Mettler Toledo Multirange Application software IND690
Contents
1. greater than 999 999 NOT USED e Buffer contains no data gt Totalize items with key NO NOT FOUND No database entry exists for entered gt Enter existent article number article number VALUE TOO HIGH e Place number for manual entry of gt Enter maximum of 999 999 PCS pieces exceeded WRONG INPUT e Manual entry of pieces contains gt Enter quantity without decimal places decimal places WEIGHT TOO LOW e Minimum weight dropped below when gt Place weight gt minimum weight on totalizing or clearing scale LOAD SCALE e Minimum deflection dropped below gt Place weight on scale or move scale when totalizing or clearing NEGATIVE NET Negative weight values cannot be gt Relieve scale and retare totalized NEGATIVE SUM e Clearing would lead to a negative gt Place right item on scale subtotal or total sum BUFFER FULL e Max number of article numbers in gt Print total record and clear total sum buffer reached OVERFLOW PIECES e Manual entry of pieces leads to a sum gt Manual entry of pieces is greater than 999 999 automatically printed and deleted OVERFLOW TOTAL e Totalizing leads to a value greater than gt Total sum is automatically printed 999 999 999 kg or to more than and deleted 9 places e temcounter exceeds 999 999 gt liemcounter starts over at 1 SUM OVERFLOW e Totalizing leads to a value greater than gt Subtotal is automatically printed and 999 999 999 kg2. 2 1 Overview of the PAC master mode block In this block the following system settings can be carried out AUTO AUTO AUTO TOTALIZING TOTALIZING ON TOTALIZING OFF ENLARGED ENLARGED ENLARGED f SUM ON SUM OFF CLEAR EDIT PRINT DAVABASE DATABASE DATABASE DATABASE ITEMS ITEMS ACTIVE ITEMS PASSIVE REPORT REPORT REPORT Gade REPORT TARG TARG TARG VALUE TARG VALUE TARG VALUE OPERATOR GUIDEF VALUE A B VALUE A B C A B C4D A B C D4E A B C D E F MIN CONTROL DISPLAY STANDARD EXTENDED TOTAL REPORT TOTAL REPORT RESET PAC n p l 1 Legend Blocks on a grey background are described extensively in the following e Factory settings are printed in bold type Operating instructions 22012831B 08 08 13 Settings in the master mode IND690 Sum 2 2 Settings in the PAC master mode block AUTO TOTALIZING Switch automatic totalizing on or off Factory setting AUTO TOTALIZING OFF ENLARGED SUM Also divide up customer sum printout by article numbers Factory setting ENLARGED SUM OFF DATABASE Edit article data EDIT Edit database entries see page 16 DATABASE PRINT DATABASE Print a list of all database entries CLEAR DATABASE Clear only selected data when deleting a database entry in the total sum memory CLEAR TOTAL Clear only weight sums and item counters the article entry with the article number is retained factory setting CLEAR ALL Clear article nu
3. METIL Application software IND690 Sum nn e E E 5 g E g IN OOOO A O6 WWW mt com support ServiceXXL Tailored Services Congratulations on choosing the quality and precision of METTLER TOLEDO Proper use according to these instructions and regular calibration and maintenance by our factory trained service team ensure dependable and accurate operation protecting your investment Contact us about a ServiceXXL agreement tailored to your needs and budget We invite you to register your product at www mt com productregistration so we can contact you about enhancements updates and important notifications concerning your product IND690 Sum Contents Contents a l 0 o o do o o d o do do d0o 100nR0N COND 0 Operating instructions 22012831B 08 08 Page Totdlizing f uncllOns eruere ranura n rnnt 4 DOCUMONTOTION 2 25 c2scksarssceddhtesratacgeehcecad EA A 4 jeyteelU eoa 4 Entering identifications ssssssssss b Totalizing items with same article number ssse 6 Entering known weight values manually 7 Cancelling WalTi uicc cett eoe ie eb dee cad oce een edere aes 7 Ending totalizing and clearing customer sum sssssesse 8 Managing inventory 245 vetet oio Ce d a meer rd ev rd i 1 uad 8 Working with several weighing platforms erreen
4. 9 Recalling application specific information sssessssssssssee 9 Printing total TeCOrd uns cr Peer te eee ern 10 Recalling total record from computer sssssssee 11 Printing total record on external printer 12 Settings in the master mode eee 13 Overview of the PAC master mode block 13 Settings in the PAC master mode block 14 Application DIOCks 2 2 12 sscedevereccanoeazavessssacevatdesacaeunes 17 Whatta dO e 1 1o tto pi o nete eto oet 20 Technical datu cir vae irc ed Ra err i Res p ehrPor Pete IS 22 jo Ge MT 23 3 Totalizing functions IND690 Sum 1 Totalizing functions 1 1 1 2 Function keys Documentation The weighing terminal IND690 comes supplied with a CD containing all the documentation on the weighing system IND690 These operating instructions describe the operation and configuration of the application software IND690 Sum The basic information for working with the weighing terminal IND690 can be found in the operating instructions IND690 Base Introduction With the IND690 Sum you can form 3 different sums Article total marked with e Customer sum marked with Total sum per article marked with for all articles marked with The article total combines all items with the same article number Each article total can be added fo a customer sum The total sum is formed independently of the articl
5. T 0 67934 n e t O n ean ety Tn 210 6654544 Z ywon Fax 210 6654545 2hyavon marketing nefton gr ZULLSPOWON www nefton gr 22012831B Subject fo technical changes Mettler Toledo Albstadt GmbH 08 08 Printed in Germany 22012831B Mettler Toledo Albstadt GmbH D 72458 Albstadt Tel 49 7431 14 O Fax 49 7431 14 232 Internet http www mt com
6. memory in sequence In the process the data are transmitted in their maximum length in accordance with the data formats in the application blocks During the data transmission the keypad of the IND690 Sum is locked and the display shows DAILY LOG TO EDP Note After pressing the CLEAR key or when the total sum memory overflows the IND690 Sum waits approximately 2 seconds before it deletes the article total memory During this time the computer can request data transmission via the interface Operating instructions 22012831B 08 08 11 Totalizing functions IND690 Sum 1 13 Printing total record on external printer If REPORT EXTERNAL is set in the master mode the total record of the total sum can be printed out on an external form printer In the PRINT MODE the printout can be formatted see INTERFACE master mode block in the operating instructions for the IND690 weighing terminal Here article data can be called up as database fields Example of printout on a certified printer Total record Date 06 06 06 Time 09 05 47 Last deletion Date 06 06 01 Time 09 25 41 ARTICLE GROSS NET TARE ITEMS 1000 ARTO1 1000 kg 800 kg 200 kg 2 1100 ARTO2 1500 kg 1200 kg 300 kg 4 1200 ARTOS3 1000 kg 800 kg 200 kg 3 1300 ART04 2500 kg 2200 kg 300 kg 1 Total Gross 6000 kg Net 5000 kg Tare 1000 kg Items 10 Operating instructions 22012831B 08 08 IND690 Sum Settings in the master mode 2 Settings in the master mode
7. or to more than deleted 9 places e temcounter exceeds 999 999 gt ltemcounter starts over at 1 SUM OVERFLOW e Totalizing leads to a value greater than gt Total sum is automatically printed 999 999 999 kg or to more than and deleted 9 places e temcounter exceeds 999 999 gt ltemcounter starts over at 1 SERIAL NO OVERFLOW Serial number for individual printout is gt Serial number automatically starts over at 1 20 Operating instructions 22012831B 08 08 IND690 Sum What to do if Error Display Possible causes Remedy OFF LIMIT e When DeltaTrac is activated net value gt Conclude weigh in properly is not within set tolerances therefore cannot be totalized and cleared STOCK O e Current item cannot be subtracted as gt Restock ihe stock will be dropped below Operating instructions 22012831B 08 08 21 Technical data IND690 Sum 9 Technical data Totalizing functions Subtotal memory For gross net and tare e Capacity up to 999 999 999 kg or a maximum of 9 places including decimal point All sum memory For totalizing subtotals Capacity up to 999 999 999 kg or a maximum of 9 places including decimal point Total sum memory For exact article detection of all sub quantities within certain time period or for completion of a shipment e Capacity up to 999 999 999 kg or a maximum of 9 places including decimal point Artic
8. Text 20 fixed text total 337 Total sum gross Response A B Weight value _ Unit weight SGross 338 Total sum Response A B _ Weight value _ Unit net weight Net 339 Total sum Response A B _ Weight value _ Unit tare weight Tare 340 Total sum Response A B Weight value _ Unit manual weight entries Hand weight 34 Total sum Response A B _ Number_10 _ Unit Unit PCS manual quantity entries SHand pieces 342 Total sum Response A B _ Number_6 item counter Sltems 343 Last closed article Response A B Date Time Date time name of Name of destination Text 20 destination identifica __ Identification of destination Text 20 tion of destination _ Name of article Text 20 name of article iden ldentification of article Text 20 tification of article 344 Last closed article Response A B Weight value _ Unit Gross weight 345 Last closed article Response A B _ Weight value _ Unit Net weight 346 Last closed article Response A B _ Weight value _ Unit Tare weight 347 Last closed article Response A B Number_10 Unit Manual entry of pieces 348 Last closed article Response A B Number 6 Item counter Operating instructions 22012831B 08 08 What to do if IND690 Sum 4 Whatto doif Error Display Possible causes Remedy ENTER NUMBER No numerical entry for Code A Enter article number
9. Working with several weighing platforms When working with several weighing platforms the weighing platform on which the individual items are weighed can be selected as desired Prior to taring the weighing platform or placing the item on the scale select the number of the weighing platform see Basic functions chapter in the operating instructions for the IND690 Base weighing terminal The number of the weighing platform is indicated on the printouts of the article total and the customer sum Note The weighing sums of all weighing platforms are rounded off with the roughest increments according to the weighing platform Recalling application specific information Information on totalizing can be recalled with the following key combinations INFO PLUS Display setting of AUTO TOTALIZING master mode block INFO A TOT Display current net value of the article total INFO C SUM Display current net value of the customer sum INFO TOTAL Display current net value of the total sum INFO MAN Display last manually entered weight value INFO CANC Display last cleared weight value Note If several pieces of information are recalled with one key the display changes automatically after the set DISPLAY DURATION It is also possible to switch back and forth between these pieces of information with the CLEAR key Operating instructions 22012831B 08 08 9 Totalizing functions IND690 Sum Total record Date Time Last deletion Da
10. _ Weight value _ Unit weight Gross 313 Article total net Response A B Weight value _ Unit weight Net 314 Article total tare Response A B Weight value Unit weight Tare 315 Article total Response A B _ Number_10 _ Unit Unit PCS manual quantity eentries Hand 316 Article total item Response A B _ Number 6 counter ltems 317 Item counter for Response A B _ Number 6 inventory control 318_001 Identification data Response A B Name text_20 __ __ Identification text_20 a Code A Code F Write A W 3 x x Name text 20 identification text_20 318 006 Comment xx 18 001 18 006 corresponds to the application blocks 094 099 Operating instructions 22012831B 08 08 Application blocks IND690 Sum No Content Format 318 Identification data Response equal to 318 001 Uu Code A Code D Write equal to 318 001 321 Comment xx 18 21 corresponds to the application blocks 094_001 094_004 322 Total record Response A B _ Text_20_ fixed text total record 323 Print customer sum Response A B _ Text_20 fixed text customer sum 324 Customer sum Response A B _ Weight value _ Unit gross weight Gross 325 Customer sum Response A B Weight value _ Un
11. ady present in the article database it is sufficient when all characters numbers and separating characters are entered up to the first letter Example The existing article number 1004 Screw can be called up with 1004 with blank space To handle article numbers see DATABASE master mode block on page 14 Operating instructions 22012831B 08 08 5 Totalizing functions IND690 Sum 1 4 12345678 12 495 kg Article no Gross Net 11 000 kg Tare 1 495 kg Current no 6 12345678 12 495 kg Article no 11 000 kg 1 495 kg Current no 6 Article total Article no Gross 12345678 12 495 kg Net 11 000 kg Tare 1 495 kg Items 6 Totalizing items with same article number Totalizing manually If AUTO TOTALIZING OFF is set in the master mode the weight values of the items must be copied with the PLUS key 1 Press PLUS key and enter identifications see section 1 3 2 Lay item on weighing platform 3 Press PLUS key The display shows the article number the serial number and the net value NET of the article total The current article total is automatically printed out 4 Relieve weighing platform 5 To totalize additional items repeat steps 2 to 4 Totalizing automatically If AUTO TOTALIZING ON is set in the master mode the weight values of the items are automatically totalized If the items are in tare containers of an equal weight the weighing platform can be tared with one
12. as desired see operating instructions and installation information for printer GA46 The entries of the customer sum are available in the application blocks 323 328 see section 3 Managing inventory The default setting for the IND690 Sum is the PLUS MODE in which it adds together all items with the same article number and the item counter increases If inventory control is to be carried out with the IND690 Sum it is possible to switch back and forth between the PLUS MODE and the MINUS MODE to detect inventory receipts and removals Weight values adopted in the MINUS MODE are subtracted from the sum and the item counter is reduced Prerequisite ITEMS ACTIVE is set in the master mode 1 To switch over to the MINUS MODE press and hold the PLUS key until MINUS MODE appears in the display 2 Totalize the inventory removals see section 1 4 IND690 Sum operates in the MINUS MODE until it is switched over to the PLUS MODE again Operating instructions 22012831B 08 08 IND690 Sum Totalizing functions Inventory receipts 1 9 1 10 1 To switch over to the PLUS MODE press and hold the PLUS key until PLUS MODE appears in the display 2 Totalizing the inventory receipts see section 1 4 IND690 Sum operates in the PLUS MODE until it is switched over to the MINUS MODE again Note If the inventory level is dropped below the display shows INVENTORY O and the weight value of the current ifem is not subtracted
13. dopt the article number press the ENTER key Enter a new article number and confirm with ENTER The total record for this database entry is automatically printed and the display shows TOTAL RECORD and then SAVE 3 To save the database entry press the ENTER key To delete the database entry press the CLEAR key Note If the entered article number is not present in the total sum memory the display shows NO NOT FOUND Operating instructions 22012831B 08 08 IND690 Sum Totalizing functions 1 11 2 Printing all database entries 1 Press the TOTAL ENTER key sequence The total record is automatically printed and the display briefly shows TOTAL RECORD and then SAVE 2 To save all database entries press the ENTER key To delete all database entries press the CLEAR key Recalling total record from computer If the interface is set to DIALOG MODE in the INTERFACE master mode block the total record of the total sum can be recalled from the computer The following interface commands are available for this purpose e Print total record for all list entries and then save A W 3 0 6 0 5 corresponds to the TOTAL ENTER key sequence e Print total record for all list entries and then delete AjW 3 0 6 1 5 corresponds to the TOTAL CLEAR key sequence In accordance with the printout of the total sum the database entries and the customer sums are listed in the total sum
14. e MIN CONTROL the display shows INSUFFICIENT WEIGHT Possible values 1 99 digit factory setting 10 DISPLAY Select display presentation STANDARD Article number can only be displayed with 14 characters EXTENDED If entered the article number is displayed immediately after entry in a larger font on the middle line Up to 20 characters can be displayed TOTAL REPORT Switch the total report on off If a total is not required the total report can be deactivated If the total report is deactivated no total sum is added up and the TOTAL key is not displayed The error message EL is displayed at the AW 306 interface command Factory setting TOTAL REPORT ON Operating instructions 22012831B 08 08 15 Settings in the master mode IND690 Sum RESET PAC Reset all functions to the factory settings Block Factory setting AUTO TOTALIZING off ENLARGED SUM off CLEAR DATABASE clear total LIST clear sums ITEMS active REPORT report GA46 OPERATOR GUIDE enter A B MIN CONTROL 10 digit TOTAL REPORT on Editing database entries Function keys The function keys in the block EDIT DATABASE are assigned as follows for editing database entries lt gt F gt NEW T Display Display next Selectfunction SEARCH Accept previous database offunction key EDIT changes and database entry F5 DEL return to entry NEW higher level SEARCH EDIT block The database entry can b
15. e edited with function key F5 NEW Create new database entry Here the first character of the article number Code A must be a number as otherwise the message ENTER NUMBER appears SEARCH Search for an existing database entry EDIT Edit an existing database entry CLEAR Clear displayed database entry 16 Operating instructions 22012831B 08 08 IND690 Sum Application blocks 3 Application blocks In the following description the application blocks are shown in the syntax for the MMR command set When used with the SICS command set please observe the SICS conventions see Operating instructions for IND690 Base weighing terminal No Content Format 301 Pac version Response A B IND690 Sum Vx xx 302 Program number Response A B IP66 0 0xxx 305 Keypad entry or read Response A B _ Entry in barcode Write A W 3 0 5 Entry Comment Entry Text 20 number or weight value 306 Total record Write Print and save total record A W 3 0 6 0 5 TOTAL ENTER key sequence Print and delete total record A W 3 0 6 1 5 TOTAL CLEAR key sequence 310 Consecutive number Response A B Number 4 311 Print article total Response A B Text 20 fixed text article total 312 Article total gross Response A B
16. e total and customer sum It stores all items that have been totalized with the IND690 Sum in a database Both the sums in the database fields of each individual article and the individual sums for all identical database fields are stored Similar to application blocks these database fields can be added to the printout configuration see operating instructions for the IND690 Base weighing terminal A pre configured total record of the total sum lists all items by article numbers The function keys of the IND690 Sum are assigned as follows PLUS A TOT C SUM TOTAL MAN CANC Start automatic Print article total set Print customer sum Print sum report of Enter weight values Cancel items and totalizing or article total buffer to set customer sum total sum or quantities print cancelled totalize items zero transmit article buffer to zero save or delete list manually values manually total to customer entries sum buffer gt Select the function by pressing the function key Example gt Press the MAN key Then you can enter a weight value manually with the keypad When the function keys are otherwise allocated gt Press the cursor keys lt or gt repeatedly until the function key assignment shown above appears 4 Operating instructions 22012831B 08 08 IND690 Sum Totalizing functions 1 3 Date 01 12 97 Time 11 40 56 Ident D 1236 Ident C 7896 Destination Clie
17. gatively booked in the article total and customer sum memory The cancelled values are automatically printed Operating instructions 22012831B 08 08 7 Totalizing functions IND690 Sum 6985 39 540 kg 32 070 kg 5 470 kg 2 000 kg 0 pcs 3 Article no Gross 7412 65 905 kg 53 455 kg 12 450 kg 0 000 kg 0 pcs Items 5 Customer sum Gross 107 445 kg Net 85 525 kg Tare 21 920 kg Hand 2 000 kg Hand 0 pcs Items 8 Article no Gross Net 1 8 X Xo X X X KK X X Xo X X X X Inventory removals Notes e f a negative weight value is formed in the article total or customer sum memory during cancelling the item is not cancelled and the display shows NEGATIVE SUM e The serial number of the item is increased by 1 during cancelling and the item counter in the article total or customer sum memory is decreased by 1 e The printout can be formatted as desired see operating instructions and installation information for printer GA46 Ending totalizing and clearing customer sum After completing a shipment or an order the customer sum can be printed If new identifications are then entered a new totalizing process is started automatically 1 Press C SUM key The customer sum is printed and the customer sum buffer set to zero 2 Enter identifications see section 1 3 Notes Article data are only listed individually when ENLARGED SUM ON is set in the master mode e The printout can be formatted
18. it net weight Nef 326 Customer sum Response A B Weight value Unit tare weight Tare 327 Customer sum Response A B Number 10 Unit Unit PCS manual quantity entries Hand 328 Customer sum item Response A B Number 4 counter Items 329 Total record Response A B Text 20 Date Time date time at last Write AW 0 1 9 Text 20 S Date Time deletion Comment Text e g last deletion Date DD MM YY MM DD YY Time hh mm ss A PMhh mm ss 330 Total record Response A B Text 20 fixed text for cancelled Write A W 3 1 1 Text 20 items Comment e g cancel 391 Total sum cancelled Response A B Weight value _ Unit items gross weight Gross 332 Total sum cancelled Response A B Weight value _ Unit items net weight Nef 333 Total sum cancelled Response A B _ Weight value _ Unit items tare weight Tare 18 Operating instructions 22012831B 08 08 IND690 Sum Application blocks No Content Format 335 Total sum manual Response A B Text 20 Weight value _ Unit entry Write A W 3 3 5 _ Text 20 Weight value __ Unit fixed text for printing and weight value 336 Total record Response A B
19. le management Maximum of 999 article numbers Serial No On every sub quantity printout capacity up to 999 999 Item counter On every sum printout capacity up to 999 999 Input routine Automatic input request for destination data and article numbers for exact article sum detection Clear function Reverse entry of incorrectly totalized sub quantities fom sum memories Manual input Manual input of known weight values net in sum memories or piece inputs for logging on output Automatic totalizing Automatic totalizing and printing after placing weighing sample on scale and stabilization of weighing platform 22 Operating instructions 22012831B 08 08 IND690 Sum Index 6 Index A Article total 4 Automatic totalizing 14 C Cancel item 7 Carry out inventory control 8 D Database 14 Database entry 10 14 E Edit data string 16 Enlarged sum 14 Enter identifications 5 Enter known weight values manually 7 Error messages 20 F Function keys 4 M Minimum load control 15 0 Operator guide 15 P Print total record 12 14 R Recall information 9 Recall total record from computer 11 Reset Pac 16 T Technical data 22 Total record 10 Total sum 4 8 Totalize automatically 6 Totalizing 6 8 Totalizing functions 4 22 Transmit article total 6 Ww What to do if 20 Work with several weighing platforms 9 Operating instructions 22012831B 08 08 23 Nevtwv Texvohoyies ABEE l paka 113
20. mber all other identification data weight sums and item counters ITEMS Switch item counter for inventory control on or off ITEMS ACTIVE For inventory receipts the item counter is increased with the PLUS key for inventory removals it is decreased factory setting ITEMS PASSIVE Switch off item counter the display shows the article total and a serial number Comment The item counter is available in application block 317 see section 3 REPORT Select printer for total record of total sum REPORT GA46 Print total record on printer GA46 the printout cannot be formatted factory setting REPORT EXTERNAL Print total record on a form printer the printout can be formatted as desired 14 Operating instructions 22012831B 08 08 IND690 Sum Settings in the master mode OPERATOR GUIDE Interrogation of the identification data memory prior to totalizing TARG VALUE A B Code B and Code A are always requested factory setting TARG VALUE A B C Code C Code B and Code A are always requested TARG VALUE A B C D Code D Code C Code B and Code A are always requested TARG VALUE Code E Code D Code C Code B and Code A are always requested A B C D E TARG VALUE Code F Code E Code D Code C Code B and Code A are always requested A B C D E F MIN CONTROL Set minimum load control If the current weight value is less than the value of th
21. nt 1234 o Xx Entering identifications To mark the items identifications must be entered prior to totalizing e g the article number see Additional functions chapter in the operating instructions for the IND690 Base weighing terminal Depending on the setting of the OPERATOR GUIDE in the master mode the IND690 Sum requests Code F to Code A in sequence The identification data buffers have the following standard assignment Code A ARTICLE NO e Code B DESTINATION Code C IDENT C Code D IDENT D e Code E CUSTOMER Code F OPERATOR If the name of the identification data buffers is to be changed in the master mode make sure that the sum memories list all weighings by the article number or by the identification Code A When entering the identifications no fixed text memories can be recalled with the IND690 Sum Input gt Enter identifications and confirm each with ENTER After entering Code B the header is automatically printed Totalizing is started after entering Code A Notes e The values marked with only appear when the master mode block OPERATOR GUIDE is set to TARG VALUE A B C D E F e The first character of the article number Code A must be a number as otherwise ihe message ENTER NUMBER appears All other identifications can be confirmed without entry with ENTER e The input of Code A or Code B can be cancelled by pressing the keys CODE A or CODE B again For article numbers alre
22. of these containers prior to totalizing The stored tare weight is then taken into account for all subsequent weighings 1 Press PLUS key and enter identifications see section 1 3 2 Lay item on weighing platform The display shows the article number the serial number and the net value NET of the article total The current article total is automatically printed out 3 Relieve weighing platform 4 To totalize additional items repeat steps 2 and 3 Note The PLUS key need only be pressed after the 1st item to start automatic totalizing Transmitting current article total gt Press A TOT key The current article total is transmitted to the customer sum buffer and printed out Then the article total buffer is set to zero The display shows the last article number Continuing totalizing gt Copy displayed article number with ENTER Enter new article number and confirm with ENTER Cancelling totalizing gt Cancel entry of article number with the CODE A key Operating instructions 22012831B 08 08 IND690 Sum Totalizing functions Notes e f the article total or the customer sum memory overflows the sum saved last is automatically printed and then deleted before copying the current item to the memory The display shows SUM OVERFLOW or SUM OVERFLOW e The printout can be formatted as desired see operating instructions for IND690 Base weighing terminal 1 5 Entering known weight values manually Known net weight val
23. te Time Article no Gross Net Tare Hand Items 01 12 97 11 40 56 30 11 97 13 40 35 123 62 625 kg 52 600 kg 10 025 kg 0 pcs 5 78788 62 625 kg 52 600 kg 10 025 kg 0 pcs 5 96587456 50 100 kg 42 080 kg 8 020 kg 1000 pcs 4 288 075 kg 241 960 kg 46 115 kg 5 000 kg 23 1 11 1 Printing total record For complete detection of all items a total record should be printed at regular intervals e g after one day one week or after completing an entire shipment A database entry is created for each article number in the customer sum memory A database entry consists of the following values Article number Gross weight of all items Gross Net weight of all items Nef Tare weight of all items Tare Quantities of the manual entries Hand Item counter Items When the total record is printed out you can select whether you print the total record for an individual database entry or for all database entries The total record lists the database entries and the corresponding total values in the total sum memory The total record can be formatted The article data can be called up as database fields Following printing you can store or clear the database entries The setting of the DATABASE master mode block determines which data are cleared Printing individual database entry 1 Press the TOTAL CODE A key sequence The display shows the article number last entered 2 To a
24. ues can be copied without weighing or quantities entered Manual entries in a running weighing series are stored under the current article number However the manual entries can also be stored under a separate article number 1 With separate article number Press A TOT key and enter article number for manual entry 2 Press MAN key 3 Weight value Enter known net weight value and confirm with ENTER Article no 12345 Qor Hand 25 30 kg l Current no 5 Pieces Press the cursor keys lt or gt and enter the number of pieces in the unit PCS Article no 12345 4 The display shows the net value of the current article total Hand 1000 pcs The manual entry is automatically printed and the display shows the net weight eons value of the article total Notes The weight unit for entering known weight values can be selected with the cursor keys lt or gt e Weight values can only be entered in the displayed unit e The printout can be formatted as desired operating instructions for IND690 Base weighing terminal 1 6 Cancelling item Cancel Article no Gross Net 11 000 kg Tare 1 495 kg Current no 6 12345678 12 495 kg An item of the current article total can be cancelled by weighing back Manually entered weight values cannot be cancelled gt Leave the item to be cancelled on the weighing platform or place it on the platform again and press the CANC key Net gross and tare weight values of the current item are ne
Download Pdf Manuals
Related Search