Installation and Operating Instructions WYNFORD
Contents
1. 3 Provides 2kw heat output with switch 2 Maintenance WARNING BEFORE UNDERTAKING ANY MAINTENANCE OR CLEANING REMOVE PLUG OR DISCONNECT FROM THE ELECTRICITY SUPPLY Lamp Replacement One lamp is located beneath the fuel effect To gain access to the lamp the grate fuel effect secured by two screws must be removed Remove the coal and carefully lift the grate fuel effect clear and set aside Unscrew the defective lamp and replace with a 240V 60W fire glow 2 pin Bayonet Cap Lamp Replace grate fuel effect secure with screws Safety cut out For your safety this appliance has been fitted with thermal cut out In the event that the product overheats the cut out switches the heat off automatically To bring the heat back into operation remove the cause of the overheating then unplug or turn off the electrical supply to the heater for up to 10 minutes When the heater has cooled sufficiently re connect and switch on the heater Cleaning Before commencing cleaning unplug the heater and allow it to cool The surfaces of the heater should be given an occasional wipe over with a dry soft cloth Do not use detergents abrasive cleaning powder or polish on the metal body of the heater The glass screen should be cleaned carefully with a chamois leather DO NOT use proprietary cleaners To remove any accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to2. DF
3. X Dimplex WYNFORD Models WYN20BR WYN20BL WYN20CH Installation and Operating Instructions BEAB Approved This product is protected by Patent Numbers GB2230335 AU621713 US4965707 IE63651and NZ232435 115 ah Issue4 28 11 2003 THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice When using electrical appliances Basic precautions should always be followed to reduce the risk of fire electrical shock and injury to persons including the following If the appliance is damaged check with the supplier before installation and operation Do not use outdoors Do not use in the immediate surroundings of a bath shower or swimming pool Do not locate the heater immediately below a fixed socket outlet or connection box Do not cover the heater Do not place material or garments on the heater or obstruct the air circulation around the heater for instance by curtains or furniture as this could cause overheating and a fire risk Do not leave young children or the infirm unsupervised in the vicinity of the heater Do not use this heater in series with a thermal control a program controller a timer or any other device that switches on the heat automatically since a fire risk exists when the heater is accidentally covered or displaced Ensure that furniture curtains or other combustible material are positioned no closer than 1 metre from the heater In the ev
4. clean the outlet grille of the fan heater located under the canopy To clean the fuel effect remove the coal pieces and wash in warm water The plastic tray should be wiped clean with a damp cloth When dry replace the coal pieces and arrange as previously described for best effect After Sales Service Your product is guaranteed for one year from the date of purchase We undertake to exchange or repair free of charge within this period any part with the exception of a lamp bulb found to be defective due to a manufacturing fault This guarantee in no way prejudices your rights under common law and is offered as an addition to consumers statutory rights If your heater requires service or does not seem to be working correctly please either return it to your supplier together with your dated receipt or proof of date of purchase or call us on the Customer Help line number given below This guarantee only applies in the United Kingdom The product complies with the European Safety Standards EN60335 2 30 and the European Standard Electromagnetic Compatibility EMC EN55014 N60555 2 and EN60555 3 which cover the essential requirements of EEC Directives 73 23 and 89 336 Glen Dimplex UK Limited UK customer help line 8 00AM 6 00PM Mon Fri 8 30AM 1 00PM Sat 8 18459 0 Millbrook House Grange Drive Customer Services Tel 08707270101 Hedge End Fax 0870 7270102 Southampton Hampshire Republic of Ireland 01 8424833 S030 2
5. ent of a fault unplug the heater Unplug the heater when not required for long periods Although this heater complies with safety standards we do not recommend its use on deep pile carpets or on long hair type of rugs The appliance must be positioned so that the plug is accessible If the supply cord is damaged it must be replaced by the manufacturer or service agent or a similarly qualified person in order to avoid a hazard General Unpack the heater carefully and retain the packaging for possible future use in the event of moving or returning the fire to your supplier Loose coals are packed separately within the carton When the heater is assembled the coals are placed on top of the fuel bed The heater is designed for use inset into a 407mm 16 or 457mm 18 wide by 559mm 22 high fireplace opening see also section Installation in a fire place opening A 2kw fan heater discreetly positioned in the canopy of the fire provides heating in cold weather Switching allows half or full heat A minimum distance of 1 metre 39 must be maintained between the front of the heater and any surrounding furniture overhanging curtains or other obstructions Before connecting the heater check that the supply voltage is the same as that stated on the heater Electrical Warning This appliance must be earthed This heater must be used on an AC supply only and the voltage marked on the heater must correspond with the s
6. upply voltage Before switching on please read the safety warnings and operating instructions For your convenience the heater is fitted with a rewireable plug incorporating a 13 amp fuse In the event of replacing the fuse in the plug supplied a 13 amp fuse approved by ASTA to BS 1362 must be used Installation in a Fireplace Opening At the rear of the fire two adjustable supports are provided for levelling the fire where the base of the fireplace opening is raised above the level of the hearth Adjust by removing the two screws holding each bracket in position then refit the bracket and the two screws in the required position The metal surround at the rear of the fire may be removed if required Operation The unique flame effect may be enjoyed whether or not the heating elements are in operation Please note Used in an environment where background noise is very low it may be possible to hear the fan which operates the flame effect This is normal and should not be a cause for concern Controls The heater controls are located on the right side of the canopy heat outlet Three switches provide a choice of heat settings A switch is in the ON position when the red indicator mark on the switch is visible Switch 1 Controls the electricity supply to the heater and the flame effect Note This switch must be in the ON position for the heater to operate Switch 2 Provides 1kw heat output Switch
Download Pdf Manuals
Related Search