Operating Instructions
Contents
1. Precautions WARNING CAUTION exposure To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture Use of controls or adjustments or performance of proceduresthose specified may result in hazardous radiation CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel appliance The lightning flash with arrowhead symbol with in an equilateraltriangle is intended to alert user to the presence of uninsulateddangerous voltage within the product enclosure that may beof sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating andmaintenance servicing instruction in the literature accompanyingthe pe CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID DIRECT EXPOSURE TO LASER BEAM Cautions on Using this Player pound playback the dise spins athigh speed SS EE so do notliftor move the player Doing so may damage the disc We strongly advise against using the player while driving Transporting the player Most countries and states have laws which When transporting the player be sure to remove the prohibit or s2. may cause the print or coating to peel off Also avoid leaving rubber or plastic products in contact with the player for long periods of time as this may damage the cabinet When using chemically treated cloths read the cloth s instructions carefully Always unplug the power cord from the power outlet before cleaning the player To clean dirt off the liquid crystal display wipe the display gently with a soft dry cloth such as an eyeglass cleaning cloth Note that leaving water droplets on the display for long periods of time may result in discoloration or stains For tough dirt use a commercially available liquid crystal display cleaner Unauthorized duplication broadcast public performance or rental of discs is prohibited by law Checking the Accessories After unpacking check that all the accessories listed below are included Specifications DVD Vedi oe Disc type Vedi 9 MP3 DVDs 12cm edio JPEG VIDEO etal Vedio CDs 12cm LINE OUT 20Hz 20kHz Audio output Earphone output Mem Audio CDS 12cm dise Video output Vedio output P Video output 1 0Vpp 75ohm n MP3CDs 12cm Optical digital audio output 7 color TFT JPG LCD panel JPG JPGCDS Wem E Pixels 1440 X 234 P AC DC adapter 12V 1 5A Noted Battery 7 4V 3100mAh Don t using the disc that is scratched seriously Unit size 192mmX148mmX26mm 8cm disc not be played on thi
3. A ENTER to select the amp 9 m Press A B again the main proper playing item 9 6e ee unit will repeat the play m Input digit to select 0000 from A to B paying 1 7 99 9 W Press again the unit chapter or trac i Tepeat W Press ENTER to confirm ae ee Sh the playing item i m Press SEARCH to resume the play mode 2 Repeat playing the title chapter or track 2 oomplaying 0000002 chapter or track when the unit is play mode DVD title chapter VCD or CD track W Press ZOOM every times the picture will change to 2X 3X AX 1 2X 1 3X 1 4X and normal Note ZOOM W Please press SHIFT to select the FUNCTION mode of the remote control unit first BASIC OPERATIONS The main unit may play the list according to the following program list PROG 1 Press PROGRAM the menu will be shown in the LCD Hint W T is for Title is for Chapter for DVD disc W T for track for CD VCD Play Clear Note There is no title chapter or track for some disc Program 2 Using digit 4 9 and cursor to select the list what you want See the picture TC TC TC 101 001 Bel g i 202 002 Eee pee 101 geile 4 2 4 Bele fae Play Clear Exit 3 Using the cursor key to move the cursor to the PLAY icon and press ENTER to start to play the list 4 Using the cursor key to move the cursor to the CLEAR icon and pr
4. SHOOTING GB 2 WARNING ATTENTION LASER A Precautions Thank you for purchasing Portable DVD player Please read this manual carefully before operating and reserve it for future reference It will be helpful to you if you encounter any operational problem TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT This Digital Video Disc player employs a Laser System To ensure proper use of this product please read this owner s manual carefully and retain for future reference Should the unit require maintenance contact an authorized service location see service procedure Use of controls adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure To prevent direct exposure to laser beam do not try to open the enclosure Visible and invisible laser radiation when open and interlocks defeated DO NOT STARE INTO BEAM LASER Type Semiconductor laser GaAlAs CLASS 1 Wave length 650 nm 780nm LASER PRODUCT Output Power 5mW Beam divergence 60degree
5. m Default OFF SYSTEM SETUP 1 Default setting 0000 2 When unlock new parent lock can be input and select the parent lock level This setting can control the unit play parent lock DVD disc m Level is divided into 8 level KID SAFE G PG PG 13 PG R R NC 17 ADULT Wm Selecting ADULT the lock is cancel m Default ADULT Note E The parent lock level can not be set if the parent lock is locked MAIN UNIT SETTINGS There are 4 FM frequency point in this unit W ON FM transmitter switching on m OFF FM transmitter switching off m Default OFF Note m To enter last page set please select prev page item and press ENTER To restore the factory setting please select this item and press ENTER SYSTEM SETUP RESTORE Note W To enter last page set please select last page item and press ENTER Please enter the OSD language select menu use cursor key 4 to move the cursor to the language what you want and press ENTER Please enter the audio language select menu use cursor key to move the cursor to the language what you want and press ENTER MAIN UNIT SETTINGS Please enter the sub title language select menu use cursor key to move the cursor to the language what you want and press ENTER Please enter the menu language select menu use cursor key 4 4 to move the cursor to the language what yo
6. this unit 1 Set a proper volume of this unit 2 Press SETUP the set up menu will be displayed The FM output option may be selected There are 5 choice to select 88 1MHz 88 3MHz 88 5MHz 88 7 MHz off Note o m If there is noise in the FM radio system SYSTEM please select another frequency E m f no sound please check the volume level MAIN UNIT SETTINGS Please select the proper video signal system if you want to see on a TV set NTSC please select this item when TV set is NTSC system TV set E PAL please select this item when TV set is E PAL system TV set Default PAL Hg NENNT ENNEN SYSTEM SETUP Note m The picture may be a grey picture if the system is not correctly set This function can save the TFT life if he unit stay in stop no disc over 1 minutes m ON screen saver enable W OFF screen saver disable m Default ON SYSTEM SETUP TvsvstEM MAIN UNIT SETTINGS 16 9 Please select this item when connecting this unit to a 16 9 TV set 4 3LB Please select this item when connecting this unit to a normal TV set 4 3PS Please select this item when connecting this unit to a normal TV set Note W Picture scale is depending the disc Please set digital audio output ON when using digital audio optical output ON switching on digital audio through optical OFF switching off digital audio output
7. By recycling material recycling or other forms of re utilization of old appliances you are making an important contribution to protect our environment Please inquire at the community administration for the authorized disposal location
8. D display mode Reverse AV output Input mode Volume and then using buttons to adjust Part names and functions 5 6 m Brightness level 0 level 12 Color level 0 level 12 Contrast level 0 level 12 LCD display mode switch screen size 16 9 4 3 W Reverse switch screen normal or reverse Normal Reverse W AV output input mode press in AV output mode or AV in mode W Volume level O level 15 buttons W Press these buttons to increase decrease the volume when the main unit is in play mode E Press these buttons to adjust LCD mode when in LCD mode Eject button m Press this button to eject the disc when a disc is in the main unit Part names and functions 1 Support Pull out the support to the proper position in order to let the unit stand 2 Battery connector Lock the battery power on the unit Note 3 W To avoid the short the connector 3 Battery socket 4 Battery locker 1 Fixed hole Battery support Pull out the support to the proper position in order to let the unit stand when battery is installed in the unit Unlock button for remove battery Press this and pull down to remove the battery Battery LED indicator lt 1 gt Install the battery to the main unit and plug in AC DC adapter lt 2 gt LED indicator is red when battery is being charged LED indicator is off when battery is f
9. E SA SN ELECTRONICS DVD VCD CD MP3 JPG Operating Instructions ORTABLE TABLET DVD PLAYER MT 768 mes VIDEO Content TYPES OF DISCS PLAYABLE ON THIS SPECIFICATIONS PRECAUTIONS BEFORE USING THE BATTERE atit estet dioitene testo iieri BATTERY STORAGE BATTERY LIFE USING THE BATTERY INSTALLING THE BATTERY REMOVING THE BATTERY RECHARGING THE BATTERY BY USING AC DC 19 CAUTIONS WHEN CHARGING THE ae s food a UD NIT a eli PART IN THE LEFT SIDE OF THE MAIN UNIT 09 PART IN THE TOP OF THE MAIN UNIT MAIN UNIT CONTROL SECTION 10 PART IN THE BACK OF THE MAIN 11 PART IN THE BOTTOM OF THE MAIN UNIT 11 PART IN THE BATTERY 12 REMOTE CONTROL UNIT 13 PRECAUTIONS BEFORE USING REMOTE 09 CONTROL UNIT artic 15 REMOTE CONTROL UNIT OPERATING RANGE 15 INSTALL BATTERY FOR REMOTE CONTROL UNIT isisi 16 CONNECTING TO AC DC CONNECTING EARPHONE CONNECTING TO USB STORAGE CONNECTING TO MEMORY CARD SD MMC MS 21 CONNECTING TO A TV 22 CONNECTING TO A N AMPLIFIER THAT HAS NOT THE DIGITAL AUDIO DECODER 23 CONNECTING TO AN AMPLIFIER THAT HAS DIGITAL AUDIO DECODER DOLBY DT
10. S MPEG 24 CONNECTING TO A ACTIVE SPEAKER SYSTEM 25 CONNECTING TO A AUDIO VIDEO PLAYER SYSTEM dine edu 26 BASIC OPERATIONS 27 TURNING ON OFF THE MAIN UNIT 2 27 PEAYING DISGS 2255 28 REMOVING 28 MODE SETTINGS BRIGHTNESS CONTRAST COLOR TFT DISPLAY MODE TFT REVERSE MODE AV OUT IN MODE VOLUME 29 STOPPING THE PLAYING 30 PAUSING THE DISC ete tienes 30 SCANNING FORWARD AND BACKWARD 30 SLOW PLAYING THE 30 REPEAT PLAYING THE DISC 31 SEARCHING THE DISC as 31 ZOOM PLAYING 31 PROGRAM 32 USING OSD 33 SELECTING A SUB TITLE 33 SELECTING AN AUDIO 2 33 SELECTING AN ANGLE 33 PLAYING MP3 AND JPEG DISC 34 PLAYING THE FILE STORING IN A USB NE 35 PLAYING THE FILE STORING IN A MEMORY CARD 35 USING FM TRANSMITTER OPTION 36 Content 10 MAIN UNIT SETTINGS SELECTING A TV SYSTEM es SETTING SCREEN SELECTING A TV SCALE SETTING DIGITAL AUDIO OUTPUT Y SETTING PARENT lOCK 5 SETTING PARENT LOCK LEVEL SETTING FM TRANSMITTER OPTION DEFAULT SETTING SELECTING A OSD LANGUAGE SELECTING AN AUDIO LANGUAGE SELECTING A SUBTITLE LANGUAGE s SELECT A MENU 11 TROUBLE
11. ccording to the direction then pull out the battery holder A 2 Remove the old battery then insert Note the new battery into the battery holder To prevent leakage offluid from the with the side facing upwards lithium battery remove the battery when not using the remote control unit for long periods of time one month or more Ifthe battery leaks fluid carefully wipe it out of the battery case then change to a new lithium Lithium battery Cr2025 battery USING THE BATTERY m Please fully charge the battery unit before E The battery unit can be used for about 300 using it for the first time cycles of recharging and operations though When the battery unit is recharged in a hot this is variable depending on the operating environment it may not recharge fully conditions W The battery unit becomes hot after recharging but this is not malfunction m The main unit can be playing over 3 hours if the battery is fully recharged W The picture may be unstable if the battery power is not enough W Please recharge the battery when the main Battery storage 00 unitis power off Otherwise the battery recharge will takes about 8 to 9 hours Please place the battery a proper environment Press OSD when the unit is in play mode 15 C 25 C To avoid place the battery in a hot the battery power can be shown in the or lower temperature environment OSD m Shows battery capacity 2 Pl
12. ease recharge one time every year if the shows the battery power is worm out battery is not used in a long time m Please remove the battery unit from the main unitwhenitisnotusedinalong period of time USING THE BATTERY Please install the battery unit as following 1 Attach the battery unit to the main unit 2 Pull up the battery until the battery unit is locked to the main unit 3 Then the power LED indicator is light on Please remove the battery unit as following 1 Power off the main unit 2 Press the battery lock key and pull down the battery unit then the battery is removed USING THE BATTERY Please recharge the battery unit as following Install the battery to the main unit Please plug the AC DC adapter and connect the DC output to DC in of the main unit mLED indicatorred means the battery is recharging m LED indicator is off means the battery is fully recharged Note m Please place the battery on a level flat surface for recharging m Do not short the battery connector The temperature during recharging affects the recharging efficiency Recharging is most efficient between temperatures of 10 C 30 C To protect the battery unit do not recharge a fully charged battery unit repeatedly Repeated overcharging the battery may deteriorate the battery performance When the battery unit is hot it may take longer than usual time for recharging
13. ess ENTER to clear the play list 5 Press PLAY PAUSE or select the EXIT icon and press ENTER to exit program menu Note The program list will be cancel when the main unit is power off or eject the disc B There is no program function for some disc B The unit can not play the list if you select the item that does not exit in the disc BASIC OPERATIONS 1 Press OSD to show the play and disc 1 Press AUDIO to select the audio information in the LCD when the main unit language when the main unit is in play is in play mode mode for DVD disc 2 Press OSD again to disable the information 2 Press AUDIO to select the audio display channel when the main unit is in play mode for VCD CD disc Press SUBTITLE to select the sub title when Press ANGLE to select the play angle the main unit is in play mode when the main unit is in play mode for DVD disc there is no function for other disc SUBTITLE BASIC OPERATIONS uo e 3 4 1 Directory 2 Eee File 3 icon 4 JPEG icon m Using the cursor key 9 44 to move the cursor to the directory file icon or JPEG icon W Selecting MP3 icon and press ENTER if you want to play MP3 selecting JPEG icon and press ENTER if you want to play JPEG W Selecting a file and press ENTER if you want to play the file W Press PLAY PAUSE to play sequence W Press A B to repeat A B playing Note m The LCD will be off if there i
14. everely restrict the use of the disc and turn off the power then unplug the player in vehicles while driving power cord W Do notleave the player or the battery pack in places where the temperature is extremely Place of installation low about 10 C or lower or extremely high Select a stable place near the TV or stereo system to about 60 Cor higher such as inside the which you are going to connect the player passenger cabin or trunk in midsummer Do not place the player ontop ofa TV or color Doing so may warp the outer case or reduce monitor Install the player away from cassette the performance or quality of the battery decks or other devices which are easily affected by pack magnetic forces Do not place any objects on top of the player Heed the airline company s rules If the player is connected to your but notin use Heed the hospital s rules thenswitchthepoweroffthis willprevent interference with your normal TV picture Noise problems may also be experienced if used near a radio Cautions on Using this Player Please turn on the engine and then connect with the car power cable for using Normally clean the player using a soft dry cloth For tough dirt apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth wring out thoroughly wipe off the dirt then wipe the player with a dry cloth Note that alcohol thinner benzene insecticides etc
15. ideo audio signal which inputed by other AV system 7 Press MODE setting volume Hint The volume setting is the default mode Press to adjust the volume directly 1 Press STOP to pause the playing the unit can memorize the play point 2 Press PLAY to continues play from the pausing point 3 Press STOP to stop the disc STOP PLAY Note W The unit can not play to continues playing for some disc 1 Press PLAY PAUSE to pause the playing when playing 2 Press PLAY PAUSE to continues playing BASIC OPERATIONS 1 Press PREV NEXT in the main unit 1 5 seconds to fast the playing when playing in forward REV backward direction 2 Change the playing speed to X2 X4 X8 X20 and normal for every pressing PREV NEXT in the main unit 1 5 seconds Hint The REV FWD in the remote control unit may do fast playing 1 Press STEP SLOW in the remote control unit to slow playing Change the playing speed to 1 2 1 3 1 4 1 5 STEP SLOW 6 1 and 1 7 for every pressing STEP SLOW 2 Press STEP SLOW to skip frame when the unit is in pause mode Note The sound is mute when the main unit is in fast or slow playing except CD and MP3 disc Please press PLAY to resume normal playing BASIC OPERATIONS 1 play mode M Press SEARCH nn i i GOOG m Press the LCD will show m Using cursor key and Repeat
16. igital output to a decoder or amplifier Main unit left side with built in decoder connections to TV Optical digital cable not included Front Front speaker speaker left V Center right speaker Subwoofer Hint For a compatible decoder or amplifier 5 speakers front left right center and surround left right and a subwoofer are required toenjoy Dolby Digital DTS 5 1 channel sound Surround speaker right ra c Signal flow CONNECTING THE PLAYER TO OTHER COMPONENTS Video output input Audio output input Main unit left side Video audio cable yl included To audip input jacks Signal flow Note W Please set the main unit To video input to AV output mode jack Active speaker systems CONNECTING THE PLAYER TO OTHER COMPONENTS Video output input Audio output input Black Video audio cable Yellow included To Audio Output jacks Main unit left side Signal flow Connect to AV system Yello video output Note W Please set the main unit to AV input mode AV system R BASIC OPERATIONS 1 Turn power on m The main unit is in standby mode when the unit is powered Press POWER remote control unit or ON main unit 1 5 seconds to turn on the u
17. nit power indicator led off 2 Turn power off W Press POWER remote control unit or GEF lt MODE VOLUME EJECT OFF main unit 1 5 second to turn off the unit power indicator led light 3 Auto power off W The unit will be auto power off and in standby mode when the unit is stay over 5 minutes which is no disc in the unit or stop status BASIC OPERATIONS 1 Eject disc when there is a disc in the unit 2 Insert disc 3 Reading disc Display DVD or VCD or CD in LCD unit will be played for some disc m Press PLAY to play disc Note W Please insert disc correctly Do not use the disc that is scratched serious 1 Press STOP to stop play 2 Press EJECT to eject disc 3 Take out the disc Please press MODE in the main unit to selecta suitable mode for your favourite when the main unit is in play mode 1 Press MODE setting brightness 2 Press MODE setting color 3 Press MODE setting contrast 4 Press MODE setting LCD display mode 5 Press MODE setting reverse mode 6 Press MODE setting AV output input mode The unit will stop play the disc when it is in AV input mode W Please do not connect signal input when the unit is in AV output mode m AV output mode is default mode BASIC OPERATIONS Note Please press MODE 1 5 seconds then the unit will come back to AV output mode Video audio cable included V
18. of memory card when there is no disc in the main unit CONNECTING THE PLAYER TO OTHER COMPONENTS Before connecting Turn off the power of the player and the devices to be connected Video output input Audio output input Main unit left side Video audio cable included video input jack yellow audio input jack white To audio input jack red Note W Please set the main unit to AV output mode TV c Signal flow CONNECTING THE PLAYER TO OTHER COMPONENTS Output the digital signals from the player s digital output toa digital amplifier that is not Doby DTS MPEG compatible Notes m Carefully check the players digital output settings before connecting the player to an amplifier which is not Dolby Digital DTS MPEG compatible Do not play DVDs when the audio settings are not correct Or may cause strong noise and damageyour speakers Video output input Audio output input weke eos o X Black Optical digital cable not included b Yellow To digital audio input jack Red White Audio input 99 Signal flow CONNECTING THE PLAYER TO OTHER COMPONENTS Video output input Audio output input With this player you can enjoy powerful Dolby Digital DTS or MPEG sound Output the digital signals from the player s d
19. or may sometimes be unable to be recharged Wait for the battery unit to cool down before retrying recharging CONNECTING THE PLAYER TO OTHER COMPONENTS 1 Please plug the AC DC adapter to AC power socket 2 Connecting the DC output of adapter to DC in of the main unit Note AC DC adapter specification 12V 1 5A Please using the adapter thatis the standard accessory of the main unit 1 Connect the earphone plug securely to the earphone jack on the main unit uu To listen to the audio using to adjust penu the volume to a comfortable level Note To earphone jack Earphone Please do not use DTS disc Strong noise is produced when DTS discs is played Note Insert the earphones plug securely No sound will be heard unless the earphones are securely connected CONNECTING THE PLAYER TO OTHER COMPONENTS 1 Please connect the USB storage to the USB terminal of the main unit 2 Themainunitcanbereadthe contentsintheUSBstorage USB storage automatically Note The USB terminal of the main unit TRE support USB 1 1 only left side W The main unit can read the contents of USB storage when there is no disc in the main unit 1 Please insert the memory card to the memory socket of the main unit Memory card 2 Themainunitcanbereadthe contentsinthememorycard automatically Note m Please insert the memory card in right direction The main unit can read the contents
20. s just input TITLE Displaying DVD title 4 Return to menu MENU Menu play DIGIT INPUT 33 ZOOM Zooming the picture A B Press this to set A point press again to set B point then the unit playing from A to B repeated Press 3 rd to cancel the A B play 28 29 30 31 32 20 REPEAT DVD repeat play the title chapter VCD CD repeat the track or whole disc VOL Increasing the volume VOL Decreasing the volume MUTE Switch off the speakers or earphone SHIFT Switching the Digit or Function for the multi function key PROGRAM Programming the play sequence USING REMOTE CONTROL UNIT Please pull out the PVC when the remote control unit is first using Don t drop or step on the remote control unit or subject it to shocks Note that it may not be possible to operate the main unit if there are obstacles between it and the remote sensor m Don texpose the remote sensor to strong light W Using the remote control unit within the specified operating range 1 Horizontal 30 2 Vertical 30 lt 3 gt Distance 5m Note Most of the player s functions can be performed from the remote control unit Some operations however only be performed from the main unit USING REMOTE CONTROL UNIT 1 Insert your finger nails into A and 3 Fit the battery holder back to its place the diagram below press A a
21. s no operation on the unit over 3 minutes when playing CD MP3 And the Power LED will be flash in the status m LCD will be on for any operation on the unit Connecting the USB storage to the USB socket of the main unit the file stored in the storage will be read automatically 1 Power on the unit connecting the USB storage to USB socket in no disc mode 2 READ USB will be shown in LCD and the files will be display in the LCD when the unit finished the reading m uj 3 Operation is like play MP3 or JPEG 4 Please remove the USB storage directly when do not play the USB storage Note m USB in this unit is USB 1 1 The unit must be in no disc mode when play the file stored in the USB storage BASIC OPERATIONS Please insert the card SD MMC MS in to the socket The file will be played automatically 1 Power on the unit inserting the card in to the socket in no disc mode 2 READ CARD will be shown in LCD and the files will be display in the LCD when the unit finished the reading 9 4 Note W The unit must be in no disc mode when play the file stored in the card BASIC OPERATIONS The FM transmitter is built in this unit There 3 Tuning the FM radio system to the are 4 frequency point which can be selected frequency the sound will be heared You could use one FM radio system to receive 4 Adjust a proper volume level the sound from
22. s player A Weight 850g include battery Working 56 45 temperature whNb Power LED indicator Partin the top of he main unit Part names and functions Earphone jack Connecting earphone USB 1 1 socket Connecting USB storage Video output input Output or input video signal Audio output input optical digital N LCD display audio output Output or input audio signal optical digital Speakers audio output IR receiver window 5 12V DC input Control keypad Connecting to AC DC adapter m LED light 1 when connecting AC DC adapter or battery 2 main unit in standby mode m LED flash when playing CD MP3 audio disc and LCD off 1 m LED off main unit is turning on 1 Memory card socket 00000 p ee 1 2 3 Play Pause On button m Press this to play disc When press this in the play mode pause mode is set Press again to resume playback m Press this for 1 5 seconds to power on the unit Stop Off button m Press this to stop play mode B Press this for 1 5 second to power off the unit Standby mode Previous Next buttons WUsing these buttons to scan forward or backward through the tracks or chapters WPress these buttons for 1 5 seconds in fast forward or backward play mode X2 X4 X8 X20 Mode and buttons Press Mode to switch LCD mode Brightness Color Contrast LC
23. u want and press ENTER Note The language will be the disc default language if the language you want is not visible Default language English TROUBLE SHOOTING Please refer the following instruction when there are some problem with this unit If the problem still exit please consult your nearest service center PROBLEM POSSIBLE REASON SOLUTION Disc can not play No picture in TV Disc error Insert disc in right direction Disc dirty or scratch Using good disc Area code error Cable loosen Using right area code disc Insert the cable again Setting error Set TV or this unit correctly Speaker no sound Earphone in use Removing earphone Cable loosen Insert the cable again No sound in TV or amplifier Connecting cable error Different volume Disc recording in different for DVD CD disc way Can not play 8cm 8cm disc is not play in this disc unit Connecting cable correctly Adjust volume level removing disc from the unit TROUBLE SHOOTING Do not dispose of this product in the usual household garbage at the end of its lifecycle hand it over at a collection point for the recycling of electrical and electronic appliances The symbol on the product the instructions for use or the packing will inform about the methods for disposal The materials are recyclable as mentioned in this marking
24. ully charged lt 3 gt LED indicator is off when battery power the unit or battery is removed Battery connector Lock the battery power on the unit Note m To avoid the short the connector Battery socket Battery locker Part names and functions Part names and functions 1 EJECT Eject the disc AUDIO SUBTITLE 2 SUBTITLE Selecting sub title 3 AUDIO DVD selecting audio language VCD or CD Selecting the audio channel 4 POWER Power on off the unit 5 OSD Press this buttons to display the disc and playing information in the LCD 6 ANGLE Press this to select the DVD angle Moving cursor Up 8 SETUP Set up menu when the unit in play mode 9 GOTO Selecting the Title Chapter Time to play 10 Moving cursor Right 11 12 13 14 15 16 17 18 19 a this to confirm settings Moving cursor let STOP Stop playing disc NEXT Skip next track chapter Moving cursor down PREV Skip previous track chapter STEP SLOW Press this to enter slowing play when the unit in play mode Forward Press this to step one frame when the unit in pause mode Press this to fast forward play when the unit in play mode PLAY PAUSE Press this to play or pause 21 22 23 24 25 26 27 Part names and functions REV Press this to fast backward play when the unit in play mode CLEAR Clearing the digit that i
Download Pdf Manuals
Related Search