product user guide - Mabey Hire International
Contents
1. 10 x3 704 RPAS1020 2 0x1 0 310 RCP7X3 _7 x3 512 RCP10X4 10 x4 880 RPAS1525 2 5x1 5 626 RCP7X4 _7 x4 640 RCP10X5 10 x5 1056 RDAS2512 2 5x1 25 522 RCP7X5 _7 x5 768 RCP10X6 10 x6 1232 RDAS2535 3 5x2 5 1457 RCP7X6 __7 x6 896 Anti Skid Plate RPAS3020 3 0x2 0 1000 RCP7X7 7x7 1024 IRCP8X4 AS _ 8x4 752 RPAS4020 4 0x2 0 1342 4 No Lifting Points Page 1 of 2 5 Stacking and Handling Suitable firm level storage areas should be made available on site for stacking Suitable lifting equipment of adequate capacity should be provided for off loading and installation Slinging should always be carried out by suitably experienced and competent personnel The weight of each unit is given overleaf Units should be stacked on 4 x3 timbers to a maximum of 10 No high depending on size weight and storage area 4 x 3 Timbers Maximum 10 Units High Transportation Ensure that the plates are securely restrained to the vehicle bed Installation 7 1 Excavator or crane lifting requirements when positioning units over narrow trench Refer to manufacturer for X Dimension from machine load capacity rear of unit to centre line of crane excavator when standing a safe distance from the trench Radius Max Lift Unit Weight Weight of Chains see Page2. number for each plate is welded onto each unit Suggested lifting chain is a 7mm 4 leg sling which is available from Mabey Hire Limited Product code PSP 155 SH with weight 24Kg Refer to Lifting Chain user guide for further information Imperial Sized PLates Metric Sized Plates Tolerance on plan size is 11 L and W i e An 8 x4 plate may be up to 8 11 x4 11 Ww 2No Sy Lifting SS Points IN Nominal Max MS Dims Weight Thickness Code Lx W m _ Kg RDPL1020 2 0x1 0 310 RDPL1225 2 5x1 25 490 RDPL1535 3 5x1 5 820 RDPL2012 2 0x1 25 393 Thickness T varies Thickness T varies RDPL2025 2 5x2 0 780 between 17 22mm between 17 22mm RDPL2030 3 0x2 0 940 Nominal Max Nominal Max RDPL2530 3 0x2 5 1175 Dims Weight Dims Weight RDPL4020 4 0x2 0 1260 Code _ L x W ft Kg Code L x W ft _ Kg RDPL4025 4 0x2 5 1570 RCP4X3 4 x3 320 RCP8X3 8x3 576 Heavy Duty Road Crossing Plates RCP4x4 4 x4 400 RCP8xX4 _ 8x4 720 HDPL1527 2 75x1 5 810 25 RCP5X3 _5 x3 384 RCP8X5 __8 x5 864 HDPL2712 2 75x1 2 673 25 RCP5X4 _5 x4 480 RCP8X6 _8 x6 _ 1008 HDPL2720 2 7x2 0 1078 RCP5X5 __5 x5 576 RCP9X3 _9 x3 640 HDPL2727 2 7x2 7 1482 RCP6X3 __6 x3 448 RCP9X4 _9 x4 800 HDPL3020 3 0x2 0 1176 RCP6X4 6 x4 560 RCP9X5 9 x5 960 HDPL3025 3 0x2 5 1470 RCP6X5 _6 x5 672 RCP9X6 _9 x6 _ 1120 Anti Skid Plate RCP6X6 _6 x6 784 RCP10X3
3. 1 part 4 Radius 1 2 length of unit X 7 2 Method of Installation Dismantling is the reverse procedure Simply crane into position onto the previously prepared foundation When in position ensure units are adequately restrained against movement Install asphalt toe ramps or similar if required Install kerbs or handrails as appropriate In Service Checks Regularly inspect the trench walls to ensure the trafficked units are not overloading them Check that the units are not moving longitudinally or laterally General Since our policy is one of continual improvement components may vary in detail from the description given in this publication Page 2 of 2
4. product user guide Cicurr Introduction This user guide is intended to provide basic information for users of Mabey Hire Road Crossing Plates Mabey Road Crossing Plates are intended to provide temporary vehicular access over narrow trenches and small manholes They are not intended for other purposes In all applications the user should ensure that the sides of the trench to be crossed are adequately shored to support the reactions from the Road Crossing Plates when under service loading The user should also ensure that the units are adequately restrained against longitudinal or lateral movement In certain applications the user may have to make his own separate arrangements for adequate handrails kerbs Code of Practice for Safety at Street Works and Road Works The above code of practice states that road crossing plates being used for street works or road works should have a skid resistant surface Mabey Hire Limited have road crossing plates available with an anti skid surface listed separately in the tables below These plates should only be used for street road works applications and NOT off road or where tracked vehicles are in use Design No information on design is included in this publication Users may need to employ a competent engineer to confirm that the plates are suitable for their application 4 Identification Sizes and Weights of Units Road Plates are available in two types Imperial sized and Metric Sized The code
Download Pdf Manuals
Related Search