Binatone CAPRICE 600 User's Manual
Contents
1. Low volume To make a 1 call Lift the handset or press SPEAKERPHONE button on the Base unit gt Check for dial tone 2 123 Dial the telephone number 436 The display shows the duration of the call in 0 minutes and seconds Using the Pre dial mode 1 123 Dial the telephone number 456 789 O 2 Lift the Handset or press SPEAKERPHONE button on the Base unit to dial out the number Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 11 Telephone operation continue To answer a call To adjust the speakerphone volume To end a call To switch between the Handset and the Speakerphone To mute the mouthpiece or microphone MUTE When the phone rings Lift the handset or press SPEAKERPHONE button on the Base unit gt The display shows the duration of the call in minutes and seconds During a call Adjust the volume of the speakerphone to your comfortable volume level using the SPEAKERPHONE volume switch located at the right side of the Base unit Replace the Handset on the Base unit cradle or press SPEAKERPHONE button on the Base unit gt The SPEAKERPHONE light indicator will turn OFF During a phone conversation through the Handset press the SPEAKERPHONE button to speak hands free Replace the Handset on the Base unit cradle While in speakerphone mode lift the Handset to enable a private conversation During a call the phone mutes the m2. Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 33 Connection and conditions for use You can connect your Caprice 600 to a direct exchange line DEL a line connected to a local exchange with its own phone number to an extension socket connected to a DEL or to an extension on an approved compatible PBX Do not connect the Caprice 600 as an extension to a payphone The ringer equivalence numbers RENs of all instruments phones fax machines etc connected to an exchange line must not add up to more than 4 otherwise one or more of them may not ring and or answer calls correctly The Caprice 600 has a REN of 1 and most other telephones have a REN of 1 unless marked otherwise Contents of this User Guide Where to find it Installation Desk Wall mount installation Setting up the Caprice 600 Telephone operation Outgoing call record Phonebook If you need help The Binatone Help Line is available from 9 00 am to Galles Bignay operaion 5 00 pm Monday to Friday on 9 Answering Machine system 0845 345 9677 10 Remote operation Calls are charged at Local Call 11 Operational notes rate 12 Troubleshooting 13 Guarantee and service 14 Technical details A O OT e Oa Pressing buttons on your phone m When the instructions in this user guide tell you simply to press a button this means that you should press the button briefly then release it m When the instructions t
3. CDS Press UP or DOWN button to set the year Press MENU button to confirm gt The month icon will be blinking Press UP or DOWN button to set the month Press MENU button to confirm gt The date icon will be blinking Press UP or DOWN button to set the date Press MENU button to confirm gt The hour icon will be blinking Press UP or DOWN button to set the hour gt When setting the hour the AM or PM icon will automatically turn ON to correspond the hour time Press MENU button to confirm gt The minute icon will be blinking Press UP or DOWN button to set the minute Press MENU button to confirm the TIME and DATE setting Continue with programming or press EXIT button to return to standby mode Press MENU button gt The display shows OPTIONS MENU AV Press UP or DOWN button until the display shows SET FLASH TIME Press MENU button to confirm Press UP or DOWN button to select 100MS default 300MS or 600MS Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 8 Setting up continue 5 LCD 1 CONTRAST MESSAGE LENGTH MENU Press MENU button to confirm Continue with programming or press EXIT button to return to standby mode Press MENU button gt The display shows OPTIONS MENU AV Press UP or DOWN button until the display shows LCD CONTRAST Press MENU button to confirm Press UP or DOWN button to sele
4. ofan vZze on OFPe Space 15 Phonebook continue 7 8 To make a 1 call from the Phonebook 2 To edit a 1 stored number and or name 2 3 4 5 6 7 BOOK EXIT Om CDS DIAL CDS BOOK CDS BOOK CDS BOOK EXIT Press BOOK button to confirm Press EXIT button repeatedly to return to standby mode or wait until the program times out When viewing the Phonebook records press UP or DOWN button to find the record you wish to call Press DIAL button The phone automatically dials the displayed record gt The Caprice 600 dials the number using the speakerphone mode Lift the Handset anytime to talk privately and to turn the speakerphone mode off When viewing the Phonebook records press UP or DOWN button to find the record you wish to edit When the record is displayed press BOOK button gt The display shows the cursor blinking on the first digit of the telephone number Press UP or DOWN button to move the cursor to the digit you wish to change then input the new one or press ERASE button to delete Press BOOK button to confirm gt The display shows the cursor blinking on the first character of the name Press UP or DOWN button to move the cursor to the character you wish to change then input the new one or press ERASE button to delete Press BOOK button to save the edited record Press EXIT button repeatedly to return to standby mode or wait until the pro
5. OFF button Volume Control Use the SPEAKERPHONE volume switch located on the right side of the Base unit to adjust the volume of the loudspeaker during playback If you hear the answering machine recording a message you can intercept the call and speak to the caller EITHER by Lifting the Handset or Pressing the SPEAKERPHONE button on the Base unit or lifting the Handset of any other phone connected to the same line When you have intercepted the call the machine will stop recording the caller s message If you intercept a call within 3 seconds of its start you may sometimes need to press EXIT ON OFF button to stop recording To delete the current incoming message During message playback press ERASE button gt The display prompts DELETEP Press ERASE button again to confirm gt After the erasure is complete the numeric order of the remaining messages will be rearranged Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 24 Answering Machine System continue To delete all 1 trase After playing back all of your messages press messages and hold ERASE button gt The display prompts DELETE ALL 2 DA Press ERASE button again to confirm you will hear All messages erased gt The machine will not delete any messages that you haven t yet listened to 3 The display automatically returns to standby mode To go back to If you no longer want callers to hear the
6. OGMs the default that you have recorded you can delete OGM them and revert to the pre recorded defaults as follows 1 ExT Make sure the machine is switched on om If necessary press and release the EXIT ON OFF button to switch to the OGM you want to delete 2 OSM Press the OGM REWIND button to play the O current announcement 3 RASE While the announcement is playing press ERASE button gt The machine plays the pre recorded OGM Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 25 10 Remote operation To check 1 your REMOTE 2 ACCESS code 3 4 To check 1 your messages from a 2 remote 3 location a Zz Q CDS D m Zz m x Q iS a You can use the Answering System features of Caprice 600 when you are away from home To protect your privacy most of the features can be used only after you enter the three digit REMOTE ACCESS Code In standby mode press MENU button Press UP or DOWN button until the display shows REMOTE ACCESS Press MENU button to display your code setting gt The default code is 321 Press EXIT button to return to standby mode Using a tone dialing phone dial your home phone number Listen to or bypass the OGM Enter your REMOTE ACCESS Code Press keypad 2 to playback your messages gt For other instructions see the Remote Intruction code menu shown on the next page Notes During
7. phone will automatically return to the standby display Otherwise the first alphanumeric Phonebook entry will be shown Press NUMERIC key 2 aBc 9 wxyz button that corresponds to the first letter of a Caller s 14 Phonebook continue To add a new record into the Phonebook 5 6 N CDS EXIT Om o Q x Q a g a o Q x Q tN Ro OOuUNn HOW g Q fe tal name and the search will jump to the first entry in the Phonebook beginning with that letter Press UP or DOWN button to scroll through the other records Press EXIT button repeatedly to return to standby mode or wait until the program times out Press BOOK button gt The display shows SEARCH ADD with the SEARCH option blinking Press UP or DOWN button to select ADD Press BOOK button to confirm gt The display shows the cursor blinking on the number field Input the telephone number maximum of 24 digits Press BOOK button to confirm the number gt The display shows the cursor blinking on the name field Input the name maximum of 15 characters using keypad buttons 2 ABC to 9 WXYZ gt Refer to the table below to get the following characters Telephone Keypad characters Keypad 1st 2nd 3rd 4th 5th Buttons Press Press Press Press Press 1 2 asc 3 oer A cui 5 6 mno 7 Pars 8 tuv 9 wxvz 0 lt cCoOZAIMB lt lt WDOr 719 NOMONOAUOAWHD
8. remote operation you must press a key within 10 seconds otherwise the machine will cut off your call E f the machine pauses during playback press keypad 2 within 10 seconds to continue Otherwise the machine will cut off your call E During remote playback when the machine stops automatically after 168 seconds about 23 4 minutes a key must be pressed within 10 seconds or the machine will cut you off Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 26 Remote operation continue Using the remote instruction code Switching ON from a remote location 1 2 3 4 The following is the Remote Instruction Code Help Menu To bypass the Outgoing Message press To play new messages press 2 gt After playing back new messages press 2 again to play all recorded messages gt To pause and restart during message playback press 2 To repeat message press 1 gt To skip back to the previous message press 1 twice To skip message press 3 To play announcement press 4 To record greeting press 5 To stop function press 6 To delete message press 7 To set Answer OFF press 8 To set Answer ON press 9 gt After setting to Answer ON press 9 to switch between OGM1 and OGM2 To delete all messages press O twice If the answering machine is switched off it will answer your call af
9. seconds and then switch back on This may solve the problem Make sure you re using the telephone line cable that was supplied with your Caprice 600 Other telephone line cables might not work Set the ringer volume to High using the switch at the back of the unit Check that the total REN value of all equipment connected to your telephone line is not more than 4 Disconnect one or more telephones Make sure you re using the telephone line cable that was supplied with your Caprice 600 Other telephone line cables might not work You need to subscribe to Caller Display service from your local telephone company Contact the local telephone company for details on how to subscribe Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 29 Troubleshooting continue The machine won t record any messages Remote operation doesn t work Last Number Redial and or memory dialing don t work on a PBX The caller may have withheld their number by dialing 141 Or they may be calling from a network that does not transmit the Caller Display for example it may be an international call Be sure to wait until the second ring before answering Answering Machine The machine s memory may be full You need to delete enough recorded messages to free at least one minute recording time Or you can delete all recorded messages to make room for new ones ake sure the machine
10. CORDED TELEPHONE WITH CALLER CAPRICE 60 DISPLAY AND ANSWERING MACHINE Unpacking your CAPRICE 600 In the box are j Base Unit f Pran Handset j ae Coiled Handset cord f Se i ae Mains power adaptor ES E fy for Base Unit n s E Telephone line cord for A 1 a Base Unit Mount Bracket 2 Screws for wall mounting User manual Keep the packaging materials K 7 7 p in a safe place in case you later a need to transport the unit n Keep your sales till receipt If you need help which is your guarantee The Binatone Help Line is available from 9 00 am to 5 00 pm Monday to Friday on a 0845 345 9677 Binatone Calls are charged at Local Call rate Important note emergency calls If you ever need to make an emergency call during a mains power failure you ll need to lift the Handset the speakerphone will not work without mains power 1 Where to find it DIAL Button Press to 4 OGM 44 REWIND dial out the displayed Button Press and record hold to record your outgoing messages Press during message playback to repeat the current message or to go back to the previous message s NEW CALL light Flashes when you have new Caller Display records BOOK PHONEBOOK Button Press to access the Phonebook records MENU Button Press to enter Options Menu to set the Date Time Screen Contrast and other phone TAM settings EXIT ANSWER ON OFF Button
11. Press to stop recording or playback Press and hold to switch the answering machine ON or OFF With TAM ON in standby mode press to select MESSAGE light Turns ON when the TAM is on Flashes when you have new TAM messages Turns ON when using the speakerphone MUTE Button Press during a call to mute the microphone or mouthpiece UP DOWN CDS Buttons Scrolls through the Caller Display records and scrolls through the lists and options REDIAL PAUSE Button Press to access the LNR lists when in standby mode Press to insert a pause when dialing SPEAKERPHONE Button Press to make answer or end a call using the speakerphone Important OGM1 or OGM2 MEMO gt gt SKIP Button Press and hold to record a memo Press during message playback to skip to the next 3 message PLAY PAUSE Button Press to play back messages and memos Press to pause playing of a memo or message SPEAKER Volume switch Used to adjust the volume level of the Speakerphone ERASE Button Press to delete individual messages memos stored numbers or Caller Display records RECALL Button You may need this function if your phone is connected to a PBX or if you use BT s Selected Services When the instruction simply say press a button this means you should press it briefly then release it When the instruction say press and hold a button th
12. are no new messages the phone will answer after the 4th ring You can then hang up after the 3rd ring to avoid paying for the call Press MENU button to confirm Continue with programming or press EXIT button to return to standby mode The REMOTE ACCESS is a three digit code you need if you call away from home to check your messages The default is 321 You can change it to any three digits you want Press MENU button gt The display shows OPTIONS MENU AV Press UP or DOWN button until the display shows REMOTE ACCESS Press MENU button to confirm gt The first digit of the code will be blinking Press UP or DOWN button to set the first digit of the REMOTE ACCESS code Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 10 Setting up continue 5 MNU Press MENU button to confirm gt The second digit of the code will be blinking CDS 6 Press UP or DOWN button to set the second digit of the REMOTE ACCESS code 7 AY Press MENU button to confirm gt The third digit of the code will be blinking CDS 8 Press UP or DOWN button to set the third digit of the REMOTE ACCESS code 9 O Press MENU button to confirm the REMOTE ACCESS setting EXIT 10 Ou Press EXIT button to return to standby mode 5 Telephone Operation Ringer volume The Ringer High Low switch located at the back of the Base unit allows you to adjust the volume of the ringer High volume gt pi PR PE
13. are using a two way socket adapter remove it and plug a telephone directly into the socket If the call now works the adapter may be faulty If you cannot make a call the fault may be on the exchange line Contact the service provider the BT engineers on 151 or your cable company If you still cannot identify the cause of the problem contact the Binatone Help Line on 0845 345 9677 Calls are charged at Local Call rate Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 31 13 Guarantee and service The Binatone Caprice 600 is guaranteed for 12 months from the date of purchase shown on your sales receipt The Guarantee does not cover damage by misuse or negligence or by excessive voltages for example faults on the telephone line or lightning This does not affect your statutory rights Please keep your sales till receipt this is your guarantee You should also keep the original packaging material In the unlikely event that you need to return your Caprice 600 to our Repair Centre while it is under guarantee there will be a 5 handling charge While the unit is under Guarantee 1 Disconnect the Base unit from the telephone line and the mains electricity supply 2 Pack up all parts of your Caprice 600 using the original packaging Remember to include the mains adapter 3 Return the unit to the shop where you bought it making sure you take your sales receipt After the Guarantee has exp
14. ct your comfortable display viewing level 1 5 The default setting is 3 Press MENU button to confirm Continue with programming or press EXIT button to return to standby mode To set the recording time for ICM and memo messages of the Answering machine Press MENU button gt The display shows OPTIONS MENU AV Press UP or DOWN button until the display shows MESSAGE LENGTH Press MENU button to confirm Press UP or DOWN button to select 1 2 3 or 4 minutes The default setting is 2 minutes Press MENU button to confirm the MESSAGE LENGTH setting Continue with programming or press EXIT button to return to standby mode Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 9 Setting up continue RINGS TO ANSWER REMOTE ACCESS 4 z nm Z Q CDS D nm E G D O MENU EXIT Om MENU CDS To set the number of rings before the machine answers a call Press MENU button gt The display shows OPTIONS MENU AV Press UP or DOWN button until the display shows RINGS TO ANSWER Press MENU button to confirm Press UP or DOWN button to select TOLL SAVER 2 3 4 5 6 7 8 or 9 rings The default setting is 6 gt Use TOLL SAVER when checking your Caprice 600 for messages from a remote location using long distance service or from a pay phone The Answering machine responds after the 2nd ring only if you have a new message waiting If there
15. e arranged to fit in the parking recess under the earpiece on the Handset 6 4 Setting up the Caprice 600 SET LANGUAGE SETTIME 1 DATE 3 CDS MENU The following section details how to set up your telephone Press the MENU button to enter the Options menu and then use the UP or DOWN buttons to cycle through the following options m SET LANGUAGE m SET TIME DATE m SET FLASH TIME m LCD CONTRAST m MESSAGE LENGTH m RINGS TO ANSWER m REMOTE ACCESS m EXIT OPTION Note The system will time out if you leave more than 15 seconds between key presses With the phone in standby mode Press MENU button gt The display shows OPTIONS MENU AV Press UP button to go to the language setting gt The display shows SET LANGUAGE Press MENU button to confirm Press UP or DOWN button to select ENGLISH default FRANCAIS or ESPANOL Press MENU button to confirm Continue with programming or press EXIT button to return to standby mode Press MENU button gt The display shows OPTIONS MENU AY Press UP or DOWN button until the display shows SET TIME DATE Press MENU button to confirm gt The year icon will be blinking Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 7 Setting up continue 4 10 11 12 13 14 SET FLASH 1 TIME 2 3 4 O O CDS M o a z S 0 a z z M O a a S Q a g a D a z z
16. ell you to press and hold a button this means you should keep the button pressed until the display changes and or you hear a tone UK BTP Ver 2 June 06 34
17. gram times out Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 16 Phonebook continue To deletea 1 sas record from memory 2 ERASE 3 ERASE EXIT on 4 EXT Om 8 Caller Display operation When viewing the Phonebook records press UP or DOWN button to find the record you wish to edit When the record is displayed press ERASE button gt The display prompts DELETE Press ERASE button again to confirm gt The display shows next Phonebook record OR press EXIT button to cancel and return to the previous menu Press EXIT button repeatedly to return to the standby mode or wait until the program times out VERY IMPORTANT The Caller Display feature of this product requires a subscription to Caller Display service from your telephone company If you subscribe to this feature from your local telephone company you can see the phone number of the person calling you before you answer The caller display information includes E The caller s number max 23 digits The date and time of the call E The caller s name max of 15 characters if the network sends it Note 1 The Caller Display information will also include a name from the phonebook if the incoming number fully matches an entry in the Phonebook Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 17 Caller Display operation continue Viewing the 1 amp Caller Di
18. icrophone or the mouthpiece so that the person on the other end cannot hear you Press MUTE button once gt While the microphone is muted MUTE will be shown on the lower right corner of the display Press MUTE button again to get back to the call Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 12 6 Outgoing call record Last 1 Number redial 2 PAUSE Viewing the Outgoing call records 1 PAUSE CDS 20 Making a 1 Q eal from the PAUSE utgoing cos call record 2 EG Deleting an 1 Outgoing call record REDIAL PAUSE 2 CDS ERASE ERASE 4 Lift the handset or press SPEAKERPHONE button Press REDIAL PAUSE button gt The phone automatically redials the last number you called The telephone remembers the last 10 outgoing calls In standby mode press REDIAL PAUSE button gt The most recent outgoing call record will be displayed Press UP or DOWN button to view the other records In standby mode press REDIAL PAUSE button Press UP or DOWN button to find the record you wish to call When the number is displayed press DIAL button gt The phone automatically redials the number using the speakerphone mode Lift the Handset anytime to talk privately and to turn the speakerphone mode off In standby mode press REDIAL PAUSE button Press UP or DOWN button to find the record you wish to delete When the record is displayed press ERASE butto
19. ired If the unit is no longer under Guarantee first follow steps 1 and 2 as for repair under Guarantee Then 3 Call our Service Department on 0845 345 9677 and ask for a quotation of the repair charge and details of where to send your Caprice 600 for repair 4 Make sure you include with your Caprice 600 E your name and address m a cheque or postal order for the value of the repair charge 5 Return your Caprice 600 to the address given by the Service Department Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 32 E Sem r sy alter R ye 01 Standard Corded Telephone with Caller Display and Answering Machine Temperature range Operating O C to 40 C Storage 20 C to 60 C Electrical power Base unit input 230 V AC 50 Hz output DC 6 V 350 mA 2 1 VA polarity C6 99 Declaration of conformity The Binatone Caprice 600 complies with the essential protective requirements and objectives of m EC Low Voltage Directive 73 23 EEC m EC EMC Directive 89 336 EEC and conforms to the following relevant harmonized standards m Safety EN 60950 Waste electrical products must not E Other I CTR37 CTR38 be disposed of with household waste k i This equipment should be taken to EN55 022 EN55024 your local recycling centre for safe treatment Binatone operates a policy of continuous product improvement and so reserves the right to make changes to the product and functions without notice
20. is means you should keep it pressed until the display changes or you hear a tone 2 Display messages and symbols i faq Number field It shows the ws o a telephone number and the A WA ON BI OA NI OA I OA OA BA ON BI Le number of messages Letter field It shows the name l Phone You are connected to the telephone line your Handset is offhook oo Time Displays the time uoga Date Month Displays the day and month setting and the status of a call message Shows the total number of Caller Display records when the caller display is being received or when wo Caller Display oo the call lists is being viewed Record NEW NEW Appears when you have new messages and or Caller Display records Appears only when viewing a Caller display list with ma Message a recorded answering machine message X M Appears when you press the MUTE button to mute ute the mouthpiece or microphone oc Speakerphone ae when the speakerphone function is turned Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 3 2 Installation 1 Locating the Base unit The Base unit should be placed on a level surface in a position where m the mains adapter plug will reach an easily accessible 230 V AC switch mains supply socket never try to lengthen the mains power cable m the telephone line cable will reach your telephone line socket or extension socket E it is not close to a sink bath or shower
21. is switched on the MESSAGE light should be on ake sure you have not selected OGM2 with GM2 selected callers cannot leave messages see page 20 Q ake sure you are using the correct remote security code Check that you are using a suitable tone dialling phone Some cordless or mobile phones do not generate continuous tones and so are not ideal for remote operation Don t leave more than 10 seconds between key presses otherwise your call will be cut off Using your Caprice 600 on a PBX When you first make a call try pressing the REDIAL PAUSE button for a pause between the outside line access digit e g 9 and the telephone number You should later be able to redial the number When storing numbers in memory you can include the outside line access digit e g 9 with each number Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 30 Troubleshooting continue If your PBX requires you to wait for a second Dial tone before dialing the telephone number press the REDIAL PAUSE button for a pause between the access digit and the number If the fault persists Disconnect all other instruments connected to the same line as the Caprice 600 and see whether you can make a call Disconnect the Base unit from the telephone line and plug a different phone into the master telephone socket Try making a call If this works the line is OK If the call does not work and you
22. n gt The display prompts DELETE Press ERASE button again to confirm gt The display shows next record Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 13 Outgoing call record continue Storing an 1s Outgoing call record into the Phonebook 2 A memory BOOK 3 5 BOOK When viewing the Outgoing call records press UP or DOWN button to find the record you wish to store When the record is displayed press BOOK button gt The display shows the cursor blinking on the first digit of the number gt To modify the number press UP or DOWN button to move the cursor to the number you want to change then input the new one or press ERASE button to delete Press BOOK button to confirm Input the name See page 16 for entering letters gt To modify an existing name press UP or DOWN button to move the cursor to the character you want to change then input the new one or press ERASE button to delete Press BOOK button again to save the record into the Phonebook memory 7 Phonebook To view the 1 Phonebook records 2 BOOK 3 BOOK 4 ake 789 The Phonebook can store up to 120 names max of 15 characters and telephone numbers max of 24 digits in the Memory Make sure the Handset is idle not connected to a call Press BOOK button gt The display shows SEARCH ADB with the SEARCH option blinking Press BOOK button again gt If the Phonebook memory is empty the
23. ng call record into the 2 Phonebook memory 3 5 To delete a Caller Display 1 record 2 3 DIAL CDS BOOK BOOK BOOK ERASE ERASE EXIT When the Caller Display record is displayed Press DIAL button gt The phone automatically dials the displayed record When viewing the Caller Display records press UP or DOWN button to find the record you wish to store When the record is displayed press BOOK button gt The display shows the cursor blinking on the first digit of the number gt To modify the number press UP or DOWN button to move the cursor to the number you want to change then input the new one or press ERASE button to delete Press BOOK button to confirm Input the name See page 15 for entering letters gt To modify an existing name press UP or DOWN button to move the cursor to the character you want to change then input the new one or press ERASE button to delete Press BOOK button again to save the Caller Display record into the Phonebook memory When the Caller Display record is displayed Press ERASE button gt The display prompts DELETE CALL Press ERASE button again to confirm Press EXIT button to return to the standby mode Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 19 Caller Display operation continue To delete When the Caller Display record is displayed Diese i 1 O Press and hold ERASE button records gt The display promp
24. nswering system gt You will hear Answering machine ON The display shows ANSWER ON and the MESSAGE light will light up Press and hold EXIT ON OFF button again to turn OFF the answering system You will hear Answering machine OFF The display shows ANSWER OFF and the MESSAGE light will turn off Note Once turned OFF you can still call the machine and it will answer after 15 rings Press and release EXIT ON OFF button to switch between OGM1 and OGM2 gt The machine does not record messages with OGM2 Announcement 2 selected make sure OGM1 is selected if you want callers to leave messages You can record a memo directly into the machine The length of the memo message recording depends on the MESSAGE LENGTH setting see page 9 The memo message will be played back together with any messages from callers With the Handset on hook press and hold MEMO button until you hear a beep gt The display shows MEMO RECORDING and the message counter starts to count Start recording your memo Speak directly into the Base unit s Microphone from a distance of about 15 cms 6 inches As soon as you have finished speaking press EXIT ON OFF button to stop recording gt Day and time are automatically stamped at the end of the message Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 22 Answering Machine System continue To playback your message s If you have me
25. or anywhere else where it might get wet m it is not close to other electrical equipment fridges washing machines microwave ovens TVs fluorescent lights etc 2 Plug the coiled handset cord into the Handset Plug the other end into the jack on the left side of the Base unit Note The Base unit does not require a battery make sure the plugs clicks into place 4 Plug the telephone line cord into the PHONE LINE jack at the back of the Base unit Plug the other end into a modular wall jack 5 Plug the power supply cord into the POWER jack at the back of the Base unit Plug the other end to a 230 V AC 50 Hz mains socket with the switch on the socket set to OFF to Modular Wall jack 4u Always use the telephone line cord supplied with your Caprice 600 Other telephone line cords 1 may not work 7 Lift the Handset and check for Dial tone in the earpiece 6 Switch ON the mains power at the socket The Caprice 600 Base unit must be used only with the supplied mains adapter Using any other adapter may damage the unit 3 Desk Wall mount installation Desk Mount To place the Caprice 600 on a desk connect the stand to the bottom of the phone in the slots near the ringer cover as shown below flexible clips Insert the rigid clips of the stand into the slots on the bottom of the phone near the ringer cover Press do
26. ote Each OGM must be at least 3 seconds and no more than 1 minute in length Press EXIT ON OFF button briefly until you hear Announcement 1 Press and hold OGM button until you hear a beep gt The display shows OGM RECORDING and the message counter starts to count Start recording your OGM1 Speak directly into the Base unit s Microphone from a distance of about 15 cms 6 inches As soon as you have finished speaking press EXIT ON OFF button to stop recording gt The display shows PLAY OGM and your recorded message will be played back for your approval After setting the OGM1 briefly press EXIT ON OFF button again You will hear Announcement 2 Press and hold OGM button until you hear a beep gt The display shows 06M RECORDING and the message counter starts to count Start recording your OGM2 Speak directly into the Base unit s Microphone from a distance of about 15 cms 6 inches As soon as you have finished speaking press EXIT ON OFF button to stop recording gt The display shows PLAY DGN and your recorded message will be played back for your approval Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 21 Answering Machine System continue To turn the 1 amp Answering om machine ON or OFF 2 EXIT om To switch Bag between Ovu OGMs To record a memo MEMO gt do 3 EXIT om Press and hold EXIT ON OFF button to turn ON the a
27. s microwave ovens TVs fluorescent lights etc Cleaning and care Don t clean any part of your Caprice 600 with benzene thinner or other solvent chemicals this may cause permanent damage which is not covered by the Guarantee When necessary clean it with a damp cloth m Keep your Caprice 600 away from hot humid conditions or strong sunlight and don t let it get wet m Every effort has been made to ensure high standards of reliability for your Caprice 600 However if something does go wrong please do not try to repair it yourself consult your supplier or the Binatone Help Line Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 28 12 Troubleshooting The Caprice 600 must be serviced by trained engineers NEVER attempt any repairs or adjustments yourself you could make the problem worse and invalidate the Guarantee ALWAYS check E first that E E I cannot make or answer calls The phone does not ring The phone does not dial The Caller Display feature isn t working you have followed the steps listed in Section 2 to install and set up your Caprice 600 all connectors are firmly inserted in their sockets mains power is switched on at the socket Everyday use Make sure you re using the telephone line cable that was supplied with your Caprice 600 Other telephone line cables might not work Switch off power at the mains socket wait for a few
28. splay list CDS The place origin of the Caller Display record will display a special network message as Message Significant WITHHELD The caller hides his number UNAVAILABLE The caller s number is out of the network area Withheld and Unavailable calls are not saved in the calls list and do not show as missed calls Caller Display list This phone automatically stores the last 99 calls received It stores the data even if a power failure occurs When the caller display list is full the new caller display entry will replace the oldest record The NEW CALL light indicator will turn on to show that you have a new Caller Display call stored in memory The light indicator will turn off only after viewing ALL new caller display records With the phone on standby mode press UP or DOWN button gt The display shows the most recent record If there are no Caller Display records the display will show ND CALLS gt The MSG icon will show to indicate that the caller has recorded a message Press UP or DOWN button again to scroll to the next Caller Display record gt The display shows END OF LIST upon reaching the end of the first and last record Press EXIT button to return to standby mode or wait until the program times out Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 18 Caller Display operation continue To return a call from the Caller s list Storing an 1 Outgoi
29. ssages or memos the displa shows the total number of messages pg 2i AGES and the MESSAGE light flashes If you have new messages or memos the display shows yp and it will be shown alternately with the total messages Playback and Pause PLAY PAUSE O 2 PLAY PAUSE O 3 PLAY PAUSE I gt 4 PLAY PAUSE O Press PLAY PAUSE button The machine will play all new messages memos gt While a message is being played the display shows PLAY MESSAGE for received messages PLAY MEMO for recorded memos gt If there are no messages memos present you will hear You have no messages To pause a message playback press PLAY PAUSE button again Press PLAY PAUSE button again to restart message playback otherwise it will restart automatically after a 30 second pause After playing all new messages press PLAY PAUSE button again The system will play all of its messages memos Repeat Rewind OGM a To repeat the current message from the beginning press OGM REWIND button To replay the previous message press OGM REWIND button twice Skip Fast Forward MEMO O To skip to the next message press MEMO SKIP button Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 23 Answering Machine System continue To intercept a call To delete incoming messages EXIT on EE v a EXIT ERASE ERASE Stop playback To stop the message playback press the EXIT ON
30. ter 15 rings allowing you to switch the machine ON from a remote location Using a tone dialing phone dial your home phone number When you hear your outgoing message press tk When you hear a beep key in your REMOTE ACCESS code Press keypad 9 to switch ON Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 27 IIi Operational notes Electrical safety m DON T let the Base unit get wet Electrical equipment can cause serious injury if used while you are wet or standing in water m lf the Base unit ever falls into water DON T retrieve it until you have unplugged the power lead from the mains and the telephone line plug from the telephone socket then pull it out by the unplugged cables m NEVER use your Caprice 600 outdoors during a thunderstorm unplug the Base unit from the telephone line and the mains socket when there are storms in your area Damage caused by lightning is not covered by the guarantee Locating the Base unit The Base unit should be placed on a level surface in a position where m the mains adapter plug will reach an easily accessible 230 V AC switch mains supply socket never try to lengthen the mains power cable m the telephone line cable will reach your telephone line socket or extension socket E itis not close to a sink bath or shower or anywhere else where it might get wet m itis not close to other electrical equipment fridges washing machine
31. ts DEL ALL CALLS 2 erase Press ERASE button to confirm gt The display automatically returns to standby mode EXIT n OR press EXIT button to cancel and return to the previous menu 9 Answering Machine system Outgoing An OGM is the announcement callers will hear Messages when the machine answers a call The Caprice OGM 600 has two pre recorded announcements available if you choose not to record your own OGMs OGM1 this invites callers to leave a message after the tone The default is Please leave your message after the beep OGN2 this informs callers to call later and does not give them the opportunity to leave a message The default is Please call later The machine has enough memory to record about 20 minutes of messages OGM Caller s message Memo When there is no further memory available to record it will answer after 15 rings and the machine will announce Memory full please call later The display shows MEMORY FULL and it will be shown alternately with 44 and TA To play the Make sure the machine is switched on OGM nt ocM Press OGM button O gt The display shows PLAY OGM and plays the current announcement Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 20 Answering Machine System continue To record OGM 1 EXIT 1 Ou OGM 2 i O E 4 EXIT om To record 1 ex OGM 2 Ov 2 OGM Make sure the answering machine is turned on N
32. wn firmly until the flexible clips clicks into place To remove the stand 1 pinch the flexible clips 2 pull back the stand and then 3 slide 4 and forward 7 as shown below pms Wall Mount To place the Caprice 600 on a wall connect the stand to the bottom of the phone in the slots near the battery cover as shown below Binatone Help Line 0845 345 9677 Calls are charged at Local Call rate 5 Desk Wall mount installation continue Insert the rigid clips of the stand into the slots on the bottom of the phone near the battery cover Press down firmly until the flexible clips clicks into place To remove the stand 1 pinch the flexible clips 2 pull back the stand and then 3 slide up and forward as shown below ark two points on the wall that are 137mm apart to lay the fixing centers as shown below Note The Base unit X does not require a battery arrangement for wall mounting BE CAREFUL to check that there are no electrical wires hidden in the wall Fix two screws supplied with the unit at the marked locations leaving approximately 7mm between the wall and the the screw head Hang the cradle unit on the screws using the wall mount slots You may need to remove the telephone from the wall and tighten the screws so that the cradle is securely fixed and does not wobble Place the Handset on the cradle with the parking hook on the cradl
Download Pdf Manuals
Related Search