Installation and Operating Instructions Brayford Log
Contents
1. electricity supply having the same voltage as that shown on its rating label In the event of replacing the fuse supplied a 13 amp fuse approved by ASTA to BS 1362 must be used If the socket outlets in your home are not of the 13 amp BS1363 type they will not accept the plug connected to this heater therefore cut off the plug When cut off this plug can constitute a shock hazard if inserted into a socket outlet It must therefore be disposed of safely Before wiring the appropriate plug please note that the wires in this mains lead are coloured in accordance with the following code GREEN YELLOW EARTH BLUE NEUTRAL BROWN LIVE Connect the Green Yellow wire to the terminal marked E or the earth symbol or coloured Green or Green Yellow Connect the Brown wire to the terminal marked L or coloured Red Connect the Blue wire to the terminal marked N or coloured Black DO NOT connect the Brown Live or the Blue Neutral wires to the Earth terminal of your 13 amp plug If the terminals of the plug are unmarked or you are in any doubt consult a qualified electrician CAUTION If you use this heater in conjunction with a thermal control programme controller timer or any other device which switches the heater on automatically observe all safety warnings at all times Operation The unique flame effect may be enjoyed whether or not the heating elements are in operation Controls The heater controls are located o2. EMC EN55014 EN60555 2 and EN60555 3 which cover the essential requirements of EEC Directives 73 23 and 89 336 Glen Dimplex UK Limited Millorook House Grange Drive Hedge End Southampton Hampshire S030 2DF c Glen Dimplex UK Limited Customer Services Republic of Ireland UK customer help line 8 00AM 6 00PM Mon Fri 8 30AM 1 00PM Sat Tel 0870 7270101 Fax 0870 7270102 e mail customer services glendimplex com Tel 01 8424833 All rights reserved Material contained in this publication may not be reproduced in whole or in part without prior permission in writing of Glen Dimplex UK Limited
3. carpets or on long hair type of rugs This appliance is not intended for use by children or other persons without assistance or supervision if their physical sensory or mental capabilities prevent them from using it safely Children should be supervised to ensure that they do not play with the appliance The appliance must be positioned so that the plug is accessible If the supply cord is damaged it must be replaced by the manufacturer or service agent or similarly qualified person in order to avoid a hazard General Unpack the heater carefully and retain the packaging for possible future use in the event of moving or returning the fire to your supplier This model is designed to be free standing and is normally positioned against a wall A choice of 1kW or 2kW heat output is provided by the fan heater which is located at the bottom of the unit Before connecting the heater check that the supply voltage is the same as that stated on the heater On the Springborne model loose coals are packed separately within the carton When the heater is assembled the coals can be placed on top of the fuel bed as required Please note Used in an environment where background noise is very low it may be possible to hear a sound which is related to the operation of the flame effect This is normal and should not be a cause for concern Electrical WARNING THIS APPLIANCE MUST BE EARTHED This fire is suitable for operation on an AC
4. d and the heater has cooled If the cut out continues to operate intermittently the heater should be switched off and Customer Services contacted Cleaning For general cleaning use a soft clean duster never use abrasive cleaners The plastic viewing screen should be cleaned carefully with a soft cloth DO NOT use proprietary glass cleaners After Sales Service Your product is guaranteed for one year from the date of purchase Within this period we undertake to repair or exchange this product free of charge excluding lamps amp subject to availability provided it has been installed and operated in accordance with these instructions Your rights under this guarantee are additional to your statutory rights which in turn are not affected by this guarantee Should you require after sales service you should contact our customer services help desk on 0870 727 0101 It would assist us if you can quote the model number series date of purchase and nature of the fault at the time of your call The customer services help desk will also be able to advise you should you need to purchase any spares Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service Please retain your receipt as proof of purchase The product complies with the European Safety Standards EN60335 2 30 and the European Standard Electromagnetic Compatibility 3
5. n the right hand side of the fan heater see Fig 1 Three switches provide a choice of heat settings A switch is in the ON position when the side with the markings on i e l I or HI is pushed in oO l I Ts Fig 2 Switch 1 1 Controls the electricity supply to the heater and flame effect Note This switch must be in the ON 1 position for heater to operate with or without heat Switch 2 1 Provides 1kW heat output Switch 3 1II Provides 2kW output with switch 2 Maintenance WARNING BEFORE UNDERTAKING ANY MAINTENANCE OR CLEANING REMOVE PLUG OR DISCONNECT FROM THE ELECTRICITY SUPPLY Lamp Replacement e a 4screwson m back panel Fig 3 Two lamps are located behind the back panel as indicated in Fig 3 To gain access to the lamps the four screws which secure the back panel must be removed Remove and slide out panel as indicated on Fig 4 Remove the defective lamp by unscrewing it as shown see Fig 5 Replace with a 60W E14 SES Clear Candle lamp Take care not to over tighten the lamp Refit the back panel and secure with the four screws Safety cut out An automatic cut out will switch off the heater if for any reason it overheats This could occur for instance if the air inlet or outlet were restricted in any way If the cut out operates the heater will switch off The heater will switch on once the obstruction has been remove
6. x Di m lex Installation and Operating Instructions Brayford Log Stove Model BFD20 SESB 08 18740 3 Issue 3 Springborne Coal Stove Model SBN20 440 295 547 controls Brayford Model BFD20 440 295 547 controls Springborne Model SBN20 Fig 1 IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice When using electrical appliances basic precautions should be followed to reduce the risk of fire electric shock and injury to persons including the following e If the appliance is damaged check immediately with the supplier before installation and operation Do not use this heater in the immediate surroundings of a bath shower or swimming pool Do not use outdoors This heater must not be located immediately below a fixed socket outlet or connection box Do not cover or obstruct in any way the heat outlet grille located at the bottom of the heater Overheating will result if the heater is accidentally covered Ensure that furniture curtains or other combustible materials are positioned no closer than 1 metre from the heater In the event of a fault unplug the heater Unplug the heater when not required for long periods Keep supply cord away from the front of the heater Although this heater complies with safety standards we do not recommend its use on deep pile
Download Pdf Manuals
Related Search