Agio Sling Chaise Lounge Assembly Instruction
Contents
1. IMPORTANT PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY Important Note The basic assembly of the chaise lounge is to attach the back frame to the lounge frame We recommend two people work together to line up the holes on the back frame with the fixed nut holes on the lounge frame to ensure the bolts are on a straight direct path Starting the bolts at an angle could cause cross threading which will ruin the entire lounge frame Step 1 Identify all parts packed in the carton against the parts list Remove all protective materials Set the parts on a flat non abrasive surface If you are missing any parts or are unsure as how to proceed with the assembly please call our Customer Service Center at 1 800 416 3511 Do not attempt assembly if any parts are missing or damaged Step 2 From behind the chaise lounge back frame add a E8 5x1 5mm washer to bolt and insert a bolt through the hole in the lower sling back frame Add a E15x4mm plastic washer before inserting into the fixed nut inside the sling seat frame see diagram Hand tighten 3 4 revolutions only Completely tightening at this point could cause the frame or the sling seat to be uneven Repeat on opposite side Step 3 Using the hex wrench provided tighten bolts Tighten each bolt a few revolutions at time alternating back and forth between the two bolts until they are completely tightened It is important to alternate between bolts to ensure your frame and sling seat2. are even Do not over tighten Over tightening could damage the threads on the bolts or nuts Step 4 Examine the chaise lounge from the front The back frame should look square and be tight If the back frame is appears warped or uneven loosen all the bolts and repeat steps 2 and 3 Step 5 Your chaise lounge should be ready for use If you do not feel that your chaise lounge is sitting properly double check your assembly procedure If you have any questions please call our customer service center at 1 800 416 3511 PARTS LIST DESCRIPTION QTY PCS PARTS LIST DESCRIPTION QTYJPCS SLING SEAT FRAME 1 Coy BOLT 2 E15 X 4MM SLING BACK FRAME 5 1 masncwasr E8 5 X 1 5MM HEX WRENCH 1 SS WASHER 2 Page 2 MODEL 50 4662 702
Download Pdf Manuals
Related Search