Bedienungsanleitung Operating instructions Mode d'emploi
Contents
1. You must check the safety devices or damaged parts carefully for perfect function ing in keeping with the intended purpose be fore using the electric tool machine further Check whether the moving parts function properly whether they aren t sticking whether any parts are broken whether all other parts work properly and are fitted correctly and make sure that all other conditions which can influence operation and running of the elec tric tool machine are as they should be Dam aged guards and protective devices and parts must be repaired properly by an authorized service workshop or replaced provided that nothing else is stated in the operating in structions Damaged switches must also be replaced in the recognized service workshop Never use electric tools machines which can not be switched on and off by the switch 20 Caution For your own safety s sake on ly use accessories and attachments which are specified in the operating instructions or in the respective catalogue The use of acces sories or insert tools or attachments other than those specified in the operating instruc tions can result in personal injury to you 21 Only have repairs carried out by recognized electrical specialists This electric tool ma chine complies with respective safety regu lations Repairs may only be carried out by an electrical specialist otherwise an accident hazard for the operator can exist 22 Connect dust extraction equipment2. send tool and or related parts immediately upon discovery of the defect to the address of the local Hilti marketing organization provided This constitutes Hilti s entire obligation with regard to warranty and supersedes all prior or contemporaneous comments and oral or written agreements concerning warranties
3. If de vices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Please keep these safety precautions ina safe place Hilti TE 505 breaker Kit supplied with the machine Plastic case cleaning cloth Hilti insert tool grease operating instructions Technical data Power input 900 W Voltage versions 100 V 110 V 115 V 230 V 240V Current input 9 6A 8 7A 8 5A 4 2A 4 2A Frequency 50 60 Hz Machine weight 4 9kg Dimensions 440x90x210 mm Hammering speed under load 1860 2630 blows min Single impact energy 2 6 joules 5 2 joules 300 cm min with standard SM36 chisel 360 cm min with light duty LSM 28 chisel Chiselling performance in medium hard concrete Always wear ear protectors Always wear pro tective gloves Always wear safety glasses EC declaration of conformity Description Breaker Serial no XX 0000001 9999999 XX Designation TE 505 Year of design 1998 We declare under our sole responsibility that this product complies with the following standards or stan dardization documents EN 50144 EN 55014 EN 60555 according to the pro visions of the directives 73 23 EEC 89 336 EEC 89 392 EEC Hilti Aktiengesellschaft JA y JA cpaothy Dr Bruno Glaus Dr Heinrich Schaperk tter Leiter Marketing Bohrmontage Leiter Entwicklung Bohrmontage Dev
4. keep your balance at all times 13 Take good care of your electric tools ma chines Keep the drill bits insert tools etc sharp and clean so that you can do your work better safer and more reliably Observe the cleaning and maintenance regulations and the instructions for changing drill bits insert tools etc Check the supply cord regularly and have it renewed by a recognized specialist if it is damaged Check the extension supply cord regularly and if it is damaged replace it Keep grips and side handles dry and free from oil or grease 14 Always pull out the plug from the mains if the electric tool machine is not in use prior to cleaning and maintenance work and when changing a drill bit saw blade or insert tools of any kind 15 Never leave a key in place Always check before switching on that the key or adjusting tools have been removed 16 Avoid any unintentional start up Never carry a plugged in electric tool machine with your finger on the switch Always make sure that the switch is off when plugging the elec tric tool machine into the main electric sup ply 17 f an extension supply cord is used out side only use one which has been approved for the purpose and is correspondingly marked 18 Be attentive at all times Keep your eye on your work Remain in a sensible frame of mind and don t use the electric tool machine if you cannot concentrate completely 19 Check your electric tool machine for dam age
5. 1050 C bright red bright yellow red Harden the chisel by heating it to 850 C to 900 C bright red before quenching it in oil It should then be tempered at 200 C to 300 C Regrinding Pointed amt tal eS meee Channel 5 chisel a Flat chisel Wide flat chisel Hollow chisel ony Warranty Hilti warrants that the tool supplied is free of defects in material and workmanship This war ranty is valid as long as the tool is operated and handled correctly cleaned and serviced properly and in accordance with the Hilti Operating Instructions all warranty claims are made with in 12 months from the date of the sale invoice date and the technical system is maintained This means that only original Hilti consumables components and spare parts may be used in the tool This warranty provides the free of charge repair or replacement of defective parts only Parts re quiring repair or replacement as a result of nor mal wear and tear are not covered by this war ranty Additional claims are excluded unless strin gent national rules prohibit such exclusion In particular Hilti is not obligated for direct indirect incidental or consequential dam ages losses or expenses in connection with or by reason of the use of or inability to use the tool for any purpose Implied warranties of merchantability or fitness for a particular purpose are specifically excluded For repair or replacement
6. Bedienungsanleitung 2 4 Operating instructions a Mode d emploi 8 10 Istruzioni d uso 11 13 Gebruiksaanwijzing 1416 Manual de instru es 17 19 Manual de instrucciones 20 22 Brugsanvisning 23 25 K ytt ohje 26 28 Bruksanvisning 29 31 Bruksanvisning 32 34 Instrukcja obs ugi 35 37 N vod k obsluze 38 40 ei Ti Safety precautions Please read and keep these instructions Caution The following fundamental safe ty precautions must always be observed when using electric tools machines as pro tection against and electric shock the risk of injury and fire hazards Please read and take note of these precautions before you use the tool machine Keep these safety pre cautions in a safe place 1 Keep your place of work clean and tidy Disorder where you are working creates a po tential risk of accidents 2 Make allowance for influence from the sur roundings Don t expose your electric tools ma chines to rain Don t use electric tools ma chines in damp or wet surroundings Make sure the work area is well lit Don t use elec tric tools machines near inflammable liquids or gases 3 Always protect yourself against electric shock Never touch grounding earthing parts e g pipes radiators cookers ovens refrig erators 4 Keep children away Don t let other per sons touch the electric tool machine or sup ply cord Keep them away from your work area 5 Keep your electric tool machine in a safe plac
7. ade firmly on the work surface and chisel Fig 3 Switching on Set the chisel blade firmly against the work surface and operate the switch The TE 505 runs continu ously without maintaining pressure on the switch Press switch again to switch off Servicing Fig 6 The TE505 is equipped with a service indicator When the indicator lights up the machine should be serviced by Hilti Failure to service the ma chine when indicated could result in expen sive consequential damage Electric tools must comply with the applicable safety regulations Servicing therefore must be carried out only by qualified electrical specialists The use of original Hilti parts ensures optimum safety Chisel maintenance Pointed and flat chisels Slightly wom cutting edge Grind the tip of the chis el carefully without causing tempering colours to ap pear This can be repeated several times if necessary Badly worn cutting edge Reforge the chisel ata temperature of approx 900 C to 1000 C bright red bright yellow red It should then be hardened by heating to a temperature of 1000 C to 1100 C bright yellow red yellow Allow the chisel to cool slowly in the air do not quench Additional tem pering is not necessary Shaped chisels hollow channel wide flat chis els Slightly worn cutting edge Regrind carefully as with pointed and flat chisel Badly worn cutting edge Reforge the chisel at a temperature of 850 C to
8. arthed 3 Do not apply excessive pressure to the TE 505 this will not increase its performance Simply posi tion and guide the chisel The enclosed list of safety precautions must be observed Fig 1 Cleaning chisel connection ends The chuck is not incorporated in the machine s lubrication system The connection ends of chisels and other tools must therefore be cleaned regular ly and lubricated sparingly with Hilti grease Fig 7 Side handle Adjust the side handle as desired and lock it in position Starting time at low temperatures The starting time until hammering action operates can be reduced by jolting the chisel once against the working surface as the machine is switched on Operation Fig 2 Inserting a chisel Pull back the locking sleeve insert the connection end tum it until it clicks into place in the guide grooves and thren release the locking sleeve To remove the chisel Pull back the locking sleeve and remove the chisel Fig 4 Locking Press the locking switch to the left towards the Chisel positioning lever for sustained operation Press it to the right for on off operation Fig 5 Positioning the chisel blade Turn the switch to the symbol 0 Turn the chisel blade to the desired working position and lock it by switching to the chiseling symbol lt ___ Fig 6 Regulating the hammering power Set the TE 505 at the symbol 100 or at sym bol T 50 position the bl
9. e Electric tools machines not in use should be kept in a dry locked up place out of the reach of children 6 Don t overload your electric tools machines You will do your work better and safer in the specified performance rating range englisch 7 Always use the right electric tool machine for the job Don t use underpowered tools ma chines or attachments for heavier duty jobs Don t use electric tools machines for work and purposes for which they are not intend ed e g don t use a hand held circular saw to cut down trees or cut up branches 8 Wear suitable clothing Don t wear loose clothing or jewellery they could be caught up in moving parts When working outside the use of rubber gloves and non slip shoes is recommended Wear a helmet or cap if you have long hair 9 Always wear protective goggles If work causes dust wear a mask as well 10 Don t use the supply cord for any other purpose Don t carry the electric tool machine by the supply cord and don t pull the plug out of the socket receptacle by pulling the sup ply cord Protect the cable from heat oil and sharp edges 11 Secure the workpiece Use a clamping de vice or vice to hold the workpiece It is se cured more reliably in this way than in your hand and you can then hold and operate your electric tool machine with both hands 12 Don t bend over too far when working Avoid an unusual stance Make sure that you are standing firmly and
10. elopment manager D amp ET division 1 1998 1 1998 Chisels Pointed narrow flat wide flat extra wide flat hollow channel narrow or wide scoop in stan dard versions and some of light duty design Chuck TE Y Chisel cutting edge adjustment to 12 positions Permanent lubrication Adjustable side handle On off switch of rocker design Electronic r p m regulation for improved operating convenience Hammering power regulation max 100 min 50 Double insulation class Il CENELEC HD 400 This electric tool is radio and TV interference suppressed in compliance with the EC directives 76 889 EC 82 449 EC Radio and TV interference suppression as per EN 55 014 Service indicator with warning lamp Noise and vibration The sound power level of the machine is less than 108 dB A Wear ear protection The typical weighted acceleration is 12 m s Right of technical modifications reserved The respective regulations of your trade association and the enclosed safety precautions must be observed Do not use this product in any way other than as directed by these operating instructions Before operating the machine please note When working with the machine it must be held with two hands Always make sure that you have a safe stance foothold 1 The mains voltage must comply with the infor mation on the rating plate 2 The TE505 is double insulated and must not be grounded e
Download Pdf Manuals
Related Search