User Guide Ioline FlexPlot
Contents
1. 2 Make sure that FlexJet power is on loaded with paper and an Origin is set OK Green See the FlexJet User Guide for details on preparing the FlexJet to print 3 Press the Send button in the spooler window to send all of the markers listed in the Current Marker Queue to the printer The file at the top of the list is sent first followed by the other files in the order they are shown 4 Press the Abort button if you ever need to stop printing Posi tion the carriage and press Set Origin on the FlexJet keypad to reset the printer and prepare to send new markers Using Automatic Queue Automatic Queue provides a way for users to automatically send files to the FlexJet without having to interact with the FlexPlot soft ware Once Automatic Queue is active any file copied to the queue folder is automatically imported and sent to the FlexJet Multiple users can all copy marker files to the same location on a network and FlexPlot will add them to the queue in the order that they appear in folder To Enable Autoqueue 1 Choose the queue folder in the Browse window where users will copy marker files to This folder can reside on the local hard drive or a network 2 Ifthe Automatic Queue button is grayed out select the Enable Automatic Queue option in the Setup window 3 Press OK then Start when you are ready to start importing files and sending them to the FlexJet Automatic Queue START Sana Mark2. Create a new queue Displays a preview of the currently selected marker Sends all files listed in the Marker Queue win dow Files at the top of the list are sent before files listed below them Setup Window Device Communications Baud Rate Flow Control Select Port Choose the speed of communication over the port connected to the FlexJet This must match the baud rate in the printer See the FlexJet User Guide for more information The default is 38 400 Choose FlexJet software for printers or Ae Plotter Hardware CTS for a pen plotter The default is FlexJet software Choose the computer communication port connected to the FlexJet COMI is the default Setup Window System Control Delete Source File Empty Converted File Archive In Preview Max Plotter Width 86 in Overwrite Files Save a Copy Show Archive Size Show Total Inches Suppress Normal Units Remove the original plot file from the Import Marker folder after loading and converting the file in the queue folder This option is default OFF When files are converted by FlexPlot an archive copy of the output PLX file is stored in C Ioline Converted Pressing this button will delete all the copies from this folder Press the Show Archive Size button before deleting the files to see how much space the files use When checked text labels in markers are displayed in the Preview Window While use ful slower comp
3. File Confiquiation Phot File Type IHPGL Plot Destination Pth TPE Cal Destination Path EPGL SSCS cos Figure 7 Accumark DOS Configuration Use the folder CAHPGL for the Plot Destination Path if you want to store the Gerber output files in the default input folder for 3 Inthe window choose HPGL as the plot file type Enter a path the FlexPlot for the Plot and Cut files 2 Open the Configuration menu and select DOS File Configuration 14 loline FlexJet User Guide Export HPGL Files From Gerber Accumark 1 Start the Gerber System Management program by double clicking the program icon EXIT UTILIT STORAGE AREA p REPORTS ACTIVITY LOS DATE TIM Figure 8 Accumark Storage Area Choose the Storage Area where the marker files are stored Choose Enter when finished Figure 8 PRINT OUTPUT PIEC _ PLOT PRC _ CUT AVI Figure 9 Accumark Plot Window Choose Plot to open the Plot Window Figure 9 PIECE PLOT _ amp MARKER PLOT N QUE CUT PLOT SF Figure 10 Accumark Marker Plot button Press the Marker Plot button to open the marker plot export utility Figure 10 PLOT DESTINATION DOS FRE CHARACTER SIZE 0 64 Figure 11 Accumark Plot Destination button 5 Click on the Plot Destination button until it reads DOS FILE Figure 11 ania e eun MARRER NAME PLOT NAME 03020 R 02 25 99 003020 001 003020 H 02 25 59 00302
4. in Setup to enable it This window shows the current folder and drive volume list Exits the FlexPlot software Displays length width and name of the im ported file When using STD files the Mi cromark Info button is activated Pressing it shows detailed information about the marker Enable Disable help buttons for pop up tips Lists the file types compatible with FlexPlot Selecting a single file type from the list will make only that file type appear in the Import Marker File window Choose All Files to display all files in the folder The selected file name is displayed in the top window and other available files in the Browse folder are displayed in the smaller window below Loads the currently selected file into the FlexPlot software File length width etc is displayed in the File Information Window See also Using Automatic Queue in this chapter Automatically converts all files in the current folder and adds them to the Marker Queue Add a gap blank space after each marker When importing STD files the Micromark Info button is activated Pressing it shows de tailed information about Micromark markers Conserve paper by stacking narrow piece jobs or other small markers across a wider marker See the Piece Plot Optimization Window below FlexPlot breaks a wide marker into columns if the width Y of the file is larger than the Y value shown in the Size of Panels Adjust the scale of the impo
5. is also compatible with this method For more information on the rest of the settings please consult the user s guide provided by PAD Systems 21 22 loline Flexjet User Guide NOTES
6. service center is ready to help Support information is also available 24 7 on the Ioline Web site or you may contact Ioline directly loline Corporation 14140 NE 200th Street Woodinville Washington 98072 U S A loline Customer Service Department Monday through Friday 7 00 A M 5 00 PM U S Pacific Time Voice 425 398 8282 Fax 425 398 8383 techsupport ioline com www ioline com Part Numbers Print 108212 Rev 4 File 108211 Rev 4 IOLINE FLEXPLOT TABLE OF CONTENTS TABLE OF CONTENTS Installation amp Setup Installing FlexPlot O UEDENIDUNURII OR IS COEUDUNP NM ISDN ME HD ENUEUEGE 5 Ij o eee ee 6 Miport Marker FES arras 7 PREPIS iia 7 Using Automatic Queue c 8 Command Index sena rra 9 Main Window nina aaa aii 9 Marker Queue a aida 10 SetuP NON Piece Plot Optimization Window ss 12 Design Software Setup Guides Setup Gerber Accumark 7 x for HPGL Export 13 setup HexPlot to find the Fes 5 Setup Lectra JustPrint for ASTM 6959 File Export 16 Installation Option Installing the JustPrint Software for the First Time 16 install the FHIESEPPIEOE unas 16 Testing the dsl iet to snags peti p tepmies E drop iisas enean uE 18 Installation Option 2 Adding a Printer to an Existing JustPrint Installation 19
7. setup JustPrint for Options and 2 8 19 A nn PP lecse sees A ER A ENE 19 Setup PAD Plot Network for HPGL File Export 1 20 Setup PAD System for HPGL Export vesical ds 20 Setup PlexPlot to find the files nes 2 Installation amp Setup The loline FlexPlot Software will convert and send HPGL DM PL DXF ASTM 6959 and MicroMark output files to loline apparel printers Users of Gerber Lectra PAD and many other design systems can now create markers with familiar software but use loline apparel printers for marker output System requirements 32 bit version of Windows 2000 XP Vista 25 MB of hard disk space 1024 x 768 minimum screen resolution and an loline Flexjet connected to a communication port Installing FlexPlot 1 Close all other applications prior to installation 2 Insert the installation CD ROM into the computer CD ROM drive Select Components In the options list below select the checkboxes for the software that you would like ta have installed The disk space fields reflect the requirements of the options you have selected Iv FlexPlot Marker Queue 7105 k v Flextet Control Center 3645 k WM Adobe Acrobat Reader 22005 k v FJ Printer User Guide 9975 k e FJ Printer Quick Start Guide 6303 k M FlexPlot User Guide 1226 k M StudiaJet Quick Start Guide 023 k Disk Space Required 49961 k Disk Space
8. 0 002 Figure 12 Accumark Marker Name Window 6 Enter the plot file names in the Marker Name Window Use the F4 key to browse Figure 12 EX I L PROCESS M PROCESS GROUP sm Figure 13 Accumark Process button 7 After all of the plot file names are entered click the Process button The files are saved with the first eight characters of the marker name They typically have numeric extensions like 000 or 001 Figure 12 amp 13 8 Exit the System Manager program by pressing Exit three times Setup FlexPlot to find the files 1 Open FlexPlot 2 Use the Browse Window to find the folder where Accumark will store the files chosen above You may have to choose a new hard drive or mapped network location from the drive window before you can see the folder 3 Once the folder is selected use the normal methods of import ing files AutoQueue is also compatible with this method 15 l6 loline FlexJet User Guide Use the folder C HPGL for the Plot Destination Path if you want to store the ASTM6959 output files in the default input folder for the FlexPlot Setup Lectra JustPrint for ASTM 6959 File Export Installation Option I Installing the JustPrint Software for the First Time if required 1 Install JustPrint and IManager as instructed in the documenta tion from the vendor When the installation is complete a small box will appear labeled Configuration Assistan
9. DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING DAMAGES FOR LOSS OF PROFITS LOSS OF BUSINESS LOSS OF USE OR DATA INTERRUPTION OF BUSINESS AND THE LIKE EVEN IF IOLINE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT Limit of Liability Statement It is the responsibility of the operator of the software to monitor performance and maintain it in proper working condition by following the instructions in this User Guide It is the responsibility of the operator of the printer to follow all safety precautions and warnings that are described in this User Guide and the FlexJet User Guide Ioline Corporation is not responsible for injuries that may occur as a result of unsafe use Ioline Corporation is not responsible for substandard operational performance as a result of failure to maintain the software or printer as described in this User Guide and the FlexJet User Guide Ioline makes no warranty regarding the accuracy of the documentation or system 2003 2008 Ioline Corporation All rights reserved This manual may not be copied photocopied repro duced translated transmitted or converted to any electronic or machine readable form in whole or in part without prior written approval of Ioline Corporation Service and Support If you require assistance with an Ioline product your local Ioline dealer or authorized
10. Hemaining 115044533 k dex ren ces Figure l Insert the Installation Disk in your CD ROM drive to install FlexPlot 6 loline FlexJet User Guide 3 Theinstallation program should start automatically If not go to the Start Menu and click on Run Browse the CD ROM drive usually D and double left click on iosetup exe 4 Follow the self guided installation procedure The default set tings are acceptable for most users Ioline recommends that you install the manuals and the Adobe Acrobat viewer along with the FlexPlot software See Figure 1 loline FlexPlot Revision 4 Import Marker File 3 10 44 PM CHPGLY File Information Load Save All Automatic Queue Import File Type All File Types Piece Plot Optimization Size of Panels AS Setup About Length 00 460 i Width cv 720 in n ok Ext ES Marker Gap Gap Between Markers Length Xy 10164n Width Y 1016 n m i Sc Marker Queue Sond Path c ioline Queued __ Send at Browse Hew Abort Marker Information Length Width Sent inches iz Move up Move down Delete Delete All Copy Insert Stop Change Start Frame Preview Marker Figure 2 The Main FlexPlot Window Setup 1 The loline FlexPlot program icon is stored on the desktop or un der Start Programs Ioline Start T FlexPlot by clicking the program icon The main program window FlexPlat will appea
11. LConf Generation directory CAHPGL El Vectorize the character font Owner Figure 17 A Generation Directory where FlexPlot will find the files 18 loline FlexJet User Guide Testing the Installation Printer Manager I Operating test Do a plot test to finish the install of your peripheral Figure 18 The Plot Test Window 1 Press the Plot Test button to ensure that the program can write a file to the chosen location Figure 18 PrinterManager i s Operating test Click Finish to finish the install of your peripheral or click Cancel to cancel the install Figure 19 Accept settings if the test was successful Otherwise go back to make adjustments 2 Press Finish if the test was a success If there was a problem return to the previous step to make any adjustments necessary Click Next then Finish 4 If there are no more peripherals to install press No Installation is complete Installation Option 2 Adding a Printer to an Existing JustPrint Installation 1 Open the folder Start gt Lectra gt PlotterList V5xxxx where xxxx represents the version number Click on New Plotter Choose HPGL Generator from the list then press Next Give the Peripheral a name like HPGL Printer and place a check in the box next to Yes to make this the default Click Next Click Next in the summary window Click Next Choose a Generation Directory which is
12. User Guide oline FlexPlot Revision 3 lala Import Marker File 2108 39 PM CHERRY leal pit EM e information Load impor File Legh XY Preview Was Dx Load Sae All Import File T Automatic Queue Aduariced I mp ile Type a s dq a 7 Browse stum is ic i 745 a di a Se LOCAL DISK Joline FlexPlot Send Spooler Marker Que Path choline n Send v E _ Browse w Abort 4 D Luis IOLINE FLEXPLOT USER NOTICE Trademarks Ioline and FlexJet are trademarks of Ioline Corporation HP is a trademark of the Hewlett Packard Com pany All images and names related to Gerber Accumark are the property of Gerber All images and names related to Lectra JustPrint are the property of Lectra All images and names related to PAD Plot Network are the property of PAD Other product names logos designs titles words or phrases men tioned within this publication may be trademarks service marks or trade names of Ioline Corporation or other entities and may be registered in certain jurisdictions including internationally Ioline Disclaimer IOLINE CORPORATION PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT SHALL IOLINE ITS
13. bels of this type 12 loline FlexJet User Guide The Piece Plot Optimization window uses whatever folder was selected in the main FlexPlot window as the source for files to optimize Setup Window Import Options DXF Scale Factor DXF Use Dimen Enable Rotation Shift Origin Some DXT files use non typical scaling com mands that FlexPlot cannot interpret When that is encountered use the scale factor box to make adjustments to correct the converted file size This option is default OFF Uses image boundary settings imported from the DXF file These are usually much larger than the image and can cause problems Oc casionally they are required for images from some CAD programs or the image is clipped This option is default OFF When checked HPGL files that use the rota tion command are properly printed This op tion is default ON Move marker data to positive space This option is default OFF Setup Window Advanced Options Enable Automatic Reset Defaults Save Plot Log file Send End Queue Show Plot Progress Enables the Automatic Queue button on the main screen This option is default ON Restores all default values to the Setup op tions Saves a diagnostic log file into the C Moline folder Only required if requested by Ioline Customer Service This option is default OFF When checked a file called End queue plt stored in the C Ioline folder is sent when ever a qu
14. er Queue Path c VolinelQueuedt PE SENDING 6 JOWSe Abort Marker Information Length Width Sent inches a c loline Queued O1 marker plx i 64 51 0 0 Move up Move down Delete Delete All Copy Insert Stop Change Start Frame Preview Marker Figure 6 The FlexPlot Marker Queue 4 When a file is written to the folder shown in the Browse window it is automatically shown in the Automatic Queue Window may take a few seconds The first file in this window is sent directly to the printer then removed from the list As files are added to the folder they will appear in the Automatic Queue Window where you can reorder them Only the file that FlexPlot is currently sending to the printer is shown in the Send Queue Window 5 Press the Abort button if you ever need to stop printing Posi tion the carriage and press Set Origin on the FlexJet keypad to reset the printer and prepare to send new markers 9 Command Index Main Window About Automatic Queue Browse Exit File Information Help Import File Type Import Marker File Load Import File Load Save All Marker Gap Micromark Info Piece Plot Optimization Scale Setup Size of Panels Displays program and version information Opens the Automatic Queue window Files sent to the current Browse location are auto matically converted and sent to the FlexJet If this button is disabled go to the Advanced Options tab
15. eue finishes the last file The user may modify the file as desired This feature is default OFF When checked the progress bar is displayed during plotting Requires up to date firmware and only works in printers This option is default ON Piece Plot Optimization Window Add to Piece Plot Delete Piece Source Cancel Clear Piece Plot Clear Selection Convert Select All Add highlighted files to the Piece Plot File list Deletes the source file after it is converted and added to the optimized list Abandon conversion and exit the window Remove all files from the list Remove highlighted files from the list Convert files in the list to PLX files and send file to Marker Queue Highlights all files in the Import folder Design Software Setup Guides Setup Gerber Accumark 7 x for HPGL Export Follow these steps to configure Gerber Accumark version 7 to cre ate HPGL formatted files for use with the Ioline FlexPlot It is also possible to plot direct from the Gerber Software to the FlexJet Visit the Ioline Support website for more information oc AccuMark Utilities Ele BEIDE Storage Area View Help System Management Multi Order Parameter Tables Hotkeys Flotter Settings 7 3 Network Plotter DOS File Configuration Network parameters Figure 6 The Gerber Accumark Menu 1 Double click the program icon to start the Gerber Accumark Utilities Dos
16. ling printing The Insert Stop command does not pause the FlexJet in the middle of printing The printer will continue to print all the data in the buffer until it encounters a Pause Marker at the end of a file Marker Queue Abort Browse Change Start Frame Copy Delete Delete AII Insert Stop Marker Information Marker Queue Move Up Down New Preview Marker Send Stops sending data to the printer The FlexJet will halt after printing the data in its buffer Press Start Stop on the keypad to immediately stop printing Choose a queue on a hard disk or network volume If the FlexJet runs out of paper or ink before completing a marker you can reprint the marker from the Frame at which the media ran out to save time and consumables See side bar for more information Creates multiple copies of the selected marker Remove the selected marker from the Marker Queue list Removes all markers from the Marker Queue list Places a stopping point between the selected marker and the next marker in the list The FlexPlot stops sending print data after the marker with the PAUSE symbol is complete then waits for the user to press the OK button to continue printing Displays length width and progress data for files in the queue Shows the queue to which files are saved and sent Change the order markers are listed and sent in the queue These buttons do not work on the marker currently printing
17. ot Nerwerk 3 5 0 3 hdr Dian PAD System Figure 20 PAD System splash screen 2 Select File gt Preferences gt Plotter Pattern Options Marker Options Rulers Network Manage Figure 21 Pick Plotter from the File Menu 3 Inthe plotter window select Plotter HPGL2 Plotter Port File Click OK Figure 22 Select a plotter and port 5 When the Plotting to a File window comes up choose a default location to store the files created by the program You will setup FlexPlot to look in this location later If the folder is located on a network you may have to provide log in informa tion Click OK to close this window i Current foldes for clot fles Coin Quevedo Figure 23 Choose a default file folder Back on the plotter window under Plotter Parameters make sure METRIC is selected As for the rest of the settings a Paper Width Actual width of the paper installed on the plotter b Frame Length Ioline recommends 35 inches Rote Caen Figure 24 Select the metric measure ment system Setup FlexPlot to find the files 1 2 Open FlexPlot Use the browse window to find the folder where PAD Systems will store the files chosen above You may have to choose a new hard drive or mapped network location from the drive window before you can see the folder Once the folder is selected use the normal methods of import ing files AutoQueue
18. r See Figure 2 2 Determine the serial port number on the PC that is used to send data Figure 3 The FlexPlot icon to the printer The FlexPlot soft ware can use COM 1 through 8 Press the Setup button to open the Setup Window See Figure 4 Choose the port and communication baud rate on the Device Communications dialog box The default baud rate is 38 400 for the FlexJet and 9600 for the 600Ae 28Ae and 600AeX Default settings for the other features typically work best for most users See the Command Index for a description of each feature in the setup window 5 Press the OK button 6 Exit when the settings are complete Plotter Setup Advanced Options Device Communications Baud Rate 9600 C 57600 C 19200 7 115200 38400 Figure 4 The FlexPlot Device Communications Setup Window Import Marker Files 1 Startthe FlexPlot software if it is not already running The main program window will appear See Figure 2 2 Choose the location of the files to import in the folder and file lists on the left side of the FlexPlot window If the files are not visible choose the correct file type in the Import File Type list 3 Left click on the desired file name then press the Load Import File button to convert the file and send it to the Marker Queue shown in the spooler window Use the CTRL and SHIFT keys to select multiple files at a time The FlexPlot software creates a new file in the queue
19. rted marker The Save button makes the settings permanent Displays the FlexPlot Setup window See Setup Window below box Each column is stored in the queue as a separate file with the same name but with a number after each one indicating the column number This way the user can print markers that are wider than the printer Displays the width of the Y carriage motion and length X paper motion panels Setting these val ues smaller than the imported marker will break it into smaller pieces Smaller Y makes multiple columns for printing extra wide markers on nar row printers Smaller X speeds up printing 0 loline FlexJet User Guide Press the Set Origin button after aborting a print job This clears the memory and prepares the printer for the next plot To use Change Start Frame select the file in the Send Queue list then press the Change Start Frame button Determine a Starting Frame Num ber The frame size and starting point is displayed under the file name Example A marker failed 125 inches from the beginning and it has 46 inch frames The first two frames printed 92 inches 46 x 2 of the marker Enter 3 in the Start Frame Number box so that the two frames are skipped and the missing portion of the third frame between 92 inches and 136 inches is printed To stop printing immediately press Start Stop on the Flexjet keypad Consult the FlexJet User Guide for more information on pausing and cancel
20. t Step 2 1 Follow the steps shown in Install the First Printer below Install the First Printer 1 Choose the default language and unit system pressing Next after making a selection Configuration assistant step 2 3 Choose plotter connection mode lays is connected to a remote PC ww Alys is connected to a remote PC Windows printer HPGL Generator Figure 14 Lectra connection mode When the Configuration Assistant reaches Step 2 Choose HPGL Generator from the list Figure 14 Give the peripheral a name and place a check in the box next to Yes to make this the default Figure 15 Click Next in the Summary Window A Configuration Recap Window will appear Figure 16 Choose a Generation Directory the default location where marker files are stored by the program You will setup FlexPlot to look in this location later If the folder is located on a network you may have to provide login information Also remember to uncheck the Vectorize the Character Font box Figure 17 7 PrinterManager Peripheral identification Enter the peripheral name HPGLGenerator Do you want to use this peripheral by default Yes C Mo Finish Figure 15 Assign a peripheral name PrinterManager j Configuration recap You are in the process of installing a Peripheral called HPGLGenerator it uses the driver HPGLGenerator Itis the default peripheral Finish test HPG
21. the default location where marker files are stored by the program You will setup FlexPlot to look in this location later If the folder is located on a Network you may have to provide log in information Also remember to uncheck the Vectorize the Character Font box Click Finish to exit the program Close the PlotterList applica tion Setup JustPrint for options and 2 1 2 3 4 Open JustPrint Select Tools gt Activity Management Click on Create Type a name into the Activity window then choose the plot ter name from the list that matches what was used in the steps above Choose Roll 180 in the Paper Format box Do not check the Plots in a File Window Click Save Click Close The chang es will show up in the Activity window Click Close again Printing a File 1 2 Should you require any additional information concerning the instal Choose the Activity name from the drop down list Click Add and choose the markers that you wish to print Press Add to Batch When all markers are added click Close Click on the Plot button to generate HPGL files in the default folder chosen during setup Close JustPrint open FlexPlot choose the files from the folder and send them to the FlexJet lation procedure please contact Lectra support 19 20 loline Flexjet User Guide Setup PAD Plot Network for HPGL File Export Setup PAD System for HPGL Export 1 Open Pad System Plot Network Pl
22. uters may take a long time to show this information The default is OFF Increase maximum Y panel width from 72 in to 86 in for 2 2m eX models This option is de fault OFF When checked the FlexPlot will automatically overwrite duplicate files in the C MolineNCon verted folder without asking the user This feature is default ON When checked a copy every marker file converted by FlexPlot is stored in C loline Converted This is useful as an ar chive of past jobs The folder size can get very large Use the Show Archive Size and Empty Converted buttons to manage the Converted archive This option is default ON When files are converted by FlexPlot an archive copy of the output PLX file is stored in C Ioline Converted Pressing this button will show how much space the archive files are using Press the Empty Converted button to delete the files Displays the total inches printed on an inkjet does not work on pen plotters Make sure the printer is turned on and not in use before checking this value Enabling this feature will hide the non critical messages that FlexPlot displays These are related to verification for overwriting files sending files to the printer etc This feature is default OFF Choose between inches or centimeters The default setting is inches The default is inches Some markers do not use label commands and show the labels as pure vectors The In Preview setting will NOT affect la
23. with the source file name but with a PLX file extension Print Markers 1 The current Marker Queue is shown in the bottom window The default FlexPlot file location Figure 5 Markers added in Step 3 above are displayed in the is C HPGL Marker Queue list The file will stay in the list until the Send button is pressed or the file is deleted Marker Queue Path c olineQueued EL v Browse Mew Abort Marker Information Length Width Sent inches 349 26 6451 0 0 c loline Queued O1 marker plx Hint Choose All File Types in the Import File Type list to see all the files in the folder FlexPlot will automatically recognize files that it is compatible with when they imported Move up Move down Delete Delete All Copy Insert Stop Change Start Frame Preview Marker s Iam da es EE LS x art zd Figure 5 The FlexPlot Marker Queue 7 8 loline Flexjet User Guide The Move Up and Move Down buttons in the Send Queue move the selected file printing order up or down one position The Send and Save Queues can hold many marker files After the Send button is pushed each file is printed in the order that it is displayed in the queue The top files are printed first Files added before the queue is emptied are included in the active queue Once Automatic Queue imports and converts a file it deletes it from the queue folder
Download Pdf Manuals
Related Search