GMN02BT Mini Stereo System User Guide
Contents
1. Frequency Used to enter a specific FM frequency REPEAT Repeat current track or all tracks REP AB Repeat segment between two points CD RIP Store tracks from the current CD on a USB device SEARCH Search for radio stations SAVE Store current radio station in memory MO ST Switches the stereo on or off in FM mode PLED Switch the LED around the volume dial on or off RANDOM Switch the random CD track selection on or off PROGRAM Set the Mini Stereo System to only play preselected tracks on a CD CH and CH Channel up and down ENTER Select channel track or option TU and TU FM Tuning up and down DSP Switch between different sound types e g pop jazz ox Mute the volume Fast forward Rewind bi Play Pause Stop kil Skip to beginning of next track 44 Skip to beginning of previous track BASS BASS Adjust the bass up or down TREBLE TREBLE Adjust the treble up or down VOL VOL Adjust the volume up or down 2772588888888888888888 98 C To switch the Mini Stereo System on set the POWER switch on the back of the base unit to ON Io switch from Standby press the 5 button on the remote control or the one on the front of the stereo To switch to Standby press the 5 button on the remote control or the one on the front of the stereo Q To switch the Mini Stereo System off set the POWER switch on the back of the base uni2. 200 W x 300 H mm Unit Weight 12 kgs bad This appliance is labelled in accordance with European Directive 2002 96 EG concerning used electrical and electronic appliances Waste Electrical and Electronic Equipment WEEE The guideline determines the framework for the return and recycling of used appliances Your hearing is very important to you and to us so please take care when using this Mini Stereo System It is strongly recommended that you follow the listed guidelines in order to prevent possible damage or loss of hearing Establish a safe sound level Over time your hearing will adapt to continuous loud sounds and will give the impression that the volume has in fact been reduced What seems normal to you may in fact be harmful To guard against this before your hearing adapts set the volume to a low level Slowly increase the level until you can hear comfortably and clearly and without distortion Damage to your hearing is accumulative and is irreversible Any ringing or discomfort in the ears indicates that the volume Is too loud Once you have established a comfortable listening level do not increase the sound level WARNING THIS PRODUCT UTILISES A CLASS 1 LASER USE OF CONTROLS ADJUSTMENTS OR PROCEDURES NOT LISTED IN THIS USER GUIDE MAY RESULT IN HAZARDOUS RADIATION EXPOSURE General safety This Mini Stereo System has been designed and manufactured to meet European safety standa
3. Brown 17 660 Ce The Mini Stereo System is guaranteed for twelve months from the date of original purchase If any defect should occur due to faulty materials or workmanship contact Goodmans via the website www goodmans co uk Have your receipt of purchase on hand The guarantee is subject to the following provisions e It is only valid within the boundaries of the country of purchase e The product must be correctly installed and operated in accordance with the instructions contained in this User Guide e The Mini Stereo System must be used solely for domestic purposes e The guarantee will be rendered invalid if the Mini Stereo System is re sold or has been damaged by inexpert repair e The manufacturer disclaims any liability for incidental or consequential damages e The guarantee is in addition to and does not diminish your statutory or legal rights 19 Goodmans www goodmans co uk DCS JUN13 GMNO2
4. example for track number 15 press the 1 and then the 5 While using the FM radio press the T F button then use the number buttons to select a frequency in the format nnn nn For an example of entering a frequency see Direct Entry on page 10 Press the DSP button on the remote control to select the different sound fields Jazz Rock Classic Pop Live Dance and off cC 25 You can program the Mini Stereo system to play selected tracks from a disc in the order you prefer For example you could program the system to play tracks 03 12 05 and 01 in that order The disc must be in the CD tray and must be stopped To program the required tracks Q Press the PROGRAM button Enter the number of the first track you wish to play e g 3 Repeat step 2 for each of the tracks you want to program When you have finished programming tracks press the ENTER button to start playing the tracks in the programmed order 6 Io cancel programmed play press the W button once This function is used to store tracks from a disc to a USB device To store the required tracks Press the CD RIP button to enter CD ripping mode The screen displays UD RP Press to select the ripping speed lt NORMAL gt or lt HIGH gt When you have selected the speed the Mini Stereo System enters ready ripping status Use the number keys to select each of the tracks you want to rip The screen displays RiPn
5. or needles Do not install the Mini Stereo System Do not expose the batteries in the direct sunlight or near heat sources remote control to excessive heat such such as radiators stoves or other as fire or direct sunlight appliances which produce heat Do consult your dealer if you are ever in Do not allow the power cord to be doubt about the installation operation walked on or pinched or safety of your Mini Stereo System Do not use the Mini Stereo System if the power cord is frayed or cracked or the plug is damaged Unplug the Mini Stereo System during a thunderstorm or if it will be unused for a long period of time When unplugging the Mini Stereo system do not pull the cable to remove the plug Store the Mini Stereo System in a clean dry environment Clean the Mini Stereo System only with a damp cloth Do not remove any fixed covers as this may expose you to dangerous voltages When replacing the batteries in the remote control make sure that you use the same size and type Electrical information The mains lead supplied with this Mini Stereo System is fitted with a BS1363 A 13 amp plug If it is not suitable for your supply sockets it must be removed and replaced with an appropriate plug If the plug becomes damaged and or needs to be replaced please follow the wiring instructions below The plug removed must be disposed of immediately It must not be plugged into a supply socket as this will be an e
6. the Mini Stereo System Base Unit Note that the end of the aerial has a hole which can be used with a drawing pin to pin the aerial to a board or wall if required 5 Connect the power cable to the mains power 6 Insert two AAA batteries into the remote control You can now begin enjoying your new Mini Stereo System je W 111111 11111 w 111111 1 1 MOIMI e an Your Mini Stereo System INDIGATOR DISPLAY REMOTE LIGHT SCREEN CONTROL 9 9 SENSOR ON STANDBY e 1 OPEN CLOSE a CD TRAY PLAY PAUSE STOP FUNCTION TONE SEARCH DSP REWIND e FORWARD PREVIOUS NEXT CD TRAY VOLUME CONTROL 6 e AUX IN USB PORTS 3 PORT Your Mini Stereo System 111 VENTILATION Pi Slots AUDIO OUT SPEAKER Ports Connec tions an Your Mini Stereo System Buttons on the Remote Control 4 Switches the Mini Stereo System on or to standby A Opens and closes the CD drawer CD Switches the Mini Stereo System to CD mode BT Switches the Mini Stereo System to Bluetooth mode FM Switches the Mini Stereo System to FM radio mode AUX If you have connected an external device via the AUX IN ports this switches to the external device USB Switches the Mini Stereo System to USB mode 0 9 Number keys for selecting tracks or preset radio stations T F
7. Discs To remove a disc from its storage case press down on the centre of the case and lift the disc out Hold the disc by the edges to avoid touching the recorded side of the disc Fingerprints and dust should be carefully wiped from the disc s surface with a soft cloth CDs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles Wipe in a straight line from the inside to the outside of the disc Small dust particles and light stains should have no effect on reproduction quality Never use chemicals such as record sprays antistatic sprays benzine or thinners to clean the discs These chemicals can irreparably damage the disc s surface Discs should be returned to their cases after use This avoids serious scratches that could cause the laser pickup to skip Do not expose discs to direct sunlight high humidity or high temperatures for extended periods Exposure to high temperatures can warp the disc Do not stick paper or write anything with a ball point pen on the label side of the disc 13 3 Technical Specification Model Number GMNO2BT Power Supply 220 240V AC 50Hz 2 x AAA 1 5V batteries for remote control Signal Output Audio Stereo 1 2V RMS S N Ratio for Audio Signal gt 80dB Weight A Operating Conditions Temperature 5 C 35 C tics Unit Dimensions Main unit 335 x 220 W x 300 H mm speakers each 320 D x
8. Goodmans GMNO2BT Mini Stereo System User Guide IMPORTANT Please read all instructions carefully before use and keep for future reference Introduction Safety is important Use of any electrical equipment should be undertaken with care Please read the safety section on page 15 before using your Mini Stereo System This appliance is for household use only What s in the box If any of the following items are missing or damaged please contact the customer support team e Mini Stereo System Base Unit e 2 Speakers e 1 Remote Control e 1 Mains Power Cable e 1 Audio Cable e 1 FM Antenna SERING L e btn ai 3 Care and Maintenance 17 Your Mini Stereo System 4 Technical Specification 14 Dally ON oooooo 1 WAaFNINgS o oooooo 15 Using the FM Radio 10 Electrical Information 17 Using Bluetooth 11 111 Guarantee 5889 18 Troubleshooting 12 1 Unbox your Mini Stereo System and check that you have all the necessary components 2 Place the Mini Stereo System Base Unit on a sturdy level surface or stand If it is placed on a shelf the shelf must be capable of holding at least 12 kg 3 Place the speakers on the same surface and connect the speaker cables to the back of the Mini Stereo System Base Unit 4 Connect the aerial to the aerial socket and extend the aerial away from
9. is not plugged 1 Ensure the plug is plugged into the wall socket into the wall socket 2 The wall socket is not 2 Turn on the power at the wall turned on socket 1 The batteries have been exhausted 1 Replace the batteries 2 Aim the remote control at the Remote control does not work Cannot play CD 2 The remote control is not pointed at the sensor 3 The remote control is too far from the sensor or obstructions are blocking the signal 1 There is no CD inserted 2 The CD is incorrectly inserted 3 The CD is not compatible with this Mini Stereo System sensor Move closer to the sensor or clear any obstructions between the remote control and the sensor Insert a CD Ensure the CD is correctly loaded into the CD Tray with the label upwards Use only discs that are compatible with this device There is no sound from the speakers CD Sound Skips Noise or sound distorted on radio 12 1 Ihe audio wires are not connected properly 2 The volume is on the minimum setting 1 The CD is dirty 2 The CD is warped or scratched 1 The station 15 not correctly tuned 2 aerial is not connected or extended Connect the audio wires correctly Increase the volume Clean the CD with a soft cloth 2 The CD should be replaced Retune the radio station Check the aerial connection and extend it fully Handling
10. lectrical hazard If the fuse needs to be replaced it must be of the same rating and ASTA approved to BS1362 If the plug is changed a fuse of the appropriate rating must be fitted in the plug adapter or at the distribution board If the fuse in a moulded plug is replaced the fuse cover must be refitted before the appliance can be used Wiring instructions The supply cable will be either 2 core or 3 core Follow the appropriate wiring instructions given below In both cases ensure that the outer sheath of the cable is firmly held by the cable clamp 2 Core plug 3 Core plug AX WARNING Do not connect either wire A WARNING This appliance must be earthed to the earth terminal The wire coloured green and yellow must be This symbol indicates that this 2 core appliance connected to the terminal marked with the letter E or is Class Il and does not require an earth by the earth symbol Di or coloured green or green connection and yellow The wire coloured blue must be connected to the The wire coloured blue must be connected to the terminal marked with the letter N or coloured black terminal marked with the letter N or coloured black The wire coloured brown must be connected to the The wire coloured brown must be connected to the terminal marked with the letter L or coloured red terminal marked with the letter L or coloured red EARTH Green amp Yellow y NEUTRAL 3 NEUTRAL 5 BT Bius os Brown Bius as di
11. nY where nn is the track number When you select the first track the display skips to the next ripping interface lt RIPnnY gt Io cancel the track you have selected or delete a selected track enter the track number again The screen displays lt RIPnnN gt and the selected track is cancelled Io select all tracks press the T F button To cancel all tracks press the T F button again When you have finished selecting tracks press the ENTER button to begin ripping tracks The selected tracks will be copied to a new folder on the USB device While the Mini Stereo System is ripping the selected tracks the screen displays the ripping track numbers at the second number 5 If you selected normal ripping speed the Mini Stereo System will play the tracks When ripping is complete the screen displays lt CD RIP gt and the tracks stop playing Io stop ripping at any time press the STOP button twice Press the button to start playback from the beginning Example To rip the 5th and 13th tracks to a USB device first press the STOP button to stop playback Then press the CD RIP button Press 0 and 5 the screen displays lt RIPO5Y gt Press 1 and 3 the screen displays lt RIP13Y gt Finally press the ENTER button to begin ripping the selected tracks 04 Using the FM Radio 10 To use the FM radio press the FM button on the remote control Before using the FM radio you m
12. ncy Press the SAVE button to save it Use the number buttons or the CH CH buttons on the remote control to select the memory slot containing the frequency for the required radio station Using Bluetooth an Q Press the BT button on the remote control to enter Bluetooth mode The Indicator light flashes blue If you are playing music through a Turn on the bluetooth function on phone and you receive a call the music your device e g mobile phone will stop automatically Place your device in Bluetooth When the call ends it depends on search mode the setting of your phone whether the Select GMNO2BT from the list of current track will resume playback or found devices not Select OK or YES to pair the unit with your Bluetooth device If prompted enter 0000 for the pass key When successfully paired with your device the bluetooth indicator light flashes steadily The playback operation is control by your device and the buttons on the remote control or on the front panel of the Mini Stereo System Note Some devices connect immediately after pairing while some may take longer to complete the connection The Mini Stereo System can only be connected and playing content from one Bluetooth device at a time To connect to a different paired device turn off Bluetooth or unpair from the currently paired device and manually connect to the other device 11 go Troubleshooting No power 1 The plug
13. rds but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured Do read these operating instructions before you attempt to use the Mini Stereo System Do ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made in accordance with the manufacturer s Instructions Place the Mini Stereo System ona sturdy level surface or stand If it is placed on a shelf the shelf must be capable of holding at least 12 kg Take care when lifting or moving the Mini Stereo System Switch off and remove the mains plug when making or changing any connections 15 Do not continue to operate the Mini Do not use new and old batteries Stereo System if you are ever in doubt together When replacing the batteries about it working normally or if it is in the remote control replace them damaged in any way Switch it off both at the same time withdraw the plug from the mains and When replacing the batteries in the consult your dealer remote control make sure that you Do not obstruct the ventilation vents on insert them the correct way round The the Mini Stereo System for example correct way Is marked inside the battery with curtains or soft furnishings compartment Do not allow electrical equipment to be Do not drop anything into the unit such exposed to rain or moisture as coins hairpins
14. s to resume the previous volume level While playing a track press the button to stop the playback Press the PI button to play the CD CD R or USB device from the beginning While playing a disc press the or button to fast forward or fast rewind Press either button multiple times to cycle through the following options e Speed x1 Speed x2 e Resume normal speed While playing a disc press the button to skip to the beginning of the next track if you are at the final track it will stop playback While playing a disc press the Hd button to skip back to the beginning of the previous track if you are at the first track it will stop playback In any modes you can adjust the volume bass and treble by pressing the tone buttons on the remote control For example press the BASS or BASS buttons to adjust the bass up or down 6 3 Cl While you are playing tracks from a CD CD R or USB device you can repeat the track that Is currently playing or all the tracks using the REPEAT button Press the REPEAT button multiple times to cycle through the following options e REPEAT to repeat the current track e REPEAT ALL to repeat all tracks on the CD CD R or USB device e OFF to switch off the repeat function While playing a disc press the RANDOM button to play the tracks ina random order While playing a disc press the number buttons to select a track to play For
15. t to OFF When you switch from standby the Mini Stereo System remembers the mode it was in last time it was used To change modes press the following button on the remote control e CD to enter CD mode e FM to enter radio mode e BT to connect to an external device using Bluetooth e AUX to connect to an external device using the AUX IN ports e USB to enter USB mode if you have a USB device connected Press the PLED button on the remote control to switch the LED light on the front panel of the Mini Stereo System on or off Press the A button on the remote control or the one on the front of the stereo Insert a CD in the CD tray with the CD label facing up Press the A button or the PI button on the remote control or the one on the front of the stereo again The CD will automatically begin playing at track 1 While playing a track press the l button to pause the playback Press the Pel button again or press the ENTER button to resume the playback Q lo increase the volume rotate the VOLUME DIAL on the front of the Mini Stereo System clockwise or press the VOL button on the remote control lo decrease the volume rotate the VOLUME DIAL on the front of the Mini Stereo System anticlockwise or press the VOL button on the remote control You can also press the OK button on the remote control to mute the volume Press the YA button again or use the volume dial or button
16. ust first extend the aerial a vertical position is recommended This ensures that the maximum signal strength is available when the radio begins to scan Extending the aerial also ensures the best possible sound guality Automatic Scanning Press the SEARCH button The Mini Stereo System begins searching for radio stations Any radio stations are saved automatically To stop an automatic search press the SEARCH button again Manual Search Press and hold the TU or TU buttons to search up or down the freguency range Once a radio station with sufficient reception has been found the scan will stop You can then save the radio station or start 8 new search Direct Entry If you know the frequency of the radio station you want you can press the T F button then use the number buttons to select a frequency in the format nnn nn For example for FM 109 70 press the 1 then the 9 then the 7 and finally the 0 When you enter frequencies above 100 pressing 1 displays as 10 i e the zero is defaulted in There are 60 available memory slots in your Mini Stereo System When you have located a radio station you can press the SAVE button to save it into the next empty memory slot If you want to assign a station to a particular memory slot Use the number buttons or the CH CH buttons to select the required memory slot Press the T F button then use the number buttons to select the required freque
Download Pdf Manuals
Related Search