Operating Instructions
Contents
1. Copyright 2014 KBL AG This documentation only covers products manufactured by KBL AG It must not be duplicated photocopied translated or stored without prior specific permission by KBL AG Duplication on electronic media or in machine readable form either in whole or in part is also prohibited DISCLAIMER All information given in this document correspond to the status quo at the date of publication but may be subject to changes Therefore we do not accept any liability for nor do we guarantee the accuracy and or completeness of the information Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective country of destination Export to the USA and Canada of the KBL products listed in this guide or operation of the systems in these countries are not permitted KBL does not accept any manufacturers liability in case this direction is not adhered to It is expressly pointed out that any violation of the export operation prohibition will involve substantial risks of liability for the exporter and or operator Version BA_monamie_tower_GB_B Date 05 2014 Control Software version KBL 7 01 27 Item no 0100036364 Device name tech T3 52 180 uc For instruction updates please refer to http www kbl support de KBL AG Ringstrasse 24 26 56307 Dernbach Germany Telephone 49 0 2689 9426 0 Fax 49 0 2689 9426 66 Email mon amie kbl de www kbl de A SKBL Gen2. MPS EXT z i F megaVoice MP3 int Studio MP3 ext a Operating Instructions Tower mon amie SKBL Functions overview Body fan The body fan is auto matically controlled UV tubes by ACS As soon During the session you can as you press one of switch the UV tubes on and the fan buttons the off automatic mode is interrupted Keep pressed for 2 seconds we eB megaVoice Operating Instructions Tower mon amie 19 20 SKBL AUDIO FUNCTIONS There is a maximum of three audio sources available at the user s disposal If you change over to another source you must activate it first The activation is effected by pressing the or the button All inactive audio functions are marked with OFF on the display so that you can easily recognise the active audio source MODEL ACTIVATING AUDIO FUNCTIONS MP3 INT OFF er STUDIO ACTIVATE FL D PR MP O EXT a OFF Fr Variable section of the control panel audio functions Studio zZ This function is used to play the studio music If the Studio function has been activated you can press the plus and minus buttons to browse through the channels provided that more than one channel is available MP3 internal MPs INT This function is used to play the tracks of the internal MP3 player of the tanning unit the respective first title being selected by a ran
3. The SD card slot which contains the storage medium with the MP3 data from the internal MP3 player is e Insert the card into the computer and wait for it to accessible through a maintenance hatch on the left be recognised e Copy files to the Pop directory or delete files from it hand side of the tower Operating Instructions Tower mon amie 39 SKBL ERROR MESSAGES After the error has been eliminated all error messages must be acknowledged by pressing START on the interior No 01 02 03 20 21 22 23 24 25 26 40 Status message Excess temperature bimetal Maximum tanning time Excess temperature exhaust fan KBL7 Hardware error Input Controller Maximum write cycle flash memory reached Error SD card read error CRC fault Error no access to the SD card Parameter storage not found please connect and restart Parameter storage no valid serial number CAN BUS Interior display V1 is incompatible CAN BUS preSelection dis play V1 is incompatible CAN BUS audio module full V1 is incompatible CAN BUS RGB module V1 ist incompatible Parameter storage write error Parameter storage read error Frequency detection detec tion failed Frequency detection power supply connection faulty connector X6 E6 display Description Bimetal switch triggers Enabling signal from coin box system comes in longer than the time value approved under Maximum tanning time
4. against ones of the same type The colour filter of the unit lighting must be replaced whenever the tube is replaced Dismantle the acrylic panes as it is described in the section Cleaning and replacing the acrylic panes Dismantle the tubes by turning each tube a quarter turn towards the front or towards the back and then pulling it out SKBL To clean the tubes use warm water and a chamois Do not use any aggressive detergents or agents con taining alcohol When installing new tubes replace the starters first Installing the tubes Make sure that the inscription on the tubes is visible for otherwise there will be no tanning effect The assembly is carried out in reverse order Reset the operating hours counter in the service menu Operating Instructions Tower mon amie 37 38 SKBL Replacing the unit lighting lf the device is lighted by means of high performance LED s Four Seasons these can only be replaced by a qualified specialist if they are defective In this case contact the service department If the device is lighted by means of fluorescent lights proceed as follows Tubes are located in the door and in the side parts to illuminate the device The color filter must be changed along with the tubes at the latest DOOR Loosen the door facing at one corner and slowly pull it forward with the aid of a suction cup Loosen the two screws of the door panel and lift the panel car
5. voltage remains connected Bimetal switch in the fan triggers Mainboard defective Maximum write cycle flash memory reached Update via SD card failed CRC fault Update via SD card failed access error Parameter storage not found please con nect and restart Parameter storage no valid serial number CAN BUS operators incompatible Parameter storage write error Parameter storage read error Frequency detection failed Frequency detection failed No mains volt age Operating Instructions Tower mon amie Remedy Check the air intake air discharge system Let the sunbed cool down Disconnect from the coin box system Make sure the fan runs freely Check the air intake air discharge system Let the sunbed cool down Contact your Customer Service Contact your Customer Service SD card check replace SD card check replace Check connector parameter storage replace parameter storage Contact your Customer Service Use CAN BUS operaters V2 Check connector parameter storage replace parameter storage Check connector parameter storage replace parameter storage If necessary If necessary If necessary Restart the controller Contact your Customer Service after the third unsuccessful restart Check mainboard connector X6 E6 No 205 206 210 2112 213 214 216 217 220 221 222 223 224 228 229 Info message Connection audio mod
6. 29 30 SKBL AUDIO ee Dynamic volume adapk or gt an oe I 1 EXT LE DOWN m Dynamic volume adaption on off Factory setting on SOLID TO Treble MPS USB gt 14 14 dE PT Ext 1 DOWN _ Sets the treble for MP3 USB operation Factory setting 00 dB AUDIO levee High bass MPS USE gt 14 14 dE PT Ext 1 DOWN _ Sets the high bass for MP3 USB operation Factory setting 00 dB AUDIO Low bass MPFS USE gt 14 14 dE PT Ext D DOWN _ Sets the low bass for MP3 USB operation Factory setting 07 dB AUDIO 13 27 Volume adaption Studia Line In Fe 29 dB PP Ext D DOWN _ Here you can adapt the volume of studio line in sig nal Factory setting 00 dB Operating Instructions Tower mon amie AUDIO Treble Studia Line in gt 14 14 dE Pp D Ext DOWN Sets the treble for studio music operation Factory setting 00 dB TSTORE I AUDIO ey ete High bass Studio Line in ele cn ae I EXT DOWN _ Sets the high bass for studio music operation Factory setting 00 dB SOLID TO Das Low bass Skudio Line in gt 19 149 dE PP Ext D DOWN _ Sets the low bass for studio music operation Factory setting 07 dB 38 1 EXT L DOWN _ Not available in this system STORE L AO UP AQUA Hee aquaCool spray kime P L EXT I DOWN Not available in this system AQUA Cyc
7. Information line Operating Instructions Tower mon amie 17 18 SKBL During the session you need quick access to basic functions such as volume control body fan and SUN ON OFF function You should also be in a position to change the subordinate functions The control panel caters for both requirements You have Basic functions e direct access to frequently needed functions via the Basic functions section and e access to the subordinate functions you made via the variable section of the control panel display according to the rotation principle Variable section of the control panel During the tanning session you continue to have access The basic functions portrayed here to the subordinate functions If you wish to make any refer to a fully equipped tanning bed changes you can do so in the variable section of the If you have chosen a simpler equip control panel By pressing one of the arrow buttons ment package functions from the A y above or below the changeover symbol A variable operating elements auto all available functions will be displayed one after the matically take the place of the miss other according to the rotation principle You can switch ing basic function these individual functions on or off and if possible make changes to the settings Prerequisite The functions must be available and activated in the service menu Selectable function symbols for a fully equipped unit
8. deactivates the external channel selection Factory setting bcd 23 gt 2 4 STORE I UP AUDIO A Humber of studio channels I EXT DOWN _ If bcd has been preselected the number of channels available in the studio is specified here Factory setting 4 gt an gt otf I 1 EXT DOWN If this function is active music is played nonstop i e also out of tanning sessions Factory setting off AUDIO 25 gt MP S inkernal gt Studia Line In Honskop music source PE Ext DOWN Allows for choosing the permanent audio source for the Music nonstop function Factory setting MP3 internal gt B 9 STORE I UP AUDIO 11 22 Default volume kanning I 1 EXT DOWN Sets the volume for the tanning mode Factory setting 6 en lan o S STORE I UP AUDIO 12722 Default volume standby I 1 EXT LE DOWN _ Sets the volume for the standby mode Factory setting 3 PE goo S STORE L UP AUDIO 1 To mar e ma des Ken Maximum adjustable volume PT Ext D DOWN _ Presetting the maximum adjustable sound level limits the maximum adjustable sound level in the operating and standby mode Factory setting 9 SES 09 dE STORE I UP AUDIC 14427 megalo ce volume adapk or P EXT DOWN _ Here you can adapt the volume of megaVoice Factory setting 00 dB Operating Instructions Tower mon amie
9. functions related to this item MAIN MENU a function group from the Select the desired 1 EHLIROHMENT 2 HOUR METERS 3 PRESELECT main menu by pressing AQUA the 4 UP or the 9 i ae COHGITIOHIHG DOWN button The 16 QU LEUEL currently selected group 13 EVENTLOG ee iad IS highlighted e Press the START ENTER button to access the desired group menu STORE I Up HOLA 2 ARGH J Cu 3 EXIT DOWN e The currently active function circle is displayed in the centre line on the left hand side You can invoke further functions of this group by pressing 4 UP or 9 DOWN Group Function group number AUDIO APS internal Function Settings CHANGE SETTINGS e Depending on the respective function you can change values select options and switch functions on or off To do so use the buttons 2 and 7 Example Q Jui Changing a value es STORE L UP EHUIROHHEHT AS BS FA Ss rm m Farmina Firm i E i EF OGG GG en GE am ai See EEE m CU _ ET 1 DOWN 1lmin Example Q i Selecting an option gt German d EEM sor up EHUIROHMENT Language English j Q Example By Switching a function on off SKBL STORE amp EXIT e Save your settings by pressing the button 3 STORE If you fail to do so the system will not take over the changes you made gt See also chapter Service Me
10. prescribed exposure times e lf reddening of the skin erythema occurs hours after tanning temporarily stop tanning After a week the tanning can be resumed at the beginning of the tanning table e f unexpected effects such as itching occur within 48 hours after the first tanning session you should consult a physician before tanning again e Once final tanning has been achieved additional tanning is only possible by greatly exceeding the permissible tanning times It is essential to avoid this Operating Instructions Tower mon amie e UV radiation from the sun or from UV devices can cause irreversible skin or eye damage These bio logical effects depend on the type and amount of radiation as well as on the individual sensitivity of the skin In cases of pronounced individual sensitivity or allergic reactions to UV radiation a physician should be con sulted before beginning tanning After excessive exposure to radiation the skin may exhibit sunburn Excessively repeated exposure to UV radiation of sunlight or UV appliances can result in premature ageing of the skin and in a higher risk of skin cancer e The unprotected eye can suffer from surface inflammation and in certain cases e g after a cat aract operation excessive radiation can damage the retina After many repeated sessions a cata ract may form Seek medical advice if persistent swellings or sores develop on the skin or if pigmented moles change in ap
11. tanning session 16 Operation during the tanning session 17 Variable section of the control panel 18 Basic fUNCtIONS nennen 18 Functions overview neenenennnnennnennnennnnnnnnonnne nenn nennen 19 Standby mode service mode manu 21 Layout of the display numbers 21 Switching the decorative lighting on and off 21 Invoking the service menu 21 Service menu Basics nnannnonnnennnennonnenennnneennnne 22 Operating Instructions Tower mon amie Service menu Overview neneasnnnnnnnnennnnennnnnnennenennenn 24 Personal PIN essen 25 Service MENU OPTIONS ueanneeennnnennnnennnnnnennenennenn 25 Maintenance and cleaning sssssssnnsnnnnnnnnnnnnnnnnnnn 35 Instructions for cleaning and care 35 Maintenance intervals cccceccseeceeeeeeeeeeeeeesaees 35 Cleaning and replacing the acrylic panes 36 Cleaning and replacing the tubes 37 Replacing the unit lighting nnannnnnnannannnnnnnnnennaa 38 Recording to an SD card 39 System messages uunnanunanunnnunnunnnnnunnnunnnnnnnnnnnn 40 Technical DATA nds ns nessebnssatnssngecisene 42 NS a ec ne 43 About these instructions This operating manual is intended for use by e operating staff e users e service staff Any person dealing with this tanning unit must have read and understood these instructions This manual describes units equipped with the maximum numb
12. the tower booth in such a way that the distance between your body and the surrounding lamps is about equal at any point e Put on protective goggles e The tanning session will commence automatically after the warm up time controlled by the timer has elapsed During the warm up time the tanning session can be started manually at any time by pressing the START button SKBL Operation during the tanning session You can control the functions of the device via the control panel during the tanning session It is particularly easy for you to access the basic functions Buttons with recesses that can easily be sensed allow for easy operation of the system even with your eyes closed NOTES 20 seconds after your last input the display changes over to the indication of the tanning time An information line at the bottom edge of the display informs you about currently selected features BUTTONS s ARROW BUTTONS e Control the functions i Position I recessed button A A N A subordinate functions e Allows the selection of STOP BUTTON e Stops the tanning session ano u if pressed for at least two DISPLAY e d seconds e Shows the menu items and START BUTTON functions e Starts the tanning session during the warm up e Indicates the tanning time time e as well as after an interruption caused by pressing the STOP button provided that the booked tan ning time has not elapsed yet e
13. tower To avoid overdrive select the level adjustment accordingly The level setting depends on the strength of the external signal and should be carried out by a service engineer Bluetooth connection To connect an external player smartphone etc wire lessly to the solarium an optional Bluetooth interface is available CONNECT EXTERNAL PLAYER A Bluetooth connection can be established in standby and during tanning mode D Make sure that you are within the recep tion area about 2 meters Make sure that your device is configured to search for other bluetooth devices Should this not be the case enable blue tooth manually To do so please read the instructions for your appliance SKBL e Depending on your settings the search will be performed automatically or manually All available bluetooth devices within reach will be listed after a short time e Among the available devices choose megaSun In the service menu a trailing number 01 02 03 can be added to device name e If necessary confirm the shown code and connect again Not every smart phone asks for a code Example Samsung Galaxy Example Apple iPhone Teen ce JG Bere CRT 2 Settings Bluetooth pivetoot PAIRING DEVICES DEVICES i Other device Other device Other device i Ro AVAILABLE 01 e A two time beep indicates that your device is con not connected Other device not linke
14. RE TYP gt press enter PT Ext 1 DOWN _ Submenu call with START ENTER Displays the current firmware typ variant SERUIEE FIFMMARE UERSIONS press enter Cr D Ext 1 DOWN _ Submenu call with START ENTER Displays the cur rent firmware version of the system components Do not operate the system with different firmware versions e All system components must be equipped with an identical firmware version SERVICE SOFTWARE UPLOAD gt press enter P EXT DOWN _ Submenu call with START ENTER Displays the first and the last Software Upload STORE L UP Cs RRE Sekup P L EXT I DOWN Not available in this system ER STORE I UP PIN SERWICE 68 11 SERUICE MODE press ENTER o O 1 DOWN Submenu SERVICE MODE Invoked by pressing START ENTER SUBMENU SERVICE MODE Service mode without tanning Service mode with tanning Operating Instructions Tower mon amie 33 34 SKBL STORE L O3 UDO SERUIEE ALAZ Service mode wikhouk kanning gt Skart press ENTER for 2s O D EXT DOWN Troubleshooting mode The service mode is switched on for 30 minutes The mains voltage is connected Error notifications are ignored but tanning cannot be started Service mode with kanning gt Start press ENTER for 2s CU 1 EXT DOWN Troubleshooting mode The service mode is switched on for 10 minutes The mains voltage is connected E
15. SD card See chapter Recording to an SD card Removing the SD card Insert a new original SD card Acknowledge the message by pressing START See chapter Recording to an SD card Removing the SD card If the fault persists contact your Customer Service Check power supply to the mainboard Rebuild voice folder on the SD card If necessary replace original SD card Contact your Customer Service Check tubes and thermal sensors in the door Contact your Customer Service Check tubes and thermal sensors in the door Contact your Customer Service Close door Check exhaust air Operating Instructions Tower mon amie Ai 42 SKBL Ambient conditions Installation site In dry rooms booths with sufficient airing and ventilation e max Relative air humidity lt 70 e max Room temperature lt 30 C e Minimum height of the room 2270 mm Electrical connection values Protective class Mains voltage Wire cross section Fuses Nominal power IP 20 400 V 3N 50 Hz 5 x 2 5 mm Olflex Automatic fuse K type safety cut out 3 pole 3x 25 A with residual current operated circuit breaker FI 10500 W Air discharge optional feature Fan Exhaust air hose Diameter 300 mm Minimum capacity exhaust air 2000 m h Diameter 300 mm Unit data tower mon amie UV type Ill and 0 3 W m in compliance with EN 60335 2 27 Tubes Dimensions in mm Height x Width x Depth Weight MP3 player 26x Coll
16. V of unit light necessary tubes are replaced ing Operating Instructions Tower mon amie 35 SKBL Cleaning and replacing the acrylic panes The acrylic panes can exhibit small inclusions and reams During operation hairline cracks can also develop This does not affect or hardly affects the tanning properties and does not represent a quality flaw The panes are cleaned whenever necessary When cleaning the inside it is recommended to take the occasion and clean the tubes too The instructions for cleaning and care must be observed The outer surface can be cleaned without any preparatory works The panes are dismantled as follows Push the pane centrically towards the tubes e g with your elbow and pull the upper right hand cor ner of the pane out with the help of the suction cup Take hold of the pane from behind and release the right hand side in a downward movement The pane can then be removed Operating Instructions Tower mon amie To install the pane insert its entire left hand side and press it against the aluminium section Bend the pane and push it over the right hand edge of the aluminium section Due to the pane being bent it rests in its position Cleaning and replacing the tubes By regularly cleaning the tubes see Cleaning and care instructions you can help preserve their tanning power When replacing the tubes you must also replace the starters Replace tubes and starters only
17. VIEW DOOR OPENED your tower s cr mue a one of a kind skin care system Standards This tanning system complies with the following standards in their respectively applicable version o f e EN 60335 2 27 e EMC 2004 108 EC e Low Voltage Directive 2006 95 EC 1 Door handle inside Views 2 Top crown FRONT SIDE OF THE TOWER DOOR OPENED 3 Fan casing 4 Rear wall 5 Supply connections FRONT AND TOP PART OF THE TOWER DOOR CLOSED Door Top crown Facing of unit lighting at top crown Grab handle left hand side 1 Overhead ventilation opening Display 2 Exhaust opening Rear wall O a A IN 8 Operating Instructions Tower mon amie Overview supply connections E Le m LS 1 Audio connection channel selection 2 Connection of external timer coin box system 3 Power supply Connecting the mains voltage Live components Risk of fatal injury due to electric shock when touching live parts Switch off mains voltage Protect against re connection Both the power supply and the related connection work must comply with national standards e g those set up by VDE in Germany The connection work must only be performed by qualified expert staff The connection to the 400 V mains must be protected by fuses Their specifications are listed in the chapter Technical data A residual current operated circuit breaker RCD with short time delay is absolutely r
18. agen plus 1 9 18 Item no 3230074786 26x ultimate 1901 R 180W Item no 3230076115 Equivalence key range 180 R 24 32 2 1 2 9 2180 10 x 1400 5 x 1498 5 closed 2180 10 x 1400 5 x 1958 5 opened approx 385 kg e Supports SD cards up to 1 2 GB SD 4 16 GB SDHC e Supported file system SD card FAT16 FAT32 e Supported MP3 files constant and variable bit rate 96 320 Kbit s Operating Instructions Tower mon amie SKBL 2270 TE TEE 2180 EQUIVALENCE KEY FOR UV FLUORESCENT LAMPS Marking of UV fluorescent lamps according to IEC 61228 Sample coding of a lam p Z p Use of replacement tubes The tanning tables referring to this sunbed are 1 60 R 32 3 2 only valid as long as the system is operated with the original tube set Ratio of the NMSC effective UV irradiance lt 320nm und gt 320nm NMSC Non Melanom Skin Cancer Erythema effective UV irradiance in the range of 250 400nm in mW m Reflector types O For lamps without reflector B For lamps with reflector angles wider than gt 230 N For lamps with reflector angles narrower than lt 200 R For lamps with usual reflector angles of gt 200 lt 230 Indication of Watts electrical power Operating Instructions Tower mon amie 43 SKBL 44 Operating Instructions Tower mon amie SKBL Operating Instructions Tower mon amie 45 SKBL 46 Operating Instructions Tower mon amie Tow
19. can con nect his or her own player such as an MP3 player an iPod etc Useastandard 3 5mm jack cable included if the music option has been ordered Connect the jack plug to the earphone jack of your player Then select MP3 ext as the audio source from the control panel of the tanning device before you start play ing your own tracks from the player The tracks can only be selected via the user s own player The volume can be controlled via the control panel of the tanning device and also via the corre sponding operating elements provided by the user s player Before switching on for the first time e Fix the supplied warning sign or one with the following wording permanently to the wall close to the tanning unit e Determine the presettings for the device in the service menu e Check correct installation of fluorescent tubes The tube labeling must be visible otherwise no tanning effect may be obtained e Store these Operating Instructions in a place that allows for easy access at any time Operating modes The three different operating modes are explained below STANDBY MODE The unit is in an idle state i e it is connected to the mains but is currently not being used The tubes and the tanning lamps are switched off From the standby mode you can change over to the tanning mode or to the service mode SKBL TANNING MODE The tubes and the tanning lamps are switched on and a tanni
20. d nected to the solarium Example Samsung Galaxy Example Apple iPhone s Tones JG Ber ET Settings Eduetooth Galaxy New Ea recep PAIRING DEVICES ih megaSun 01 i DEVICES connected Other device megaSun 01 Other device visible not connected Li Other device connected li TROT Me Operating Instructions Tower mon amie 11 12 SKBL e Set your device to a medium volume level and start the music e Adjust the volume level on your device e During the tanning session the volume control has to be done at the tanning device DISCONNECT EXTERNAL PLAYER An existing connection is disconnected automati cally after tanning The connection is automatically disconnected if the tanning session is not started within 6 minutes COMPATIBILITY OF BLUETOOTH DEVICES KBL AG attaches great importance to hardware com patibility Due to the large number of manufacturers KBL can not guarantee a 100 compatibility In rare cases it may happen that a bluetooth connection can not be established CORRECTIVE ACTION Each unit offers a list of paired devices Delete the older entries in this list which have a profile that over laps with the ones for which you want to pair your device Start the bluetooth device detection again Operating Instructions Tower mon amie External Players A line connection has been integrated into in the head area near the interior display so that the user
21. dom generator If the MP3 internal function has been activated press the plus and minus buttons to browse through the individual tracks Operating Instructions Tower mon amie MP3 external AUX MP3 EXT E A line connection has been integrated into in the head area near the interior display so that the user can connect his or her own player such as MP3 players iPods etc Use a standard 3 5 mm jack cable to connect the jack plug to the earphone jack of your player Use the corresponding operating elements of the external player in order to select the desired tracks With the MP3 external control element you have also access to a bluetooth connected device When the unit is in service mode you can make the presettings for operation in tanning mode and you can have values concerning the operation of the sunbed displayed While the tanning unit is in standby mode you can switch the decorative lighting of the sunbed on and off Layout of the display numbers The buttons of the interior display are allocated double functions In addition to the standard operating elements they stand for numbers that in standby mode provide access to standby and service functions Simply enter the corresponding sequence of numbers on the display SKBL Switching the decorative lighting on and off 5 0 5 NOTE The connection times of the decorative lighting can be set in the service menu individually for
22. each day of the week There are two independent connection periods A and B available for each day of the week Invoking the service menu 1X6X1XO0OX0X0X0O NOTE Do not let too much time pass between the individual keystrokes when entering a sequence of numbers Operating Instructions Tower mon amie 21 22 SKBL Service menu Basics In standby mode the service level is accessed by entering 161 followed by PIN 0000 There is one additional condition that must be fulfilled e No incoming signal from the coin box system SERVICE MENU ELEMENTS After having entered the service PIN the service STANDARD OPERATING menu is at your disposal Navigation is made via the following buttons see also chapter Layout of the display numbers e Use buttons 4 UP and 9 DOWN to browse through the individual menu items and functions e Press the START ENTER button to go to the corresponding submenu e Button 2 and 7 are used to switch functions on and off and to modify values e Press 3 STORE to save all modifications made in all menu items e Press 8 EXIT to go back to the previous menu level or to exit the service menu ON STORE UP OFF EXIT DOWN Operating Instructions Tower mon amie SERVICE MENU BASIC OPERATION The service menu is divided into the main menu and subordinate groups of functions If you choose a menu item e g AUDIO you will get access to all
23. efully out of the side guides Operating Instructions Tower mon amie ded surface There are 2 decorative tubes beneath the door panel Turn the tube a quarter turn to the right and take it out towards the front Replace the tube the colour filter if present and the starter Fasten door panel and door facing again LATERAL PARTS Dismantle the acrylic pane in the respective lateral part as described in section Cleaning and replacing the acrylic panes Remove the two front tubes in the left and right lat eral part they are marked in the illustration below Underneath you will find the lighting equipment SKBL Replace the lighting tube and if present the colour Please refer to the chapter Technical data for filter with new parts information regarding supported card sizes as well as file system and MP3 formats The card contains two ly directories Pop and Voice Within the Pop directory you can add or delete audio files as you desire These audio tracks are played if the corresponding source has been selected The number of files is limited by the storage capacity of the SD card The SD card must not be formatted the Voice directory and its contents must not be changed or deleted Re install the UV tubes and the pane RECORDING TO THE SD CARD r Attention Recording to an SD card e Do not modify any files other than those REMOVING THE SD CARD included in the POP directory
24. equired KBL AG recommends the following type KBL 3200 0770 00 type Typ ABB F 204 A 40 0 03 AP R SKBL Should the operation of the tanning unit cause any interference in the power supply network e g with ripple control systems TRA consult your power supply company to have corresponding blocking elements audio frequency suppressors installed mains connection mains connection 400V 3N 50Hz coupling box with fuses see technical data and residual current operated circuit breaker RCD with short time delay Typ ABB F 204 A 40 0 03 AP R KBL 3200077000 Connecting an external timer Connect the external timer e g coin box studio control according to the instructions supplied with the timer The following diagram shows the wiring of the timer connection A door contact is necessary for the option cabin fragrance connection timer connection to the coin box external timer Operating Instructions Tower mon amie 10 SKBL Connecting an external audio source The cinch marked in the illustration is connected to the external audio source where the line out of the sound player or the headphone loudspeaker jack are available for connection Operation using different audio sources The tanning unit can be operated using the following audio sources e An internal audio source e Various external audio sources e All available audio sources The audio source can be changed via the control
25. er of features Keep this manual ready to hand at all times Transport by forklift truck The device is mounted on a pallet e Insert the forks carefully into the openings of the pallet e Lift the load by a few centimetres e Transport the load carefully to the place of installation Overturning load Danger of being crushed by heavy parts of the equipment e Wear safety shoes Other modes of transport If a forklift truck cannot be used for transport the box must be unpacked and the parts inside must be transported individually to the place of installation e g using a dolly Depending on the weight of the components lifting them might require several people SKBL Old equipment disposal z This device consists of components that E cannot be thrown into the household garbage Dispose of your old equipment in an environmentally friendly manner after the end of its useful life Met als and plastics can be recycled Electrical and elec tronic components must be disposed of as e waste Fluorescent lamps must be dropped off at authorized collection points for pollutants This helps to avoid damaging effects to the environment and human health caused by improper disposal This makes a valuable contribution to recycling and other forms of utilization of old electrical and electronic equipment You can obtain information about environmentally friendly disposal from your local government or the municipal adm
26. er snor Anue KBL AG Ringstra e 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 E Mail mon amie kbl de www kbl de
27. eral information au2s0 2000an00nan0nnnnnnnnnnnnnnn 5 About these instructions cccseccseeeseeeeeeeeeeeeees 5 Transport by forklift truck cccseceseeeeeeeeeeeeeeeees 5 Other modes of transport 5 Old equipment disposal ccsesceseseeseeeeseeeeeaeees 5 SERVICE a ee tie ei dite 5 OS ee 6 Intended USB 6 Duties of the operator u022u022400enne nenn nenn nennen 6 Timer operation 6 General safety advice 7 Tanning times nun aa T Updating the system software ccccsseeeeeeeseeeees 7 Description of the unit 202200200n00nn0nn0nnn 8 ATIC VG Eee ee 8 OS ne anerkennen lernen 8 CONNEC HONS occ cease cscs cote nee einsehen 9 Overview supply connections 9 Connecting the mains voltage 9 Connecting an external timer 9 Connecting an external audio SOUICE 10 Operation using different audio sources 10 Connecting the channel selection 10 Level adjustment studio music Reno 11 Bluetooth connection nennen nenn nennen 11 External Players 12 D INPHEREEREDEEEELERSEFENE 13 Operating modes 13 Collagen Tanning instructions 14 Notes regarding UV tanning ern 14 Tanning UMASS ne na ia se cu 15 Collagen Tanning mode 16 Switching the display ccccccccssseesseeeeeeeeseeeeeees 16 Preselecting the type of tanning 16 Starting the
28. ff 1 8 Permanent colour selection 9 Rotation automatic change of colour in a cycle of 15 seconds Factory setting 9 Operating Instructions Tower mon amie OR EASYCARE SETTINGS press ENTER O o O D DOWN Not available in this system PERSONAL STORE I UP PIN UU LEUEL SET UU LEVEL PT EXT LD DOWN _ These settings must only be made by trained service personnel ER PIN SERVICE Load factory defaulks Reset press for Zs Loads the factory default settings PERSONAL PIN SERVICE FERSOHRL FIH press ENTER oo O 1 DOWN Submenu call with START ENTER SUBMENU SERUICES PER SOHAL FIH a PERSONAL me ENTER SOLARIUM PER SOHAL FIH I 1 EXT EL DOWN PERSONAL PIN activate deactivate Enter your personal PIN SE STORE I UP PIN SERVICE 3411 BLUETOOTH press ENTER PU EXT I DOWN Submenu BLUETOOTH Invoked by pressing START ENTER SUBMENU BLUETOOTH Name Powerlevel STORE L UP SERUICE ELUETOOTH ALAZ Hame KEL Sound gt Bi 93 Cr E EXT 7 DOWN _ To fit your Studio environment multiple units differ ent numbers can be added to the bluetooth device name megaSun xx of each solarium Factory setting 01 STORE oO UP SERVICE BLUETOOTH Hebe Powerlewel gt 1 ae fot 1 EXT 7 DOWN Sets the transmission power for bluetooth Factory setting 1 STORE UP SERUICE FIRMMIA
29. il dren e Persons with naturally red skin colour e Persons who do not tan at all or cannot tan with Operating Instructions Tower mon amie out getting sunburn e Persons who have a predisposition toward sun burn Furthermore this tanning unit has been designed for use by individuals who are in full command of their physical sensorial and mental faculties Moreover sufficient Knowledge and experience are required During the operation no other persons shell be in the radiation range of the device Children should be supervised to make sure that they do not use the unit as a toy Duties of the operator KBL AG cannot be held liable for any damage resulting from improper use of the equipment or non observance of these operating instructions Only use original replacement parts Only replace tubes and high pressure lamps with those listed on the device Otherwise this voids the operating authorization and warranty Timer operation The tanning unit must be controlled via an external timer Should the external timer fail an internal timer will switch off the system automatically after 44 minutes General safety advice e Follow all instructions given in this manual In addition observe all relevant statutory provisions and regulations also those applicable in the country of operation e The unit must only be installed and assembled by specifically trained staff e Arbitrary modifications or conversions of
30. inistrations Service For all service related questions please contact your responsible specialist dealer Operating Instructions Tower mon amie 5 SKBL This chapter provides a summary of general infor mation on safety and proper handling of the device More specific safety advice is given in other chapters of the operating manual Intended use The unit is intended to be used for the tanning of one single person at a time This person must not fall in one of the categories mentioned below otherwise using the tanning equipment is prohibited for him or her The following individuals must not use the tanning system e Persons under 18 years of age e Persons with heart pacemakers e Persons who are suffering or have suffered from skin cancer or have a predisposition toward this or those whose first degree relatives are suffering or have suffered from malignant melanoma black skin cancer e Persons taking photosensitive medications e Persons who are being treated by a physician for conditions associated with photosensitivity e Persons suffering from acute sunburn e Persons who are prone to freckles e Persons with atypical discoloured skin areas or and with more than five atypical moles with a diameter of 5 millimetres or more and persons with more than 16 moles with a diameter greater than or equal to 2 millimetres If in doubt consult a physi cian e Persons who had several severe sunburns as ch
31. le kime I 1 EXT DOWN _ Not available in this system DB Py EXT T DOWN Not available in this system De aquaCool endurance Py Ext DOWN Not available in this system 43 PP EXT D DOWN _ Not available in this system DE P ET DOWN _ Not available in this system Oe EXIT 1 DOWN 2 sec reset Not available in this system ORE I UP er AROMA As Cycle time I 1 EXT DOWN _ Not available in this system r 7 i m FE 0 F4 H Aroma cabin automatic O o TO EXT DOWN Not available in this system C AROMA Aroma cycles per hour P L EXIT DOWN Not available in this system Operating Instructions Tower mon amie 31 32 SKBL Ol ORE L UP AROMA TIMER AROMA gt press ENTER PP EXT DOWN Not available in this system DE a Heroines keske cle kark press for Zs PME Ext DOWN _ Not available in this system GD HIE CONDITIONING Aircon air conditioning I 1 EXT L DOWN _ Not available in this system 62 dl oo eS Specifies the start speed setting of the body fan STORE L Up IF CONDITIONING m Skark level body fan i PU ET EL DOWN at the beginning of the tanning Factory setting 2 63 El an o ORE I UP FGE RGE mode I 1 ET L DOWN Only for devices with LED technology fourSeasons setting options from 0 to 9 0 o
32. ll be the same for each day of the week VVeek Switching cycle A B Monday Sunday Switching cycles A B Monday Tuesday Wednesday Thursday Friday Saturday Sunday Switching cycle A Switching cycle B 08 30 12 00 14 30 22 00 Operating Instructions Tower mon amie STORE UP ENWIRONMENT TIMER CEROLIGHT press ENTER o O 1 DOWN Entering switching times for the decorative lighting TY IRS SUBMENU TIMER DECORATIV LIGTHING The submenu is invoked by pressing START ENTER SELECT DAY OF THE WEEK N EXI DOWN LY Set the time Select input e Save settings by fields pressing STORE start set STORE I Up EMWIROQHMEHT Oe gt Emin aa 45min Mas mum kanning Eime Cr DL T D DOWN _ Sets the maximum tanning time for all timers In the easyCare operating mode the setting has been fixed to 30 minutes Factory setting 44 minutes STORE L UDO HOUR METERS B14 Operating hours overall CG BF SSH I 1 EXT DOWN Displays the total operating hours STORE FUP HOUR METERS be 614 Operating hours UW cubes gt 0183h DOWN st Bill LY 2 sec reset Displays the total operating hours of the UV tubes and includes a reset function and set function to set the value in steps of five via the buttons e Save settings by pressing STORE STORE UP HOUR METERS BS 614 Operating hours collagen t
33. min 23 min 28 min 6 Session 9 min 10 min 13 min 16 min 27 min 33 min 7 Session 9 min 11 min 15 min 19 min 32 min 39 min 8 Session 10 min 12 min 16 min 21 min 36 min 44 min 9 Session 10 min 13 min 18 min 23 min 40 min 50 min 10 Session 11 min 14 min 19 min 25 min 44 min gt 55 min Max number of tan ning sessions per year Operating Instructions Tower mon amie 15 16 SKBL Switching the display By pressing the stop button in standby mode you may switch between the tanning mode preselec tion and the standard menu display After 20 sec onds the display switches back to the tanning mode preselection authomatically Preselecting the type of tanning Your Tower 16141 Arme makes it pos D sible for you to choose between pure col st lagen operation or a collagen UV mix UV amp collagen pure collagen START Operating Instructions Tower mon amie Excessive dose of UV radiation Excessively prolonged tanning sessions may cause severe damage to skin and eyes e Never operate the solarium with a defective timer e Observe the tanning times given in the tanning schedule The following explanations and functions refer to a tanning system that is fully equipped with all features Starting the tanning session During the tanning session the door must remain closed in order to ensure that the ventilation works properly e Close the door and place yourself in the middle of
34. ms may PERSONAL P N be identified by the personal PIN logo as given in the service menu Service menu options e In order to avoid operating errors read through the basics at the begin ning of the Service Menu section e Always remember to save your settings by pressing STORE e All menu items that comprise further submenus are displayed in CAPITAL LETTERS o gt German gt English STORE TP EHUIRONMENT BLAS Language Pe A ET DOWN Sets the language of the menu Factory setting German STORE I UP EHLUIROHNMENT be aS 2 BBBBB8 BBB3B Contrast PT Ext D DOWN _ Sets the contrast of the display Factory setting 00020 STORE I Up EHUIRONMENT TIHE AND DATE gt press ENTER I D EXT I DOWN Entry of date and time Invoke the submenu by pressing START ENTER SUBMENU TIME amp DATE STORE L UP EHUIRONMENTSTIME amp GATE Al Time gt BARE 23 69 P EXT DOWN Set value Store Exit Select time or date Select input fields start set STORE L UP EHUIRONMENTSTIME amp GATE BEBE Dake 13 095 48 Tu EXT EL DOWN Operating Instructions Tower mon amie 25 26 SKBL The menu item Timer decorative lighting offers you two switching cycles A and B for each day of the week NOTE SWITCHING CYCLES Using the setting monday sunday the switching cycle wi
35. n this system _ I sore up Em AUDIO lsz der Mp3 inkernal PP Ext D DOWN _ Activates and deactivates the internal MP3 player Factory setting off Operating Instructions Tower mon amie r AubTo DER megallo ce gt an gt otf T EXT DOWN Activates and deactivates the voice guidance system megaVoice Factory setting on 4 AUDIO LETE megalo ce language gt English gt German 5 L 1 EXT EL DOWN Fixes the language setting ofthe megaVoice system The following languages are fully supported GB RU DE FR IT PL CZ NL HU BG HR RO RS SK The following languages are supported in part DK EE LT NO ES SE TR without easyCare Factory setting Depending on the operator country STORE TP AUDIO Be Studia Line In gt an gt off T ET DOWN Activates and deactivates the Studio line in audio signal Factory setting on I EXT DOWN Not available in this system STORE L UP AUDIO en gt an gt otf MP Line In T ET DOWN Activates and deactivates the line in connection bench part right hand side of the head end for units from standard line level to low loudspeaker levels MP3 player iPod etc Factory setting on AUTO Poe Studia channel selection gt bed J gt puls code aT O O EXIT 1 DOWN m Allows for the change over between pulse code and BCD code mode with the Studio signal pending and
36. ng session is in progress While the unit is in tanning mode the settings for the ongoing tanning session can be changed via the control panel SERVICE MODE In the service mode the device is configured for the tanning mode Various values can be displayed and test functions can be carried out FAN RUN ON After the tanning session the fan runs on for 3 minutes in order to cool down the device The fan power is automatically decreased as the tubes cool down Operating Instructions Tower mon amie 13 14 SKBL Your tower mor me is primarily a skin care system for the targeted build up of collagen It is optionally possible however to administer a UV dose In this case follow the instructions below Notes regarding UV tanning As a rule an averagely tanning skin has achieved a uniform tan after three to five tanning sessions These sessions should take place every second day To preserve the suntan achieved one or two tanning sessions per week are normally sufficient NO SUNSCREEN WITH PROTECTION FACTOR Sunscreens with sun protection factors are unsuitable for use in a tanning salon For tanning the skin should have been thoroughly cleaned and be dry For optimum skin care we recommend using body care products after tanning GENERAL e Any person that complies with the requirements laid down in the chapter Intended use may use the device e Never exceed your personal minimum erythema dose MED Follow the
37. nu Timeout e By pressing the STORE button you save all changes you have made in all menu items STORE L UP AUDIO MPS internal OFF Ext D DOWN _ e By pressing 8 EXIT you go back to the previous menu level or you exit the service menu AUDIO MPS internal gt OFF Ext DOWN SERVICE MENU TIMEOUT After performing your last operating action you have 2 minutes left to save the changes you have made Then a prompt appears and all changes are auto matically discarded after an additional 20 seconds SERVICE MENU AUDIBLE SIGNALS For user convenience operation and storage processes are acoustically acknowledged in different ways Operation process gt short sound Storage process gt long sound Operating Instructions Tower mon amie 23 24 SKBL KBL 7 Service menu Overview 1 ENVIRONMENT 1 Language 2 Contrast TIME AND DATE 4 TIMER DECORATIVE LIGHTING 5 Maximum tanning time 2 HOUR METERS 6 Operating hours overall 7 Operating hours UV tubes Operating hours collagen tubes 9 Number of sunbath 3 PRESELECT UV Typ 41 Audio 2 Voice megaVoice 3 Aircon aircondition Aroma 5 Aqua aquaCool 4 AUDIO MP3 internal AD megaVoice megaVoice language Studio Line in usb MP3 1 MP3 external Line in Studio channel selection 3 Number of studio channels Musik nonstop 5 Nonstop music source Default volume tanning 7 Defaul
38. on the device Instructions for cleaning and care GENERAL Before starting to clean the unit take off any rings bracelets watches etc that you might be wearing in order to avoid scratching the surfaces Cleaning fluid must not run into the appliance TUBES To preserve the tanning power we recommend Cleaning the tubes and UV lamps with warm water and a chamois after approx 200 hours of operation ACRYLIC PANES For cleaning the acrylic panes use the special cleansing agent and disinfectant megaClean sup plied by KBL and dilute it in water at a ratio of 1 13 SKBL VARNISHED AND PLASTIC PARTS To clean the varnished and plastic surfaces use a damp soapy cloth Do not clean the big plastic parts with a dry cloth This might scratch the surfaces To clean the PMMA plastic surfaces of the door and the mirror plate of the floor proceed as follows Use a damp chamois and spray megaClean onto it sparingly Then wipe the surfaces clean NEVER CLEAN WITH A DRY CLOTH Prevent the corners and edges from getting wet CLEANING AGENTS The surfaces and the acrylic panes must not be cleaned with concentrated disinfectants or sol vents or other liquids that contain alcohol Maintenance intervals Component l Cleaning Replacement wearing part Tubes after Tubes and approx 200 After 500 operating starters operating hours hours l When Acrylic panes When necessary necessary Colour filters BE When Whenever U
39. panel INTERNAL MP3 PLAYER When using the internal MP3 player you can either play the music tracks that are originally supplied on the SD card or you can record your own tracks to the SD card EXTERNAL AUDIO SOURCES LINE IN As an external audio source you can connect devices ranging from the standard line level to low loudspeaker levels These sources comprise e Studio music e External players such as MP3 players mobile phones cell phones I pods etc Operating Instructions Tower mon amie EXTERNAL 100 V AUDIO SIGNAL ON STUDIO CHANNEL OPTIONAL FEATURE lf you decide for a connection to a 100 V audio system you will need a transformer KBL no 9100 0170 00 for the transmission of the audio signal This connection must be made by trained service staff Connecting the channel selection The following diagrams show the wiring of the chan nel selection on the audio equipment s side for pulse coding as well as for BCD coding Wiring on the audio system of the studio puls coding rol voltage lection o f re Q Wiring on the audio system of the studio BCD coding O Control voltage CHANNEL BCD 0 BCD 1 1 0 0 2 1 0 3 0 1 4 1 1 Level adjustment studio music The voice audio system components are installed in the back part of the tower The potentiometer which serves to adjust the external audio signal level is accessible through a maintenance hatch on the left hand side of the
40. pearance FOR EACH TANNING SESSION e Always wear the supplied protective goggles Con tact lenses or sunglasses are no substitute for the protective goggles e Remove cosmetics before tanning and do not use any sunscreen or products that accelerate tan ning e Allow for at least 48 hours to pass between sessions e After a tanning session in a studio do not take another sunbath out of doors on the same day e Protect sensitive areas such as scars tattoos and genitalia from radiation SKBL Tanning times Please refer to the following tables for learning the individually applicable tanning times that depend on the skin type For the precise definition of the skin types please refer to the supplied skin type table If the tanning ses sion sequence is interrupted for 4 weeks or more you will have to start with the first session again The interval between two tanning sessions must be at least 48 hours The times mentioned in the tanning schedules only apply on the condition that tubes are replaced according to the maintenance intervals stipulated in the section dealing with maintenance EU TANNING SCHEDULE according to UV Typ Ill and 0 3W m in compliance with EN 60335 2 27 Skin type 1 Session 6 min 6 min 6 min 6 min 6 min 6 min 2 Session 6 min 7 min 7 min 8 min 10 min 11 min 3 Session 7 min 7 min 9 min 10 min 14 min 17 min 4 Session 7 min 8 min 10 min 12 min 19 min 22 min 5 Session 8 min 9 min 12 min 14
41. rror notifica tions are ignored tanning can be started After this period there is a 3 minute restart lockout STORE L O3 UDO SERVICE SOLARTUM IDENTIFICATION 92711 gt press enter Ext DOWN Show the characteristics of the device Configuration code Variant code Serial number PIE STORE I O3 UDO SERVICE SOLARIUM CODE PU ET oY DOWN Branches to further configuration options These settings must only be made by trained service personnel Operating Instructions Tower mon amie Pt STORE L UP SERVICE Reboot gt Rebook press for Zs RI e Q Performs a restart of the electronics Attention e All unsaved changes will be discarded STORE I O3 UDO EUENTLOG ALAL E EXT DOWN Lists the latest 99 events error codes amp info messages Detailed information is available by pressing the Start button Example no time date code tanning time 001 16 44 05 01 09 0011 03 23 002 15 22 05 01 09 0002 07 22 003 10 07 22 12 08 004 17 16 005 099 Regular maintenance is required for the safe opera tion of the towers and has to be documented Clean ing is to be performed when necessary Live parts Risk of fatal injury due to electric shock when touching live parts e Disconnect from mains and secure against reconnection e USE ONLY ORIGINAL SPARE PARTS e Replace illuminants and filters only with ones wich are characterized
42. t volume standby Maximum adjustable volume megaVoice volume adaption Dynamic volume adaption G1 Treble MP3 USB 62 High bass MP3 USB 63 Low bass MP3 USB Volume adaption Studio Line In 65 Treble Studio Line In High bass Studio Line In 67 Low bass Studio Line In 5 AQUA aquaCool aquaCool spray time Cycle time aquaCool start test cycle aquaCool endurance test aquaCool start initialization Operating Instructions Tower mon amie VERSION 01 27 6 AROMA Aroma Aroma status reset Cycle time Aroma cabin automatic Aroma cycles per hour TIMER AROMA Aroma start test cycle 7 AIR CONDITIONING 61 Air condition 62 Start level body fan 8 RGB 63 RGB mode 9 69 EASYCARE 10 63 UV LEVEL 11 SERVICE Load factory defaults 67 Personal PIN BLUETOOTH Name Powerlevel FIRMWARE TYP FIRMWARE VERSIONEN SOFTWARE UPLOAD RGB Setup SERVICE MODE Service mode without tanning Service mode with tanning SOLARIUM IDENTIFICATION SOLARIUM X CODE Reboot 12 69 EVENT LOG Personal PIN In delivery condition some menu items are protected by a factory PIN Optionally the factory PIN can be replaced by a Personal PIN e You will receive the Personal PIN with the prod uct documentation e The personal PIN may be activated or deactivated by selecting the SERVICE Personal PIN setting in the service menu Every software update deactivates the Personal PIN Personal PIN secured menu ite
43. the equipment are not permissible Observe all danger signs and safety notices attached to the equipment Safety notices must not be removed and safety equipment must not be disabled or removed e The unit must only be operated when in perfect working condition e Never operate the unit with the outer covers or acrylic panes removed e The tanning system must be controlled via a timer that complies with the generally applicable standards e Absolutely observe the maintenance frequencies indicated in the maintenance plan Tanning times Adhering to tanning times and schedules is essential SKBL Updating the system software Risk of damage by switching off the power supply voltage Disconnecting power supply during the update process will lead to damage of electronic components e Make sure that the unit is not disconnected from the power supply voltage during the update To accomplish the update download the USB Con nect software offered by KBL For detailed informa tion press the help button in the main menu Operating Instructions Tower mon amie 7 SKBL Congratulations With your tower smor Amie you have purchased Lateral part right hand side Floor plate an original Collarium 9 Lateral part left hand side A combination of special collagen tubes to build up 10 Door handle the collagen deposits in your skin in conjunction with selectable UV tubes to create a subtle tan makes SIDE
44. ubes gt BlSEh P L EXT EL DOWN LY 2 sec reset Displays the total operating hours of the collagen tubes and includes a reset function and set function to set the value in steps of five via the buttons e Save settings by pressing STORE 9 HOUR METERS Humber of sumbakhs a EXIT DOWN Q 2 sec reset Indicates the number of tanning sessions sunbaths and includes a reset function Under the menu item PRESELECTION you can make the initial settings for the device The functions must be available and activated in this service menu gt 09 0D 09 68 449 69 STORE L UP FRESELECTIOM AL Abe L T UE I 1 EXT LE DOWN _ Not available in this system FRESELECTION Audio gt Studia Line In gt MPS inkernal gt MPS exkernal I EXT DOWN _ Determines the start setting of the audio source Factory setting MP3 internal STORE L O3 UDO FRESELECTIOM BS 86 Joice megaloice gt on gt otf A ET DOWN Specifies the start setting of the voice guidance system Factory setting on Operating Instructions Tower mon amie 28 SKBL STORE L UP FRESELECTIOM HABE Aircon Aircandiktian PE Ext DOWN Not available in this system STORE L UDO FRESELECTION BS Be Aroma I 1 EXT DOWN _ Not available in this system STORE I UP FRESELECTION H que aqua Cool J P EXT LE DOWN _ Not available i
45. ule faulty Connection inside display faulty Low battery charge please renew Connection RGB module faulty SD card missing SD card unreadable Error voltage supply please check No voice files on the SD card pleas check OW to many sensors OW sensor Typ B missing OW sensor Typ S missing OW sensor read error Check tubes and temperature sensor in the door delta gt 12 Check tubes and temperature sensor in the door temp lt 30 Pleas close the door check exhaust air SKBL INFORMATION MESSAGES Description Communication between control and mod ule display has been interrupted Button cell CR 2032 of the control board discharged Communication between control and bus module has been interrupted No SD card in the audio module SD card defective incompatible content Power supply to the mainboard varies No voice files on the SD card found General OneWire sensor error Temperature difference to high between the one wire sensors Minimum temperature is not reached or is fallen below in operation mode Temperature rise of 1 5 degrees in 18 sec onds Remedy Check replace the patch cable Acknowledge the message by pressing START If the fault persists contact your Customer Service Replace the button cell CR 2032 Check replace the patch cable Acknowledge the message by pressing START If the fault persists contact your Customer Service Insert an original
Download Pdf Manuals
Related Search