Apple Mac Pro ATI Radeon Graphics Card Cable Owner's Manual
Contents
1. 073 1250 Rev B 22. Mac Pro ATI Radeon Graphics Card Cable Replacement Instructions First Steps Note Follow these instructions carefully Failure to do so could damage your equipment and void its warranty 1 Shut down computer 2 Wait 10 minutes Warning Parts inside computer can be very hot Allow computer to cool down before continuing 3 Unplug all external cables except power cord 4 Touch metal PCI cover on back of computer 5 Unplug power cord Opening the Computer 1 Hold side access panel and lift latch on back of computer Warning Edges of access panel and enclosure can be sharp Be careful when handling 2 Remove access panel and place it on flat surface covered by soft clean cloth 2009 2010 Apple Inc All rights reserved 073 1250 Rev B 1 Removing and Installing the Cable 1 Disconnect card s cable s from backplane board 2 Disconnect card s cable s from card 3 Connect replacement cable s to card and backplane board Closing the Computer 1 Replace access panel Note Make sure latch is up before you replace panel If latch is down panel will not seat correctly 2 Push latch down to close and secure access panel Warning Never turn on computer unless all its internal and external parts are in place and it is closed Operating computer when open or missing parts can cause damage or injury 2009 2010 Apple Inc All rights reserved
Download Pdf Manuals
Related Search