Avaya CM160 User's Manual
Contents
1. CM160 Universal Mobile Phone Vent Mount Installation Instructions Step 1 Choose a suitable vent location for installation Attach the vent mounting clips to the back of the pedestal with the vent clips correctly positioned with the flat sides facing up Mounting clip Mounting clip Step 2 Gently insert vent pedestal into vent louvres until the mounting clips are attached to the fin blade of the vent Adjust the spacing between the mounting clips if necessary Warning Arkon is not responsible if the vent louvres become damaged as a result of the installation or use of this mount Safety Precautions Do not reposition the pedestal while driving Arkon Resources Inc does not promote the adjustment of hand held devices except when the vehicle is safely parked or stopped Arkon is not responsible for any damages caused to your car your device or yourself due to the installation or use of the pedestal mount CMO030 Universal PDA MP3 Cradle CM047 S Vent Mount Pedestal fully assembled Step 3 Adjust the support leg vertically until it rests firmly along the bottom of the vent or dash surface below the vent It will need to support the weight of the cradle and device N Support leg If necessary move the support leg to the alternate bracket holes Step 4 If necessary you can rotate the lateral head by holding the swivel mechanism and gently pulling and rotating the head to the desi2. l service department at 626 254 9005 Step 5 ARKON RESOURCES INC The Mobile Mounting Specialists www arkon com Arcadia CA 91006 USA Made in Taiwan Copyright 2007 Arkon Resources Inc
3. red angle Warning Do not attempt to pull out the lateral head to rotate without first holding the pedestal for support Pulling on the head and assembly can damage your louvres Rotate Spring loaded I swivel mechanism Consumer Hotline USA 800 841 0884 INT L 626 254 9005 Mon Fri 9am 5pm PST Package Contents 1 CM030 Universal Mobile Phone Cradle 1 CM047 S Vent Mount Assembly NOTES 1 This vent mount kit is designed for permanent and semi permanent use only This assembly can be difficult to remove from your vent louvres Be careful if removing the vent assembly 2 This vent mount kit is not compatible with circular air vents Step 5 While holding the pedestal s swivel mechanism align the T tab on the pedestal face to the T slot on the back of the cradle and slide down T slot Cradle back T Tab Removal of Vent Mount Clips Warning The vent mount assembly can be difficult to remove from your vent louvres Remember to use the utmost care when trying to remove the vent assembly so as not to damage your vehicle Step 1 Step 2 Remove the cradle from the vent mount assembly Step 3 Carefully slide the mounting clips inward as close together as possible to help remove the pedestal from the clips at the center hole Step 4 Carefully pinch the clip and angle the clip off of the vent fin blade If are unable to remove the vent mount clips please call our technica
Download Pdf Manuals
Related Search