User's Manual
Contents
1. iron flashes means the battery voltage is too low and the output will be cut off until the battery voltage raise to 12 6V Iron on means output is good TROUBLE SHOOTING Situation Probable cause Solution Charge icon not on Solar panel opened Reconnect when sunny Load icon off TECHNICAL PARAMETER woo sou wow prow sro moe i m e Fu ae sx iw m4 cR S ron xn D EI VOSA all red color voltage X2 X4 while using 24V 48V system Product specifications are subject to change without prior notice2. User s Manual SAFETY INSTRUCTIONS 1 Make sure your battery has enough voltage for the controller to recognize the battery type before first installation 2 Tha battery cable should be as short as possible to minimize loss 3 The regulator is only suitable for lead acid batteries OPEN AGM GEL it is not suited for nickel metal hydride lithium ions or other batteries 4 Tha charge regulator is only suitable for regulating solar modules Never connect another charging source to the charge regulator PRODUCT FEATURES 1 Bulid in industrial micro controller 2 Big LCD diepiay with SV USB charger 3 PWM charge management 4 Build in short circult protection open circuit protection reverse protection over load protection 5 Dual mosfet Reverse current protection low heat production SYSTEM CONNECTION 1 Connect the battery to the charge reguiator plus and minus 2 Connect the photovoltaic module to the regulator plus and minus 3 Connect the consumer to the charge regulator pius and minus The reverse order applies when deinstalling An improper sequence order can damage the controller ofo ome oye Me 900000 USB charger a ey voltage digital display es solar panet charge on equalation b r heraus mn EN gutput battery ic3 u This iron will be on when solar panel voltage is higher than battery voltage and it will start charging Battery power iron If this
Download Pdf Manuals
Related Search