User guide
Contents
1. M2 shower commode chair with 24 inch wheels The axel is clicked into the bush Pull the wheel to make sure it is correctly mounted But be careful not to tighten the bolts too much Using the chair without the driving belt the wheels will get more elastic when you receive the chair it is adjusted to the middle position in height How to adjust the height The bushings to the 24 inch wheels are taken off with a wrench key and moved to the desired height The anti tip bar Is moved to the same postion as the 24 inch wheels The clips holding the front wheels are taken out and the front wheels are moved to the desired height The front wheels can be pu in a position which is ONE 1 position different from the 25 inch wheels if you want the chair to be slightly tilted All other adjustments shall be in the same position For example in the top hole Double check that all nuts and bolts are tightened and that all the clips are pressed in place Make sure to tighten the bolts well With the help of an unbraco key you tighten the screws so they give the wanted brake impact Tighten the bolts well Pushing the footrests aside Lift them and turn them to the side you want The plastic plate can be tipped up if you want to take them to take up very little space Height adjusting the footrests Adjust the height of the footrests by taking the clips out placing the footrests in the wished position and last put the clips2. back again Pan bucket When sliding the bucket of the chair it is important to slide it straight backwards along the seat Otherwise it can be very difficult to get the bucket of the chair WARNING RISK OF ROLLING OR GLIDE OUT TO AVOID THE CHAIR CAN ROLLS OR GLIDER IN TRANSFER TO ALL 4 WHEELS BE LOCKED ATTENTION IF THERE IS SMOOTH SURFACE THERE IS STILL A RISK OF THE CHAIR CAN ROLL OR GLIDE DO NOT SIT ON THE OUTER 10 CM OF THE SEAT THAT THE CHAIR CAN TIP FORWARD DO NOT STAND ON THE FOODRESTS Check with proper intervals the fastening of the wheels to the leg Cleaning 2 Years complaint rights against manufacturing errors The product can be cleaned with regular cleaning without Terms of claim for frame non abrasive detergent Wash and dry the product after the HMN grants 5 years claim rights against frame break down for all M2 cleaning The product can be washed up to 85 degrees in Shower commode chairs and stainless steel shower stools 3 minutes The warranty applies for production and material break downs and can only be used if the products have been in normal use 11 05 15 produced in the EU Please note that the normal wear is not included in the warranty HMN a s Midtager 22 2605 Br ndby Denmark Tel 45 43 96 24 00 Fax 45 43 96 26 92 E mail info hmn dk www hmn dk
Download Pdf Manuals
Related Search