VMS2 user guide - AMT Composites
Contents
1. Richmond VMS2 user guide Aerovac PLEASE READ THESE INSTRUCTIONS FULLY PRIOR TO USE VMS2 can be used in individual strips or assembled into networks To use VMS2 1 Cut strips to desired length and network configuration and apply onto the laminate securing with suitable flash tape where required 2 Seal the open ends of the VMS2 strip with VMS2TAPE 3 Cut a small hole approx 25mm diameter in the centre of the VMS2 strip for the VMS2PORT taking care not to damage the non porous membrane or mesh A minimum of 1 port per 50m of VMS2 is required 4 Locate the VMS2PORT over the hole and seal around the port flange with sealant tape 6 Apply a square of sealant tape around the hole Aerovac Systems Ltd Aerovac Systems Italy S r l Aerovac Systemes France Richmond Aircraft Products www aerovac com www aerovac it www aerovac fr www richmondaircraft com Aerovac Systems Ltd All statements technical information and recommendations contained in this publication are based on tests believed to be reliable but their accuracy and or completeness are not guaranteed The user shall determine the suitability for this particular purpose and shall assume all risk and liability in connection herewith All values stated are nominal For further details about tolerances please contact Aerovac Systems quality department Revised September 2010 Richmond VMS2 user guide Aerovac 7 Apply a second strip of VMS2. 2 over the hole and seal to the sealant tape a 8 Apply the vacuum bag 9 Cut holes in the vacuum bag for the vacuum hoses 10 Apply a small strip of sealant tape around the bottom of the 12mm vacuum hose 11 Push the vacuum hose into the VMS2PORT ensuring the hose sits flush with the shoulder located half way up the hole of the port and DOES NOT sit on the base of the VMS2PORT The sealant tape will self seal to the top of the VMS2PORT a 12 Seal the vacuum bag around the hose where it has been inserted into the VMS2PORT ensuring that no leaks are present 13 Apply vacuum and carry out a leak test Aerovac Systems Ltd Aerovac Systems Italy S r l Aerovac Systemes France Richmond Aircraft Products www aerovac com www aerovac it www aerovac fr www richmondaircraft com Aerovac Systems Ltd All statements technical information and recommendations contained in this publication are based on tests believed to be reliable but their accuracy and or completeness are not guaranteed The user shall determine the suitability for this particular purpose and shall assume all risk and liability in connection herewith All values stated are nominal For further details about tolerances please contact Aerovac Systems quality department Revised September 2010
Download Pdf Manuals
Related Search