Installation Manual Wireless Remote Control - Super-Sail
Contents
1. for electronic and electronically equipment Activation in the Alarm system After installation and test the Remote Control must be activated in the Alarm system This is performed via the SuperSail app where the Remote Control is activated via the Alarm menu 14 34 je ALARM 12V Stromforsyning TE SuperSail Carsten Tracker ID Max Hastighed 30 Max Afstand 100 Max Chockpavirkning 1500 Sensorer Sensor 1 Tekst Fjernbetjening ID 1355375 Type Fjernbetjening SLUKKET In the above example we have decided to activate the Remote Control as sensor 1 but all sensors are available for all sensor types In the Text field you can write a short text which identifies the installation of the Remote Control In the ID field you write the ID written on the back of the battery cover The ID is furthermore written on the Quick Guide which follows the Remote Control This ID is unique for the Remote Control and makes it possible for the Alarm system to separate the wireless units Save the ID in case the ID should be deleted from the app and need to be re installed later In the Type filed you choose Remote Control which specifies that the Remote Control is of the type Remote Control Finally the Remote Control is activated by ticking the field next to the Text filed This activates the Remote Control in the Alarm system Turn the alarm on off via the mobile app Only after this2. e Installation Manual Wireless Remote Control Js Installation Manual ail Table of Contents JE TTINGES TAR TED NR iii intra 2 UP 2 N CINE ERN RR RR E RI o 2 ENSTAELSTIONOP BATTERIES erenn E EET 2 ARTFPR INSTALLATIONORBATIERIE Sosaria 3 TESTING THE REMOTE CONTROL Asinara 3 RESBFIO PACEORTSE Nilla niente 4 ha Ns ANC Red RR TR 4 TECHNICAL SPECIFICATION S ornare En EAE m m 4 SAP DIPO S UNE AE AEAEE AEN EEO AEE E AOOO 5 ACTIVATION IN THR ALARM SYSTEM pio nE EAEE E 5 Page 1 of 6 Installation Manual Getting started Congratulation with your new SuperSail product We hope that you will be satisfied with the product and we are always available to give support in case you need it You can contact us at support super sail dk Regards SuperSail Support Team Please read the whole installation manual before starting the installation Unpacking Before you start using the unit you must ensure that the packaging has not been broken or have been injured during transport and that the product is complete and without any visible sign of damage or strained If this is not the case please contact SuperSail before using the product 1 Lock button which turns the Alarm on 2 Unlock button which turns the Alarm off 3 Not used 4 Not used Mounting The Remote Control can be carried in the included key ring Installation of Batteries Open the cover to the battery holder by pushing the cover away f
3. e to low battery level the error code will be shown again by the LED Testing the Remote Control The Remote Control is installed and activated in the Alarm system as described below under Activating in the Alarm system When the Remote Control is activated the alarm must be turned on via the mobile app Hereafter the Remote Control can be tested Push the Unlock button and notice that the light in the Remote Control is turned on shortly After some seconds depending on the time for SMS transfer an SMS Alarm turned off is received Push the Lock button and notice that the light in the Remote Control is turned on shortly After some seconds depending on the time for SMS transfer an SMS Alarm turned on is received If a Siren is installed in the Alarm system a sound signal is heard from the Siren when the Remote Control is used to turn on off the alarm Page 3 of 6 Aer Installation Manual ail Fault search e The light is not turned on when a button is pushed Remove the batteries and re insert them verify that they are aligned correctly Self test as described above under After Installation of Batteries will verify if there are any faults on the Remote Control e Light is turned on but SMS is not received Verify if the Remote Control is activated correctly in the Alarm system as described below under Activation in the Alarm system Verify that the Remote Control ID is key
4. ed in correctly Turn on and off the Alarm system from the mobile app Try the Remote Control again Reset to Factory settings If the Remote Control for some reason does not function and the batteries have been changed without solving the problem reset to Factory settings can be a solution to fix the problem Press and hold the button for 5 seconds until the LED starts blinking slowly with red light use a tip pen release the button Press and hold the button for further 5 seconds until the light in the main sensor starts blinking faster red use a tip pen Release the button and the LED will stop blinking red The Remote Control is reset to Factory settings Maintenance The Remote Control is maintenance free Repairs should be carried out at an authorized service center Cleaning can be carried out with a soft cloth wrenched in lukewarm water Cleaning detergent containing solvent can harm the unit Technical Specifications Radio frequency 868 3 MHz Typical outdoor range 100m Power 1 x 1 5V LROS Micro AAA battery Battery life time Approx 5 years by 5 daily activations Page 4 of 6 Aer Installation Manual ail Protection IP20 Color Graphite black Size 38x75x14 mm HxBxD Weight 26g Remote Control ex battery Changes may apply Safe Disposal m Should not be disposed a domestic waste MH LAY T A Electronic equipment should be disposed according to the local regulations
5. rom the unit Some force is needed to do this Page 2 of 6 Nos Js Installation Manual ail The cover can now be turned upwards and it is possible to get into the battery holder The cover remains fastened to the Remote Control Install the included LROS AAA Micro battery in the battery holder as shown on the unit The batteries are maintained by the spring in the holder Close the cover by turning the cover back in place and push it in place towards the center of the Remote Control until it click in place Some force is needed to do this nf ne Used batteries should not be disposed a domestic waste amp Batteries should be disposed according to the local regulations for batteries After installation of Batteries When new batteries are installed the Remote Control will initialize This will normally be finished after approx 2 seconds Ready for use is indicated by a short blink with the LED red orange and green If an error is discovered this will be indicated by blink with the red light 5 short red blink after activating Battery level low ieee Sone Exchange the batteries 1 long red blink and 2 short red Remote Control is defect blink after activating one of the buttons Exchange the unit Even that the battery level is low and as long as the battery level allows for it the Remote Control will remain active and report status to the Alarm system If the Remote Control is not able to send status du
6. the Remote Control is registered correct in the Alarm system and the alarm is now able to be turned on off from the Remote Control Page 5 of 6
Download Pdf Manuals
Related Search