VCC-10 User Guide
Contents
1. VCC 10 User Guide Vax Commercial Careline UK 0844 375 4275 vaxcommercial co uk Machine Overview 1 Extension tubes 2 Lid retaining clips 3 Combination floor tool 1 4 Rear wheels 5 Rear cord hook 6 Power cord 7 Post motor exhaust 8 On off switch 19 9 360 rotating castor wheels 10 Flexible hose 11 Carry handle 12 Cloth pre motor filter 13 Foam pre motor filter 14 Dust bag INFORMATION The accessories are stored in the dust bag compartment and need to be removed before e operating the vacuum cleaner Operation WARNING Always switch off and unplug your vacuum cleaner from the electrical socket before carrying opening emptying or conducting maintenance or troubleshooting checks on the machine Always switch off and unplug your vacuum cleaner from the electrical socket when connecting disconnecting the attachments PLEASE READ SAFETY INFORMATION BEFORE USE PAGE 9 Assembling your vacuum cleaner Unclip the locking clips and Remove accessories and Slide dust bag opening over hose remove lid dust bag inlet and ensure it is secure bA ooo JOL Replace lid by aligning handle To lock lid in place ensure clips Align hose and turn clockwise with rear parking slot and are pressed down fully and flush until secure hose outlet with surface Operation Push together the two metal extension tubes and attach the hose and floor head SERD f2. D floors To clean carpets push the switch To clean hard floors push the forwards switch backwards vaxcommercial co uk Press power button once to turn After use loop power cord in hand on machine and store on rear hook To store hook the floor head into the parking slot Operation NOTE The machine will not function properly unless the cord is secured in the retaining clip CAUTION Do not lift or pull the machine by the power cord Maintenance WARNING Always switch off and unplug your vacuum cleaner from the electrical socket before carrying opening emptying or conducting maintenance or troubleshooting checks on the machine Always switch off and unplug your vacuum cleaner from the electrical socket when connecting disconnecting the attachments Cleaning the cloth pre motor filter quick clean Raise the locking clips and lift lid For a quick clean simply use a soft brush to remove debris from the pre motor filter Cleaning the cloth pre motor filter deep clean For a deeper clean remove the filter and use a soft brush to clean Align arrows to secure filter back both sides into lid l CAUTION Do not wash the filter as this will damage the medium Maintenance Cleaning the foam pre motor filter Remove the pre motor filter Rinse under cold water Leave to fully dry in natural sunlight A N WARNING Avoid direct heat sources as these will damage the filter Filter repla
3. cal Authority or retailer for recycling advice Z Vax Careline UK 0844 375 4275 COMMERCIAL Vax Ltd Kingswood Road Hampton Lovett Droitwich Worcestershire WR9 OQH UK email infod vaxcommercial co uk website vaxcommercial co uk Version 1 0 Performance is everything
4. cement To maintain optimum performance check filters whenever you replace the dust bag Replace the filters if they become damaged or discoloured Cleaning the combination floor tool To maintain optimum performance regularly inspect and clean the combination floor tool To do this place the floor tool in hard floor mode and remove any hair or fibres from the bristles Checking castors and wheels To help maintain the smooth movement of the machine regularly check the front castors and rear wheels and remove any hair or fibres Vax Careline UK 0844 375 4275 WARNING To reduce the risk of personal injury unplug the vacuum cleaner from mains supply before performing maintenance troubleshooting checks Is there an accessory missing e Check the Machine Overview page 2 to make sure the part is definitely included in your unit e f it is missing we re here to help Simply call us on 0844 375 4275 Why will the vacuum cleaner not run e t may not be plugged into the electrical outlet correctly Ensure that the plug is pushed into the electrical outlet securely e The electrical outlet may not be working If unsure consult an electrician e The motor thermostat may have tripped Switch off and unplug the vacuum cleaner Leave for one hour before switching the vacuum cleaner back on Why won t the vacuum cleaner pick up e Dust bag may be full or incorrectly installed remove the dust bag from the unit and if n
5. ot full re attach as shown on page 3 e The filter may be clogged refer to Maintenance Cleaning the filters on page 6 and 7 e The filter may not be fitted correctly refer to Maintenance Cleaning the filters on page 6 e There may be a blockage in the tube or hose Disconnect the hose from the vacuum cleaner carefully remove any blockages found and reconnect securely Why won t the accessories pick up properly e Accessories may not be attached securely ensure tools are fitted correctly as shown on page 4 e Accessory may be blocked remove accessory from handle tube and carefully remove blockage and re attach to the vacuum cleaner Why is dust escaping from the vacuum e The filter may be clogged refer to Maintenance Cleaning the filters on page 6 and 7 e The dust bag may be full remove the bag and if full fit a new bag as shown on page 3 e Dust bag may be incorrectly installed remove the dust bag from the unit and re attach as shown on page 3 e The hose may not be installed correctly remove and refit as shown on page 3 What do do if the unit an accessory becomes damaged or broken e We re here to help Simply call 0844 375 4275 or visit vaxcommercial co uk vaxcommercial co uk General Safety Information When using the vacuum cleaner basic safety precautions should always be observed including the following 1 Ensure that the unit is disconnected from the mains supply
6. prior to assembling disassembling any part of the machine 2 Do not pull lift or carry by the cord Do not close a door on the cord or pull the cord around sharp edges or corners Keep the cord away from heated surfaces This appliance should be used and or stored in dry environments only 4 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety 5 Use only as described in this manual Use only the manufacturer s recommended attachments 6 Regularly examine the cord for damage such as cracking or ageing If damage is found replace the cord with a genuine Vax part before further use See p10 for details 7 Do not use the vacuum cleaner if it has been dropped damaged left outdoors or dropped into water Return the vacuum cleaner to a Vax Authorised Service Agent for examination repair or adjustment Call 0844 375 4275 for your nearest service centre 8 Do not handle the plug or vacuum cleaner with wet hands 9 Ensure airways remain clear of blockages during use for best performance 10 Keep hair loose clothing fingers and all parts of the body away from openings and moving parts 11 Do not pick up hot smoking burning flammable hazardous or combustible materials or use in the presence of explosive liquids or vapours 12 Do not vac
7. to 5 00pm Any queries or concerns about using your Vax call the Vax Commercial Careline Calls are charged at the UK local rate Please make a note of the serial number and model number of the vacuum cleaner before calling For the nearest Service Agent please call the Vax Commercial Careline or visit vaxcommercial co uk Consumables To purchase spares and accessories please visit vaxcommercial co uk Crevice Tool 1 131557 00 Dusting brush 1 1 131558 00 2 5m Hose 1 131559 00 Metal 2 pc extension tube 1 1 131561 O00 Filter Kit Type 41 1 131645 00 Multifunction head 1 131884 00 Turbobrush 9 126067 00 Hard floor Tool 1 125784 00 Paper Bags x10 1 1 131644 00 Cloth Bags x10 1 131645 00 Technical Specification Voltage 220 240V 50Hz Wattage 1200W Capacity JL Filters Cloth pre motor filter Foam pre motor filter Foam post motor filter Cord length 10m Weight 5 2kg Subject to technical change without notice vaxcommercial co uk Other Information CE EEC Statement of Compliance Manufacturer EEC importer Vax Limited hereby on our own responsibility declare that the VCC 10 series is manufactured in compliance with the following Directives Safety 2006 95 EC Low Voltage Directive EMC 2004 108 EC Electromagnetic Compatibility Directive Disposal Disposal Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Lo
8. uum up harmful or toxic material chlorine bleach ammonia drain cleaner etc 13 Do not vacuum up hard or sharp objects such as glass nails screws coins etc 14 Do not use without the filters in place 19 This appliance is suitable for commercial use for example in hotels schools care homes factories shops offices and rental businesses 16 This appliance is not suitable for picking up up hazardous dust including but not limited to any material listed by ECD 79 831 EEC any material to which exposure is limited by local government and any micro dust which may be dangerous to health 17 This appliance is for dry use only and is not to be used or stored outdoors and or in wet conditions bo CAUTION Before plugging the cord in make sure the machine is switched off position Hold the vacuum cleaner firmly when plugging in and turning on PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Motor Thermostat IMPORTANT The motor is equipped with a thermal cut out If for any reason the vacuum cleaner should over heat the thermostat will automatically turn the unit off Should this occur unplug the vacuum cleaner clean the filters and allow the cleaner to cool for approximately one hour To re start plug in the machine and switch on Vax Careline UK 0844 375 4275 Machine Overview Service amp Help Vax Commercial Careline UK 0844 375 4275 Monday Friday 8 30am to 6 30pm Saturday 9 00am
Download Pdf Manuals
Related Search