 Press an Directory on the remote control and open the Favorites group or go to the Favorites screen 2 Ifyou have groups within Favorites make sure that you have opened the group where you want the new Contact to appear To open a group select it The name of the group that is open appears at the top of the screen for example Directory Favorites 3 Select Options gt Add a Contact Select Create Contact 5 Specify the following information Name Name that appears in the directory list and on incoming call messages The group where the new Contact appears Call Type Call type to use for calls to the site Depends on the capabilities of your system For more information about call types refer to Types of Video Call
Download Pdf Manuals
Related Search