Shure PA213 PA214 PA215 User Guide English
Contents
1. PA213 PA214 PA215 Instructions PA213 PA214 PA215 Splitter Cables The PA200 series splitter cables enable you to split the signal from your instrument so you can connect it directly to the P2R and continue to send the same signal to the wireless system already in use This allows you to control the level of your instrument in your personal mix on stage in the P2R without being in proximity to the P2T and without being dependent on a sound engineer The splitter cables also enable you to add an element to your personal mix via the P2R in addition to two channels of audio transmitted from the P2T For example a singing bassist can have the band mix and his or her vocal microphone signals transmitted from the P2T while adding the bass signal directly into the P2R This way he or she can control the bass level in his or her p ersonal mix independently of the signal being sent to the wireless receiver PA213 Connects instruments that use 1 4 connectors to a T1G bodypack transmitter PA214 Connects instruments that use 1 4 connectors to all Shure bodypack transmitters excluding the T1G PA215 For lavalier headset or instrument mics that connect to all Shure bodypack transmitters excluding the T1G NOTE Shure does not recommend using these splitter cables with an electric guitar or any other instrument that is routed through effects processors IMPORTANT In order to protect your hearing follow the recommended steps below befo2. acific Shure Asia Limited Phone 852 2893 4290 Fax 852 2893 4055
3. re inserting earphones into your ears To interconnect a PA200 series splitter cable between your instrument a P2R and a bodypack transmitter 1 Connect your instrument or microphone to the splitter cable input 2 Connect the 1 4 trs plug of the splitter cable to the P2R MIX IN jack 3 Connect the remaining splitter cable plug 1 4 or TA4F to the bodypack transmitter 4 Set the MIX IN GAIN switch on P2R to LO and turn the splitter cable preamp level control all the way to Turn the bodypack transmitter on and turn P2R on just past the click Keeping the volume low Insert the earphones into your ears Add a mix to P2T and confirm reception of the mix to the P2R indicated by the P2R RF LED Slowly raise the P2R volume to a comfortable level Adjust the preamp volume control toward to add your instrument or microphone to your personal mix NOTE If more gain is needed turn the splitter cable preamp volume down and set the P2R GAIN switch to HI OONN Certification Elligible to bear CE Marking SHWRrRE Conforms to European EMC Directive 89 336 EEC SHURE Incorporated http www shure com United States Canada Latin America Caribbean 5800 W Touhy Avenue Niles IL 60714 4608 U S A Phone 847 600 2000 U S Fax 847 600 1212 In l Fax 847 600 6446 Europe Middle East Africa 2005 Shure Incorporated X Shure Europe GmbH Phone 49 7131 72140 Fax 49 7131 721414 27B8824 Rev 2 Asia P
Download Pdf Manuals
Related Search