English SS0987E-SS0988E Operating Instructions
Contents
1. PHOENIX SS0987E SSO988E SERIES CHK SAFEX GOMPANY LIMITED USER INSTRUCTIONS Safe Control Panel Phoenix Brass nameplate Door Keypad Display Key lock Key clear Card swip direction indicator You will find in the transit packaging box e Two emergency keys e Two bolt down bolts e One allen key e One instruction card for hotel room applications SS0987E safes have two operating systems e A personal 4 digit code e An emergency code SS0988E safes have three operating systems e A personal 4 digit code e An emergency code e A credit card facility code THE EMERGENCY CODE FOR BOTH SAFES ARE SET TO 6 DIGITS AND WE STRONGLY RECOMMEND THAT YOU CHANGE BOTH THE PERSONAL AND EMERGENCY CODES FROM THE FACTORY SETTING 1 Enter the factory default code 1 2 3 4 the LCD display will indicate OPENED 2 With the door in the open position enter the 4 digit number you have selected as your personal code and press the key The bolts will slide out and the Icd display will show CLOSED to confirm that the new code has been accepted 3 Enter the new code again the bolts will retract and the door can then be opened 4 To lock the safe enter again the new code and press the key The LCD display will confirm CLOSED and the safe is locked With the door in the open position 1 Turn off for 5 seconds the red power switch located on the back edge of the2. door 2 Turn power back on The LCD display will indicate SECURE then GOOD 3 When the display has cleared press the key twice PRPG will appear in the display 4 Enter the default factory code 011223 the display will indicate NEW 5 Enter a new six digit code followed by the key the display will indicate AGAIN 6 Re enter the code again followed by the key the new code will be confirmed with DONE indicated in the display 1 For the first time of use enter the either the factory default code 1 2 3 4 or a previously selected personal code The display will indicate OPENED and the door can be opened 2 With door in the open position and unlocked slide the card through the card reader slot from right to left with the magnetic strip facing down 3 The LCD display will indicate CLOSED and the bolts will be extended The magnetic card has now been accepted The previously entered digital code is now inoperative 4 Slide the card again through card slot the display will indicate OPENED the bolts will retract and the door can be closed 5 To lock the safe slide the magnetic card through the card slot The display will indicate CLOSED and the safe is locked 6 To unlock the safe slide the card again through card slot the display will indicate OPENED the bolts will retract and the door can be opened 7 To change back to personal code operation with the door and l
3. n the power to the lock WALL BASE FIXING INSTRUCTIONS FOR SSO980E SERIES You will find inside your safe the following items for the wall or base fixing of your safe 2x M10 x 42mm rawl bolts 2x washers Locate the safe into the required position Open the door and mark the fixing holes Remove the safe and drill 2 holes where the floor or wall is marked using a 12mm masonry drill bit to a depth of 42mm And insert the rawl bolts Locate the safe back into position insert the bolts with washers fitted and tighten to wall or floor
4. ock in the open position enter the personal code followed by the key The display will indicate CLOSED and the lock will have reverted to keypad operation ap CE SAFEX GOMPANY LIMITED EMERGENCY KEYS In the event of lost codes or battery failure the override key can be used to open the safe The mechanical override lock is located under the brass Phoenix nameplate 1 Unscrew the two screws using the allen key holding the brass Phoenix name plate in position and remove the plate 2 Insert the override key and turn clockwise the bolts will be withdrawn and the door will open 3 Replace the brass name plate 4 Repeat the above procedure to set new codes or card application or replace batteries NEVER PUT THE EMERGENCY KEYS INSIDE YOUR SAFE BATTERIES Your safe will arrive with transit batteries installed and they can be tested by pressing the key once If in good condition ba hi will appear in the LCD display If in poor condition ba lo will appear TO REPLACE THE BATTERIES Open the safe door Turn off the power to the lock The switch is located on the hinge side of the door The sign I is for power on and the sign 0 is for power off Remove the two brass screws between the sliding bolts on the front of the door and the hinges on the back of the door Lift off the door cover remove the battery pack and replace the 4 batteries Replace the door cover and the screws and turn o
Download Pdf Manuals
Related Search