Operating Instructions
Contents
1. OE nenn D ee Aroma sc bes Ecycle Skart press for Zs Ext I DOWN Starts the Aroma test 1 cycle CD STORE FUP O AIE COHDITIOHING Aircon air conditioning PP Ext 1 DOWN _ Not available in this system 62 Specifies the start speed setting of the body fan STORE I O3 UDO AIE CONLITIOHNING Skart level body fan P EXT DOWN _ at the beginning of the tanning Factory setting 2 63 RGE mode RGB Pp Ext DOWN Not available in this system Note For devices with LED technology the desired RGB color mode is adjusted by the colorMotion controller EAS YCARE SEITINES gt press EHTER O o CO Ext T DOWN Not available in this system megaSun ER STORE I UP PIN UU LEVEL ILA SET UU LEVEL Sear These settings must only be made by trained service personnel ER ORE UP PIN SERVICE al Load factory defaults Resek press hanes On DOWN _ Loads the factory default settings PERSONAL PIN SERWICE PERSOHMAL FIN gt press EHTER O o CO Ext T DOWN Submenu call with START ENTER SERVICE PERSONAL PIH 81 81 ENTER SOLARIUM PERSONAL PIN gt PIN PERSONAL PT Ext 1 DOWN PERSONAL PIN activate deactivate Enter your personal PIN SERVICE FIR MEIARE TYP gt press enker py EX 1 DOWN Submenu call with START ENTER Displays the current firmware typ variant2. megaSun space 3000 Operating Instructions Copyright 2013 KBL AG This documentation only covers products manufactured by KBL AG It must not be duplicated photocopied translated or stored without prior specific permission by KBL AG Duplication on electronic media or in machine readable form either in whole or in part is also prohibited megaSun is a registered trademark of KBL AG DISCLAIMER All information given in this document correspond to the status quo at the date of publication but may be subject to changes Therefore we do not accept any liability for nor do we guarantee the accuracy and or completeness of the information Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective country of destination Export to the USA and Canada of the KBL products listed in this guide or operation of the systems in these countries are not permitted KBL does not accept any manufacturers liability in case this direction is not adhered to It is expressly pointed out that any violation of the export operation prohibition will involve substantial risks of liability for the exporter and or operator Version BA_space3000_GB_C Date 11 2013 Control Software version KBL 7 01 13 Item no 0100036352 For instruction updates please refer to http www kbl support de KBL AG Ringstrasse 24 26 56307 Dernbach Germany Telephone 49 0 2689 9426 0 Fax 49 0 2689
3. Operating Instructions megaSun space 3000 Caution Place the door panel carefully on a pad ded surface There are 2 decorative tubes beneath the door panel Turn the tube a quarter turn to the right and take it out towards the front Replace the tube the colour filter if present and the starter Fasten door panel and door facing again LATERAL PARTS Dismantle the acrylic pane in the respective lateral part as described in section Cleaning and replacing the acrylic panes Remove the two front tubes in the left and right lat eral part they are marked in the illustration below Underneath you will find the lighting equipment Replace the lighting tube and if present the colour filter with new parts Bi i n Re install the UV tubes and the pane Recording to an SD card REMOVING THE SD CARD The SD card slot which contains the storage medium with the MP3 data from the internal MP3 player is accessible through a maintenance hatch on the left hand side of the tower megaSun Please refer to the chapter Technical data for information regarding supported card sizes as well as file system and MP3 formats The card contains two directories Pop and Voice Within the Pop directory you can add or delete audio files as you desire These audio tracks are played if the corresponding source has been selected The number of files is limited by the storage capacity of the SD card The SD card
4. 2 sec reset Displays the total operating hours of the UV tubes and includes a reset function and set function to set the value in steps of five via the buttons e Save settings by pressing STORE STORE I O3 Up CT HOUR METERS bS84 Operating hours collagen cubes Pe TEX DOWN SS Not available in this system 2 sec reset megaSun adad HOUR METERS Humber of sumbakhs PXT DOWN LY 2 sec reset v Indicates the number of tanning sessions sunbaths and includes a reset function Under the menu item PRESELECTION you can make the initial settings for the de vice The functions must be available and activated in this service menu 46 47 9 68 44 60 STORE I O3 UDO FRESELECTIOM ALJAS LHT YE I 1 EXT DOWN _ Not available in this system STORE I UP FRESELECTION A Audio ay PP Ext 1 DOWN _ Determines the start setting of the audio source Factory setting MPS3 internal 2 STORE I O3 UDO FRESELECTIOMN BSH Joice megatorce T ET T DOWN Specifies the start setting of the voice guidance system Factory setting on Operating Instructions megaSun space 3000 25 megaSun __ STORE I UP STORE UP FEESELECTIOH B4 He AUDIO a Aircon Aircandikian megalo ce Ss O A Ext DOWN Not available in this system Activates and deactivates the voice guidan
5. Operating Instructions megaSun space 3000 31 megaSun SERVICE FIRMIMIARE VERSIONS gt press enter PT Ext 1 DOWN _ Submenu call with START ENTER Displays the cur rent firmware version of the system components Do not operate the system with different firmware versions All system components must be equipped with an identical firmware version Pt SERVICE SIFTHARE UPLOAD gt press enker PT ET DOWN Submenu call with START ENTER Displays the first and the last Software Upload SERVICE RGE Sekup a s ET DOWN Not available in this system PERSONAL PIN SEEITEE SERUICE MODE gt press ENTER O o O EXT T DOWN Submenu SERVICE MODE Invoked by pressing START ENTER Service mode without tanning Service mode with tanning Operating Instructions megaSun space 3000 Service mode withouk kanning gt Start press ENTER for 2s I 17 EXIT CT DOWN _ U Troubleshooting mode The service mode is switched on for 30 minutes The mains voltage is connected Error notifications are ignored but tanning cannot be started Service mode wich kanning ark press ENTER for 2s P EXT DOWN _ Troubleshooting mode The service mode is switched on for 10 minutes The mains voltage is connected Error notifications are ignored tanning can be started After this peri od there is a 3 minute restart lockout SERUTEE SOLARIUM IDEMTIFICATION gt pr
6. airing and ventilation e max Relative air humidity lt 70 e max Room temperature lt 30 C e Minimum height of the room 2270 mm Electrical connection values IP 20 400 V 3N 50 Hz 5 x 2 5 mm Olflex Automatic fuse K type safety cut out 3 pole 3x 25 A with residual current operated circuit breaker FI 10500 W Air discharge optional feature Diameter 300 mm Minimum capacity exhaust air 2000 m h Diameter 300 mm Unit data megaSun space 3000 UV type 3 and 0 3 W m in compliance with EN 60335 2 27 52x ultimate 1902 R 180W Item no 3230076080 Equivalence key range 180 R 17 22 1 8 2 4 2180 10 x 1400 5 x 1498 5 closed 2180 10 x 1400 5 x 1958 5 opened approx 390 kg Supports SD cards up to 1 2 GB SD 4 16 GB SDHC e Supported file system SD card FAT16 FAT32 Supported MP3 files constant and variable bit rate 96 320 Kbit s Operating Instructions megaSun space 3000 megaSun by KBL VIEWS 2m GGG GN u 1498 atidi u Lana EQUIVALENCE KEY FOR UV FLUORESCENT LAMPS Marking of UV fluorescent lamps according to IEC 61228 Sample coding of a lam i d p Use of replacement tubes The tanning tables referring to this device are 1 60 R 32 3 2 only valid as long as the system is operated with the original tube set Ratio of the NMSC effective UV irradiance lt 320nm und gt 320nm NMSC Non Melanom Skin Cancer Erythema effect
7. included if the music option has been ordered Connect the jack plug to the earphone jack of your player Then select MP3 ext as the audio source from the control panel of the tanning device before you start play ing your own tracks from the player The tracks can only be selected via the user s own play er The volume can be controlled via the control panel of the tanning device and also via the corre sponding operating elements provided by the user s player megaSun aquaCool box connections a aA i ER aquaCool liquid E aquaCool air blue Aroma 4 Mains voltage aquaCool box Ba Data cable Tower aquaCool Box Connections aquaCool box tower aquaCool box Operating Instructions megaSun space 3000 11 megaSun Before switching on for the first time e Fix the supplied warning sign or one with the following wording permanently to the wall close to the tanning unit e Determine the presettings for the device in the service menu e Check correct installation of fluorescent tubes The tube labeling must be visible otherwise no tanning effect may be obtained e Store these Operating Instructions in a place that allows for easy access at any time Operating modes The three different operating modes are explained below STANDBY MODE The unit is in an idle state i e it is connected to the mains but is currently not being used The tubes and the tanning lamps are switched off Fro
8. prescribed exposure times f reddening of the skin erythema occurs hours af ter tanning temporarily stop tanning After a week the tanning can be resumed at the beginning of the tanning table e f unexpected effects such as itching occur within 48 hours after the first tanning session you should consult a physician before tanning again Once final tanning has been achieved additional tanning is only possible by greatly exceeding the permissible tanning times It is essential to avoid this e UV radiation from the sun or from UV devices can cause irreversible skin or eye dama These biolog ical effects depend on the type and amount of ra diation as well as on the individual sensitivity of the skin megaSun In cases of pronounced individual sensitivity or allergic reactions to UV radiation a physician should be con sulted before beginning tanning e After excessive exposure to radiation the skin may exhibit sunburn Excessively repeated exposure to UV radiation of sunlight or UV appliances can result in premature ageing of the skin and in a higher risk of skin cancer e The unprotected eye can suffer from surface in flammation and in certain cases e g after a cat aract operation excessive radiation can damage the retina After many repeated sessions a cata ract may form e Seek medical advice if persistent swellings or sores develop on the skin or if pigmented moles change in appearance On
9. the decorative lighting can be set in the service menu individually for each day of the week There are two independent connection periods A and B available for each day of the week aquaCool spraying test 4 9 4 Invoking the service menu 000 00 00 NOTE Do not let too much time pass between the individual keystrokes when entering a sequence of numbers Operating Instructions megaSun space 3000 19 megaSun 20 Service menu Basics In standby mode the service level is accessed by entering 161 followed by PIN 0000 There is one additional condition that must be fulfilled e No incoming signal from the coin box system SERVICE MENU ELEMENTS After having entered the service PIN the service STANDARD OPERATING menu is at your disposal Navigation is made via the following buttons see also chapter Layout of the display numbers e Use buttons 4 UP and 9 DOWN to browse through the individual menu items and functions e Press the START ENTER button to go to the corresponding submenu e Button 2 and 7 are used to switch functions on and off and to modify values e Press 3 STORE to save all modifications made in all menu items e Press 8 EXIT to go back to the previous menu level or to exit the service menu ON STORE UP I moms oh Oe S n vty x q 1 wan p Seat ba Pe x lA x a 4 RESET ENTER OFF EXIT DOWN Operating Inst
10. the tracks of the internal MP3 player of the tanning unit the respective first title being selected by a random generator If the MP3 internal function has been activated press the plus and minus buttons to browse through the individual tracks Operating Instructions megaSun space 3000 MP3 external AUX MP3 EXT F A line connection has been integrated into in the head area near the interior display so that the user can connect his or her own player such as MP3 players iPods etc Use a standard 3 5 mm jack cable to connect the jack plug to the earphone jack of your player Use the corresponding operating elements of the external player in order to select the desired tracks While the tanning unit is in standby mode you can switch the decorative lighting of the device on and off and trigger an aquaCool spraying test 1 spraying cycle When the unit is in service mode you can make the presettings for operation in tanning mode and you can have values concerning the operation of the device displayed Layout of the display numbers The buttons of the interior display are allocated double functions In addition to the standard operating elements they stand for numbers that in standby mode provide access to standby and service functions Simply enter the corresponding sequence of numbers on the display megaSun Switching the decorative lighting on and off 9 0 5 NOTE The connection times of
11. up time the tanning session can be started manually at any time by pressing the START button An information line at the bottom edge of the display informs you about currently selected features BUTTONS sT ae Control the functions Position y 5 recessed button ARROW BUTTONS Allows the selection of subordinate functions STOP BUTTON aa the _ session START BUTTON IT pressed 10r at past Iwp oe Starts the tanning session during the warm up seconds Shows the menu items and ds functions as well as after an interruption caused by pressing the STOP button provided that the booked tan ning time has not elapsed yet Indicates the tanning time Information line Operating Instructions megaSun space 3000 15 megaSun 16 During the tanning session you need quick access to basic functions such as volume control body fan and aquaCool You should also be in a position to change the subordinate functions The control panel caters for both requirements You have Basic functions direct access to frequently needed functions via the Basic functions section and access to the subordinate functions you made via the variable section of the control panel display according to the rotation principle Variable section of the control panel During the tanning session you continue to have access The basic functions portrayed here to the subordinate functions If you
12. wish to make any refer to a fully equipped tanning bed changes you can do so in the variable section of the If you have chosen a simpler equip control kanal By pressing one of the arrow buttons ment package functions from the A v above or below the changeover symbol A variable operating elements auto s all available functions will be displayed one after the matically take the place of the miss other according to the rotation principle You can switch ing basic function these individual functions on or off and if possible make changes to the settings Prerequisite The functions must be available and activated in the service menu Selectable function symbols for a fully equipped unit Hi P Aroma ME Voice MP3 intern Studio MP3 extern MP3 EXT F Operating Instructions megaSun space 3000 megaSun Functions overview Aquacool Body fan An ongoing spraying process cannot be stopped The body fan is auto If the aquaCool supply is running low a corre a matically controlled sponding message is displayed in the standby mode After the message has appeared for the by ACS As soon as first time the aquaCool supply will last for approx you press one of the imately another 2 5 hours of operation If the sys fan buttons the au tem has run out of aquaCool liquid the aquaCool function is deactivated automatically and the symbol shown below is displayed a tomatic mode is in terrupted aqua
13. 9426 66 Email megaSun kbl de www megaSun de megaSun A General information ie 5 About these instructions ccccseceseeeeeeeeeeeeeeenes 5 Transport by forklift truck ccccecessecseeeeeeeeeeeenes 5 Other modes of tranSport cc cscesssecseeeeseeeeeeees 5 Old equipment disposal ccceeceeeeeeeeeeeseeeeeeeees 5 S AT a E AAE EA A E 5 Safety notes ssssnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnna 6 Intended USC ccccecceeeceeeeeseesaeeeeeeeeeeeeeeeeeeeeseeenes 6 Duties of the operator ccccseccceeeceeeceeeeeeeeeeeeeees 6 Timer operation cccccccecceseecseeeeeeceeeeeseesaeeeeenenes 6 General safety AAVICE cccceeccceseeceseeeeeeeseeeesaaees 7 TANNING times cccccceecceeeceseecaeeeeeeeeeeeeseesaeeeneeenes 7 Updating the system software cccsseeeeeeeneeeees 7 Description of the unit ccsccsscesccsenseeneensensenes 8 SIGN Clo reneite ss en nee ee 8 VO W ES ee a ae ee er re nee 8 CONNECTIONS eects eeepc ensceavececsscevseccsesesseeescais 9 Overview supply CONNECTIONS c ceeeeeeeeeeeees 9 Connecting the mains VOItaGE cccccseeeseeeeeeeees 9 Connecting an external timer ccccsseeeeeeeeeeees 9 Connecting an external audio SOUICE 10 Operation using different audio sources 10 Connecting the channel selection 10 Level adjust
14. Cool is automatically re activated as soon as Keep pressed a full canister has been connected for 2 seconds pta dY aquaCool Aroma manual control Alternative to automatic operation aquaCool and Aroma can also be started manually Service menu settings i e With activated aquaCool the point Agua cycle time must be set to manual Aroma megaVoice e With deactivated aquaCool the point Aro ma cycle time must be set to manual By pressing the aquaCool or Aroma plus button a spray cycle can be triggered Operating Instructions megaSun space 3000 17 megaSun 18 AUDIO FUNCTIONS There is a maximum of three audio sources available at the user s disposal If you change over to another source you must activate it first The activation is effected by pressing the or the button All inactive audio functions are marked with OFF on the display so that you can easily recognise the active audio source MODEL ACTIVATING AUDIO FUNCTIONS MPs INT OFF a ree STUDIO ACTIVATE FL gt A hIP3 O EXT OFF E F Variable section of the control panel audio functions This function is used to play the studio music If the Studio function has been activated you can press the plus and minus buttons to browse through the channels provided that more than one channel is available MP3 internal MPs INT This function is used to play
15. PIN setting in the service menu Every software update deactivates the Personal PIN Personal PIN secured menu items may PERSONAL P N be identified by the personal PIN logo as given in the service menu Service menu options e In order to avoid operating errors read through the basics at the begin ning of the Service Menu section e Always remember to save your settings by pressing STORE e All menu items that comprise further submenus are displayed in CAPITAL LETTERS STORE I 3 Up CT EHUITROHMENT ALHS Language I EXT DOWN Sets the language of the menu Factory setting German megaSun STORE I 3 Up CT EHUIR OHMENT 25 Contrast o T Ext 1 DOWN _ Sets the contrast of the display Factory setting 00020 EHUTEOMMENT TIHE AHD CATE gt press EHTER 3 ST STORE I VE PP Ext DOWN pressing START ENTER STORE UP EHUTROHNHMENT TIME amp DATE BIL BZ T me C 1 EXT DOWN Te Et i i i i Et en Faru een Set value Store Exit Select time or date Select input fields start set STORE I O3 UP EMHWIROQHMENMT TIME amp GATE 82 he2 Dake P EXT DOWN Operating Instructions megaSun space 3000 23 megaSun The menu item Timer decorative lighting offers you two switching cycles A and B for each day of the week NOTE SWITCHING CYCLES Using the setting monda
16. ating Instructions megaSun space 3000 colorMotion controller Decorative lighting On Off Program selection switch colorWheel Brightness or frequency increase decrease colorMotion controller control elements On Off Decorative lighting The selected setting automatically will be saved when the system is switched off Program selection switch Program Mode Note 1 RED 2 GREEN 3 BLUE MEN ee 5 PURPLE 6 CYAN 7 WHITE 8 3 color jump 9 7 color jump 10 3 color gradient 11 3 color smooth 12 7 color gradient Frequency 13 7 color smooth adjustable 13 3 color flicker Repetition rate 15 7 color flicker 16 3 color flash 17 7 color flash 18 Auto play colorWheel By touching the colorWheel the selected color switches on and additionally the pro gram selection will be reset At the next program selection the program 1 RED will start Increases decreases the intensity of the static colors Program 1 7 Increases decreases the repetition rate Program 8 18 Regular maintenance is required for the safe opera tion of the towers and has to be documented Clean ing is to be performed when necessary Live parts Risk of fatal injury due to electric shock when touching live parts e Disconnect from mains and secure against reconnection e USE ONLY ORIGINAL SPARE PARTS e Replace illuminants and filters only with ones wich are characterized on the de
17. be in the radiation range of the device Children should be supervised to make sure that they do not use the unit as a toy Duties of the operator KBL AG cannot be held liable for any damage resulting from improper use of the equipment or non observance of these operating instructions Only use original replacement parts Only replace tubes and high pressure lamps with those listed on the device Otherwise this voids the operating authorization and warranty Timer operation The tanning unit must be controlled via an external timer Should the external timer fail an internal timer will switch off the system automatically after 44 minutes General safety advice Follow all instructions given in this manual In addition observe all relevant statutory provisions and regulations also those applicable in the country of operation The unit must only be installed and assembled by specifically trained staff Arbitrary modifications or conversions of the equipment are not permissible Observe all danger signs and safety notices attached to the equipment Safety notices must not be removed and safety equipment must not be disabled or removed The unit must only be operated when in perfect working condition Never operate the unit with the outer covers or acrylic panes removed The tanning system must be controlled via a timer that complies with the generally applicable standards Absolutely observe the maintenance frequ
18. by pressing the button 3 STORE If you fail to do so the system will not take over the changes you made gt See also chapter Service Menu Timeout e By pressing the STORE button you save all changes you have made in all menu items STORE A UP AUDIO MPS internal OFF PE Ext d DOWN e By pressing 8 EXIT you go back to the previous menu level or you exit the service menu aes AUDIO MPS inkernal gt OFF Ext DOWN SERVICE MENU TIMEOUT After performing your last operating action you have 2 minutes left to save the changes you have made Then a prompt appears and all changes are auto matically discarded after an additional 20 seconds SERVICE MENU AUDIBLE SIGNALS For user convenience operation and storage processes are acoustically acknowledged in different ways Operation process gt short sound Storage process gt long sound Operating Instructions megaSun space 3000 21 megaSun 22 KBL 7 Service menu Overview VERSION 01 13 1 ENVIRONMENT 1 Language 2 Contrast TIME AND DATE TIMER DECORATIVE LIGHTING 5 Maximum tanning time 2 HOUR METERS 6 Operating hours overall 7 Operating hours UV tubes Operating hours collagen tubes 9 Number of sunbath 3 PRESELECT UV Typ 41 Audio 2 Voice megaVoice 3 Aircon aircondition Aroma 5 Aqua aquaCool 4 AUDIO MP3 internal AD megaVoice megaVoice language Studio Lin
19. ce system megaVoice Factory setting on 18 1 STORE I UP AUDIO LETE STORE Tp FRESELECTION HS 86 Aroma megallo ce language P EXT DOWN _ I 1 EXT DOWN _ Fixes the language setting ofthe megaVoice system Defines the start setting of Aroma The following languages are fully supported GB RU DE FR IT PL CZ NL HU BG HR RO RS SK The following languages are supported in part DK EE LT NO ES SE TR without easyCare Factory setting on 15 ZEE en a Factory setting Depending on the operator country a que aqua Cool J STORE I UP ADIO I 1 EXT d DOWN _ Studia Line In Specifies the start setting of aquaCool PT Ext 1 DOWN _ Activates and deactivates the Studio line in audio Factory setting on signal Factory setting on STORE I UP AUDIO AS Ase usb MPS STORE I O3 UDO AUDIO Alefee MpS inkernal PP Ext 1 DOWN _ I 1 EXT DOWN Activates and deactivates the internal MP3 player Not available in this system Factory setting off 26 Operating Instructions megaSun space 3000 STORE I UP AUDIO MP Line In zu Pp Ext DOWN Activates and deactivates the line in connection bench part right hand side of the head end for units from standard line level to low loudspeaker levels MP3 player iPod etc Factory setting on AUDIO fade ele Studia channel selection P EXT DOWN _ Al
20. chapter Refilling Aroma and aquacool aquaCool canister empty System has run out of scent Button cell CR 2032 of the control board discharged Replace the button cell CR 2032 Check replace the patch cable Acknowledge the message by pressing START Ifthe fault persists contact your Customer Service Insert an original SD card No SD card in the audio module See chapter Recording to an SD card Removing the SD card Insert a new original SD card Acknowledge the message by pressing START See chapter Recording to an SD card Removing the SD card If the fault persists contact your Customer Service e Communication between control and bus module has been interrupted SD card defective incompatible content SS Power supply to the mainboard varies Check power supply to the mainboard Rebuild voice folder on the SD card If necessary replace original SD card Temperature difference to high between Check tubes and thermal sensors in the door Contact the one wire sensors your Customer Service ure Minimum temperature is not reached or is Check tubes and thermal sensors in the door Contact fallen below in operation mode your Customer Service ck Temperature rise of 1 5 degrees in 18 sec onds gt No voice files on the SD card found Close door Check exhaust air Operating Instructions megaSun space 3000 43 megaSun 4A Ambient conditions In dry rooms booths with sufficient
21. cked and the parts inside must be transported individually to the place of installation e g using a dolly Depending on the weight of the components lifting them might require several people megaSun Old equipment disposal Kf This device consists of components that E cannot be thrown into the household garbage Dispose of your old equipment in an environmentally friendly manner after the end of its useful life Metals and plastics can be recycled Electrical and electron ic components must be disposed of as e waste Flu orescent lamps must be dropped off at authorized collection points for pollutants This helps to avoid damaging effects to the environment and human health caused by improper disposal This makes a valuable contribution to recycling and other forms of utilization of old electrical and electronic equipment You can obtain information about environmentally friendly disposal from your local government or the municipal administrations Service For all service related questions please contact your responsible specialist dealer Operating Instructions megaSun space 3000 5 megaSun This chapter provides a summary of general infor mation on safety and proper handling of the device More specific safety advice is given in other chapters of the operating manual Intended use The unit is intended to be used for the tanning of one single person at a time This person must not fall in one of the ca
22. ctory setting on GD O T ET DOWN Sets the treble for MP3 USB operation Factory setting 00 dB AUDIO Levee High bass MPS USB Pp A Ext DOWN Sets the high bass for MP3 USB operation Factory setting 00 dB AUDIO S22 Low bass MPS USE A ET DOWN Sets the low bass for MP3 USB operation Factory setting 07 dB STORE I UP AUDIO ewes Volume adaption Studia Line In PP Ext 1 DOWN _ Here you can adapt the volume of studio line in sig nal Factory setting 00 dB Operating Instructions megaSun space 3000 STORE TP AUDIO z Treble Studia Line in T ET DOWN Sets the treble for studio music operation Factory setting 00 dB SIORE UP AUDIO 222 High bass Studio Line in PE EXT DOWN _ Sets the high bass for studio music operation Factory setting 00 dB AUDIO eeree Low bass Skudio Line in o O Ext 1 DOWN _ Sets the low bass for studio music operation Factory setting 07 dB 38 I 1 EXT DOWN _ Activates and deactivates the aquaCool function Factory setting off STORE I AO UP AQUA Hee aquaClool spray kime P L EXT DOWN Determines the duration of the aquaCool spraying time Factory setting 6 STORE I O3 Up SC AQUA BSH Cycle time I 1 ET DOWN Defines the aquaCool and aroma cycle time spray ing time spraying interval If manual is selected by pressing the aq
23. e cabinet scent release can be set at intervals controlled by a door contact switch or completely deactivated Factory setting off Operating Instructions megaSun space 3000 29 megaSun amp STORE I UP a AROMA asa Arama cycles per hour I 1 EXT DOWN _ For interval operation of the cabinet scent released the number of scent releases per hour can be set here Factory setting 3 The menu item TIMER AROMA offers you PR a switching cycle for each day of the week NOTE SWITCHING CYCLES Using the setting monday sunday the switching cycle will be the same for each day of the week VVeek Switching cycle Monday Sunday Day Switching cycles Monday Tuesday lt Wednesday lt Thursday Friday Saturday Sunday 08 30 20 00 30 Operating Instructions megaSun space 3000 STORE Up AROMA TIMER AROMA gt press ENTER Pp T EXT T DOWN Entering switching times for the Aroma Timer The submenu is invoked by pressing START ENTER SELECT WEEK OR DAY OF THE WEEK STORE TI AR OMANTIMER AROMA i PRESS ENTER P EXT DG S gt ENTER SWITCHING TIME STORE I UU AROMASTIMER AROMA A CERE aue i pa ee a a E C T Ar DON D STORE FUP ARC STG AROMA Ae As FF a _EXIT DOWN Set the time Select input e Save settings by fields pressing STORE start set
24. e in usb MP3 1 MP3 external Line in Studio channel selection 3 Number of studio channels Musik nonstop 5 Nonstop music source Default volume tanning 7 Default volume standby Maximum adjustable volume megaVoice volume adaption Dynamic volume adaption G1 Treble MP3 USB 62 High bass MP3 USB 6 Low bass MP3 USB Volume adaption Studio Line In 65 Treble Studio Line In High bass Studio Line In 67 Low bass Studio Line In 5 AQUA aquaCool aquaCool spray time Cycle time aquaCool start test cycle aquaCool endurance test aquaCool start initialization Operating Instructions megaSun space 3000 6 AROMA Aroma Aroma status reset Cycle time Aroma cabin automatic Aroma cycles per hour TIMER AROMA Aroma start test cycle 7 AIR CONDITIONING 61 Air condition 62 Start level body fan 8 RGB 63 RGB mode 9 64 EASYCARE 10 65 UV LEVEL 11 SERVICE Load factory defaults 67 Personal PIN FIRMWARE TYP FIRMWARE VERSIONEN SOFTWARE UPLOAD RGB Setup SERVICE MODE Service mode without tanning Service mode with tanning SOLARIUM IDENTIFICATION SOLARIUM X CODE Reboot 12 6 EVENT LOG Personal PIN In delivery condition some menu items are protected by a factory PIN Optionally the factory PIN can be replaced by a Personal PIN You will receive the Personal PIN with the prod uct documentation The personal PIN may be activated or deactivated by selecting the SERVICE Personal
25. e technical data and residual current operated circuit breaker RCD with short time delay Typ ABB F 204 A 40 0 03 AP R KBL 3200077000 o o Connecting an external timer Connect the external timer e g coin box studio control according to the instructions supplied with the timer The following diagram shows the wiring of the timer connection A door contact is necessary for the option cabin fragrance connection timer connection to the coin box external timer Operating Instructions megaSun space 3000 9 megaSun 10 Connecting an external audio source The cinch marked in the illustration is connected to the external audio source where the line out of the sound player or the headphone loudspeaker jack are available for connection Operation using different audio sources The tanning unit can be operated using the following audio sources e An internal audio source e Various external audio sources e All available audio sources The audio source can be changed via the control panel INTERNAL MP3 PLAYER When using the internal MP3 player you can either play the music tracks that are originally supplied on the SD card or you can record your own tracks to the SD card EXTERNAL AUDIO SOURCES LINE IN As an external audio source you can connect devices ranging from the standard line level to low loudspeaker levels These sources comprise Studio music External players s
26. encies indicated in the maintenance plan Tanning times Adhering to tanning times and schedules is essential megaSun Updating the system software ATTENTION Risk of damage by switching off the power supply voltage Disconnecting power supply during the up date process will lead to damage of electronic components Make sure that the unit is not disconnected from the power supply voltage during the update To accomplish the update download the USB Con nect software offered by KBL For detailed informa tion press the help button in the main menu Operating Instructions megaSun space 3000 7 megaSun Standards This tanning system complies with the following standards in their respectively applicable version e EN 60335 2 27 e EMV 2004 108 EC Low Voltage Directive 2006 95 EC Ce FRONT SIDE OF THE TOWER DOOR OPENED gepr fte Sicherheit 1 Door EA Top crown Fer Facing of unit lighting at top crown 2 Grab handle left hand side EI Display 6 Rear wall ET Lateral part right hand side Ey Floor plate 82 Lateral part left hand side Ei Door handle 8 Operating Instructions megaSun space 3000 FRONT AND TOP PART OF THE TOWER DOOR CLOSED br Overhead ventilation opening Ea Fan casing wi Exhaust opening SIDE VIEW DOOR OPENED E Door handle inside Ei Top crown Ex Fan casing EN Rear wall Ea Supply con
27. ennnnenennenennenennenn 23 Set decorative lighting u 44us04040e nennen 34 Maintenance and cleaning 200a20a200n20n 35 Instructions for cleaning and care 35 Maintenance intervals cccccceccceeecseeeeeeeseeesaeees 35 Cleaning and replacing the acrylic panes 36 Cleaning and replacing the tubes 37 Replacing the unit lighting cccceeseeeeseeeeneeeees 38 Recording to an SD Calrd ccecccccseeeeeseseeeneeeeeeees 39 Replacing Aroma and aquaCool media 40 Replacing the aquaCool nozzles 41 System messages 42 Technical Data 44 About these instructions This operating manual is intended for use by e operating staff e users e service staff Any person dealing with this tanning unit must have read and understood these instructions This manual describes units equipped with the maximum number of features Keep this manual ready to hand at all times Transport by forklift truck The device is mounted on a pallet e Insert the forks carefully into the openings of the pallet e Lift the load by a few centimetres e Transport the load carefully to the place of installation Overturning load Danger of being crushed by heavy parts of the equipment e Wear safety shoes Other modes of transport If a forklift truck cannot be used for transport the box must be unpa
28. ess enker I EXT DOWN _ Show the characteristics of the device Configuration code Variant code Serial number s Tb SERWICE SOLARIUM CODE gt T ET DOWN Branches to further configuration options These settings must only be made by trained service personnel megaSun 7 STORE I O3 Up CT SERVICE 18 18 Rebook gt Reboot press fo P EXIT DOWN L K Performs a restart of the electronics Attention All unsaved changes will be discarded STORE Tp EUEHTLOG ALAL o o T E DOWN Lists the latest 99 events error codes amp info messages Detailed information is available by pressing the Start button Example no time date code tanning time 001 16 44 05 01 09 0011 03 23 002 15 22 05 01 09 0002 07 22 003 10 07 22 12 08 004 17 16 005 099 Operating Instructions megaSun space 3000 33 megaSun 34 Set decorative lighting For remote control of the fourSeason color mode you may use our colorMotion controller Available only for devices with LED technology To control the fourSeason color mode of the device use the stylish colorMotion controller with its elegant colorWheel and its full touch panel Change brightness turn on and off the lighting select static colors or select one of the automatic color change programs This wireless control technology allowes remote control from various directions with just a finger touch Oper
29. ive UV irradiance in the range of 250 400nm in mW m Reflector types O For lamps without reflector B For lamps with reflector angles wider than gt 230 N For lamps with reflector angles narrower than lt 200 R For lamps with usual reflector angles of gt 200 a lt 230 Indication of Watts electrical power Operating Instructions megaSun space 3000 45 megaSun 46 Operating Instructions megaSun space 3000 KBL AG RingstraBe 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 E Mail megaSun kbl de www kbl de
30. lows for the change over between pulse code and BCD code mode with the Studio signal pending and deactivates the external channel selection Factory setting bcd 23 STORE UP AuUbTo ia Humber of studio channels P EXT DOWN If bcd has been preselected the number of channels available in the studio is specified here Factory setting 4 I EXT DOWN _ If this function is active music is played nonstop i e also out of tanning sessions Factory setting off megaSun STORE TP AUDIO Honskop music source T ET DOWN Allows for choosing the permanent audio source for the Music nonstop function Factory setting MP3 internal AUDIO 11222 Default volume tanning o O Ext T DOWN _ Sets the volume for the tanning mode Factory setting 6 STORE I UP AUDIO Ieras Default volume standby P EXT DOWN Sets the volume for the standby mode Factory setting 3 STORE Op CSC AUDIO 13722 Maximum adjustable volume PT Ext 1 DOWN _ Presetting the maximum adjustable sound level limits the maximum adjustable sound level in the operating and standby mode Factory setting 9 P EXT DOWN _ Here you can adapt the volume of megaVoice Factory setting 00 dB Operating Instructions megaSun space 3000 27 megaSun 28 AuUobTo Dynamic volume adapkion I 1 EXT d DOWN Dynamic volume adaption on off Fa
31. lter of the unit lighting must be replaced whenever the tube is replaced Dismantle the acrylic panes as it is described in the section Cleaning and replacing the acrylic panes Dismantle the tubes by turning each tube a quarter turn towards the front or towards the back and then pulling it out megaSun To clean the tubes use warm water and a chamois Do not use any aggressive detergents or agents con taining alcohol When installing new tubes replace the starters first Installing the tubes Make sure that the inscription on the tubes is visible for otherwise there will be no tanning effect The assembly is carried out in reverse order Reset the operating hours counter in the service menu Operating Instructions megaSun space 3000 37 megaSun 38 Replacing the unit lighting If the device is lighted by means of high perfor mance LED s Four Seasons these can only be re placed by a qualified specialist if they are defective In this case contact the service department If the device is lighted by means of fluorescent lights proceed as follows Tubes are located in the door and in the side parts to illuminate the device The color filter must be changed along with the tubes at the latest DOOR Loosen the door facing at one corner and slowly pull it forward with the aid of a suction cup Loosen the two screws of the door panel and lift the panel carefully out of the side guides
32. ly use radiation appliances of UV type 4 after consulting a doctor FOR EACH TANNING SESSION e Always wear the supplied protective goggles Contact lenses or sunglasses are no substitute for the protective goggles e Remove cosmetics before tanning and do not use any sunscreen or products that accelerate tan ning e Allow for at least 48 hours to pass between sessions e After a tanning session in a studio do not take another sunbath out of doors on the same day e Protect sensitive areas such as scars tattoos and genitalia from radiation Operating Instructions megaSun space 3000 13 megaSun 14 Tanning times Please refer to the following tables for learning the individually applicable tanning times that depend on the skin type For the precise definition of the skin types please refer to the supplied skin type table If the tanning ses sion sequence is interrupted for 4 weeks or more you will have to start with the first session again The interval between two tanning sessions must be at least 48 hours The times mentioned in the tanning schedules only apply on the condition that tubes are replaced according to the maintenance intervals stipulated in the section dealing with maintenance EU TANNING SCHEDULE according to UV Type Ill and 0 3W m in compliance with EN 60335 2 27 Skin type Oo EHEN EHEN EHE 6 min 6 min 6 min 6 min 7 min 8 min 10 min 11 min 9 min 10 min 14 min 17 min 10 min 12 min 19 min 22
33. m the standby mode you can change over to the tanning mode or to the service mode Operating Instructions megaSun space 3000 TANNING MODE The tubes and the tanning lamps are switched on and a tanning session is in progress While the unit is in tanning mode the settings for the ongoing tanning session can be changed via the control panel SERVICE MODE In the service mode the device is configured for the tanning mode Various values can be displayed and test functions can be carried out FAN RUN ON After the tanning session the fan runs on for 3 minutes in order to cool down the device The fan power is automatically decreased as the tubes cool down As a rule an averagely tanning skin has achieved a uniform tan after three to five tanning sessions These sessions should take place every second day To preserve the suntan achieved one or two tanning sessions per week are normally sufficient Instructions for the user Observe the following tanning instructions NO SUNSCREEN WITH PROTECTION FACTOR Sunscreens with sun protection factors are unsuitable for use in a tanning salon For tanning the skin should have been thoroughly cleaned and be dry For optimum skin care we recommend using our body care products after tanning GENERAL e Any person that complies with the requirements laid down in the chapter Intended use may use the device e Never exceed your personal minimum erythema dose MED Follow the
34. ment studio MUusic 2 0024200 10 External PIAayerS cccccccseecsececeeeceeseeeceeeeseeesaeees 11 aquaCool box CONNECTIONS scceeeeeeeeteeeeeeeeees 11 Connections aquaCool box tower cceceeeeeeee 11 Start Up orii iaaa 12 Operating MOESG cccccscccseseecsesseeseeseessaeeessenees 12 Tanning instructions 2002u0 000au00anunnunnnnnannnnn 13 Instructions for the user ccceccceeeceseceeeeseeeseeees 13 TANNING times uesuuensnensnnennnennnnnnnnnnnnnnnnnnnnannnnnen 14 Tanning mode icciecesiccacecievadesninccdesanteccnacvexpisansavenes 15 Starting the tanning SESSION ccccseseeeseeeeeneeees 15 Operation during the tanning session 15 Variable section of the control panel 16 BASIC TUNCTIONS rennen 16 FUNCTIONS OVEIVICW ccceecceeeeeseeceeeceeeseeeeseeesaeees 17 Standby mode service mode auunzunnunnnnnnunnn 19 Layout of the display NUMbEFS ccsceceeeeeeees 19 Switching the decorative lighting on and off 19 aquaCool spraying test cccecccsseeceeeeeseeeeseeeeeees 19 Invoking the service MENU cccsecceeeeeseeeeeeeeeees 19 Service menu BASICS uauuuuannenennnnennnnenennenennenn 20 Operating Instructions megaSun space 3000 Service MENU VerVieW neneasnnnennnnennnnennnnnnennenennenn 22 Personal PIN ecserin EAEn E 23 Service MENU OPTIONS ueaenenennen
35. min 12 min 14 min 23 min 28 min 13 min 16 min 27 min 33 min 15 min 19 min 32 min 39 min 16 min 21 min 36 min 44 min 18 min 23 min 40 min 50 min 11 min 14 min 19 min 25 min 44 min gt 55 min Operating Instructions megaSun space 3000 megaSun Operation during the tanning session Er re HOSE DE Dr FATAN You can control the functions of the device via Excessively prolonged tanning sessions the control panel during the tanning session It is may cause severe damage to skin and eyes particularly easy for you to access the basic functions Never operdte Ine Solanum Witt a Gelectve Buttons with recesses that can easily be sensed o the tanning times given in the allow for easy operation of the system even with your tanning schedule eyes closed The following explanations and functions refer to a NOTES tanning system that is fully equipped with all features 20 seconds after your last input the display changes over to the indication of the tanning time Starting the tanning session During the tanning session the door must remain closed in order to ensure that the ventilation works properly e Close the door and place yourself in the middle of the tower booth in such a way that the distance f between your body and the surrounding lamps is about equal at any point e Put on protective goggles e The tanning session will commence automatical ly after the warm up time controlled by the timer has elapsed During the warm
36. must not be formatted the Voice directory and its contents must not be changed or deleted RECORDING TO THE SD CARD Attention S Do not modify any files other than those included in the POP directory Insert the card into the computer and wait for it to be recognised e Copy files to the Pop directory or delete files from it Operating Instructions megaSun space 3000 39 megaSun Replacing Aroma and aquaCool e Replace the canister Start aquaCool initialization Service menu media Attention Do not use any agents other than aquaCool REPLACING THE AROMA TIN dA lied by KBL A aeg When the Aroma tin is empty a corresponding Risk of infections message is displayed Function of nozzles impaired Undo the cover of the aquaCool box and take it off REPLACING THE AQUACOOL CANISTER Due to the system a residual amount remains in the canister lf the aquaCool canister is empty corresponding e Unlock the retaining bracket Replace the tin l Reset the Aroma counter in the service menu to 0 messages are displayed and aquaCool switches off ae Reset Then the message on the display will dis shortly afterwards appear e Unscrew the lid Keep the hose end including the lid in a clean plas tic bag while replacing the canister 40 Operating Instructions megaSun space 3000 megaSun e Hinge the cover and screw down the aquabox again Replacing the aquaCool
37. nections Overview supply connections ee rl j 1 Fu E Fi k x i Le E P a r ge f L KA Mains voltage aquaCool box Fe Audio connection channel selection ea aquaCool air blue Aroma 33 aquaCool liquid 6 Connection of external timer coin box system Dr Power supply 8 Data cable Tower aquaCool Box Connecting the mains voltage Live components Risk of fatal injury due to electric shock when touching live parts Switch off mains voltage Protect against re connection Both the power supply and the related connection work must comply with national standards e g those set up by VDE in Germany The connection work must only be performed by qualified expert staff The connection to the 400 V mains must be protected by fuses Their specifications are listed in the chapter Technical data megaSun A residual current operated circuit breaker RCD with short time delay is absolutely required KBL AG recommends the following type KBL 3200 0770 00 type Typ ABB F 204 A 40 0 03 AP R Should the operation of the tanning unit cause any interference in the power supply network e g with ripple control systems TRA consult your power supply company to have corresponding blocking el ements audio frequency suppressors installed mains connection mains connection 400V 3N 50Hz coupling box with fuses se
38. nozzles After 1000 hours of operation the aquaCool nozzles have to be replaced in order to ensure that aquaCool stays fully operative and efficient The installation in structions will be enclosed in your spare parts con signment Operating Instructions megaSun space 3000 41 megaSun 42 Excess temperature bimetal Bimetal switch triggers Enabling signal from coin box system comes in longer than the time value Check the air intake air discharge system Let the device cool down 02 Maximum tanning time 3 _ Disconnect from the coin box system approved under Maximum tanning time voltage remains connected Excess temperature exhaust ae Make sure the fan runs freely Check the air intake air 03 Bimetal switch in the fan triggers fan discharge system Let the device cool down 12 zT Mainboard defective Contact your Customer Service put Controller 13 Maximum write cycle flash Maximum write cycle flash memory Contact your Customer Service memory reached reached O SD card read error Update via SD card failed CRC fault SD card check replace CRC fault p nz 19 n O ue urs SD Update via SD card failed access error SD card check replace fo SE e Parameter storage not found please con Check connector parameter storage If necessary re 17 found please connect and nect and restart place parameter storage restart 18 Sen Storage ozelg Parameter storage no valid serial number Contact your Customer Ser
39. ns megaSun space 3000 35 megaSun Cleaning and replacing the acrylic panes The acrylic panes can exhibit small inclusions and reams During operation hairline cracks can also develop This does not affect or hardly affects the tanning properties and does not represent a quality flaw The panes are cleaned whenever necessary When cleaning the inside it is recommended to take the occasion and clean the tubes too The instructions for cleaning and care must be observed The outer surface can be cleaned without any preparatory works The panes are dismantled as follows Push the pane centrically towards the tubes e g with your elbow and pull the upper right hand cor ner of the pane out with the help of the suction cup To install the pane insert its entire left hand side and press it against the aluminium section Take hold of the pane from behind and release the l l Eaa Bend the pane and push it over the right hand edge right hand side in a downward movement The pane nu l l of the aluminium section Due to the pane being can then be removed l Ea T bent it rests in its position 36 Operating Instructions megaSun space 3000 Cleaning and replacing the tubes By regularly cleaning the tubes see Cleaning and care instructions you can help preserve their tanning power When replacing the tubes you must also replace the starters Replace tubes and starters only against ones of the same type The colour fi
40. ructions megaSun space 3000 SERVICE MENU BASIC OPERATION The service menu is divided into the main menu and subordinate groups of functions If you choose a menu item e g AUDIO you will get access to all functions related to this item Q MAIN MEN at function group from the Select the desired 1 EHLIROHMENT 2 HOUR METERS 3 PRESELECT main menu by pressing AQUA the 4 UP or the 9 i ae CONLITIONING DOWN button The 18 UU LEUEL currently selected group 13 EVENTLOG ee iad IS highlighted e Press the START ENTER button to access the desired group menu EXIT DOWN The currently active function circle is displayed in the centre line on the left hand side You can invoke further functions of this group by pressing 4 UP or 9 DOWN Group Function group number AUDIO APS inkernal Function Settings CHANGE SETTINGS Depending on the respective function you can change values select options and switch functions on or off To do so use the buttons 2 and 7 Q Example af f Changing a value EHUITER HNMENT BES FA Ss rm m Farmina Firm i E mi EF GGG Go oot GE See EGG m P EXT DOWN Imin amp Example VA Selecting an option German STORE 3 UDO ENUIROHMEHMT Language gt English Q Example 24 Switching a function on off megaSun STORE amp EXIT Save your settings
41. tegories mentioned below otherwise using the tanning equipment is prohibited for him or her The following individuals must not use the tanning system e Persons under 18 years of age e Persons with heart pacemakers e Persons who are suffering or have suffered from skin cancer or have a predisposition toward this or those whose first degree relatives are suffering or have suffered from malignant melanoma black skin cancer e Persons taking photosensitive medications e Persons who are being treated by a physician for conditions associated with photosensitivity e Persons suffering from acute sunburn e Persons who are prone to freckles e Persons with atypical discoloured skin areas or and with more than five atypical moles with a di ameter of 5 millimetres or more and persons with more than 16 moles with a diameter greater than or equal to 2 millimetres If in doubt consult a phy sician e Persons who had several severe sunburns as chil dren e Persons with naturally red skin colour e Persons who do not tan at all or cannot tan with Operating Instructions megaSun space 3000 out getting sunburn e Persons who have a predisposition toward sun burn Furthermore this tanning unit has been designed for use by individuals who are in full command of their physical sensorial and mental faculties Moreover sufficient Knowledge and experience are required During the operation no other persons shell
42. uaCool or Aroma plus button a spray cycle can be triggered Factory setting manuel agua er a bes JEEN zle squsalo Skart press for Zs I T EXT T DOWN Starts the aquaCool test 1 cycle aqusloolendurance kesk Se Starts the aquaCool endurance test After having selected and stored the on setting you must leave the service menu and start a tanning session Attention aquaCool will continue to spray permanently during a whole tanning session Factory setting off De g aquala ER Se a gt Skarkipress for Zs PP Ext 1 DOWN _ Starts the aquaCool initialization process A spraying cycle of 90 seconds is started to bleed the system before commissioning after a repair operation or after a canister replacement megaSun I 1 EXT DOWN _ Activates and deactivates the aroma function Factory setting off C STORE Up a AROMA 32r a7 Aromastaktus resek press for 2s L aonn EXT 7 DOWN 2 sec reset Reset gt after having exchanged the Aroma tin TSTORE I UP a ARORA Asiar Cycle time I 1 ET DOWN Defines the aroma cycle time spraying time spraying interval Only active in systems without aquaCool or disabled aquaCool If manual is se lected by pressing the aquaCool or Aroma plus button a spray cycle can be triggered Factory setting manuel STORE I O3 UDO AROMA Aroma cabin aukomatkic T ET DOWN Th
43. uch as MP3 players mobile phones cell phones I pods etc Operating Instructions megaSun space 3000 EXTERNAL 100 V AUDIO SIGNAL ON STUDIO CHANNEL OPTIONAL FEATURE lf you decide for a connection to a 100 V audio system you will need a transformer KBL no 9100 0170 00 for the transmission of the audio signal This connection must be made by trained service staff Connecting the channel selection The following diagrams show the wiring of the chan nel selection on the audio equipment s side for pulse coding as well as for BCD coding Wiring on the audio system of the studio puls coding rol voltage lection o f re Q Wiring on the audio system of the studio BCD coding O Control voltage CHANNEL BCD 0 BCD 1 1 0 0 2 1 0 3 0 1 4 1 1 Level adjustment studio music The voice audio system components are installed in the back part of the tower The potentiometer which serves to adjust the external audio signal level is accessible through a maintenance hatch on the left hand side of the tower To avoid overdrive select the level adjustment accordingly The level setting depends on the strength of the external signal and should be carried out by a service engineer External Players A line connection has been integrated into in the head area near the interior display so that the user can con nect his or her own player such as an MP3 player an iPod etc Useastandard 3 5mm jack cable
44. vice Instructions for cleaning and care GENERAL Before starting to clean the unit take off any rings bracelets watches etc that you might be wearing in order to avoid scratching the surfaces Cleaning fluid must not run into the appliance TUBES To preserve the tanning power we recommend Cleaning the tubes and UV lamps with warm water and a chamois after approx 200 hours of operation ACRYLIC PANES For cleaning the acrylic panes use the special cleansing agent and disinfectant megaClean sup plied by KBL and dilute it in water at a ratio of 1 13 megaSun VARNISHED AND PLASTIC PARTS To clean the varnished and plastic surfaces use a damp soapy cloth Do not clean the big plastic parts with a dry cloth This might scratch the surfaces Tocleanthe mirror plate of the floor proceed as follows Use a damp chamois and spray megaClean onto it sparingly Then wipe the surfaces clean NEVER CLEAN WITH A DRY CLOTH Prevent the corners and edges from getting wet CLEANING AGENTS The surfaces and the acrylic panes must not be cleaned with concentrated disinfectants or sol vents or other liquids that contain alcohol Maintenance intervals Component i Cleaning Replacement wearing part Tubes after approx 200 After 500 operating operating hours hours When necessary necessary When After approx 1000 Pod necessary operating hours When Whenever UV necessary tubes are replaced Operating Instructio
45. vice serial number CAN BUS Interior display 19 ee V1 is incompatible CAN BUS preSelection dis play V1 is incompatible CAN BUS operators incompatible Use CAN BUS operaters V2 CAN BUS audio module full 21 a V1 is incompatible CAN BUS RGB module V1 22 ee ist incompatible Parameter storage write er Check connector parameter storage If necessary re 23 Parameter storage write error ror place parameter storage 24 Parameter storage read error Parameter storage read error CIES CONIC IO EVENTS SHOE W messen IE place parameter storage 95 Frequency detection detec ee Restart the controller Contact your Customer Service tion failed q y l after the third unsuccessful restart Frequency detection power 7 26 supply connection faulty a e E VOU Check mainboard connector X6 E6 age connector X6 E6 Operating Instructions megaSun space 3000 megaSun by KBL The content of the aquaCool canister is suf low ficient for another 2 5 hours of operation with a spraying time of 6 seconds each Replace the empty aquaCool canister with a full one Do not replace aquaCool with any other liquid Check replace the patch cable Acknowledge the message by pressing START If the fault persists contact your Customer Service Communication between control and mod ule display has been interrupted Replace the aquaCool canister with a full one See chapter Refilling Aroma and aquacool Replace the Aroma tin See
46. y sunday the switching cycle will be the same for each day of the week VVeek Switching cycle B Monday B ON Sunday B OFF Day Switching cycles B Monday Tuesday Wednesday Thursday Friday Saturday Sunday Switching cycle A Switching cycle B 08 30 12 00 14 30 22 00 24 Operating Instructions megaSun space 3000 EMHWIROWMEHT aq Hg TIMER DEKOLICHT 4 ET STORE up gt press EHTER o O T DOWN Entering switching times for the decorative lighting The submenu is invoked by pressing START ENTER SELECT WEEK OR DAY OF THE WEEK STORE I R a EMHWIROQHMEHT TIMER gt ALES s press ENTER I 1 EXIT DAN gt ENTER SWITCHING TIME STORE I US EMHWUIROHMEHT TIMER A B14 ss ee Pd EX a N PO SIORE I up MTs 1EHT TIMER amp lsd EXIT DOWN Set the time Select input e Save settings by fields pressing STORE a STORE I up PIN ENVIRONMENT 1505 Mas mum kanning Eime o T T 1 DOWN _ Sets the maximum tanning time for all timers In the easyCare operating mode the setting has been fixed to 30 minutes Factory setting 44 minutes STORE I O3 UDO HOUR METERS B14 Operaking hours overall G BTESEH P ET DOWN _ Displays the total operating hours STORE I O3 UDO HOUR METERS be ad Operating hours UW cubes eae nee a D a EXT T DOWN LY
Download Pdf Manuals
Related Search