Home

User Manual FV6030 VoIP Phone

1. 47 Syslog server receives the messages from clients and classifies them based on priority and type Then these messages will be written into log by some rules which administrator can configure This is a better way for log management 8 levels in debug information Level 0 emergency This is highest default debug info level You system can not work Level 1 alert Your system has deadly problem Level 2 critical Your system has serious problem Level 3 error The error will affect your system working Level 4 warning There are some potential dangers But your system can work Level 5 notice Your system works well in special condition but you need to check its working environment and parameter Level 6 info the daily debugging info Level 7 debug the lowest debug info Professional debugging info from R amp D person At present the lowest level of debug information send to Syslog is info debug level only can be displayed on telnet MAINTENANCE Ateneo SYSLOG Meal Meuse a Musee Syslog Set 4 3 5 3 Config Setting 48 MAINTENANCE tae eure Meri CONFIG eeu Mc A 6 sd Save Configuration Press the Save button to save the configuration files Backup Configuration Save all Network and VoIP settings Right Click here to Save as Config File txt Clear Configuration Press the Clear button to Clear the configuration files Clear Config Se
2. 4 Pressing Soft2 Enter and pressing A there is 3 PPPoE Set shown on the screen After pressing Soft2 Enter again screen displays Account user123 pressing Soft2 Edit and then pressing Softl Del to delete you can input your PPPoE s account and press Soft2 Save With saved displayed screen will jump to show the account information currently 5 Pressing gt to show 2 Password and press Soft2 Enter press Soft2 Edit again input your PPPoE s password and then pressing Soft2 Save With Saved displayed screen will jump to show the password information currently 6 Pressing Soft3 Quit to quit and pressing gt to show 1 Net Mode Pressing Soft2 Enter and pressing Soft2 Edit again and pressing a also screen jump to lt gt PPPoE With Soft2 Save pressed again screen will show Saved and then jump to show the net mode currently 7 pressing Soft3 Quit four times to quit to stand by status and pressing wah un to shows PPPoE phone tries to connect server to get IP If there is shown Negotiating it shows that the phone is trying to access the PPPoE Server else it shows that the phone has already get 9 IP with PPPoE Setting Static IP mode static ADSL Cable or none PPPoE DHCP network 1 Prepare the network s parameters first IP Address Netmask Default Gateway and DNS server IP address are needed Please contact the service provid
3. TN E 7 O Version VOIP PHONE V1 7 176 166 Jun 16 2008 18 34 29 Explanation Shows the configuration information on WAN and LAN port Network including the connect mode of WAN port Static DHCP PPPoE MAC address the IP address of WAN port and LAN port ON or OFF of DHCP mode of LAN port Phone Number Shows the phone numbers provided by the SIP LINE 1 5 servers The last line shows the version number and issued date 4 3 1 2 Wizard BASIC Network Mode Select Static MODE O DHCP ODE O Pro MODE QOS Field Name Explanation PPPoE MODE O 20 Please select the proper network mode according to the network condition FV6030 provide three different network settings o Static If your ISP server provides you the static IP address please select this mode then finish Static Mode setting If you don t know about parameters of Static Mode setting please ask your ISP for them DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially PPPoE In this mode your must input your ADSL account and password You can also refer to 3 2 1 Network setting to speed setting your network Choose Static IP MODE click NEXT can config the network and SIP default SIP1 simply also can browse too Click BACK can return to the last page Static IP Set Static IP Address Input the IP address distributed to you Netmask Input the Netmask distribu
4. new when user edits message press key that to switch input method e g ABC uppercase English input abs lowercase English input 123 digit input Korean Korean input if your phone s firmware version supports Korean PY if your phone s firmware version supports Chinese Memo function Press soft3 Memo key in standby then Softl ADD key at this time user can configure the future date time in terms of Time format next press down key to input the memo content also can press to switch input method down key again to enter into reminder ring tone and down key at the third time to enter into ring mode You can press right or left key to select your reminder ring tone after you enter into reminder ring tone and select your ring mode by pressing right or left key after entering into ring mode There are two ring modes ring and text Ring is reminder you by ring tone text only show memo content without ring tone reminder Finally press soft2 save key to save your memo Note if there is memo notice when your phone is in call off hook hands free earphone status phone does not reminder by ring tone only shows memo content in screen O Realize Secondary Dial by Dialing for only one time When you make secondary dial in off hook hands free earphone or standby pre input mode press button to postpone input and screen display will show one stands for 2 seconds For example you input 123445 the phone will se
5. After Switchboard recelved Swdtchhoard the Broadcast Frame only transmit it to other Pa port which belong to same fr VLAN with send port Broadcast Frame Broadcast iFrame LANA e i Domain a mg TE Nie soe Chart 2 In chart 1 there is a layer 2 switch without setting VLAN Any broadcast frame will be transmitted to the other ports except the send port For example a broadcast information is sent out from port 1 then transmitted to port 2 3and 4 In chart 2 red and blue indicate two different VLANs in the switch and port 1 and port 2 belong to red VLAN port 3 and port 4 belong to blue VLAN If a broadcast frame is sent out from port 1 switch will transmit it to port 2 the other port in the red VLAN and not transmit it to port3 and port 4 in blue VLAN By this means VLAN divide the broadcast domain via restricting the range of broadcast frame transmition Note chart 2 use red and blue to identify the different VLAN but in practice VLAN uses different VLAN IDs to identify ee NETWORK We MESA 00s ESTAR EE au EN ke Voice 502 19 priory Jo 0 7 __ oateaoaavedorty o QoS Configuration VLAN Enable Before select it to enable VLAN you need enable Bridge mode in LAN config Enable VLAN ID check by selecting it After enable VLAN ID VLAN ID Check Enable check if VLAN ID of a data package is not the same with the phone s or a data package do not have VLAN ID the data package will
6. Echo Test Number number is non numeric system could set an echo test number to replace the echo test text So user can dial the numeric number to test echo voice test This function is provided with server to make endpoint to test whether endpoint could talk through server normally Echo Test Text Specify echo test text s name 35 Refresh Time Set expire time of A X2 server register you can set it between 60 and 3600 seconds Enable Register Start to register the IAX2 server or not by selecting it or not Enable G 729 Enable or disable code G 729 by selecting it or not 4 3 3 3 Stun Config In this web page you can config SIP STUN STUN By STUN server the phone in private network could know the type of NAT and the NAT mapping IP and port of SIP The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private network Send request to Stun server AT l apping aort 12345 Stun server tell ant to receive data from S060 aort Private Network Public Network ce rr APPLY STUN STUN NAT Transverse Shows STUN NAT Transverse estimation true means STUN can penetrate NAT while False means not STUN Server Addr Set your SIP STUN Server IP address e STUN Server Port Set your SIP STUN Server Port Set STUN Effective Time If NAT server finds that a NAT STUN Effect Time mapping is idle after time out it
7. Denv Permt Dew pesar a el por range morenen YT pesas lt P Rule Delete inporzompat mo fiero Be veretes Firewall Configuration In this web interface you can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet input rule or prevent unauthorized private network devices from accessing the Internet output rule Firewall supports two types of rules input_access rule and output_access rule Each type supports at most 10 items Through this web page you could set up and enable disable firewall with input output rules System could prevent unauthorized access or access other networks set in rules for security Firewall is also called access list is a simple implementation of a Cisco like access list firewall It supports two access lists one for filtering input packets and the other for filtering output packets Each kind of list could be added 10 items We will give you an instance for your reference C In_access Enable C Out_access Enable explanation 53 out_access enable Select it to Enable out_ access rule Input Output Specify current adding rule by selecting input rule or output rule Src Addr Set source address It can be single IP address network address aaa complete address 0 0 0 0 or network address similar to 0 Des Addr Set the destination address It can be IP address network address A ecos rana Set the source address
8. Digital Rule table Digital Map Configuration Field name End with Set Enable Disable the phone ended with dial Fixed Length Specify the Fixed Length of phone ending with Set the timeout of the last dial digit The call will be sent after Time out timeout Digital Rule table Below is user defined digital map rule Specifies a range that will match digit May be a range a list of ranges separated by commas or a list of digits x Match any single digit that is dialed Match any arbitrary number of digits including none Tn Indicates an additional time out period before digits are sent of n seconds in length n is mandatory and can have a value of O to 9 seconds Tn must be the last 2 characters of a dial plan If Tn is not specified it is assumed to be TO by default on all dial plans Cause extensions 1000 8999 to be dialed immediately Cause 8 digit numbers started with 9 to be dialed immediately Cause 911 to be dialed immediately after it is entered 44 Cause 99 to be dialed after 4 seconds Cause any number started with 9911 to be dialed 4 seconds after dialing ceases Notice End with Fixed Length Time out and Digital Map Table can be used simultaneously System will stop dialing and send number according to your set rules 4 3 4 4 Phone Book You can input the name phone number and select ring type for each name here ee etme MA PHONE BOOK MATAS Phonebook Table
9. In this status user can press or Soft2 Conf to make calls mode in conference mode If user wants to stop conference user can press Soft Split User must enable call waiting and three way call first Note the server that user uses must support RFC3515 or it might not be used e Alert Transfer During talk press firstly then press Soft2 Send after inputting the number that you want to transfer You are waiting for connection now press Soft2 Transf and the transfer will be done To use this feature you need enable call waiting and call transfer first 3 5 Call hold During talking user could press mania to hold the current call Press mania again to unhold the call or switch the call active This feature is also available in 3 way conference call 3 6 3 way conference call User can press Softl Conf to dial the line2 press Softl Answer to answer the call directly if this call is from line2 during talking with linel After line2 connect user can press Soft2 Conf or to enter into conference mode To back to linel from conference please press Softl Split to end the call please press Soft3 End or ores 3 7 Switchboard Operator feature User can press Soft1 Conf to dial the line2 press Softl Answer to answer the call directly if this call is from line2 during talking with linel After line2 connect user can press Softl Switch to I select which line you prefer to transfer then press to i
10. Static Mode setting please ask your ISP for them DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially PPPoE In this mode your must input your ADSL account and password You can also refer to 3 2 1 Network setting to speed setting your network Static IP Address 192 168 1 179 Memes s o If you use static mode you need set it Input the Gateway address distributed to you Set DNS domain postfix When the domain which you input can DNS Domain not be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Alter DNS Input your standby DNS server address PPPOE Server ANY Username luser123 Password A y If you uses PPPoE mode you need to make the above setting PPPoE Server It will be provided by ISP Input your ADSL account Input your ADSL password 24 Notice 1 Click Apply button after finished your setting IP Phone will save the setting automatically and new setting will take effect 2 If you modify the IP address the web will not response by the old IP address Your need input new IP address in the address column to logon in the phone 3 If networks ID which is DHCP server distributed is same as network ID which is used by LAN of system system will use the DHCP IP to set WAN and modify LAN s net
11. Transfer Call Waiting 3 Ways Call Black List white list Limit List and so on 4 PHONE ecm CALL SERVICE MA Ma MS Call Service Setting iN AnswerTime o seconds Black List O O Aa 1 O Limit List LO O lt A Call Service Hotline Specify Hotline number If you set the number you can not dial any other men numbers No Answer Specify No Answer Time A Set Prefix in peer to peer IP call For example what you want to dial is P2P IP Prefix 192 168 1 119 If you define P2P IP Prefix as 192 168 1 you dial only 119 to reach 192 168 1 119 Default is If there is no Set it means to disable dialing IP Remote Record Set Remote Record number Via dialing this number you can hear all voice No records in your VoIP server Do Not Disturb Select NO Disturb the phone will reject any incoming call the callers will be reminded by busy but any outgoing call from the phone will work well Ban Outgoing If you select Ban Outgoing to enable it and you can not dial out any number Enable Call Enable Call Transfer by selecting it Tt ee Enable Call Enable Call Waiting by selecting it Tang NA Enable Enable Three Way Call acct Accept Any If select it the phone will accept the call even if the called number is not belong to the phone If select it the phone will auto answer when there is an incoming call Enable Voice If select Enable Voice Record when no answer t
12. Via rport is special way to realize SIP NAT 133 Enable PRACK Enable or disable SIP PRACK function suggest use the default config Long Contact Set more parameters in contact field connection with SEM server Select call forward mode the default is Off Off Close down calling forward Forward Type Busy If the phone is busy incoming calls will be forwarded to the appointed phone No answer If there is no answer incoming calls will be forwarded to the appointed phone Always Incoming calls will be forwarded to the appoint phone directly The phone will Prompt the incoming while doing forward Forward Phone Number Appoint your forward phone number Server Type Select the special type of server which is encrypted or has some e na Select DTMF sending mode there are three modes Oo DTMF RELAY DTMF Mode DTMF_RFC2833 Oo DTMF_SIP_INFO Different VoIP Service providers may provide different modes Select SIP protocol version to adapt for the SIP server which uses RFC Protocol Edition the same version as you select For example if the server is CISCO5300 you need to change to RFC2543 else phone may not cancel call normally System uses RFC3261 as default Transport Protocol Set transport protocols TCP or UDP RFC Privacy Edition Set Anonymous call out safely Support RFC3323and RFC3323 Transfer Expire Time For the phone supports the transfer of certain special features server set interval time b
13. be discarded After enable VLAN system will set packets with different type of VLAN ID Undifferentiated means after using VLAN both voip packets and other data packets will use the voice VLAN ID tag Voice Data VLAN differentiated means after using VLAN voip signal and voice differentiated packets will add voice VLAN ID and other data packets will add data VLAN ID data untaged means after using VLAN only voip packets will add voice VLAN ID Other data packets will not use VLAN DiffServ Enable Select it or not to Enable or disable DiffServ DiffServ Value Set DiffServ value the common value is 0x00 Voice 802 1P Priority Specify 802 1P Priority of voice signal data package Data 802 1P Priority Set 802 1p of data VLAN Non voip data such as http telnet ping etc will use this value to set VLAN package Data VLAN ID Set 802 1q of data VLAN ID Non voip data such as http telnet ping etc will use this value to set VLAN package NOTICE 1 Startup VLAN if set Voice Data VLAN differentiated as Undifferentiated all packets will use the Voice VLAN ID as the tag 2 Startup VLAN if set Voice Data VLAN differentiated as tag differentiated and disable the DiffServ then system will not distinguish the voice and data all packets will use the Voice VLAN ID as the tag 3 Startup VLAN if set Voice Data VLAN differentiated as tag differentiated and enable the DiffServ then system will distinguish the voice and data and add the VLA
14. can call other phone and the other phone will auto answer User can configure PUSH TO TALK according to the chart 700 is number of callee After configuring the phone can call 700 and make 700 auto answer by pressing this button Oo SMS function Send message 1 Press soft SMS key in standby then press Softl new key After inputting SMS content press Soft2 send key to input callee s number next press Soft2 again to send SMS 2 Press softl SMS key in standby then press softl new key After inputting SMS content press soft2 send key then memory key to send SMS 3 Press softl SMS key in standby then press softl new key After inputting SMS content press soft2 send key then pbook key to select your number to send SMS 4 after inputting SMS content user can press soft2 send key then input and the callee s IP address to send SMS Browse Message and reply message when there s new message phone will ring and remind by a small envelope on top of the screen then press Softl SMS key and Soft2 Enter key to browse current new message when there are more new messages come in user can choose by using up and down keys then press Soft2 Enter 16 key to check the sender s number and message content next press Soft2 Reply key and input message content finally press Soft2 Send again to reply this message Note while user browses the message numbers new messages will be marked by
15. finish setting click the Add button to add new mapping table click the Delete button to delete the selected mapping table DM Table Outside IP 192 168 1 119 192 168 10 23 Shows the outside WAN port IP address and the inside LAN port IP address E Outside IP Set the outside Wan port IP address of DMZ Inside IP Set the inside LAN port IP address of DMZ Click the Add button to add new table click the Delete button to delete the selected mapping table Notice 10M 100M adaptive means the network card and other equipment physical consultations speed testing speed under bridge mode near to 100M in order to ensure the quality of voice and communications real time performance we made some sacrifices of NAT under the transmission performance Transmit with full capability only when system is idle so can not guarantee that the transmission speed reach to 100M 4 3 6 4 VPN Config This web page provides us a safe connect mode by which we can make remote access to enterprise inner network from public network That is to say you can set it to connect public networks in different areas into inner network via a special tunnel Fi We switchboard TEN Pie A 57 SECURITY MO MS TON eee VPN VPN Mode UDP Tunnel L2TP C Enable VPN UDP Tunnel VPN Server Addr 0 0 0 0 VPN Server Port o Server Group ID VPN Server Area Code 12345 VPN Configuration Field name VPN IP Shows the cu
16. is in busy line when A calls B A will get notice busy please hang up If A want to connect B as soon as B is in idle he can use redial function at the moment and he can dials an appointed prefix number plus B s number to realize redial function What is redial function A can t not build a call with B when B is in busy then A will subscribe B s calling mode at 60 second intervals once B is available A will get reminder of rings to hook off while A hooks off A will call B automatically If at this time A is occupied temporarily and unwilling to contact B A also can cancel the redial function by dialing an appointed prefix plus B s number before making the redial function Number Destination port Mode alias Jutis Jpertenn 3 is appointed prefix code After making the above configuration A can dial 3 plus B phone number to make the redial function 4 is appointed prefix code After configuration A can dial 4 to cancel redial function User can set prefix in random in the case of no affecting current dialing rules 3 13 click to dial When user A browses in an appointed Web page user A can click to call user B via a link this link to user B then user A s phone will ring after A hooks off the phone will dial to B 18 4 Web configuration 4 1 Introduction of configuration 4 1 1 Ways to configure FV6030 has three different ways to different users O Use phone keypad Use web b
17. maes ame number ie Ee ea Add Phone Book OA Ring Type a e Phone Book Option Phone Book pe e mr e A a SA Shows the detail of current phonebook Shows the name corresponding to the phone number Ring Type Shows the ring type of the incoming call Click Modify to change the selected information and click the Delete to delete the selected record Notice the maximum capability of the phonebook is 500 items 4 3 4 5 Function Key 45 PHONE EES Bees SA asis FUNCTION KEY Interface Configuration comet JS 9 Luminance E o CTO men AA EE Function Key Setting Une SIP5 MNames5 Set a function key as listening record in server Select key event in MWI Number a function key type and fill F_MWI in the corresponding table After you set it you can pick up or handsfree then press this function key to listen record in server Function Key Setting Memory Key you can set a number for each memory key After set it you can dial the number you set by pressing this memory key Line select SIP1 SIP2 SIP3 SIP 4 SIP5 Dialpeer or IAX2 in function key type After you set it you pick up handset or handsfree press this function key then you can use the corresponding IP line Key event function mode Remark O You can set speed dial function by Memory Key mode For example you need set speed dial 8000 via sip 1 Select memery key in F1 s function key type then fill 8000 1 f in the c
18. mask For example 255 255 255 255 means Src Mask just point to one host 255 255 255 0 means point to a network which network ID is C type Set the destination address mask For example 255 255 255 255 Des Mask means just point to one host 255 255 255 0 means point to a network which network ID is C type Click the Add button if you want to add a new output rule Firewall Output Rule Table deny ICMP 192 168 1 14 255 255 255 0 192 168 1 118 255 255 255 0 Then enable out_access and click the Apply button So when devices execute to ping 192 168 1 118 system will deny the request to send icmp request to 192 168 1 118 for the out_access rule But if devices ping other devices which network ID is 192 168 1 0 t will be normal Rule Delete Input Output Input l Index To Be Deleted D Delete Click the Delete button to delete the selected rule 4 3 6 3 NAT Config NAT is abbreviated from Net Address Translation it s a protocol responsible for IP address translation In other word it is responsible for transforming IP and port of private network to public also is the IP address mapping which we usually say 54 Legal IP address u0 T e SUEI NAT Equipment Inner network DMZ config In order to make some intranet equipments support better service for extranet and make internal network security more effectively these equipments open to extranet need be separated from the other e
19. network please check if your network can work normally You can do this in one of two ways depending on how your workspace is set up Direct network connection by this method you need at least one available Ethernet port in your workspace Use the Ethernet cable in the package to connect WAN port on the back of your phone to the Ethernet port in your workspace Since this VoIP Phone has router functionality whether you have a broadband router or not you can make direct network connect The following two figures are for your reference A ss gt ADSL Cable Broadband Modem Router ADSL Cable gt a Modem Shared network connection Use this method if you have a single Ethernet port in your pe Intern ma workspace with your desktop computer already connected to it First disconnect the Ethernet cable from the computer and attach it to the WAN port on the back of your phone Next use the Ethernet cable in the package to connect LAN port on the back of your phone to your desktop computer Your IP Phone now shares a network connection with your computer The following figure is for your reference ADSL Cable Modem Step 2 Connect the handset to the handset port by the handset cable in the package Step 3 connect the power supply plug to the DC adapter port on the back of the phone Use the power cable to connect the power supply to a standard power outlet in your workspace Step 4 push the on o
20. 68 1 70 8023 RTP Initial Port Set the RTP Initial Port It is dynamic allocation RTP Port Quantity Set the maximum quantity of RTP Port the default is 200 Notice 1 You need save the configuration and reboot the phone after set this page 2 If you modify the port of Telnet and HTTP you would better set the value more than 1024 because the port value less than 1024 is system port reserved 3 if you set 0 for the HTTP port it will disable HTTP service 28 4 3 2 5 DHCP SERVER NETWORK TOO E Meer Mea DHCP SERVER Meme DHCP Leased Table DHCP Lease Table lan 192 168 10 1 192 168 10 30 1440 255 255 255 0 192 168 10 1 192 168 10 1 DHCP Lease Table Setting a ca RA Add DHCP Lease Table Delete DNS relay Setting DNS Relay DHCP SERVER DHCP Leased Table IP MAC mapping table If the LAN port of the phone connects to a device this table will show the IP and MAC address of this device lan 192 168 10 1 192 168 10 30 1440 255 255 255 0 192 168 10 1 192 168 10 1 Shows the DHCP Lease Table the unit of Lease time is Minute Lease Table Name Specify the name of the lease table Set the end IP address of the lease table the network device End IP connected to LAN port will get IP address between Start IP and End IP by DHCP Netmask Set the Netmask of the lease table Gateway Set the Gateway of the lease table Lease Time Set the Lease Time of the lease table DNS Set the default DNS server IP of the l
21. AN LAN 10 100Base T RJ 45 for PC Idle 2 0W Active 2 3W Relative Humidity 10 65 INFINEON MIPS 4Kc 150MHz DSP 100MHz 128Mbits 16Mbits Dimension L x Wx H 235x200x81mm Operation Temperature 0 40 C 5 1 2 Voice features Support SIP 2 0 RFC3261 and correlative RFCs Support IAX2 SIP supports 5 SIP servers Can connect to 5 SIP servers at the same time Codec G 711A u G 7231 high low G 729a b G 722 Echo cancellation G 168 Compliance in LEC additional acoustic echo cancellation AEC can reach 96ms max filter length in hands free mode Support Voice Gain Setting VAD CNG Full duplex hands free speakerphone NAT transverse support STUN client SIP support SIP domain SIP authentication none basic MD5 DNS name of server Peer to Peer IP call DTMF Relay support inband SIP info RFC2833 SIP application SIP Call forward transfer Calert blind attended hold waiting 3 way talking push to call paging and intercom click to dial telephone exchange sms pickup joincall redial unredial vport Call control features Flexible dial map hotline empty calling No reject service black list for reject authenticated call limit call no disturb caller ID Support phonebook 500 records Incoming calls outgoing calls missing calls Each supports 100 records Support voice record on SIP server Support voice record in this phone 20 minutes total 5 minutes max of 3 records or 15 records max 9 kind of ring types an
22. EBOOT Reboot Phone Press the Reboot button to reboot Phone If you modified some configurations which need the phone s reboot to be effective you need click the Reboot then the phone will reboot immediately Notice Before reboot you need confirm that you have saved all configurations 4 3 6 Security 4 3 6 1 MMI Filter SECURITY MMI FILTER ERNE BN E ro i MMI Filter Table 192 168 1 15 192 168 1 20 MMI Filter Table Set set a MMI Filter Table Set MMI Filter User could make some device own IP which is pre specified access to the MMI of the phone to config and manage the phone MMI Filter Table 192 168 1 15 192 168 1 20 MMI Fileter IP Table list MMI Filter Table Set Add or delete the IP address segments that access to the phone Set initial IP address in the Start IP column Set end IP address in the End IP column and click Add to add this IP segment You can also click Delete to delete the selected IP segment MMI Filter Select it or not to enable or disable MMI Filter Click Apply to make it effective 25 Notice Do not set your visiting IP outside the MMI filter range otherwise you can not logon through the web 4 3 6 2 Firewall SECURITY SRS eva NM Firewall Type C In_access Enable C Out_access Enable APPLY Firewall Input Rule Table Index Deny Permitprotocolsrc addr Srcmask Des Addr Firewall Output Rule Table Firewall Set rr m e read AN
23. Fanvil Corporate Headquarters Fanvil Technology Co Ltd Address Unit 4A Building NO 7 Tian An Industrial Park Nanshan District Shenzhen 518054 China Web Site www Fanvil com Tel 86 755 26502022 Fax 86 755 26505858 Manual Version V1 7 176 166 2005 Fanvil technology Co Ltd All rights reserved This document is supplied by Fanvil Technology Co Ltd No part of this document may be reproduced republished or retransmitted in any form or by any means whatsoever whether electronically or mechanically including but not limited to by way of photocopying recording information recording or through retrieval systems without the express written permission of Fanvil Technology Co Ltd Fanvil Technology Co Ltd reserves the right to revise this document and make changes at any time and without the obligation to notify any person and or entity of such revisions and or changes Product specifications contained in this document are subject to change without notice D Safety Notices Please read the following safety notices before installing or using this phone They are crucial for the safe and reliable operation of the device Please use the external power supply that is included in the package Other power supplies may cause damage to the phone affect the behavior or induce noise Oo Before using the external power supply in the package please check with home power voltage Inaccurate power voltage
24. N ID each other D e 4 Startup VLAN if set Voice Data VLAN differentiated as data untaged then the packet of the signal voice will use the Voice VLAN ID as the tag but the data packets will not take the VLAN tag 5 If Disable the VLAN regardless to set the Voice Data VLAN differentiated or not all packets will not take the VLAN tag If enable the DiffServ all packets will only take the DiffServ value 6 One must to notice enable the VLAN ID Check Enable that is default If enable it the phone will match the VLAN ID strictly When others VLAN ID dismatch with us the packets will discard Contrarily the phone will accept the packets with the distinct VLAN ID 7 You must gain the IP with the Static mode when you set VLAN otherwise can t gain the IP in the VLAN and also can not dial with point to point 4 3 2 4 Service Port You can set the port of telnet HTTP RTP by this page NETWORK SS EY ll oos Serivce PORT MRSS sure IA mwen RO SERVICE PORT Field name set web browse port the default is 80 port if you want to enhance HTTP Port system safety you d better change it into non 80 standard port Example The IP address is 192 168 1 70 and the port value is 8090 the accessing address is http 192 168 1 70 8090 Telnet Port Set Telnet Port the default is 23 You can change the value into others Example The IP address is 192 168 1 70 the telnet port value is 8023 the accessing address 1s telnet 192 1
25. apped The prefix number supports at most 30 digits Set Destination address This is optional config item If you want to Destination set peer to peer call please input destination IP address or domain name If you want to use this dial rule in SIP2 line you need input 255 255 255 255 or 0 0 0 2 in it Set the Signal port the default is 5060 for SIP Alias Set alias This is optional config item If you don t set Alias it will show no alias Note There are four types of aliases 1 add xxx it means that you need dial xxx in front of phone number which will reduce dialing number length 2 all xxx it means that xxx will replace some phone number 3 del It means that phone will delete the number with length appointed 38 4 Rep It means that phone will replace the number with length and number appointed You can refer to the following examples of different alias application to know more how to use different aliases and this dial rule Call Mode Select differenct signal protocol SIP or AX2 Suffix Set suffix this is optional config item It will show no suffix if you don t set it Delete Length Set delete length This is optional config item For example if the delete length is 3 the phone will delete the first 3 digits then send out the rest digits You can refer to examples of different alias application to know how to set delete length Introduction of how to set up dial peer to implement switch b
26. cccccesees 5 1 1 Thank you for your purchasing FV6030 ccssssssssccccccsssssssssssccccssssssssssscccoses 5 1 23 Delivery COn di anciana ccoo nadien 5 AA A O A 5 1 4 Port for COMMECUING oir anren ea a aaa a TE a ETEA Ea 7 2 Initial connecting and Setting AAA 8 2l Connect the li EREE AEA 8 2 2 Basie Initialization A A id 9 2 2 1 AMA A 9 IE VO030 s basic operatio A 12 DP ANSWER callsign tasessaneseisetussacssandanteesssasecsseecatsesessacessncareens 12 3 2 Y A ae a aa a a e ae E E ST 12 Dede End A O 13 3 4 Call transfer esasen eeaeee esaa aaeeea saaa aa aaa aaa saaa e aaa E aiaia 13 a Call RONG eii E E eacuieuavacseens 14 JO IF Way conference Call AAA EE 14 LS Wichboard Operator Teature ata 14 D C Al FCCOEGS 4 sos ctiecsassssecsessadesnantasecsausactcnausseassesscusuessesecdausscecesusseassedsesacunssesasdessscbcssasseos s 14 A DECANO CON atado 15 DAV Cal PICK WP incas 17 SAL FOUN CAM arnee AA E E 18 3 12 FEGIAU UNTO A 18 IA NO 18 Ae WED CON SUTURA A 19 4 1 Introduction OF configuration eesessssseceecccossssceccocosssssececosssssscecocssssssceecossssseceesosssss 19 4 1 1 Ways to COMU isa iia iia titi 19 4 1 2 Password Configuration e 19 A2 SCUINS Vid WED DEOWSER siiccscccasecaidcctceanassvecnusccedeuseeedecaceeceuauessstenmccecevesssereasacceceeaseeecees 19 AS Configuration via WEB cisisectccstsssccsshsccecadeaeccandscescassstavseccdeasssesiavesccceansccsibesseceseresecess 19 431 BASIC oo ii 20 SN O A O
27. d 2 user defined music rings Support DNS SRV Support Memo Support Multilanguage Phonebook supports vcard standard 12 24 hours time display Support daylight saving time y Support path gruu Support SRTP Support SIP Privacy 5 1 3 Network features WAN LAN support bridge and router model Support PPPoE for xDSL Support basic NAT and NAPT Support DHCP client on WAN Support DHCP server on LAN Support main DNS and secondary DNS server Support VLAN optional voice vlan data vlan Support DMZ Support DNS Relay SNTP Client Firewall Support VPN L2TP UDP TUNNEL QoS with DiffServ Network tools in telnet server including ping trace route telnet client 5 1 4 Maintenance and management Web telnet and keypad management Management with different account right Upgrade firmware through POST mode Upgrade firmware through HTTP FTP or TFTP Telnet remote management upload download setting file Safe mode provide reliability Support Auto Provisioning upgrade firmware or configuration file Support Syslog 5 1 5 Special features Support headset 5 programmable keys realizing memory keys or SIP line keys Support desk position and wall mountable Led to indicate missed call or voicemail Support 3 softkeys 5 2 Digit character map table Character 7PQRSpqrs Character 10 2ABCabe STUVtuv 3DEFdef 4GHlghi SJKLjkl 6MNOmno 62
28. d is ringing If callee answers the call you can begin to talk and your phone will keep showing callee s number and counting time Press ae to finish talk O Use directory press in stand by mode and then press Soft2 Enter you will access to phonebook 12 If there are many persons records stored in the directory you can use rr to search the person which you want to contact Press a S to forward and press gt to backward Press Soft2 Dial to dial the current number shown on the screen O Direct dial Direct dial means user can make calls directly without hook off or using handfree User can dial number in stand by mode and then press Soft2 Dial to call Use also can press Soft3 Save o save the number to directory In this way user can not use time out or fix length to collect digits and dial Oo Multi line calls FV6030 supports 5 SIP lines max that 1s user could use 5 SIP accounts to register and make calls User could use programmable key as SIP line key When a line key 1s pressed phone will use the server to call System will use SIP 1 as default line to call There are most two calls at the same time Screen will display the incoming call number when user is keep talking You can press the corresponding line key the led flash to indicate or Softl Answer to accept it and hold the first one Gf you want to use this function you need enable Call Waiting of the phone first Use Soft1 Switch to switch
29. deadliest e a a E doddabacensedes 23 A OE rotatoria E A also omnia 31 Hie A O O ee RPE enn A ere 40 A MAME 0 gt A er eee 47 TE A ne ee A E A 52 A A 58 4 4 Confiouration via Key Dad ssscccsssssssiaivcdeceasivsecscassaeriasivssecccccscusssiascecenscdanesassteesoussaeuseats 59 4 4 1 Keypad introduction cccccccnnnccnnnnnnnnnnnnoonncccnncnnnnnnnnnnnonononnnnnonnncncnnnnnnnnnnnnnnnnnnnananncnnnoos 59 HAZ MICA ECO doi cita ata dates datan 59 Ds DCN iii 61 e O 61 SN A IN 61 Ze VOCE ACA TUE iaa 61 LI NetWork Teatre tddi di ee 62 5 1 4 Maintenance and management ccccccccccccceccccasssessseeeeeeccccceeeeeeeaaaaassssseeeeeeeeeees 62 Li SPECIAL featur occ sass Phos A dais 62 5 2 Digit echaracter Map Cable wccsssiceeancececescacsecesscesccuxccsvacessdexcuuensaidscsudeeceencesneenseciwacenceanecs 62 1 Introducing FV6030 VoIP Phone 1 1 Thank you for your purchasing FV6030 Thank you for your purchasing FV6030 FV6030 is a full feature telephone that provides voice communication over the same data network that your computer uses This phone functions not only much like a traditional phone allowing to place and receive calls and enjoy other features that traditional phone has but also 1t own many data services features which you could not expect from a traditional telephone This guide will help you easily use the various features and services available on your phone 1 2 Delivery Content Please check wh
30. details In the idle mode press this key LCD will show call forward wait this indication disappear then can configure the forward phone no of SIP1 5 Press Soft2 ON then enabled call forward function and set it to always mode Press Softl OFF will close the function of forward Mute an active call to make the other side can not hear you Adjust headphones volume when hookoff or during the talking or adjust ring volume when there is call coming it can also be modified in the idle mode There are 4 kinds of functions configured through web Memory Key to store number for speed dial Line fucntion set dial up mode SIP1 SIP2 Dialpeer IAX2 3 KeyEvent function will expand the function key to special function key for example set to F_MWI then this key will to be voicemail key can check the voicemail information currently 4 DTMF function press this key will send out the preconcert number by DTMF when talking Port name attribute description LAN Network interface 10 100M Connect it to PC WAN Network interface 10 100M Connect it to Network DC 9V Power port SV 1A FV6030 is provided with two Ethernet cables and a power adaptor Phone has two interfaces WAN and LAN Please refer to safety notes of this manual carefully before power adaptor is connected 2 Initial connecting and Setting 2 1 connect the phone Step 1 Connect the IP Phone to the corporate IP telephony network Before you connect the phone to the
31. ease table Click the Add button to submit and add this lease table 29 DHCP Lease Table Delete Select name of lease table click the Delete button will delete the selected lease table from DHCP lease table Select DNS Relay the default 1s enable Click the Apply button to DNS Relay become effective Notice 1 The size of lease table can not be larger than the quantity of C network IP address We recommend you to use the default lease table and not modify it 2 If you modifies the DHCP lease table you need save the configuration and reboot 4 3 2 6 SN TP Setting time zone and SNTP Simple Network Time Protocol server according to your location you can also manually adjust date and time in this web page NETWORK AO E Mees il Ma SNTP SNTP Time Set IS a OO Time Zone GMT 08 00 Beijing Chongqing Hong Kong Urumqi m 12 Hours Systems A AA aes Timeset Time st minas 8 APPLY 30 Set SNTP Server IP address Time Zone Select the Time zone according to your location Time Out Set the time out the default is 60 seconds 12 Hours Systems Swich the time mechanism between 12 hours and 24 hours e oan SNTP Select the SNTP and click Apply to make the SNTP Times E em Enable Daylight Enable daylight saving time Time shift minutes Setup the variety length Setup stat and end month Setup start and end week Setup start and end day Setup start and end hours Setup s
32. ee Press to begin talking Press again to finish talk O Answer with headset Press SS to begin talking with the other part using headset Press SS again to finish talk O Using handfree instead of handset during a talk Press and hook on the handset when you use handset to speak and want to change to use handfree to speak Press again to finish talk O Using handset instead of handfree during a talk Hook off the handset when you want to use handfree to speak and want to change to use handset Just hook on to finish talk 3 2 Place calls O Use handset Hook off screen will show the current using line or you could use programmable key 1 to 5 to select after getting dialing tone you could begin to dial number After finishing it press and FV6030 will send the number and call the number When you hear a ringback tone and screen shows the callee s number it shows that the person you called is ringing If callee answers the call you can begin to talk and your phone will keep showing callee s number and counting time Just hang up to finish talk Oo Use handfree Press screen will show the currnet using line or you could use programmable key 1 to 5 to select after getting dialing tone you could begin to dial number After finishing it press and FV6030 will send the number and call the number When you hear a ringback tone and screen shows the callee s number it shows that the person you calle
33. er or technician of network 2 Pressing Coal and i twice screen shows 7 Advanced then pressing Soft2 Enter screen will show Enter Password 3 Input password default is 123 and pressing Soft2 Enter then pressing aia twice now screen shows 3 Network 4 Pressing Soft2 Enter then pressing RA sere shows 2 Static Set Pressing Soft2 Enter to make screen show 1 IP press Soft2 Enter and then press Soft2 Edit again and Soft1 Del to delete old parameter Input your IP address and press Soft2 Save After Saved shown screen will jump to show the IP information currently 5 Press ye to show 2 Netmask Press Soft2 Enter and press Soft2 Edit again and then use Soft1 Del to delete Input your Netmask and press Soft2 Save After Saved shown screen will jump to show the Netmask information currently 6 Press M show 3 Gateway Press Soft2 Enter and press Soft2 Edit again and then use Soft1 Del to delete Input your gateway and press Soft2 Save After Saved shown screen will jump to show the gateway information currentlly 7 Press a to show 4 DNS Press Soft2 Enter and press Soft2 Edit again and use Soft1 Del to delete Input your DNS server address and press Soft2 Save After Saved shown screen will jump to show DNS information 8 Press twice Soft3 Quit quitting With i pressed screen shows 1 Net Mode Press S
34. ether the delivery contains the following parts The base unit with display and keypad The handset The handset cable The power supply The Ethernet cable IP Phone are designed to look like conventional phones the following photo shows a broad overview of the IP Phone 1 3 Keypad E aa 141 uj t i b Key name menu Up down of navigation Left right of navigation Directory Soft1 Soft2 Soft3 Call records Exit Earphone redial Handfree network SIP accounts info hold transfer Function Description In idle state press the MENU key to call up the menu Use this key to choose item in the menu In the IDLE mode use this key to display net mode IP address and gateway s IP In the pick up mode use this key to choose line to call out In the keypad configure mode choose the item on the menu In the idle mode show SIP Phone number Access to phone book check the record list and add new records and revise the record When check the phone book record press this key again will return to idle mode group function keys include the functions such as SMS DND Memo make up down delete save quit edit redial and so on Check the Income Outgoing Missed calls records When check the calling records press this key again will return to idle mode During talking stop talking and other operation and return to talking it also can be used to stop ca
35. etween multi SIP lines enon ma fa a 9T mapping If you have registered a SIPI server and set dial peer according to the above table all calls will be sent via SIP1 server when you press the numeric key 9 in front of dialing destination phone numbers ST mapping If you have registered a Private SIP2 server and set dial peer according to the above table all calls will be sent via SIP2 server when you press the numeric key 8 in front of dialing destination phone numbers Corresponding other lines like SIP3 SIP4 SIP5 can set Destination as 0 0 0 3 0 0 0 4 0 0 0 5 the rule of 2T means user need to dial the number with prefix 2 if he want to dial via AX2 server Examples of different alias application Set by web explanation example You need set phone number If you dial 93333 Destination Alias and Delete the SIP2 server will 255 255 Length receive 3333 Phone number is XXXT Alias optional i Call Mode SIP v Destination is 255 255 255 255 niied This means any phone No that starts with your set phone number will be sent via SIP2 line after the first several digits of your dialed phone number are deleted according to delete length 39 canmode er 7 4 3 4 Phone 4 3 4 1 DSP Config This setting will realize speed dial function after you dialing the numeric key 2 the number after all will be sent out The phone will automatically send o
36. etween sending bye and hanging up after the phone transfers a call Click to Talk Set click to Talk need practical software support Signal Encode Enable Disable Signal Encrypt RTP Encode Enable Disable RTP Encrypt Enable Session Timer Set Enable Disable Session Timer whether support RFC4028 It will refresh the SIP sessions Answer With Single Codec Enable Disable the function when call is incoming phone replies SIP message with just one codec which phone supports Auto TCP Set to use automatically TCP protocol to guarantee usability of transport as message is above 1300 byte Enable Strict Proxy Strict Enable Strict Proxy Support the special SIP server when phone recieves the 34 patckets sent from server phone will use the source IP address not the address in via field Enable GRUU Set to support GRUU Enable Displayname Set to make quotation mark to displayname as the phone sends Quote out signal in order to be compatible with server 4 3 3 2 IAX2 Config VOIP E sre sxc sron f o roer Register staus fumregisteres Enable register JE Enable 6729 E Field name Phone Number Input your assigned phone number usually it is same you re your IAX2 account name Set your local sport the default is 4569 Voice Mail Number Specify the voice mail s number Voice Mail Text Specify the voice mail s name Set echo test number If I AX2 server supports echo test and echo test
37. ff switch on the back of the phone to the on side then the phone s LCD screen displays WAIT LOGON Later a ready screen typically displays the date time If your LCD screen displays different information from the above you need refer to the next 8 section Initial setting to set your network online mode If your VoIP phone registers into corporate IP telephony Server your phone is ready to use 2 2 Basic Initialization FV6030 is provided with a plenty of functions and parameters for configuration User needs some network and VoIP knowledge so that user could understand the meanings of parameters In order to make user use the phone more easily and convenient there are basic configurations introduced which is mandatory to ensure phone calls 2 2 1 Network settings Make sure that network is connected already before setting network of phone FV6030 uses DHCP to get WAN IP configurations So phone could access to network as long as there is DHCP server in it If there is no DHCP server available phone has to be changed WAN network setting to Static IP or PPPoE Setting PPPoE mode for ADSL connection 1 Get PPPoE account and password first 2 Pressing PP and pressing i twice screen shows 7 Advanced Now then pressing Soft2 Enter LCD screen will display Enter Password 3 Input password default is 123 and pressing Soft2 Enter then pressing gt twice now screen shows 3 Network
38. ialed If user makes the above configuration after user dials 11 digit numbers started with 13 the phone will send out O plus the dialed numbers automatically 2 Specifies a range that will match digit It may be a range a list of ranges separated by commas or a list of digits If user makes the above configuration after user dials 11 digit numbers started with from 135 to 139 the phone will send out O plus the dialed numbers automatically Use this phone you can realize dialing out via different lines without switch in web interface vie VOIP scm e MES DIAL PEER Dial Peer Table Number pestinaton Port mode alias Suffix Jpetrenon iss oz1ssa19 foso se fno anias fno sute o roo fowo fse frevoro fosu a iaaa Jooo foo se foaaso fno suti o 135 9000000 fo 0 00 5060 sP foao fro sute o Add Dial Peer Phone number Destination optional S Port optional liasCoptional canmode dse o O Sutfix optional Delete Length optional S O Dial Peer Option DIAL PEER There are two types of matching conditions one is full matching the other is prefix matching In the Full matching you need input your desired phone number in this blank and then you need dial the Phone number phone number to realize calling to what the phone number is mapped In the prefix matching you need input your desired prefix number and T then dial the prefix and a phone number to realize calling to what your prefix number is m
39. ime of an incoming call is 42 beyond its set value the phone will remind the caller to record Incoming Select it or not to Enable or disable Incoming Record Playing Record Playing Use Record Select it or not to Enable or disable Use Record Server Server Set Add Delete Black list If user does not want to answer some Black List phone calls add these phone numbers to the Black List and these calls will be rejected x and are wildcard x means matching any single digit for example 4xxx expresses any number with prefix 4 which length is 4 will be forbidden to dialed out DOT means matching any arbitrary number digit for example 6 expresses any number with prefix 6 will be forbidden to dialed out if user wants to allow a number or a series of number incoming he may add the number s to the list as the white list rule the configuration rule is number for example 123456 or 1234xx Black List 4119 Means any incoming number is forbidden except for 4119 Note End with DOT when set up the white list Set Add Delete Limit List Please input the prefix of those phone Limit List numbers which you forbid the phone to dial out For example 1f you want to forbid those phones of 001 as prefix to be dialed out you need input 001 in the blank of limit list and then you can not dial out any phone number whose prefix 1s 001 x and are wildcard x means matching any single digit for example 4xxx expresses any
40. ime of dialed call User can also use ha a to browse the dialed call records or press Soft2 Detail to check the details of this record then press Soft2 Dial again to change the current number Pressing Soft2 Dial will call this number directly if user don t modify the number If there is no dialed call screen will show List Is Empty User can also q to check Outgoing Call 3 9 Special function key O Function key If function key 1s set as SIP Line key user can select which lines will be used to make call when dialing or make a 2nd dialing by this function key Note that only the key which is registered is available to be select to call This function key can be configured as Key Event namely set as F_MWI It can set relative keys as Voice mail key can check new and old voice mail also can be set as F_DND F_FBOOK F_CFWD F_REDIAL F_CALLERS etc User can implement BLF PRESENCE MWI SPEED DIAL features by Memory Key b Busy Lamp Field Based on Asterisk it can be used to check the status Idle ring busy of the pointed phones It is helpful to operator to know the status of the phone which he will switch to User can configure the BLF like 300 is rogatory number 1 means SIPI of course user can configure as 2 SIP2 if don t use this simply says 300 b it will use SIP1 as default b means 15 use BLF feature When this configuration enable the phone will subscribe the status of pointed
41. ion Call Log explanation Display the start time of the outgoing record Display the conversation time of the outgoing record Display the account protocol line of the outgoing record Notice It will cover existing automatically if the call log table has the new record 4 3 1 4 MMI SET DD a BASIC AE Mr Maik MMI SET LANGUAGE SELECTION Greeting Message Set Greeting Message VOIP PHONE APPLY Version VOIP PHONE V1 7 176 166 Jun 16 2008 18 34 29 MMI SET Language Set Set the language of phone English is default The greeting message will display on lcd when phone is idle It can Greeting Message support 16 chars the default chars are VOIP PHONE 4 3 2 Network 4 3 2 1 WAN Config NETWORK WAN MENO MAA a eena A WAN Status Active IP 197 168 1 11 Current Netmask 233 233 233 0 192 168 1 1 MAC Address 00 09 45 a0 21 62 Get MAC Time 2008 05 16 WAN Setting pp 202 96 134 133 202 96 128 68 WAN Config Field Name ee WAN Status Active IP 192 168 1 11 Current Gateway 192 168 1 1 MAC Address 00 09 45 a0 21 62 Get MAC Time 2008 05 16 The current IP address of the phone Static Please select the proper network mode according to the network condition FV6030 provide three different network settings Oo Static If your ISP server provides you the static IP address please select this mode then finish Static Mode setting If you don t know about parameters of
42. ll In menu configuration mode press the key to return to stand by mode Note DO NOT press Esc during the configuration process because phone will not save the configuration modified and return to stand by status after pressing Esc Use earphone to receive and make a call when using earphone talking press this key will end this call In the hook off hands free earphone mode use redial to dial the last call number In the idle mode use up down key choose the called phone no on the calling record pick up press handfree key press earphone key will call out the current phone no Enter into hands free mode Show WAN IP gateway IP Check multi lines number server name server IP register status phone no in idle mode It could be used to enhance headphones s volume during talking Temporarily hold the active call during the talking press the key again might unhold the call please refer to 4 4 call hold for more details In idle mode press this key LCD will show Do Not Disturb then this phone is set to be No disturb mode press this key will also can cancel this function Press the key to can realize blind transfer and attended transfer when there have been a active call If there are two calls made press the key to transfer one call to the other side After transfer phone will be hanged up please refer to 4 3 call transfer for 6 lt mute SS volume Programmable key 1 4 Port for connecting more
43. may cause fire and damage Please do not damage the power cord If power cord or plug is impaired do not use it 1t may cause fire or electric shock O The plug socket combination must be accessible at all times because it serves as the main disconnecting device e Do not drop knock or shake it Rough handling can break internal circuit boards O Do not install the device in places where there is direct sunlight Also do not put the device on carpets or cushions It may cause fire or breakdown O Avoid exposure the phone to high temperature below 0 C or high humidity Avoid wetting the unit with any liquid Oo Do not attempt to open it Non expert handling of the device could damage it Consult your authorized dealer for help or else it may cause fire electric shock and breakdown O Do not use harsh chemicals cleaning solvents or strong detergents to clean it Wipe it with a soft cloth that has been slightly dampened in a mild soap and water solution O When lightning do not touch power plug or phone line it may cause an electric shock Oo Do not install this phone in an ill ventilated place O You are in a situation that could cause bodily injury Before you work on any equipment be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents Table of Content 1 Introducing FV6030 VoIP Phone ccccccccsessssssscccccccccccsssssccccccccccccsssssccc
44. nd DTMF 45 2 seconds after the phone call 1123 12344445 will make phone send DIMF 45 at 6 seconds interval e Phonebook prefix function At standby mode press phonebook button user can not only select his needed number to call out but also he can add prefix to numbers then call out It is convenient for user add prefix numbers that PBX need 3 10 call pickup Call pickup is implemented by simulating pickup function of PBX it s that when A calls B B rings but no answer at this moment C can hook off and input an appointed prefix plus B s number pick up A s call and talk with A The following chart shows how to configure an appointed prefix in dial peer to have call pick up function 17 1 means appointed prefix code After making the above configuration C can dial 1 plus B phone number to pick up A s call User can set prefix in random in the case of no affecting current dialing rules 3 11 join call When B is calling C A can join in the existing call by inputting an appointed prefix numbers plus B or C number if B or C also supports join call The following chart shows how to configure an appointed prefix in dialpeer to have join call function 2 means appointed prefix code After making the above configuration A can dial 2 plus B or C number to join B and C s call User can set prefix in random in the case of no affecting current dialing rules 3 12 redial unredial If B
45. nput the number you want to a transfer and press 3 8 Call records again to do the transfer FV6030 supports 100 items of missed call 100 items of incoming call and 100 items of dialed call If the records are full the newest will replace the oldest If phone s power cut or reboot call records will be discarded O Missed call rt af E Press Alia and screen displays Missed Call Press Soft2 Enter phone will show the number and time of missed call User can also use ay to browse the missed call records 14 or press Soft2 Detail to check the details of this record then press Soft2 Dial again to change the current number Pressing Soft2 Dial will call this number directly if user don t modify the number If there is no missed call screen will show List Is Empty O Incoming call zi FEN _ Press and switch the menu to Incoming Call by pressing er vy Press Soft2 Enter phone will show the number of incoming call User can also use ho Ai to browse the incoming call records or press Soft2 Detail to check the details of this record then press Soft2 Dial again to change the current number Pressing Soft2 Dial will call this number directly if user don t modify the number If there is no incoming call screen will show List Is Empty Oo Dialed call aa _ Pros and use Tr to select to Outgoing Call Press Soft2 Enter phone will show the number and t
46. number with prefix 4 which length is 4 will be forbidden to dialed out means matching any arbitrary number digit for example 6 expresses any number with prefix 6 will be forbidden to dialed out Notice Black List and Limit List can record at most10 items respectively 4 3 4 3 Digital Map Configuration This system supports 4 dial modes 1 End with dial your desired number and then press 2 Fixed Length the phone will intersect the number according to your specified length 3 Time Out After you stop dialing and waiting time out system will send the number collected 4 User defined you can customize digital map rules to make dialing more flexible It is realized by defining the prefix of phone number and number length of dialing In order to keep some users secondary dialing manner when dialing the external line with pbx phone can be added a special rule to realize it so user can dial a number as external line prefix and get the secondary dial tone to keep dial the external number after finishing dialing phone will 43 send the prefix and external number totaly to ther server for example there is a rule 9 xxxxxxxx in the digital map table after dialing 9 phone will send the secondary dial tone user may keep going dialing after finished phone will call the number which starts with 9 actually the number sent out is 9 digit with 9 PHONE sc MR DIGITAL MAP Md MAS Digital Map Set
47. oft2 Enter and press Soft2 Edit again and Es screen shows lt gt 5Static with Soft2 Save pressed screen shows Saved and then shows the net mode currently 9 Press Soft3 Quit four times to quit to stand by status Press gt to show Static If screen shows the IP address and gateway which are set just now it shows that Static IP mode is taken effect Setting DHCP mode 1 Press PP LN twice screen will show 7 Advanced Then press Soft2 Enter screen will show Enter Password 2 Input password default is 123 and press Soft2 Enter and press A then screen 10 displays 3 Network 3 Press Soft2 Enter to show 1 Net Mode After pressing Soft Enter and Soft2 Edit using Elia to select until screen shows lt gt DHCP Press Soft2 Save With saved displayed screen will jump to show the net mode currently 4 Press Soft3 Quit four times quitting to stand by status Press gt to show DHCP if there is Negotiating shown on screen 1t shows that phone 1s keep trying to search DHCP server or get IP If there 1s IP address displayed 1t shows that DHCP mode has been taken effect 11 3 FV6030 s basic operation 3 1 Answer calls FV6030 will ring to indicate you when there is call incoming below is ways to answer call O Answer with hook off Take handset you can talk directly You can just hang up to finish talk O Answer with handfr
48. orresponding right table O You can set shortcup key of pbook redial DND MWI call forward or callers by Key Event mode in function key type Select key event in function key type then fill FLPBOOK F_REDIAL F_DND F_MWI 46 F_CFWD or F_CALLERS in the corresponding right table For example Key Event v SIS 4 3 5 Maintenance 4 3 5 1 Auto Provision MAINTENANCE AUTO PROVISION Mae ea Meal Ml a Ma Auto Update Setting Auto Provision explanation Current Config Version Show the current config file s version Server Address Set FTP TFTP HTTP server IP address for auto update The address can be IP address or Domain name with subdirectory Username Set FTP server Username System will use anonymous 1f username keep blank Set FTP server Password Config File Name Set configuration file s name which need to update System will use MAC as config file name 1f config file name keep blank For example 000102030405 Config Encrypt Key Input the Encrypt Key if the configuration file is encrypted Protocol Type Select the Protocol type FTP TFTP or HTTP Update Interval Time Set update interval time unit is hour Different update modes 1 Disable means no update Update Mode 2 Update after reboot means update after reboot 3 Update at time interval means periodic update 4 3 5 2 Syslog Config Syslog is a protocol which is used to record the log messages with client server mechanism
49. phone each 60s LED off means Idled LED flash means ring and LED on means busy m MWI Message waiting indication means the number of this key is the number of voicemail Memory Key 30000 1 m User can configure MWI function according to the above chart 8000 is mailbox number 1 is using SIP1 user also can configure 2 SIP2 the rest lines can be deduced by analogy if no use is 8000 m it will pass the SIP1 line in default m means MIW function is using If there s new voicemail LED will blink and shows new message after receiving server will send current mail info to phone after receiving new MWI order LED will respond if LED light is off it means no new voicemail p Presence means phone can check the status of other phone that has relevant numbers Memory Key 5000 1 p User can configures presence function according to the above chart 500 is number that search caller 1 is using SIP1 user also can configure 2 SIP2 the rest lines can be deduced by analogy if no use is 500 p it will pass the SIP1 line in default p means presence function is using At this moment press this button it can show the correponding phone s status on off fail which LED don t remind f speed dial user configure it as same time as above attribute after configuring phone will implement above function in priority then considering to perform speed dial PUSH TO TALK user presses this button in standby the phone
50. quipments not open to extranet by the corresponding isolation method according to different demands We can provide the different security level protection in terms of the different resources by building a DMZ region which can provide the network level protection for the equipments environment reduce the risk which is caused by providing service to distrust customer and is the best position to put public information The following chart describes the network access control of DMZ lt Inner Network area 55 SECURITY Protocol Set IPSec ALG FTP ALG PPTP ALG APPLY NAT Table Inside IP Inside TCP Port Outside TCP Port Inside UDP Port Outside UDP Port A foen AN DMZ Config DMZ Table NAT Configuration explanation IPSec ALG It is an encryption technology Select 1t to enable IPSec ALG the default is enable FTP is a service of connection layer which can transform intranet IP FTP ALG into extranet IP when intranet IP is sending out packet Select it to enable FTP ALG the default is enable PPTP ALG Select it enable PPTP ALG the default is enable Shows the NAT TCP mapping table Shows the NAT UDP mapping table NAT Table Option CT a st part Transfer Type Select the NAT mapping protocol style TCP or UDP Inside IP Set the IP address of device which is connected to LAN interface to do NAT mapping Set the LAN port of the NAT mapping 56 Set the WAN port of the NAT mapping Notice After
51. rowser recommendatory way e Use telnet with CLI command 4 1 2 Password Configuration There are two levels to access to phone root level and general level User with root level can browse and set all configuration parameters while user with general level can set all configuration parameters except SIP 1 5 or IAX2 s that some parameters can not be changed such as server address and port User will has different access level with different username and password O Default user with general level username guest password guest O Default user with root level username admin password admin The default password of phone screen menu is 123 4 2 Setting via web browser When this phone and PC are connected to network enter the IP address of the wan port in this phone as the URL e g http xxx xxx xxx xxx or http Kxx xxx XXX XXX XXXX If you do not know the IP address you can look it up on the phone s display by pressing amend AE and Y button The login page is as below picture Logon gt lt After you configure the ip phone you need click save button in config under Maintenance in the left catalog to save your configuration Otherwise the phone will lose your modification after power off and on 4 3 Configuration via WEB 19 4 3 1 BASIC 4 3 1 1 Status BASIC sTaTus RA MESSER ES II WANN hp Address raz n Gateway hoziri Phone Number SIP LINE 1 5060 Unapplied
52. rrent VPN IP address VEN Mode 2 UDP Tunnel O L2TP C Enable VPN Select UDP Tunnel VPN Tunnel or VPN L2TP You can choose only one for current state After you select it you d better save configuration and reboot your phone Enable VPN Select it or not to enable or disable VPN UDP Tunnel YPN Server Addr 0 0 0 0 YPN Server Port Eo Server Group ID VPN Server Area Code 12345 VPN Server Addr Set VPN Server IP Address VPN Server Port Set VPN Server Port ETE YPN Server Addr 22020022225 Oe YPN User Name VPN Server Addr Set VPN L2TP Server IP address VPN User Name Set User Name access to VPN L2TP Server VPN Password Set Password access to VPN L2TP Server 4 3 7 Logout 58 System Logout Press the Logout button to Logout Phone Click Logout and you will exit web page If you want to enter it next time you need input user name and password again 4 4 Configuration via Keypad 4 4 1 Keypad introduction User can do brose modify or cancel via screen menu by using i VEE and Soft1 Soft2 Soft3 o Use ba whai and Softl to select the sub menu o Use BG to adjust screen brightness and contrast ring volume and voice volume Use Soft2 and Soft3 to enter modify or exit cancel 4 4 2 Menu Tree Menu Tree List 59 5 Appendix 5 1 Specification 5 1 1 Hardware Adapter Input 100 240V Input Output Output 5V 1A or PoE 802 3af optional port 10 100Base T_RJ 45 for L
53. tart and end minutes Notice You need specify the above all items 4 3 3 VOIP 4 3 3 1 SIP Config Set your SIP server in the following interface 31 VOIP sip Bath Mr gt SIP Line Select ry Server adress OOOO werna O O ows otf Advanced SIP Setting Register Expire Time hot Lime number ea Tal Enable Keep Authentication Signal Eee O o NaTKeepave JO et ede o Enable via mort female session Timer O Enable prac O answer With Single Codes Long Comtat er A Enable urt Conver A elena O pial without Resister fee RU Ban Anonymous can erable Dispiayname Quote Enable ons sev O eme ases SIP Config SIP Line Select Choose line to set info about SIP there are 5 lines to choose You can switch by Load button Register Status Shows 1f the phone has been registered the SIP server or not or so show Unapplied Server Name Set the server name 539 Server Port Set your SIP server port Account Name Input your SIP register account name Phone Number Input the phone number assigned by your VoIP service provider EE Phone will not register if there is no phone number configured Set proxy server IP address Usually Register SIP Server configuration is the same as Proxy SIP Server But if your VoIP Proxy Server Address service provider give different configurations between Register SIP Server and Proxy SIP Server you need make different settings Proxy Server Port Set your Prox
54. ted to you Input the Gateway address distributed to you DNS Domain Set DNS domain postfix When the domain which you input can not be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Alter DNS Input your standby DNS server address SIMPLE SIP SET Display Name Server Address 2113 Enable Register Start to register or not by selecting 1t or not 21 Connect Mode Static Static IP Address 197 168 1 179 Gateway 192 168 1 1 Register Server 192 168 1 2 Account User Name 2113 PhoneNumber 2113 Register Display detailed information that you manual config Choose DHCP MODE click NEXT Jcan config SIP default SIP1 simply also can browse too Click BACK can return to the last page Like Static IP MODE Choose PPPoE MODE click NEXT can config the PPPoE account password and SIP default SIP1 simply also can browse too Click BACK can return to the last page Like Static IP MODE PPPOE Set PPPOE Server ANY PPPoE Server It will be provided by ISP Input your ADSL account Password Input your ADSL password Notice Click Finish button after finished your setting IP Phone will save the setting automatically and reboot After reboot you can dial by the SIP account 4 3 1 3 Call Log You can query all the outgoing through this page BASIC Ml srarus Be cali coc B Call informat
55. the two calls to talk User can also use Softl Conf to make the second call when there is just an active call 3 3 End calls O Hang up with handset hook on Hook on to finish talking O Hang up with handfree Press to finish talk when phone is in handfree status Note user can not finish talk by pressing if phone is used handset to talk O Hang up with headset Press SS to finish talk when the phone is using headset communication O Hang up a active call with 2 calls When there are two calls user might use Softl Switch to switch to the call you want to hang up first Then press to finish talk and phone will switch to the other call automatically Note itis no use to press to finish talk if there is only one current call 3 4 Call transfer e Blind Transfer During talk press ae 7 and then dial the number that you want to transfer to and press Phone will transfer the current call to the third party After finishing transfer the call you talk to will be hanged up User can not select SIP line when phone transfers call 13 e Attended Transfer During talk press and input the number that you want to transfer to and press Soft2 Send After that third party answers then press ae complete the transfer You need enable call waiting and call transfer first If there are two calls you can just talk to one and keep hold to the other one The one who 1s keep hold can not speak to you or hear from you
56. tting you can save all changes of configurations Click the Save button Save Config all changes of configuration will be saved and be effective immediately Backup Config Right clicks on Right click here and select Save Target As then you will save the config file in txt format user can restore factory default configuration and reboot the phone If you login as Admin the phone will reset all configurations and Clear Config restore factory default 1f you login as Guest the phone will reset all configurations except for VoIP accounts SIP1 5 and IAX2 and version number 4 3 5 4 Update You can update your configuration with your config file in this web page MAINTENANCE E cr Merit UPDATE Mr Museen 2 2 22 Web Update Select file MI 2 bet au _Update FIP Update password File Name a aa ype Application update Protocol FIP 49 Field name explanation Click the browse button find out the config file saved before or Web Update provided by manufacturer download it to the phone directly press Update to save You can also update downloaded update file logo picture ring mmiset file by web Server Set the FTP TFTP server address for download upload The address a File name Set the name of update file or config file The default name is the eine ahs NOON Notice You can modify the exported config file And you can also download config file which incl
57. udes several modules that need to be imported For example you can download a config file just keep with SIP module After reboot other modules of system still use previous setting and are not lost Action type that system want to execute 1 Application update download system update file 2 Config file export Upload the config file to FTP TFTP server name and save it 3 Config fie import Download the config file to phone from FTP TFTP server The configuration will be effective after the phone is reset Select FTP TFTP server 4 3 5 5 Account Config You can add or delete user account and change the authority of each user account in this web page 50 MAINTENANCE Po Mac Mee al Meso arm ACCOUNT Museen Set Keyboard Password User Set Add User Account Option Account Configuration Keyboard Password Set the password for entering the setting menu of the phone by the phone s key board The password is digit m e This table shows the current user existed User Name Set account user name User Level Set user level Root user has the right to modify configuration General can only read Password Set the password Confirm the password Select the account and click the Modify to modify the selected account and click the Delete to delete the selected account General user only can add the user whose level is General 4 3 5 6 Reboot e MAINTENANCE PASEA Ec Mes sem Mle wis e R
58. ut alias number adding your dialed number if your dialed number starts with your set phone number You need set Phone Number Alias and Delete Length Phone number is XXXT and Alias is Rep xxx If your dialed phone number starts with your set phone number the first digits same as your set phone number will be replaced by the alias number specified and New phone number will be send out If your dialed phone number starts with your set phone number The phone will send out your dialed phone number adding suffix number When you dial 2 the SIP1 server will receive 33334444 When you dial 8309 the SIPI server will receive 07558309 When you dial 0106228 the SIP1 server will receive 86106228 When you dial 147 the SIP1 server will receive 1470011 In this page you can configure voice codec input output volume and so on 40 PHONE DSP MAME MAA MS MAS First Codec o711uiawea fault Ring Tye er MAD DSP Configuration Field name First Codec The fist preferential DSP codec G 711A u G 722 G723 G729 Second Codec The second preferential DSP codec G 711A u G 722 G 723 G729 Handdown Time Specify the least reflection time of Handdown the default is 200ms VAD Select it or not to enable or disable VAD If enable VAD G729 Payload length could not be set over 20ms 4 3 4 2 Call Service In this web page you can configure Hotline Call
59. will release the mapping and the system need send a STUN packet to keep the mapping effective and alive Local SIP Port Set the SIP port Choose line to set info about SIP There are 5 lines to choose You can switch by Load button Enable Disable SIP STUN Notice SIP STUN is used to realize SIP penetration to NAT If your phone configures STUN Server IP and Port default is 3478 and enable SIP Stun you can use the ordinary SIP Server to realize penetration to NAT 4 3 3 4 DIAL PEER setting This functionality offers you more flexible dial rule you can refer to the following content to know how to use this dial rule When you want to dial an IP address the entry of IP addresses is very cumbersome but by this functionality you can set number 156 to replace 192 168 1 119 here When you want to dial a long distance call to Beijing you need dial an area code 010 before local phone number but you can also dial number 1 instead of 010 after we make a setting according to this dial rule For example you want to dial 01062213123 but you need dial only 162213123 to realize your long distance call after you make this setting 1T i 1 5060 SIP rep 010 no suffix To save the memory and avoid abundant input of user add the follow fuctions umber Destination pot Mode Alias Suffix peltengtn aao loo 60 SIP fado fno suts fo 13 5 hmomeax Jooo soso sip faaa o no sute fo 1 x Match any single digit that is d
60. works ID for example system will change LAN IP from 192 168 10 1 to 192 168 11 1 when system uses DHCP client to get IP in startup if system uses DHCP client to get IP in running status and network ID is also same as LAN s system will refuse to accept the IP to configure WAN So WAN s active IP will be 0 0 0 0 4 3 2 2 LAN Config NETWORK P an RR EE EE EG LAN Setting 192 168 10 1 1255 255 255 0 Field name Netmask Select the DHCP server of LAN port or not After you modify the DHCP Service LAN IP address phone will amend and adjust the DHCP Lease Table and save the result amended automatically according to the IP address and Netmask You need restart the phone and the DHCP server setting will take effect Select Bridge Mode or not If you select Bridge Mode the phone Bridge Mode will no longer set IP address for LAN physical port LAN and WAN will join in the same network Click Apply the phone will reboot Notice If you choose the bridge mode the LAN configuration will be disabled 4 3 2 3 Qos Config The VOIP phone support 802 1Q P protocol and DiffServ configuration VLAN functionality can use different VLAN IDs by setting signal voice VLAN and data VLAN The VLAN application of this phone is very flexible a Do not use YLAN After Switchboard recelved the Broadcast Frame transmit to every other port except the send port Switchboard Broadcast Frame Lise VLAN
61. y SIP server port Input your Proxy SIP server account Proxy Password Input your Proxy SIP server password Set the sip domain if needed otherwise this VoIP phone will use Domain Realm the Register server address as sip domain automatically Usually it is same with registered server and proxy server IP address Set expire time of SIP server register default is 60 seconds If the Register Expire Time register time of the server requested is longer or shorter than the expire time set the phone will change automatically the time into the time recommended by the server and register again Setsipportofeachine SSS Local port Set sip port of each line Ring type Set ring type of each line Subscribe Expire Time Overtime of resending subscribe packet Suggest to use the default config Hot line Number Set hot line number of each line Enable Keep Enable Disable Keep Authentication System will take the last Authentication authentication field which is passed the authentication by server to the request packet It will decrease the server s repeat authorization work if it is enable Enable Disable keeps NAT of SIP alive NAT Keep Alive If some server refuse to register with too short interval time and has no packets sending to device in private network to keep NAT alive user could set this function ON It need set the keep alive interval time less than the NAT server s Enable Via rport Enable Disable system to support RFC3581

User Manual FV6030 VoIP Phone

Contents

Download Pdf Manuals

Related Search

Related Contents