CTM-1322 S User Manual
Contents
1. Oy Ww Rp eS User Manual Picture A Upper HDD Safety Lock amp Lower HDD Safety Lock Push right to open amp push left to lock See Picture C OPEN Picture C A3 Al HDD O LED Green HDD working Green Off Not working or no HDD Aia Power LED Green Power on A2 HDD 1 LED Green On HDD Working Green Off Not working or no HDD A3 Upper cover amp HDD extractor A4 Lower cover amp HDD extractor A5 Upper HDD Safety Lock Push right to open amp push left to lock HDD Installing Description A6 Push the rise high position to open the upper amp lower cover CTM 1322S is a 2 in1 backplane It holds one or A 7 Lower HDD Safety Lock Push right to open amp push left to lock r Features two 2 5 SATA hard or solid state disks in Features one 3 5 form factor drive bay HDD Auto Eject Weight 0 23 kg Picture B Transfer rates up to 3 0Gh s LED indicators for active HDDs Dimension 101 7x 25 8 x 146mm Thermal conducting aluminum frame Open the upper amp lower cover and put the HDD inside the cage You can install one HDD or two HDDs Energy saving on using 2 5 HDD or SSD Assembly mounts in a standard 3 5 drive bay Complies with SATA 1 5Ghb s and SATA 3Gb s specifications Interface 7 Pin data 2 and 15 pin power 1 SATA connectors B1 SATA 15pin power connector B2 SATA 7pin data connector for HDD 0 Fits any desktop tower or rack mount system with availa2. ble 3 5 bay B3 SATA 7pin data connector for HDD 1 Hardware Installation Procedures 6 There are two ways to mount the CTM 1322 S on the device bs C H E F T E C Picture E 1 Mount CTM 1322 S on the floppy drive bay Please follow the following procedures to complete the hardware Picture E 2 Mount CTM 1322 S inside the case installation Open the package and take out the product and make sure the product is brand new and all the necessary parts are included If damage or shortage occurred please contact your distributor or where you bought Unlock the upper and lower covers see picture C push the lock rightward and open the two covers and then put the two 2 5 SATA HDD inside the box See Picture D Picture E 1 After both HDDs installed push both covers back like picture C and then push the lock button leftward to lock both covers to secure the HDD inside properly Then mount the CTM 1322 S on the 3 5 space using the included screws to mount it on the device desktop case etc and make all the cable connected properly and it is ready for use See the drawing of the two ways to mount CTM 1322 S on the device See Picture F Screw position to mount like a 3 5 hard drive Picture E 2 Mount CTM 1322 S inside the case
Download Pdf Manuals
Related Search