GUEST•LOCK PROGRAMMING AND USER GUIDE
Contents
1. the doors on which to enter your Master Code and any Sub Master Codes The Lock ID should be entered against each door number PROGRAM 01 Change the Master Code MC Example SUDELGGKS CUM 123456 01 667889 667889 Result The MC has been changed to 667889 PROGRAM 02 Set or change a Sub Master Code SMC A SMC is programmed into all the locks in a particular section which will be the responsibility of one Room Service employee and the SMC code should be noted against the appropriate door numbers Example CODELOCKS COM 667788 02 01 345432 345432 ee Note 01 indicates that this is the first SMC in the lock Result Your new SMC is GSBELOCKS COM 3 45439 www guestlock co uk sales guestlock co uk Guest Lock Coded Door Solutions PROGRAM 03 Change the Lock ID Example CODELOCKS COM E6 7829 03 123 ee Result The Lock ID has been changed to 123 PROGRAM 04 Change the Guest Code Cancellation number Note If this is necessary it should be changed in all the locks Example CODELOCKS COM 667889 04 e 911 ee the number must be in the range 900 999 Result The Guest Code cancellation number has been changed to 911 A guest can change his personal code at any time without involving management as follows Example CODELOCKS COM 41234 CODELOCKS COM o 5678 5678 ee Result The guest has changed his code from 1234 to 5678 REVERTING TO FACTORY SETTING If the Master Co2. Guest Lock Coded Door Solutions GUESTeLOCK PROGRAMMING AND USER GUIDE All locks are delivered with the following factory set codes Master Code S2DELOCKS COM 123456 Note Master and Sub Master Codes must be 6 digits Guest PIN Cancellation Code 999 Individual locks are programmed with a random 3 digit Lock Identity Code Lock ID shown on a tie on label The locks are delivered with two keys These are not required for general use and should be labelled with the appropriate door number and kept for use by a guest who cannot use a code number or in a situation which requires a mechanical override for example when a tradesman needs access The pre set UNLOCK time after code entry is 6 seconds after which the lock automatically re locks The CL2000H provides in excess of 80 000 openings from 2 x AA cells rated at 2 900 mAh The CL4000H provides in excess of 80 000 openings from 2 x AA cells rated at 2 900 mAh When battery power is low the red light will flash 5 times before the green light flashes to signal acceptance of a valid code Batteries should be changed as soon as this happens although the lock will continue to work for some days after the low battery warning PROGRAMMING It is easier to program the locks before they are installed To avoid confusion the lock boxes should be labelled with the door number to which they will be fitted and dealt with one at a time Before starting to program you should have a list of
3. de is not known the lock memory can be cleared and made to revert to the factory Master Code as follows 1 Remove one battery 2 Press and hold the 0 button replace the battery the green LED will flash twice beep will sound twice then release the O button 3 Within 3 seconds press the 0 button 3 times The green LED will light continuously for 7 seconds and then 2 beeps will sound The lock will have reverted to the factory set Master Code CODELOCKS COM 43456 and the factory set Cancellation Code 999 all other settings will be erased After reverting to factory setting NOW enter your Master Code and reset Lock ID www guestlock co uk sales guestlock co uk
Download Pdf Manuals
Related Search