User Guide - Snooper Services
Contents
1. You must connect your audio cable between the Aux In jack of DAB2000 and the audio device While in the auxiliary input mode you must press the MODE button and select one of the DAB preset modes to return to listening to a DAB station To recall the last listened to DAB station The DAB2000 automatically remembers the last DAB station that you were listening to This allows you to go back to the DAB station you were listening to quickly even if it is not in the memory preset list 1 Press the Last Station button to recall the station that was most recenty listened to The screen will show lt LS EMPTY ifthe last listened to station has not been memorized yet or lt station name if it has 2 Press the Rotary Knob to confirm your selection Alternatively after 3 seconds the DAB2000 will switch tothe last listened to station automatically To display the current FM transmitting frequency 1 Press the FM button and the screen will show lt Frequency where Frequency is the current FM transmitting frequency To set the FM transmitting frequency You can set DAB2000 to either AFC or auto scan mode refer to sections To enable AFC and To enable auto scan for further information to change the FM transmitting frequency However if you wish to change the setting and use your own selected FM transmitting frequency manually please follow the steps in this section or in the sections To save a desired FM transmitting freque2. where xx is the signal quality To set a DAB preset mode The DAB2000 provides individual memory settings for up to three sets of DAB preset modes DAB1 DAB2 and DAB3 Each DAB preset mode has its own memory presets of DAB stations please refer to To save a DAB memory preset and To recall a DAB memory preset sections later in this user guide for further information This allows a user to set up to three DAB presets for different users driver or passengers or a different group of DAB stations to enjoy based on the individual settings 1 Press the MODE button to select a particular DAB preset mode 2 Press the Rotary Knob to confirm your selection After 3 seconds the system will tune to the selected preset mode The screen will then show DONE Note When you switch to a different DAB preset mode the memory preset list of the selected DAB preset will be loaded into the internal operating system of the DAB2000 automatically The DAB2000 will then perform all functions based on the settings of this DAB preset mode The system default is DAB1 To save a DAB memory preset You can save your favourite stations in a memory preset list There are 4 memory presets available for you to store DAB stations in the memory preset list for each DAB preset mode 1 Select a DAB station to save in a memory preset 2 Press the or buttons to select a preset PX where X is from 1 to 4 that you want to save and then
3. Knob lt or gt to navigate to menu items and settings m 87 6MHz Default FM transmitting frequency m FM MODE select operating mode AFC_H AFC_L auto scan m FULLSCAN A full scan for DAB stations within the channel frequency 5A to 13F will be performed m ANTENNA SettoON for a certified active DAB antenna set to OFF for all other antennas DABRESET Clear all DAB stations presets for the three DAB preset modes m FACTORY Returns all settings to factory default settings m VERSION Displays the current firmware version STARTING UP THE SYSTEM Turn on your vehicles audio system 2 Enable the AF function on your vehicle radio if it is equipped with it consult your vehicle radio manual or contact the vehicle dealer to determine if your vehicle radio has the AF feature and how to enable AF feature 3 Tune the vehicle radio s FM frequency toFM 87 6 MHz which is the same as the DAB2000 s default FM TX frequency 4 Switch on the DAB2000 by plugging the vehicle charger into the vehicles power point the audio system display will show lt DABRADIO 5 The DAB2000 will perform a scan for DAB stations automatically 6 If FM 87 6 MHz is already used by a FM broadcaster or the frequency is noisy change the initial FM TX frequency as below Operation on DAB2000 o Press and hold the FM button for three seconds the DAB2000 will select a new and clear frequency to transmit the FM signa
4. frequency as it remains the same as before the switch While in the auto scan mode the DAB2000 will automatically search for three unused FM frequencies and save them into the memory in sequence from frequency 1 to frequency 3 When you are using the DAB2000 to listen to a DAB service and you experience constant interference from another source this means that you are driving into an area where the present FM frequency is used by an FM broadcaster When this happens you will need to find an unused FM frequency for transmitting the DAB service to your car radio The enabled auto scan feature can help you to do such a change quickly by doing the following steps Operating on DAB2000 1 Press the FM button and the screen will show the current FM transmitting frequency 2 Keep pressing the FM button and it will go through the options from frequency 1 to frequency 3 and the display willshow lt SX Frequency where X ranges from 1 to 3 and Frequency is the auto scanned frequency Select the frequency you prefer and th will be the new FM frequency for transmitting 3 Press the Rotary Knob to confirm your selection Alternatively after 10 seconds the FM transmitter will set and transmit the FM signal at the new frequency You can now listen to DAB stations via this new FM frequency Operating on vehicle radio 1 Manually change your vehicle radio s FM frequency to match the new DAB2000 transmitting frequency Note Al
5. is out of sync and you wish to reset them do the following a Reset to 87 6MHz Operating on vehicle radio e Press the FM preset of your vehicles radio to the frequency 87 6MHz if you have previously saved this frequency for DAB reception Otherwise tune the vehicle s radio to the FM frequeny 87 6MHz manually Operating on DAB2000 e Press the MENU button and then press the Rotary Knob This will reset the DAB2000 s FM transmitting frequency to 87 6MHz and the DAB2000 will use this new frequency to transmit the signal or e Press and hold the Last Station button twice in succession to reset the FM transmitting frequency to 87 6MHz b Reset to a frequency that has been saved in the FM frequency preset 1 Operating on vehicle radio Press the FM preset on your vehicle radio that corresponds to the same frequency as the DAB2000 s FM frequency preset 1 if you have previously saved this for DAB reception Otherwise tune the vehicle radio to that FM frequency manually Operating on DAB2000 Press and hold the Last Station button to reset the FM transmitting frequency to FM frequency preset 1 ATTENTION The DAB2000 comes with the AFC function In order to use this function your vehicle radio must have the AF alternative frequency feature and AF must be enabled Please consult your vehicle radio manual or the vehicle dealer for these requirements before using this function While working with the AFC function t
6. not just over the dotted area only Please also position as close to but not inside the A pillars cover shown below to get a better signal reception Black Shade Antenna2 A Pillar Dotted Area 2 Rear windscreen installation 2 1 If the cable length for the antenna can reach to the rear windscreen the glass mount antenna can be placed in the top left hand corner and on the inside of the rear windscreen that is not reflective coated As with the front windscreen installation attach the antenna 2 over the black band and as close to the edge of the windscreen as possible 2 2 For heated windscreens these have tiny electric lines across the glass to assist with defrosting for the best digital reception performance the antenna 1 must not be aligned with the electric lines as illustrated below Fig 1 This is the recommended antenna installation for the best digital reception Fig 2 This illustrates that the top of antenna 1 is aligned with an electric line this will reduce the reception quality and it is not recommended Clean the windscreen Ensure the antenna location on the windscreen is clean and free of dirt water or any other substance which will prevent the antenna from adhering properly to your vehicle s windscreen Clean the glass with an alcohol prep pad and wait until the surface is completely dry before attaching the glass mount DAB antenna Note Do not use a cleaner with surf
7. press and hold the or buttons to save the current DAB station into memory preset X of the present DAB preset mode The screen will show lt PX SAVED Note This new setting will overwrite any previous setting in the memory preset X To recall a DAB memory preset This function allows you to recall a favourite preset DAB station from the memory preset list 1 2 Press the or buttons to select a preset PX where X is from 1 to 4 If there is no DAB station saved in the memory preset PX the screen will show lt PX EMPTY If aDAB has been stored the screen will show lt x station name where station name is the name of the DAB station saved in the memory preset PX Press the Rotary Knob to confirm your selection Alternatively after 3 seconds the system will tune to the preset station if a DAB station is stored Note This function only recalls the stations saved in the memory preset list of the particular DAB Preset Mode please refer to To set a DAB preset mode section for further details To set the auxiliary input mode The DAB2000 provides the capability to play audio devices such as MP3 or iPod etc through your vehicle radio 1 Press the MODE button until the screen displays AUX Press the Rotary Knob to confirm your selection Alternatively after 3 seconds the DAB2000 will switch to the auxiliary input mode and you can start listening to the audio device Note
8. the tapes adhere to both surfaces securely 7 Wait eight hours for the adhesive to cure and bond to the surfaces and then join the pieces together 8 Alternatively or in addition you can secure the DAB2000 module in place with the screws supplied Installation do s and don ts As the DAB2000 module has an external antenna and FM Transmitter it is important to avoid signal interference from coiling the excess cable Below are the do s and don ts when coiling and storing the DAB2000 s excess antenna cable and power cable 1 Do not entwine the antenna and power cables together X 2 Minimize coiling loops of excess power cable or antenna cable and do not secure them on or beside the DAB2000 module The coiling of excess power or antenna cables should start about 10cm away from the DAB2000 module x Not 10 cm 10 cm Cable attached to DAB2000 10 cm OVERVIEW OF CONTROLS AND CONNECTORS DAB2000 Module S o Es r Se AERIAL AUXIN AERIAL SMB Connector for DAB antenna AUX IN 3 5mm stereo audio jack for aux cable 12VDC Power jack for power cable with vehicle adaptor Vehicle Audio System LCD Display The DAB2000 is operated by using a remote control the system messages from operating the remote control are converted into RDS text and are displayed as up to eight characters on the LCD screen of your vehicle s audio system Below is a list of DAB2000 system messag
9. 00 will revert to playing the last DAB station automatically If the DAB station list is empty before scanning the DAB2000 will tune to the first station of the new DAB station list resulting from this DAB scan If the DAB station list is empty before scanning and there is no station detected by the DAB scan thescreen will show lt EMPTY There are no DAB stations available in the area where you performed the DAB scan function To enable AFC Automatic Frequency Change If your vehicle s radio does not have the AF feature then please refer to the section To enable auto scan It may become necessary to change the FM transmitting frequency as you drive into an area where the FM frequency transmitted by the DAB2000 is being used by an FM broadcaster DAB2000 has an AFC function that allows you to continuously listen to DAB programs through your vehicle s radio system without the need to change the FM frequency manually Subject to vehicle radio compatibility To perform this AFC function your vehicle s radio must have the AF Alternative Frequency feature and the AF feature ofyour vehicle radio must be activated When the AFC function of DAB2000 is enabled and the AF feature of your vehicle radio is activated your vehicle s radio will tune to an unused FM frequency automatically when you drive into an area where the original FM frequency for DAB is no longer available You do not need to do To enable auto sca
10. AFC function are not compatible the AFC function must not be enabled instead refer to the section below To enable auto scan The system default is AFC_H mode enabled When your DAB2000 identifies a need to switch the FM transmission frequency this will usually force the vehicle radio to change the FM frequency automatically in most cases and the vehicle s radio display will show lt AF Frequency where Frequency is the new frequency DAB2000 is transmitting on If you hear static noise or another FM program and before AFC tunes to a clear frequency you can force an immediate frequency change manually by the following methods 1 Perform an immediate frequency change refer to section on page 21 To perform an immediate frequency change 2 To recall and change the FM transmitting frequency saved in memory refer to the section on page 21 To recall FM transmitting frequency saved in memory 3 To change the FM transmitting frequency manually refer to the section on page 20 To set the FM transmitting frequency setting 4 To reset the FM transmitting frequency to 87 6MHz refer to the section on page 23 To reset FM transmitting frequency setting 5 To perform an immediate frequency change to the frequency saved in FM Preset 1 F1 refer to the section on page 23 To set FM transmitting frequency setting to preset F1 While in AFC mode if the FM transmitting frequency for DAB2000 and the vehicle s radio frequency
11. FM frequencies you will need to choose a frequency from the scanned frequencies to set and synchronize between the vehicle s radio and the DAB2000 manually Alternatively you can usethe DAB2000 to set a new FM transmitting frequency manually or to set a frequency from one of the FM transmitting frequency presets which have been previously saved and then set the vehicle s radio FM frequency to match Note The DAB2000 needs to operate with an RDS vehicle radio to display the relevant system message from the DAB2000 via the vehicle radio display CONTENTS OF PACKAGE a Power Cable with DAB2000 Module Wehide Power Adaptor Rotary Knob Remote Control CR2032 Battery 7 Hook amp Loop Tape x1 25mm x 35mm Screw x2 C DAB Antenna with Mini Clip x3 Hook amp Loop Tape x2 25mm x 55 mm User Guide INSTALLATION DAB2000 Installation Tune in car audio system DAB adapter Install the supplied DAB antenna to FM frequency to match with transmits audio work with the DAB adapter see the the DAB adapter to receive via a FM specific antenna installation guide for Q frequency detail install information a antenna cable oe SMB connector Connect power plug For the in car installation of the DAB adapter refer to the user guide for detail to cigarette lighter cigarette lighter power cable Procedure 1 Please read the entire installation instruction proc
12. S micro transmitter and no complex cabling to connect to your vehicle s audio system The DAB2000 receiver is operated using a remote control while all messages related to the DAB2000 s operations such as service name memory preset etc are converted to RDS text and displayed on the LCD screen of your vehicle audio system The flexible configuration options of the DAB2000 make it easy to install in different vehicle makes and models Furthermore DAB2000 has an AFC Automatic Frequency Change function that allows you to listen to your favourite DAB programs through your vehicle radio system without the need to change the FM frequency manually when you drive into a metropolitan area where FM stations are highly concentrated Without AFC the manual frequency change can be hazardous and inconvenient as the driver will have to find an unused FM frequency by manually retuning the vehicle radio then changing the FM transmitter to use the same unused frequency and repeat this process each time the FM transmitter frequency is subjected to interference by another FM radio station Consult your vehicle radio manual or contact the vehicle dealer to determine if your vehicle radio has an AF alternative frequency function and how to enable the AF function before using the AFC function on the DAB2000 If your vehicle s radio does not have the AF function you can use the DAB2000 s auto scan function to scan automatically for three unused
13. Vehicle DAB Adaptor User Guide DAB2000 User Guide TABLE OF CONTENTS INTRODUCTION CONTENTS OF PACKAGE INSTALLATION DAB2000 Installation Antenna Installation OVERVIEW OF CONTROLS AND CONNECTORS STARTING UP THE SYSTEM USING REMOTE CONTROL KEYS To turn on or off DAB2000 To listen to the DAB stations To display station s information To set a DAB preset mode To save a DAB memory preset To recall a DAB memory preset To set the auxiliary input mode To recall the last listened DAB station To display the current FM transmitting frequency To set the FM transmitting frequency To save a desired FM transmitting frequency in memory To recall FM transmitting frequency saved in memory To perform an immediate frequency change MENU SETTINGS To reset FM transmitting frequency setting To set FM transmitting frequency setting to preset F1 To scan for the DAB stations To enable AFC Automatic Frequency Change To enable auto scan To set antenna power To reset DAB presets To restore to factory settings To display software version To upgrade software TROUBLESHOOTING TECHNICAL SPECIFICATIONS INFORMATION ON WASTE DISPOSAL INTRODUCTION The DAB2000 is a vehicle audio adaptor that offers a flexible and cost effective way to apply modern digital audio technology to your existing analogue vehicle audio system The existing analogue system in your vehicle can be easily upgraded to receive DAB DAB digital radio services DAB2000 uses an FM RD
14. actant to clean the windshield because Antennas 1 amp 2 and the Signal Booster may not adhere to the glass Attach the glass mount antenna to the windscreen 4 1 As the glass mount antenna can only be installed once if the antenna is removed it will not adhere again Therefore it is recommended that you try using the antenna on the chosen location first before attaching the antenna permanently 4 2 Gently peel off the adhesive separator of Antenna 2 and paste it on the inside of the windscreen on the chosen location press and rub to bond it to the glass 4 3 Repeat step 4 2 for the Signal Booster and then Antenna 1 4 4 Secure the antenna cable along the edge of the side windscreen a Use the three mini clips supplied and attach them to the antenna cable just below the antenna Gently peel off the clips adhesive separator c Fix the clips along with the antenna cable on the edge of the windscreen Mini Clip 5 Route the antenna cable within the car interior Route the antenna cable along the left hand side edge of the windscreen and then route the antenna cable within the vehicle interior to the DAB receiver Make sure the antenna cabk does not interfere with the safe operation of the steering wheel air bags and seatbelts or any other equipment 6 Connect the antenna to the DAB2000 module 6 1 Ensure that the DAB2000 is switched OFF unplug the vehicle charger 6 2 Plug the SMB connector at the endof the antenna cable i
15. ange station information while listening to a DAB station m Press and hold to turn the DAB2000 off Rotate Slowly lt gt Rotary m Step tune to select a DAB station Knob m Navigate to items sub items and settings after MENU is pressed m Adjust FM transmitting frequency by 100 KHz after FM is pressed Quick Rotation lt gt m Quickly tune to select another DAB station m Adjust the FM transmitting frequency by 2MHz after FM is pressed MODE Select one of the three DAB preset modes to listen to DAB or the Aux mode to listen to an external audio source Press and hold to scan for DAB stations FM Displays DAB2000 s current FM transmitting frequency Select and set the FM transmitting frequency from a manual setting or from one of the four memory presets In auto scan mode select and set the FM transmitting frequency from one of the three auto scan frequencies Press and hold FM to perform an immediate frequency change Presets amp Save or recall the 4 presets of DAB stations in a DAB preset mode Save or recall the 4 presets of FM transmitting frequencies after FM is pressed Last Station Recall the last listened to DAB station Press and hold to reset the FM transmitting frequency to the frequency saved in FM preset 1 Within 30 seconds press and hold to return the frequency to 87 6 MHz MENU m Enter MENU settings press and turn the Rotary
16. cy it remains on the current FM frequency as before To recall an FM transmitting frequency saved in memory You may drive into an area where the FM frequency transmitted by DAB2000 is used by an FM broadcaster When this happens your reception of the DAB station will get worse with increasing interference from the other FM transmission Switching to a free FM frequency will ensure continuous and clear reception of the DAB station you are currently listening to 1 5 Press the FM button the screen will show the current FM transmitting frequency Press the or buttons to select a preset FX and the screen will show the FM frequency saved into memory Make a note of that frequency number Press the Rotary Knob to confirm your selection Alternatively after 10 seconds timeout the DAB2000 will set and transmit an FM signal at this new frequency and the screen will show lt TO Frequency where Frequency is the frequency saved in the preset FX Check that the FM preset of your vehicles radio corresponds to the same frequency from step 2 if you have previously saved one for DAB reception Otherwise tune the vehicle radio to the same FM frequency of the DAB2000 You can now listen to DAB stations via the new FM Frequency Note While the DAB2000 is setting a new FM transmission frequency lt TO Frequency is displayed with the exception of the power button any button is pressed during this time is ignored To per
17. e on reflective coated glass In situations like these the DAB antenna needs to be placed on the rear view window 4 Do not bend or damage the antenna 5 The antenna should be fitted either on the passenger side of the front windscreen or on the rear windscreen as a safety precaution 6 The DAB2000 provides a 12v phantom power supply to the SMB connector for the DAB antenna to operate 7 Warning Once the antenna is adhered to the windscreen it cannot be relocated Please test the antenna in the location you intend to fit it before removing the adhesive separator and permanently fixing it to the windscreen Once the DAB antenna has been adhered to its location then it cannot be returned for credit or warranty claims Procedure 1 Front windscreen installation 1 1 For the best digital reception performance the glass mount antenna must be placed in the top left hand corner and on the inside of the front windscreen If there is a UV protection layer across the top of the windscreen then you must place the DAB antenna with Antenna 1 at least 5cm below this layer UV Protection Layer A Pillar gt 1 2 The glass mount antenna must be placed outside the sweeping area of the windscreen wipers see below 4 j ood fe 1 3 The windscreen usually has a black enamel band around the edges that contains a border of dots and a black shaded area Please place Antenna 2 over at least part of the black shaded area and
18. edure carefully before commencing with the actual installation Consult a professional installer if you have any issues or concerns with the installation 2 Select a location to place the DAB2000 module For the best performance please place it in the centre front of the vehicle or behind the vehicle s glove compartment For any other locations you may consider please place it away from metal objects and in an open area 3 Position the DAB2000 module with the bottom cover up and the cables and connectors to the back Topas _ A Antenna S gt F To Cigarette Lighter Secure the DAB2000 module with the supplied hook amp loop tape and screws Please refer to the section on Securing the DAB2000 module Step by Step later in this user guide for further information Install the supplied DAB antenna please refer to Antenna Installation Guide later in this user guide for installation instructions ATTENTION We have fully tested the supplied DAB antenna to work with DAB2000 If you replace it with a third party DAB antenna the performance may suffer For DAB2000 to work with the supplied active antenna the antenna power must be set to ON DAB2000 can also work with a passive antenna the antenna power must be set to OFF If you replace the supplied antenna with any third party antenna you must set the antenna power to OFF If you need to disconnect connect the antenna from the DAB2000 please unplug the DAB2000 f
19. es displayed on the vehicle s audio system LCD display whilst operating with the remote control Messages Description DABRADIO m Displays after the DAB2000 is switched on m Displays the 8 character short service name of the DAB station name f station TUNING m Indicates that tuning to a DAB station is in progress m Indicates the DAB2000 is performing a DAB reset or a factory RESETTING reset is in progress DONE m Confirms completion for certain system operations i e setting a DAB preset mode RETUNING m Indicates that the FM transmitting frequency is being re tuned to a new frequency m Indicates the DAB2000 is changing the FM transmitting frequency to a new frequency from a manual setting Other than the power button any remote control buttons pressed are ignored before the change is completed TO frequency m Indicates that the DAB2000 is changing the FM transmitting frequency to a new frequency using the AFC function Other than the power button any remote control buttons pressed are ignored before the change is completed AF frequency m Displays when the DAB2000 is switched off into the standby POWEROFF dey Remote Control Please refer to next sections USING REMOTE CONTROL KEYS USING REMOTE CONTROL MENU KEY for a detailed description of each operation Control key General operation Press m Switches the DAB2000 on m Confirms a selection m Ch
20. form an immediate frequency change This function can be used in either AFC or auto scan mode to force an FM transmission frequency change immediately Note You may also refer to To recall FM transmitting frequency saved in memory To reset FM transmitting frequency setting or To set FM transmitting frequency setting to preset F1 to perform an immediate frequency change In AFC_H or AFC_L mode While listening to a DAB station if you hear static noise or another FM broadcast and before AFC tunes to a clear frequency you can force an immediate frequency change by doing the following 1 Press and hold the FM button the screen will show lt AF Frequency where Frequency is the new frequency that the DAB2000 will set and use to transmit an FM signal This will force the radio to tune to the same FM frequency automatically 2 You can now listen to DAB stations via this new FM Frequency Note While the DAB2000 is in the process of setting a new transmission frequency lt AF Frequency isdisplayed with the exception of the power button any button pressed during this time is ignored In Auto Scan mode If you notice the DAB transmission is subject to interference you can force an immediate FM frequency change The DAB2000 will automatically choose and set a new FM frequency but you must tune the vehicle radio to match the DAB2000 s new FM frequency manually Operating on DAB2000 1 Press and hold the FM button the screen w
21. here are possible factors that could affect its normal operation 1 The FM sensitivity varies among vehicle radios and the sensitivity can affect the AFC s performance 2 The algorithm implemented in each vehicle radio s AF feature varies and this can affect the radio s FM frequency tuning when triggered by AFC If the AFC function is unable to function normally please disable AFC and use the Auto Scan mode instead Refer to the next section To enable auto scan To enable auto scan If your vehicle radio does not have the AF feature you must not enable AFC However you can use auto scan to automatically search for unused FM frequencies for transmitting When this function is activated the DAB2000 will keep searching for available FM frequencies and display these frequencies whenever you need them You may select one of them as the new transmitting frequency and tune your vehicle radio to this new FM frequency to receive DAB services continuously 1 Press the MENU button and then rotate the Rotary Knob lt gt until the screen shows FM MODE 2 Press the Rotary Knob to confirm and then rotatethe Rotary Knob lt gt until the screen displays AUTOSCAN 3 Press the Rotary Knob to confirm the function of auto scan is now enabled and the DAB2000 is operating in the auto scan mode Note Switching to the auto scan mode does not change the current FM transmitting
22. ill display lt TO Frequency where Frequency is the new frequency that the DAB2000 will set and use to transmit an FM signal Operating on vehicle radio 1 Manually change your vehicle radio s FM frequency to match the new DAB2000 transmitting FM frequency MENU SETTINGS To reset the FM transmitting frequency setting This function allows you to reset the FM transmitting frequency to the default setting of 87 6MHz 1 Reset DAB2000 s FM transmitting frequency by either way described below a Press the MENU button and the screen will display lt 87 6MHz and then press the Rotary Knob to reset the FM transmitting frequency to 87 6MHz b Press and hold the Last Station button twice to reset the FM transmitting frequency to 87 6MHz Press the FM preset of your vehicles radio to the frequency 87 6MHz if you have previously saved this frequency for DAB reception Otherwise tune the vehicles radio to the FM frequency 87 6MHz manually To set FM transmitting frequency setting to preset F1 This function allows you to set the FM transmitting frequency to the frequency saved in FM frequency preset 1 F1 DAB2000 will change the transmitting frequency immediately 1 Press and hold the Last Station button to set the FM transmitting frequency to the frequency saved in FM preset 1 F1 To return to the default FM transmitting frequency within 30 seconds after step 1 press and hold the Last Station button again to ret
23. isplays VERSION 2 Press the Rotary Knob to display the software version the screen will show the current software version number lt x x x x To upgrade software This function is used by maintenance personnel only to upgrade the existing DAB2000 software to a new version TROUBLESHOOTING Please read this user manual carefully before using the DAB2000 vehicle DAB adaptor If you still have difficulties in using this unit this section gives some of the most likely solutions to the problems you might have I cannot find any DAB stations Ensure that DAB coverage exists in your area Please visit www worlddab org or www digitalradionow com to check DAB coverage for your area I can find DAB stations but cannot get any sound Make sure that the vehicle radio is not muted check the volume settings of the vehicle radio have forgotten the FM transmission frequency setting of DAB2000 Press the FM button and the screen will show the current FM Transmitting frequency I cannot hear any DAB program when I start my vehicle and turn on the vehicle radio Check the following 1 Follow the instruction in the section STARTING UP THE SYSTEM to initialize the FM transmitting frequency on DAB2000 and the vehicle radio 2 Make sure DAB2000 is not in the auxiliary mode please refer to section To set the auxiliary input mode to check and return to DAB mode While listening to a DAB station have lost recep
24. l Operation on vehicle radio e Use the auto scan function of your vehicle s radio to search for an FM broadcast displaying the service name lt DABRADIO Stay tuned to this frequency Your DAB2000 and the vehicle radio are now synchronized 7 If your vehicle s radio does not have the AF feature do the following to change DAB2000 s FMTX mode to auto scan instead of the default AFC_H 7 1 Press the MENU button and then turn the Rotary Knob lt gt until the display shows FM MODE 7 2 Press the Rotary Knob to confirm and then turn the Rotary Knob lt gt until the screen displays lt AUTOSCAN 7 3 Press the Rotary Knob to confirm the function of auto scan is now enabled and the DAB2000 is operating in auto scan mode 8 Listen to the DAB stations Please refer to the USING REMOTE CONTROL KEYS section for further information 9 While you are using the auto scan function and you experience noise on the DAB station you are listening to please refer to the USING REMOTE CONTROL MENU KEY section To enable auto scan to select an auto scanned FM frequency or To set the FM transmitting frequency setting to manually switch to another FM frequency 10 To avoid draining the vehicle s battery unnecessarily when the DAB2000 is idle after 4 hours from the user s last action the DAB2000 will automatically switch off To switch the DAB2000 back on press the Rotary Knob to retu
25. n or To set the FM transmitting frequency setting in the sections below to switch to an unused FM transmitting frequency Furthermore there are two AFC modes AFC_H High Sensitive amp AFC_L Low Sensitive While in AFC mode DAB2000 will constantly detect and determine if a frequency change is necessary Set AFC_L mode if you experience the FM frequency is being changed too often and set AFC_H mode if you often hear static noise and the FM frequency is not changed By default the DAB2000 is set to use the AFC_H mode however if you want to change or return to AFC mode do the following Setting on DAB2000 1 Press the MENU button and then turn the Rotary Knob lt gt until the screen shows lt FM MODE 2 Press the Rotary Knob to select and then turn the Rotary Knob lt gt until the screen shows lt AFC_H or lt AFC_L 3 Press the Rotary Knob to confirm your selection The AFC function is now enabled and the DAB2000 is operating in the AFC mode Setting on vehicle radio 1 Enable the Alternative Frequency feature of your vehicle s radio Consult your vehicle radio manual or the vehicle dealer if your vehicle radio has the AF feature and how to enable the AF feature Note If your vehicle radio does not have the AF feature the AFC function must not be enabled on the DAB2000 and refer to the section below To enable auto scan If the AF feature of your vehicle s radio and the DAB2000 s
26. ncy in memory and To recall FM transmitting frequency saved in memory to change the FM transmitting frequency manually 5 Press the FM button the screen will show the current FM Transmitting Frequency Frequency Turning the Rotary Knob lt gt quickly will allow you to step up or down the FM frequency by 2MHz or just turn the Rotary Knob lt gt to step up or down the FM frequency by 100KHz until your desired FM frequency is displayed e g 106 7MHz Make a note of the frequency you have chosen Press the Rotary Knob to confirm your selection Alternatively after 10 seconds the DAB2000 will set and transmit on the new FM frequency and the screen will show TO Frequency Press the FM preset of your vehicle radio corresponding to the same frequency from step 2 above if you have previously saved an FM frequency for DAB reception Otherwise tune the vehicle radio to the same FM frequency you selected on the DAB2000 You can now listen to DAB stations via this new FM Frequency Note It is recommended to set the selected FM frequency you wish to use as one of the memory presets of your vehicle s radio Selecting this particular preset FM frequency together with setting the DAB2000 s FM transmitting frequency will enable you to start listening to DAB stations quickly While setting a new transmitting frequency is in operation and lt TO Frequency is displayed with the exception of the power b
27. nob to cancel while the screen is showing NO 3 1 The screen will show lt RESETING to indicate that DAB reset is in progress 3 2 The DAB2000 will perform a scan of available DAB stations automatically after the DAB reset is completed Note DAB reset will erase all previous DAB settings including all memory presets for all DAB presets of the system except the current FM transmitting frequency and all FM transmitting frequency presets To restore to factory settings 1 Press the MENU button and then turn the Rotary Knob lt 4 gt until the screen shows lt FACTORY 2 Press the Rotary Knob to perform a factory reset operation 3 If you want to reset the DAB2000 turn the Rotary Knob lt gt to find lt YES and then press the Rotary Knob for confirmation Otherwise you can press the Rotary Knob to cancel while the screen is showing lt NO 3 1 The screen will show lt RESETING to indicate that factory reset is in progress 3 2 The system will perform a scan of available DAB stations automatically after the factory reset is complete You must switch the vehicle radio to FM 87 6MHz to continue DAB listening Note Factory reset will erase all previous system settings and set them to default To display software version This function allows you to display the current software version of your DAB2000 1 Press the MENU button and then turn the Rotary Knob 4 gt until the screen d
28. nto the DAB2000 in the socket marked AERIAL DAB Antenna Uo DAB Receiver NOTE To achieve the best digital reception antenna 1 must not be placed over a UV protection layer There is no such restriction to antenna 2 Securing the DAB2000 module Step by Step To secure the DAB2000 module in your chosen location using the supplied hook amp loop tape and or screws please do the following 1 Locate the positions on the back of DAB2000 module and your chosen store location e g in the centre front of the vehicle or behind the vehicle s glove compartment where you want to apply the hook and loop tapes 3 Secure with fC gt screw f gt O Affix Affix Tape Tape O Le 2 Secure with screw 2 Clean both the surfaces on the DAB2000 module and your chosen location with alcohol if available and wipe dry before you start 3 Remove one side of the backing from thetwo pieces of hook and loop tape and adhere them onto the back of DAB2000 on the marked positions as per the diagram above 4 Remove the other side of the backing and adhere the DAB2000 module to the chosen location with the DAB2000 s cables and connectors to the back 5 Carefully separate the two pieces of the hook and loop tape so that the DAB2000 module and the location each has a piece of the tape 6 Apply the pressure evenly to all four pieces on the DAB2000 module and the location so that
29. on button to reset the FM transmitting frequency to FM frequency preset 1 If DAB2000 is in auto scan mode the FM channel you selected for DAB mode may be occupied by an existing radio station You need to change the frequency settings of the FM transmitter Please refer to the section To enable auto scan to set a suitable new FM frequency TECHNICAL SPECI FI CATIONS Digital Audio Services DAB DAB RF Frequency Range DAB Band III 174 MHz 240 MHz RF Sensitivity for DAB Band III 98dBm 100dBm FM Transmit Range 87 5 MHz 108 0 MHz Mains Power 11 V 16V DC Input Connectors DC power jack 3 5mm stereo audio jack Presets 4 DAB station presets for each DAB mode and 4 FM transmi t presets Operating Temperature Range 10 C 70 Storage Temperature Range 40 C 85 C DAB Antenna Connector Connector Type SMB Output Voltage 12V INFORMATION ON WASTE DISPOSAL This mark on a productand or accompanying documents indicates that when it is to be disposed of it must be treated as Waste Electrical amp Electronic Equipment WEEE Any WEEE marked waste products must not be mixed with general household waste but kept separate for the treatment recovery and recycling of the materials used aa For proper treatment recovery and recycling please take all WEEE marked waste to your Local Authority Civic waste site where it will be accepted free of charge If all consumers di
30. rn DAB2000 back to the operating mode USING REMOTE CONTROL KEYS To switch DAB2000 On or Off The DAB2000 can be switched on or off by doing the following 1 Press and hold the Rotary Knob while the DAB2000 is operating to switch it off 2 Press the Rotary Knob while the DAB2000 is off to return it to the operating mode To listen to DAB stations There are two options available for you to select and listen to a DAB station Quick Tune and Step Tune Step Tune is used when you want to step through the list of available DAB stations one by one and in alphabetical order Quick Tune allows you to move more quickly through the list of stations by advancing to the first station in the previous next alphabet character of the station list Once you have reached thedesired initial alphabet character you can then use Step Tune to refine your selection of the desired DAB station Step Tune 1 Turn the Rotary Knob lt gt to step through the stations one by one until the screen shows the desired station lt station name 2 Press the Rotary Knob to confirm your selection After 3 seconds the DAB2000 will tune to the station you selected if the rotary knob is not pressed The screen willshow lt TUNING Once tuning is complete the screen will show lt station name where station name is the new DAB station name selected Quick Tune 1 Turn the Rotary Knob lt gt quickly to tune tothe first DAB station in
31. rom the vehicle power adaptor first to avoid possible damage to the antenna Damage resulting from the incorrect installation of the antenna is not covered by the warranty Consult a professional installer if you have any issues or concerns with the installation Minimize coiling loops of excessive power and antenna cables and do not secure them on to the DAB2000 module Please refer to the section on Installation do s and don ts later in this user guide Plug one end of the power cable into the DAB2000 module and the cigarette lighter plug end into the vehicles power point Thereis a lock mechanism on the plug of the power connection to the DAB2000 module First plug the power cable into the 12V DC jack 1 and then turn the power plug 90 degrees clockwise 2 as illustrated below This will ensure that the power cable will be connected to the DAB2000 module at all times Oo Aas AERIAL AUX IN Start to use the D AB2000 with the remote control please refer to the sections on OVERVIEW OF CONTROLS AND CONNECTORS and STARTING UP THE SYSTEM later in this user guide for further information Antenna Installation Antenna 1 Antenna 2 Signal Booster Antenna Cable SMB Connector 00000 Caution 1 Please read all of the installation instructions carefully before commencing the actual installation 2 This glass mount DAB antenna is exclusively for use inside the vehicle 3 Itis not suitable for us
32. spose of Waste Electrical amp Electronic Equipment correctly they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment of any hazardous materials that the waste may contain Note about remote control battery Caution There is a risk of explosion if the battery is replaced by an incorrect type Dispose of used batteries according to the instructions SERVICE UNDER WARRANTY The DAB2000 comes with a standard 12 month manufacturer s return to base warranty If for some reason yourunit requires service under warranty return the DAB2000 by special delivery and in suitable packaging to The Returns Dept Performance Products Limited Cleaver House Sarus Court Stuart Road Manor Park Runcorn WA7 1UL Tel 0333 240 1000 Fax 0333 240 1100 Enclose the following information a Your name address and a full description of the problem b A telephone number where you can be reached during business hours c Serial number of your unit d Proof of Purchase PLEASE NOTE We cannot process any warranty claims unless proof of purchase is provided Please retain your receipt as a precaution Full terms and conditions of warranty are available on request
33. ternatively you can choose to recall an FM preset to change frequency if the preset frequency is unused and available Please refer to section on To recall FM transmitting frequency saved in memory To set antenna power For the DAB2000 to work with the supplied active antenna the antenna power must be set to ON The DAB2000 can also work with a passive antenna the antenna power must be set to OFFin these circumstances If you replace the supplied antenna with any third party antenna you must set the antenna power to OFF 1 Press the MENU button and then turn the Rotary Knob lt lt gt until the screen shows lt ANTENNA 2 Press the Rotary Knob to confirm and enter the antenna power selection operation 3 Then you can turn the Rotary Knob lt gt until the screen displays ANT ON to set the antenna power On 4 Oryoucan turn the Rotary Knob lt gt until the screen shows ANT OFF to set the antenna power Off 5 Finally press the Rotary Knob to confirm the antenna power setting Note The default antenna power setting is ON To reset DAB presets 1 Press the MENU button and then turn the Rotary Knob lt gt until the screen displays lt DABRESET Press the Rotary Knob to perform a reset operation for DAB presets If you do want to reset the DAB2000 turn the Rotary Knob lt gt to find YES and then press the Rotary Knob for confirmation Otherwise you can press Rotary K
34. the previous next letter of the alphabet Repeat the action until the screen shows the DAB station with the desired initial letter of the alphabet 2 Then use the Step Tune feature to step through the DAB stations one by one until the screen shows the desired DAB station lt station name 3 Press the Rotary Knob to confirm your selection After 3 seconds the DAB2000 will tune to the station you selected if the rotary knob is not pressed The screen willshow lt TUNING Once tuning is complete the screen will show lt station name where station name is the new DAB station name selected Note When the DAB station you have selected is not available the screen will show lt UNAVAIL There will be no audio output from the DAB2000 When the signal strength of the DAB station you have selected is too weak the screen will show POOR SIG Each time you start the DAB2000 if the channel list is empty it will perform a full scan for available DAB stations automatically To display the DAB station s information The DAB2000 provides certain information about the current DAB station you are listening to This information can be displayed repeatedly by pressing the Rotary Knob button 1 Each time you press the Rotary Knob whilst listening to a DAB station the screen will cycle through the DAB station s information below station name where station name is the name of the DAB station SIG xx
35. tion and only hear static noise or another FM program 1 Check if the DAB2000 station information shows lt POOR SIG or UNAVAIL if so you may be leaving the signal coverage area please refer to the section To listen to the DAB stations and to select another station In addition the station may be temporarily unavailable as you drive into a tunnel for example 2 If DAB2000 is in AFC mode the FM transmitting frequency for DAB2000 and the vehicle radio listening frequency may be out of sync To reset them do the following a Reset to 87 6MHz Operating on vehicle radio e Ensure that the FM preset of your vehicle radio is set to the frequency 87 6MHz if you have previously saved for it DAB reception Otherwise tune the vehicle radio to FM frequency 87 6MHz manually Operating on DAB2000 e Press the MENU button and the screenwill show lt 87 6MHZ and then press the Rotary Knob to reset the FM transmitting frequency to 87 6MHz or Press the Last Station button twice to reset the FM transmitting frequency to 87 6MHz b Reset to a frequency that has been saved in the FM frequency preset 1 Operating on vehicle radio e Ensure that the FM preset of your vehicle radio corresponds to the same frequency as in DAB2000 s FM frequency preset 1 if you have previously saved it for DAB reception Otherwise tune the vehicle radio to that FM frequency manually Operating on DAB2000 Press and hold the Last Stati
36. urn to 87 6 MHz To scan for available DAB stations This function searches for all available DAB stations in Band III from channel frequency 5A to channel frequency 13F that are available in the area where your vehicle is presently located DAB stations found as a result of the search are added to the station list in alphabetical order 1 To select full scan and start scanning for available DAB stations 1 1 Press the MENU button and then turn the Rotary Knob lt gt until the screen shows lt FULLSCAN then press the Rotary Knob to begin scanning for DAB stations in the channel range 1 2 Alternatively you can press and hold the MODE button to do a full scan of DAB stations Note Each time you start the DAB2000 if the station list is empty it will perform a full scan of the DAB stations automatically You may also need to perform a scan if you drive your vehicle to a new area where the broadcasting DAB stations are not on the current station list During the scanning for DAB Stations the screen will show lt FFFN in which FFF shows the current channel being scanned and N indicates how many stations have been detected so far While the scan operation is in process you can press the Rotary Knob at any time to stop the scan function and revert to listening to the currently selected station If the DAB station list is not empty before scanning then after completion of the DAB scan the DAB20
37. utton any button pressed is ignored by the DAB2000 To save a desired FM transmitting frequency in memory As unused FM frequencies may vary from one area to another it is recommended to save a few FM frequencies up to a maximum of 4 frequencies in the DAB2000 so that you can switch to a new FM transmitting frequency instantly when you drive into an area where the original FM frequency for DAB is no longer available 1 Press the FM button the screen will show the current FM transmitting frequency lt Frequency Turn the Rotary Knob lt gt to step up or down the FM frequency by 100KHz and choose a frequency the screen will show lt Frequency where Frequency is the chosen frequency Press the or buttons to select a preset memory FX where X is from 1 to 4 and then press and hold the or button to save the selected frequency to memory and it will show lt FX SAVED The default FM frequencies saved in the FM presets F1 to F4 are 87 6MHz 92 5MHz 102 5MHz and 107 9MHz respectively It is recommended to use the same FM frequencies saved in the DAB2000 as FM presets in your vehicle s radio where possible Selecting the FM preset of your vehicle s radio and the matching FM preset of the DAB2000 will switch the FM transmission frequency instantly for a clear reception of the DAB station Saving the FM frequency into the memory of the DAB2000 does not affect the current FM transmitting frequen
Download Pdf Manuals
Related Search