User Guide
Contents
1. Protect the device from excessive moisture bathing swimming heat radiator car dashboard and direct contact with skin when sweating workout fitness sport X ray radiation CT or MRI scans may destroy or adversely affect the correct functioning of the device Do not use excessive force when connecting your device to its different cables Protect all openings microphones audio input and charger from dirt and debris If the device has been dropped or damaged if it overheats during charging has a damaged cord or plug or has been dropped into liquid stop using your device and contact your hearing care professional The device has a built in rechargeable battery This battery can be charged and discharged hundreds of times but may eventually wear out The battery may then only be replaced by authorized personnel 46 8 4 Other important information m Persons with pacemakers or other medical devices should ALWAYS consult their physician or the manufacturer of their device BEFORE using the device The use of the device with a pacemaker or other medical devices should ALWAYS be in accordance with the safety recommendations of the physician responsible for your pacemaker or the pacemaker manufacturer m Device collects and stores internal technical data This data may be read by a hearing care professional in order to check the device as well as to help you use your device correctly m he digital sig2. 37 Indicator light multiple microphone status When using multiple Roger microphones the following feedback may be given by the indicator light Indicator light Meaning m mp Your Roger microphone is muted Unmute it by pressing the on off button O O Your Roger microphone cannot detect the primary Roger microphone Switch on the primary Roger microphone and make sure it is within range of your Roger microphone Alternatively if you don t want to use your Roger Clip On Mic in a microphone network press 7 seconds on the connect button until the LED turns orange After that you have to reconnect the Roger Clip On Mic with your Roger receiver s 38 Troubleshooting Most probable cause s Solution s cannot switch Roger Clip On Mic on m The battery is empty m Charge Roger Clip On Mic for at least two hours cannot understand the speaker m The microphone is not m Move Roger Clip On Mic positioned correctly closer to the speaker s mouth m Make sure Roger Clip On Mic is pointing towards the speaker s mouth m The microphone openings are m Make sure the microphone covered by fingers or clothing openings are not covered by fingers clothing or dirt cannot hear the speaker s voice even though Roger Clip On Mic is switched on m The microphone has been m Check the indicator light if muted it is violet briefly press the on off button to activate the microphones m Your h
3. Connecting the power supply to the docking station 1 Place the docking station next to your TV audio device and connect the smaller end of the charging cable to the power input of the docking station w 2 Plug the larger end of the charging cable into the universal power supply 3 Plug the power supply into an easily accessible power socket Type GPE053B 5V 1A 3 Getting started Connecting the docking station to a TV audio device 1 Plug the audio cable into the audio input of the docking station soe 2 Connect the other end of the audio cable to the headphone output of your TV audio device Alternatively connect the other end of the audio cable to your TV s Cinch RCA adapter Connect the red and white plugs to the matching red and white output sockets on your IV You can also connect via a SCART adaptor which can be bought from an electronics store or from your Phonak dealer Connect the other end of the audio cable to the SCART adapter Then plug the SCART adapter into a free SCART output socket on your TV oS Tooo i lt j A If your TV does not include an analog audio output you need a digital to analog converter Such converters can be found in electronics stores or may be purchased from your Phonak dealer 13 When the docking station is plugged into the headset socket of your TV you can adjust the volume via your TV s remote control
4. microphone which is no to make Roger Clip On Mic a longer available standalone transmitter again The Roger Clip On Mic s light is blinking red double flash m Charge Roger Clip On Mic as soon as possible mits battery charge is low Roger Clip On Mic has stopped working m Software issue m Reboot Roger Clip On Mic by simultaneously pressing it s two buttons 41 8 1 Important Safety Information Please read the information on the following pages before using your Phonak device Ef This symbol on the product or its packaging means that it should not be disposed of with your other household waste It is your responsibility to dispose of your waste equipment separately from the municipal waste stream The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health 42 8 2 Hazard warnings A Keep this device out of reach of children aged under 3 years A Opening the device might damage it If problems occur that cannot be resolved by following the guidelines in the Troubleshooting section of this User Guide consult your hearing care professional A Your device should only be repaired by an authorized service center Changes or modifications to this device that were not explicitly approved by Phonak are not permitted A Please dispose of electrical components in accordance with your local regulations Z Do not use your device in area
5. the other Roger microphone is now connected to your Roger Clip On Mic oo Roger Clip On Mic could not find another Roger microphone Move Roger Clip On Mic closer to the other Roger microphone and make sure both microphones are switched on Then try Connect again O O The other Roger microphone is not compatible with your Roger Clip On Mic 35 6 Adding additional microphones 6 2 Using additional microphones Hand over the Roger microphones to your speakers Make sure they are worn properly pointing to the mouth and within 20cm 8 inches Roger Clip On Mics automatically detect when your friend or partner talks before instantly transmitting his her voice to your hearing aids If a speaker wants to temporarily leave the group they should mute their microphone by firmly pressing the on off amp button 36 Only one speaker can be heard at a time When two people speak at the same time the person who talked first will be heard When they stop talking the other Speaker will be heard O The speaker with the primary microphone the one with the y amp sticker on the back should stay within 10m 30 feet of the group If the speaker with the primary Roger Clip On Mic wants to temporarily leave the group he should leave the microphone within the group If the primary Roger Clip On Mic is turned off or moves out of range the secondary Roger microphones will start blinking blue and will stop transmitting
6. Some TVs will switch off their loudspeakers when you plug the jack into the headset socket meaning the TV will not be audible for other people In such a case use the Cinch RCA or SCART output socket as described above The Roger Clip On Mic docking station can also be connected to any other audio device such as an MP3 player PC or HiFi system using the audio cable 3 2 Charging your Roger Clip On Mic Roger Clip On Mic contains a built in lithium polymer battery with fast charge capability To charge your Roger Clip On Mic slot it into the docking station The indicator light turns orange to indicate it is charging An empty battery will reach its maximum charge in approximately 2 hours Charging is complete when the indicator light turns solid green When charging your Roger Clip On Mic for the first time let it charge for at least two hours even if the battery indicator light is not lit or turns green earlier 3 Getting started Alternatively you can also charge your Roger Clip On Mic without the docking station This may be useful when traveling Using the micro USB cable 1 Plug the smaller end micro USB of the charging cable into your Roger Clip On Mic 2 Plug the larger end USB of the charging cable into the power supply 3 Plug the power supply into an easily accessible power socket You can also charge your Roger Clip On Mic by using the charging cable to connect your Roger Clip
7. again to re activate the microphones or audio input Indicator light Mute Indicator light Meaning E B Microphone audio input muted 29 30 5 2 Disconnecting Roger devices NewNet To disconnect your Roger Clip On Mic from any connected receivers or other Roger microphones hold the Connect ced button for 7 seconds The indicator light will turn orange when Roger Clip On Mic has been disconnected from all connected devices You can now re start to connect Roger receivers or Roger microphones with your Roger Clip On Mic 5 3 Verification mode The Verification mode is used by hearing care professionals to verify a device according the Roger POP Roger Phonak Offset Protocol To activate verification mode press the Connect button 5 times in a row Status light Verification mode Indicator light Meaning 000000 Verification mode activated Verification mode can only be activated during the 60 seconds after Roger Clip On Mic is switched on When Roger Clip On Mic is switched off Verification mode is automatically deactivated Reset If your Roger Clip On Mic stops responding reset the device by pressing the on off and Connect buttons simultaneously for 7 seconds 31 32 6 Adding additional microphones Roger technology allows you to use multiple microphones in parallel by connecting additional Roger Clip On Mics and Roger Pens 6 1 Connect To connect anot
8. collar clip upwards buttons clip downwards clip sideways Make sure Roger Clip On Mic points towards the Speaker s mouth The distance between Roger Clip On Mic and the Speaker s mouth should not be greater than 20cm 8 inches max 20cm 8 inches Too far away Not pointing towards the mouth 23 4 Using Roger Clip On Mic 4 2 Using the lanyard If it s not possible to clip Roger Clip On Mic to the speaker s clothing you can alternatively use the lanyard to hang Roger Clip On Mic around their neck Attaching the lanyard 1 Press the Roger Clip On Mic clip and slide the plastic part of the lanyard over it 24 To remove the lanyard open the clip and pull the lanyard out 25 Js na R oder C l in Qn N N iC U SITET J IN Og Cr CHR UTN IVIC Hanging it around the neck 1 26 The distance between Roger Open the lanyard by pulling the paiese magnets apart P s Hang the Roger Clip On Mic around the neck of the speaker oN and close the lanyard Adjust the length of the lanyard to bring Roger Clip On Mic closer to the mouth Secure the wire by pulling the cable into the gap Clip On Mic and the mouth max 20cm Should not be more than 8 inches 20cm 8 inches a 4 3 Connecting to multimedia devices You can connect your Roger Clip On Mic to an audio source such as your TV tablet or HiFi to hear its audio signal directly in your hearing ai
9. On Mic to one of your computer s USB ports If you connect the charging cable to your computer s USB port and the docking station at the same time your Roger Clip On Mic will not charge Indicator light battery status Indicator light Meaning om Charging em ops Fully charged C0 CO 00 Low battery charge your Roger Clip On Mic In addition you will hear beeps in your hearing aids 3 Getting started 3 3 Switching on and off To switch your Roger Clip On Mic on press the on off button for one second until the indicator light turns green Indicator light Switching on Indicator light Meaning Powering on O 0 O Switched on 3 4 Using Roger receiver Using Roger MyLink If your Roger receiver is a Roger MyLink switch your Roger MyLink on and hang it around your neck Make sure your hearing aids are set to T MT T Coil mode The Roger MyLink User Guide provides more detailed information on using Roger MyLink Using Roger receivers attached to your hearing aids If you have Roger receivers that attach directly to your hearing aids make sure these are properly attached and each hearing aid is set to Its Roger FM DAI EXT AUX program 20 3 Getting started 3 5 Connecting a receiver Your hearing care professional may already have connected your Roger Clip On Mic with your hearing aids If this is not the case connect your receiver to your Roger Clip On Mic as follow
10. Roger Clip On Mic User Guide BA PHONAK life is on 1 Welcome 2 Getting to know your Roger Clip On Mic 2 1 In the box 2 2 How the Roger Clip On Mic works 2 3 Device descriptions 2 4 Indicator lights LED status 3 Getting started 3 1 Setting up the docking station 3 2 Charging your Roger Clip On Mic 3 3 Switching on and off 3 4 Using Roger receiver 3 5 Connecting a receiver 4 Using Roger Clip On Mic 4 1 Wearing Roger Clip On Mic 4 2 Using the lanyard 4 3 Connecting to multimedia devices co CO N OQ O 10 15 18 19 20 22 22 24 27 Special functions 5 1 Mute 5 2 Disconnecting Roger devices NewNet 5 3 Verification mode Adding additional microphones 6 1 Connect 6 2 Using additional microphones Troubleshooting Important information Service and warranty Information and explanation of symbols 29 29 30 30 32 32 36 39 42 48 50 Congratulations on choosing the Roger Clip On Mic from Phonak This compact microphone uses adaptive wireless transmission to help people with a hearing loss understand more speech in noise and over distance It is ideal for use by a partner or friend plus it includes an audio input for listening to multimedia and TV connectivity It can also be used alongside other Roger Clip On Mics and Roger Pens in a microphone network Your Roger Clip On Mic is a Swiss premium quality product developed by Phonak the world s leading hearing hea
11. ds Via docking station Make sure the docking station is powered properly connected to your audio source as described in Getting started page 12 Slot your Roger Clip On Mic into the docking station After turning on your audio source Roger Clip On Mic will automatically detect the presence of an audio signal and start transmitting it If the docking station is not powered Roger Clip On Mic can still detect and transmit an external audio signal Simply switch Roger Clip On Mic on When Roger Clip On Mic transmits an audio signal its microphone is muted 27 28 4 Using Roger Clip On Mic Via micro USB audio cable Alternatively you can use the short micro USB audio cable to connect your multimedia device directly to your Roger Clip On Mic 1 Roger Clip On Mic must be switched Plug the rectangular Plug the round end of the micro USB audio cable into the headphone output of your multimedia device end micro USB of the micro USB cable into the socket of your Roger Clip On Mic on to transmit the audio signal to your hearing aids After you have activated your multimedia device s audio signal Roger Clip On Mic will detect this signal and will automatically mute its own microphone 5 Special functions 5 1 Mute Firmly press the on off button to mute Roger Clip On Mic s microphone or audio input When muted the indicator light will turn solid violet Press the on off button
12. earing aids are not set to m Check that your hearing aids the correct program are set to the correct program Roger FM DAI EXT AUX m Your Roger receivers are not m Hold Roger Clip On Mic close connected to Roger Clip On Mic to each Roger receiver in turn and briefly press the Connect button 39 7 Troubleshooting Most probable cause s Solution s min case of multiple microphones m Check the indicator light if the primary microphone may it is blinking red switch on not be switched on or may be the primary microphone and out of range check that it is within range keep losing the audio signal m Distance between Roger m Move closer to the Roger Clip On Mic and Roger receiver Clip On Mic is too large m There are obstacles between m Make sure you can see the you and Roger Clip On Mic Roger Clip On Mic line of sight The volume from my multimedia device is too low m Incorrect volume settings m Increase the volume of your audio sourc cannot hear my multimedia device m Ihe audio source is muted m Unmute the audio source m Roger Clip On Mic is using m Switch on Roger Clip On Mic micro USB audio cable but is to listen to the audio source not switched on via the micro USB audio cable 40 Most probable cause s Solution s Roger Clip On Mic s light is blinking blue m Your Roger Clip On Mic has m Create a NewNet press the been connected to another Connect button for 7 seconds
13. her microphone to your Roger Clip On Mic follow these steps 1 Turn on both microphones 2 Decide which Roger Clip On Mic will be your primary device Mark this device by placing the star sticker on the back 3 Hold the two microphones close together within 10cm 4 inches 4 Press the Connect ced button of the microphone with the star sticker The primary microphone that controls the network is the Roger Clip On Mic that you used to connect the additional microphones 0 10cm 0 4 inches gt 5 The indicator lights of both microphones will turn green for two seconds to confirm a successful connection 33 Once you have connected another microphone to your primary microphone it can only be used together with the primary The other microphone will blink blue if it does not find your primary Roger Clip On Mic If you want to disconnect it from your primary Roger Clip On Mic use the NewNet function see chapter Special Functions If you want to connect your Roger Clip On Mic with a Roger Pen it is recommended to press the Connect button of the Roger Pen making that the primary microphone It is possible to connect up to 10 Roger microphones to your Roger Clip On Mic 34 Indicator light Connection status After pressing the Connect button the following feedback may be given by the indicator light Indicator light Meaning Connection was successful
14. icro USB 3 Audio input 3 5mm 1 8 inch jack 2 4 Indicator lights LED status Indicator light Meaning O 0 Switched on a Switching off Audio input detected e p Microphone audio input muted a Charging em os Fully charged 0 00 0000 Low battery charge your Roger Clip On Mic 000 Your Roger microphone cannot detect the primary Roger microphone Switch on the primary Roger microphone and make sure it is within range of your Roger microphone Alternatively if you don t want to use your Roger Clip On Mic in a microphone network press 7 seconds on the connect button until the LED turns orange After that you have to reconnect the Roger Clip On Mic with your Roger receiver s 3 Getting started 3 1 Setting up the docking station The Roger Clip On Mic docking station is used to both recharge the microphone and transmit audio from a TV or other audio device to the Roger Clip On Mic and into your hearing aids Setting up the power supply 1 Select the power adapter that corresponds to your country EF FD US EU UK 2 Insert the round corner of the adapter in the round corner of the universal power supply AUS 3 Click the tail of the adapter in to lock it into place Make sure the adapter is securely locked Remove Change a Pull back the tab on the universal power supply b Gently pull the adapter upwards to remove it c Start over with step 1 above
15. lthcare company Please read this User Guide thoroughly to benefit from all the possibilities your Roger Clip On Mic offers If you have any questions please consult your hearing care professional or local Phonak support center Phonak life is on www phonak com 2 Getting to know your Roger Clip On Mic 2 1 In the box Roger Clip On Mic Docking station Power supply with country adapter and charging cable Star sticker Storage pouch Lanyard Audio cable for docking station Q micro USB audio RCA Cinch adapter Quick Setup Guide cable suitable for for TV or HiFi traveling 2 2 How the Roger Clip On Mic works Roger Clip On Mic transmits the speaker s voice directly into your ears The system consists of three main elements your hearing aids Roger receivers and your Roger Clip On Mic Hearing aid with Roger receiver f Clip On Mic Listener Speaker Your Roger Clip On Mic and your hearing aid typically work within a range of up to 10 meters 33 feet Note that human bodies and walls may reduce this distance The furthest range is possible when you can see your Roger Clip On Mic i e line of sight 2 Getting to know your Roger Clip On Mic 2 3 Device descriptions Roger Clip On Mic Indicator light LED 2 Microphones 3 Charging and audio input micro USB 4 Connect On Off Mute Turnable clip C1 Slot for Roger Clip On Mic 2 Charger input m
16. nal sent from the device to a connected receiver cannot be overheard by other devices which are not in the microphone s network 47 48 9 1 Local warranty Please ask the hearing care professional where you purchased your device about the terms of the local warranty 9 2 International warranty Phonak offers a one year limited international warranty valid as of the date of purchase This limited warranty covers manufacturing and material defects The warranty is valid only if proof of purchase is shown 9 3 Warranty limitation This warranty does not cover damage from improper handling or care exposure to chemicals immersion in water or undue stress Damage caused by third parties or non authorized service centers renders the warranty null and void This warranty does not cover any services performed by a hearing care professional in his her office Serial number Authorized hearing care professional stamp signature Date of purchase 49 CE 50 The CE symbol is confirmation by Phonak Communications AG that this Phonak product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC This symbol indicates that it is important for the user to read and take into account the relevant information in these user guides This symbol indicates that it is important for the user to pay attention to the relevant warning notices in these user guides Important i
17. nformation for handling and product safety Operating conditions y This device is designed such that it functions without problems or restrictions if used as intended unless otherwise noted in these user guides Australian EMC and Radiocom munications compliance label Temperature 20 to 60 Celsius 4 to 140 Fahrenheit Humidity transportation Up to 90 non condensing Humidity storage 0 to 70 if not in use Atmospheric pressure 500 hPA to 1100 hPA 51 52 Dx The symbol with the crossed out garbage bin is to make you aware that this device may not be thrown away as normal household waste Please dispose of old or unused device at waste disposal sites intended for electronic waste or give your device to your hearing care professional for disposal Proper disposal protects the environment and health This product has an embedded non replaceable battery Do not attempt to open the product or remove the battery as this may cause injury an damage the product Please contact the local recycling facility for removal of the battery 53 Manufacturer Phonak Communications AG Laenggasse 17 CH 3280 Murten Switzerland www phonak com phonak roger pit 029 0277 02 V3 00 2014 09 A W Phonak AG All rights reserved CE
18. s 1 Make sure Roger Clip On Mic and the Roger receiver are both powered on 2 Hold Roger Clip On Mic within 10cm 4 inches of the Roger receiver 3 Press the Connect ced button on your Roger Clip On Mic 0 10cm 0 4 inches 4 The indicator light will turn green for two seconds to confirm a successful connection 5 Repeat steps 2 amp 3 to connect a second receiver Depending on the receiver type you may connect a maximum of two Roger ear level receivers OR one Roger MyLink to your Roger Clip On Mic Indicator light connection status After pressing the Connect button the following feedback may be given by the indicator light Indicator light Meaning Connection was successful your Roger receiver is connected to your Roger Clip On Mic oo Roger Clip On Mic could not find a Roger receiver Move Roger Clip On Mic closer to your Roger receiver and make sure the Roger receiver is powered Then try to connect again O O The Roger receiver is not compatible with your Roger Clip On Mic 21 22 4 J l a ry rye 7 A Ae A Ilceina Raner Chln On Mic Zi L y rt E A 4 USIN U INUL er CH IDZ OUTE IVER 4 1 Wearing Roger Clip On Mic The easiest way to attach Roger Clip On Mic to the person speaking is by using its clip There are different ways of clipping Roger Clip On Mic to the speaker s clothes o Clipped on the Clipped on clothing Clipped between
19. s where electronic equipment is prohibited If in doubt please ask the person in charge A Device should not be used on aircrafts unless specifically permitted by flight personnel 43 44 A External devices should only be connected if they have been tested in accordance with corresponding IECXXXXX standards A Only use accessories that are approved by Phonak AG A Using your device s cables in any way contradictory to their intended purpose e g wearing the USB cable around the neck can cause injury Z When operating machinery ensure that no parts of your device can get caught in the machine Z Do not charge device while it is on your body A Caution electric shock Do not insert plug alone into electrical outlets 8 3 Product safety information D Protect the device from excessive shock and vibration Do not expose your device to temperatures and humidity outside of the recommended conditions stated in this User Guide Never use a microwave or other heating devices to dry the device Clean the device using a damp cloth Never use household cleaning products washing powder soap etc or alcohol to clean the device Only recharge your device using chargers supplied by Phonak or by stabilized chargers providing 5VDC and 2500 mA Do not connect an USB or audio cable to your device that exceeds 3 meters 9 ft in length D When the device is not in use turn it OFF and store it safely 45
Download Pdf Manuals
Related Search