POP Operating Instructions
Contents
1. pop operating instructions back rake action back angle Lift lever to release action lean backwards or forwards to achieve desired position push lever down to lock isb action back height back angle back height Turn wheel anti clockwise to release Raise or lower back to desired height Turn clockwise to lock Lift lever to release action lean backwards or forwards to achieve desired position push lever down to lock seat height seat depth Lift lever and use body weight to raise or Lift lever to release seat use body lower seat to desired position release weight to slide seat to desired position release lever to lock lever to lock Turn wheel anti clockwise to release Raise or lower back to desired height Turn clockwise to lock seat angle Lift lever to activate seat tilt Use body weight to adjust release lever to lock seat in desired position lumbar support Carefully insert adaptor in pump balloon to suit Carefully remove and safely store for future use synchronised action synchro action Lift lever to release action lean backwards or forwards to achieve desired position push lever down to lock For dynamic posture the chair may be left unlocked in its free float mode The action has a safety feature When the action is first unlocked lean against back to start the action back height Place hand below back gradua2. lly lift to desired height Lift to top to allow to drop to start position tension control To increase tension turn wheel clockwise Turn wheel anti clockwise to decrease tension o valve and Lift button on outside of arm and raise or lower arm to desired height release button to lock Please note Depending on the specification of your chair it may not have all of the featured options above Please see overleaf for the action on your chair back rake br independent seat and back isb synchronised seat and back syn care advice Please regularly check that your chair s components are complete and in good working order and ensure that the chair is structurally sound and functioning properly Plastic components should be wiped with a soft cloth soaked in mild detergent and warm water Rinse thoroughly and dry with a soft cloth In order to maintain the fabric over the five year guarantee period the upholstery must be cleaned and vacuumed on a regular basis Please visit www verco co uk for further information OFFICE FURNITURE LIMITED 10 2011 WWW VEICO CO UK
Download Pdf Manuals
Related Search