USER MANUAL - Hispania Solar
Contents
1. 5 MM2 The converter can also be used as a voltage doubler from 12V DC to 24V DC but without galvanic isolation between the input and output The output is connected in series with the battery so that the outputvoltage is equivalent to the battery voltage plus the output voltage of the converter Connect as shown in fig 2 above Copyrights 1999 Victron Energie B V All Rights Reserved This publication or parts thereof may not be reproduced in any form by any method for any purpose VICTRON ENERGIE B V MAKES NO WARRANTY EITHER EXPESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE VICTRON ENERGIE PRODUCTS AND MAKES SUCH VICTRON ENERGIE PRODUCTS AVAILABLE SOLELY ON AN AS IS BASIS IN NO EVENT SHALL VICTRON ENERGIE B V BE LIABLE TO ANYONE FOR SPECIAL COLLATERAL INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF PURCHASE OR USE OF THESE VICTRON ENERGIE PRODUCTS THE SOLE AND EXCLUSIVE LIABILITY TO VICTRON ENERGIE B V REGARDLESS OF THE FORM OF ACTION SHALL NOT EXCEED THE PURCHASE PRICE OF THE VICTRON ENERGIE PRODUCTS DESCRIBED HEREIN For conditions of use and permission to use this manual for publication in other than the English language contact Victron Energie B V Victron Energie B V reserves the right to revise and improve its products as it sees fit This publication describes the state of this product2. at the time of its publication and may not reflect the product at all times in the future Victron Energie BV The Netherlands Phone 31 36 535 97 00 Fax 31 36 531 16 66 Customer support desk 31 36 535 97 77 E mail sales victronenergie nl Internet site http www victronenergie nl Doc No Or122408 doc Version 00 Date 10 09 1999
3. victron energie Ny g USER MANUAL Orion 12 24 8 Orion 12 24 8 is a push pull converter with a galvanic separation between input and output The input voltage can vary from 10V DC to 16V DC The output voltage is almost the same as the input voltage which can vary from 10V DC to approx 16V DC When loaded the output voltage falls to below 10V DC when the input voltage is low Graph showing input voltage output voltage and load current Outputvoltage VDC Inputvoltage 1s SEE Peppa EEE me a Ee i ore ee s L Teg me Pa 2 ETTET oe Sake SERRE aan 7 H Load current eS A dS OO H C123 45 6789 WA In order not to drain the battery the converter should be disconnected from the battery when it is not in use as it has an idling current of approx 0 4A 24V DC Fuse 16AF Fig 1 Fig 2 Fuse 164 F The converter generates heat during operation and shall therefore not be placed in a warm location Positioning in a humid location should also be avoided If the converter is used for long periods with overload and or in excessively warm ambient temperatures its lifetime may be reduced drastically In order to reduce noise and to achieve lower voltage loss from the leads the leads from the battery should be positioned along parallel lines and be as short as possible The leads out to the load should also be placed in parallel lines Recommended minimum lead cross section 2
Download Pdf Manuals
Related Search