TFT LCD MONITOR USER MANUAL Series Models: L104AKL
Contents
1. the sharpness cae for VIDBOrhe source buttons to select the color temperature Nc 15 DC12V Narm Cool User Picture WS ge U DIO ENF REECE RADAR o select the picture mode User 17 PC VGAiWWie Vivid DNR Noise Use the source buttons to select the level of noise reducti Reduction Medium High DLC Use the source buttons to change the Black Level Extensi NC iem Description Co Volume Use the A V buttons to adjust the volume Mute Use the source buttons to change the Mute on off oot AA A This device complies with Part 15 FCC Rules Operation is subject to the following two conditions 1 This device may agg cause hapjatutitegf yao et AE del ine BASS ACTER Audio inus anyinterrerence RREN 15 wets RV Busnes t adjust the treble for R L Audio Balance Use the A V buttons to adjust the balance for RIL Audio it 5 Monitor settings via OSD nvermus monitor settings can be made using the OSD menu On Screen Display Press the Menu OK button to call up the OSD main menu Here you can make adjustments to the following items Picture Sound OSD Setup Advance PIP PC at PC input signal Geometry at PC input signal Use the buttons to toggle between the different items Press the Source button to select the appropriate item 5 1 Picture Use the A V buttons to select adjusts item and press source button to conf2. Danger This symbol is intended to alert the user to the fa presence of un insulated dangerous voltage within the n x product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person A Warning This symbol is intended to alert the user to the presence of important operating and maintenance LX servicing instructions in the literature accompanying the appliance Precautions Safety Installation Should any liquid or solid object fall into the unit Do not install the unit in an extremely hot or cabinet unplug the unit and have it checked humid place or in a place subject to excessive by the qualified personnel before operating it dust or mechanical vibration The unit is not designed to be waterproof Unplug the unit from the wall outlet if itis not Exposure to rain or water may damage the unit going to be used for several days or more To disconnect the cord pull it out by the plug Never pull the cord itself Cleaning Clean the unit with a slightly damp soft cloth Allow adequate air circulation to prevent Use a mild household detergent Never use strong internal heat built up Do not place the unit on solvents such as thinner or benzene as they might surfaces rugs blankets etc or near materials damage the finish of the unit curtains draperies that may block the v
3. output for AUDIO 1 4 AUDIO 1 IN Audio 1 5 signal input for AV1 5 YC S VIDEO IN YC 6 separated signal input 7 6 VIDEO 2 OUT Video looping output for VIDEO2 8 7 VIDEO 2 IN Composite signal input for VIDEO2 9 8 VIDEO 1 OUT Video looping output for VIDEO1 9 VIDEO 1 IN Composite signal 10 input for VIDEO1 11 10 DC12V IN 11 AUDIO Live out Ear phone out 12 PC VGA IN This device complies with Part 15 FCC Rules Operation is subject to the foll conditions 1 This device may not cause harmful interference 2 This device any interference received including interference that may cause undesired Connections of Audio Audio 1 Audio 2 L152AVL L172AVL L260HD AV1 V AV2 V S Video v PC 11 2 AUDIO 2 OUT L R Audio looping output IN L R Stereo udikbuelioghal inAuidiorAV2 YC PC 5 6 7 AUDIO OUTHE R Audielooping output for f UDIO 1 7 8 AUDIO 1 IN L R Stereo 4 AuMo t signalinput for AM1 2 V YC S VIDEO IN YC parated signdY input gt gt w 2 11 VIDEO BSSEFPHABO looping output e T3Contrast VIDEO Ysathe A Carbesidsigaurase decrease the screen con Brightnagat for VIDBeeahe A V buttons to increase decrease the screen bri Hud 3 VIDEO Useuhie VadFo bottpmg toutpurease decrease the hue 4SaturaigirVIDEQ Use the A Y buttons to increase decrease the saturation harpni amp ssVIDEO UN the a
4. size in back panel to install the LCD to the wall C VESA Bracket 200 HH LE E 100 TITTETEITIT 75 100 3 Monitor controls 26 10 4 Plastic e 31 10 4712 17 157 15 67 177 18 5 19 Aluminum 15 177 19 Plastic 65432 I1IR LED 1 Power Turn the monitor on off LED Green Monitor on LED Red Standby mode no input signal 2 3 Adjust Up Down A Increase or decrease the values in the OSD menu Up Increase the values Down Decrease the values 4 Item Select Hot key for OSD adjustments of volume contrast brightness hue saturation sharpness and Red Green Blue 5 Menu Function Press this button to call up the OSD menu This button is also used as Exit 6 Source To switch the video inputs or sub picture source in pip mode This button is also used as Enter and Select function in the OSD menu and to confirm your selected settings in the OSD menu KEY Lock Function Push Menu and Item after the LED flashes OSD of screen will show Key Lock Into key lock mode And push again after the LED flashes OSD of screen will show Key Unlock Into key unlock mode 4 Connections 1 AUDIO 2 OUT Audio looping output for AUDIO 2 2 AUDIO 2 IN Audio 2 signal input for AV2 YC PC N 3 3 AUDIO 1 OUT Audio looping
5. 80 420 x 350x 80 663 x 411 x 107 Weight 4 2 kg 5 7kg 9 9kg Operating temperature 0 to 40 C Possible Causes 1 Is the power cable connected to the unit 2 Is the unit turned on 3 Is the signal cable connected to the unit 4 Is the unit in power saving mode 1 Make sure the power cable has been properly connected to the unit 2 Turn on the unit 3 Make sure the signal cable has been properly connected to the unit 4 Press any key on computer keyboard 1 Is the signal cable connected to the 1 Make sure the signal cable has been Strange color unit properly connected to the unit 1 Is the signal cable connected to the 1 Make sure the signal cable has been unit 2 Is the video input signal within properly connected to the unit 2 Make sure the unit s specified frequency range the input signal is within the unit s specified frequency range No picture Picture distortion l l 1 Have the unit s brightness and Picture is too contrast settings been set to the lowest dim level 1 Adjust brightness and contrast 1 Check connection of input signal 2 Make sure the signal cable has been properly connected 1 Is the connection of the input signal Only sound correct but no picture 1 Make sure the signal cable has been properly connected to the unit 2 Adjust the volume to an appropriate setting 3 Make sure the audio cable has been properly 1 Is the signal cable connected to the un
6. 0 C Ihes euetpawerseimleccoan etea local NeAersiiryghelamcatanie eRtioDSen regarding the uniirafter reatiaquttetinfasmeatioreptevided abpeygerly connected to the unit 2 Turn on the signal cable connected to the unit 4 unit 3 Make sure the signal cable has been Is the unit in power saving mode properly connected to the unit 4 Press any No picture key on computer keyboard 1 Is the signal cable connected to the 1 Make sure the signal cable has been Strange color unit properly connected to the unit 1 Is the signal cable connected to the unit 2 Is the video input signal within the unit s specified frequency range 1 Make sure the signal cable has been properly connected to the unit 2 Make sure the input signal is within the unit s specified frequency range Picture distortion 1 Have the unit s brightness and Picture is too contrast settings been set to the lowest dim level 1 Adjust brightness and contrast 1 Is the connection of the input signal 1 Check connection of input signal 2 Make E s ee RSEN
7. 2 Colours 16 7M 16 7M Brightness 250 cd m 400 cd m 300 cd m LED Contrast 600 1 500 1 Response time Tr Tf 6 2 ms 6 2 ms View angle U D L R 80 80 80 80 80 80 85 85 Video input output S Video input Audio input output PC input Speaker 2x 2x Composite BNC 1x 4 Pin Mini Dim 2x 2x RCA 1x VGA input D Sub 15 pin 1x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 5A Power consumption Approx 21 watt Approx 19 watt Dimensions W H D mm 357 x 283 x 64 401 5 x 251x 60 3 Weight 3 2 kg 3 4kg Operating temperature 05194050 Monitor model L172AVL L185AVL L192AVL System PAL NTSC LCD panel 17 18 5 19 Visible area mm 338 x 270 409 8x 230 4 376x301 Picture format 4 3 16 9 4 3 Max resolution 1280 x 1024 1366x768 1280x1024 Pixel dot pitch mm 0 264 x 0 264 0 3x0 3 0 098 x 0 249 Colours 16 7M 16 7M 16 7M Brightness 250 cd m 400 cd m 250 cd m LED 250 cd m LED Contrast 1000 1 1000 1 1000 1 Response time 1 2 3 8 ms 3 6 1 4 ms 1 3 3 7 ms View angle U D L R 80 80 80 80 80 80 85 85 80 80 85 85 Video input output S Video input Full HD input Audio input output PC input Speaker 2x 2x Composite BNC 1x 4 Pin Mini Dim 1x Full HD A Type 2x 2x RCA 1x VGA inpu
8. 5 5 PIP Item Description Scale Use the source buttons to select the picture size Full Zoom Subtitle Regular Panorama Scan Size Use the source buttons to select the real image size Normal Native H Position Use the A V buttons to position the picture horizontally V Position Use the A V buttons to position the picture vertically Use the A V buttons to select adjusts item and press source button to confirm Then use the A V buttons to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item Item Multi Window Sub Source Size Position Border Colour Sound Source Swap Description Use source button to select the picture in picture function PIP POP Full POP 4 3 Off Use source button to select the source of the PIP sub picture Use source button to set the size of the sub picture Small Medium Large Use source button to define the position of the sub picture Note This function is only active if you have previously defined a sub picture Use source button to select the sub picture background colour Black Blue Use source button to select the sound source Main Sub Use source button to swap the main picture and the sub picture Note This function is only active if you have previously defined a sub picture 5 6 PC Use the A V buttons to select adjusts item and press source button to confirm Then use the A V buttons
9. E 5 3 OSD Setup Use the A V buttons to select adjusts item and press source button to confirm Then use the A V buttons to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item Item Description Language Use the source buttons to select the language Can be control several monitors are installed in the same area Use the source Set ID buttons to into the function then use up down key to select you setting the number 01 99 then press menu to exit OSD Press IR remote control ID key again to confirm the SET ID function Gamma Use the source buttons to set the gamma values 0 1 2 Freeze Use the source buttons to freeze the picture Press this button again to disable the freeze picture and to re establish the normal picture OSD Time Use the A V buttons to setting the OSD menu display time OSD Halftone Use the A V buttons to setting the OSD menu display halftone Recall Press the source button to restore the factory settings Obiter Anti Use the source buttons to on off the screen saver Screen protector Anti blur blur Version Firmware Version 5 4 Advance Use the A V buttons to select adjusts item and press source button to confirm Then use the A V buttons to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item
10. FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired Audio 1 Audio 2 AV1 V Ab his user manual This manuaLaims isti w to operate the monitors described in this manual This Bads Subject to rigid quality control However no guarantee can be given that mistakes are e changes to the manual without prior notice Before operatiag the appliance please read this manual carefully and retain it for further reference Verify that all appliance items arVincluded ih the delivery Should items be missing do not operate the applianca ggf5opntacAyelibloecal dealer Never attempt to repair the appliance yourself This should only be done by qualifjed service personnel Improper handling of the appligng will invalidate the warranty V AV2 S Video Ite in the er 1x LER monitor 1x i 1 x Power cord Description 1x i 1 x Audio c amp SIel eSbtional Use the A Y buttons to increase decrease the screen contrast 1 x IR rent tiglatirassi Use the A V buttons to increase decrease the screen brightness 1 x User manHale Use the A V buttons to increase decrease the hue Saturation Use the A V buttons to increase decrease the saturation Sharpness Use the A V buttons to increase decrease the sharpness Color Temp Use the source buttons
11. OSD menu and to confirm your selected settings in the OSD menu 8 OK Menu Press this button to call up the OSD menu This button is also used as Exit Note The menu button is also used to return to the previous menu 9 Select A V Directional buttons up down 10 Display Press this button to call up screen information such as resolution signal source etc 11 Picture Press this button to toggle between the different picture modes User Standard Movie Vivid 12 PIP Press this button to select the picture in picture function Define the size of the sub picture Small Medium Large POP Full POP 4 3 OFF 13 Swap When in PIP mode press the swap button to switch the main picture and the sub picture The swap button is only active if you have defined a sub picture before 14 Position When in PIP mode press the position button to define the position of the sub picture Either in one of the four screen corners or centred 15 ID Can be control several monitors are installed in the same area In ID mode press ID key then input setting number 01 99 to unlock ID function Please press ID key again to lock ID function 16 0 9 For ID setting number used 17 USB Right Left Catalog No use 2 LCD monitor Mounting Guide A Desktop Adjust the viewing angle of LCD to fit most comfortable monitoring status B Wall mount Free your space with wall mount design Please follow the fix hole
12. TFT LCD MONITOR USER MANUAL Series Models L104AKL L121AKL L152AVL L156HDL L172AVL L185AVL L192AVL L260HDL Table Of Contents Table of contents Warning sss semen ementi 2 NE steels 3 About this user manual Items included in the 4 d IRremo te areal eileen 5 2 LCD monitor mounting Rusa 6 3 Monitor controls Me 7 nee ames 5 Monitor settings via OSD menu eere rrr e prd 10 WE EEEE A EEEE 10 10 PRI ae a 11 am Nic ereere iniii a A E E S ERE ERER RARR 11 EIE 11 OOS MMC 12 MEE 12 6 19 7 Technical SDecITICallOfiS 2232282823233 0 4C KK AK x RRERAE 14 Warning TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS Caution CAUTION RISKOF ELECTRIC SHOCK DO NOT OPEN e CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols
13. del L104AKL L121AKL System PAL NTSC LCD panel 10 4 12 1 Visible area mm 211 2 x 158 4 246 x 184 5 245 76x184 33 Picture format 4 3 4 3 Max resolution 800 x 600 800x600 1024x768 Pixel dot pitch mm 0 264 x 0 264 0 3075 x 0 3075 0 240x0 240 Colours 262 K 262K 16 7M Brightness 250 cd m 400 cd m 450 cd m LED Contrast 500 1 700 1 700 1 600 1 Response time 20ms 30 ms 35 ms 25ms View angle U D L R 50 60 70 70 60 80 80 80 65 75 80 80 80 60 80 80 Video input output 2x 2x Composite BNC S Video input 1x 4 Pin Mini Dim Audio input output 2x 2x RCA PC input 1x VGA input D Sub 15 pin Speaker 1x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 5A Power consumption Approx 8 watt 10 watt Approx 12 watt 18 watt bunieshsoteciWieelrehamges without primeneBaa Eetpr excepted 300 x 239 x 61 Weight 2 3 kg 2 6 kg Operating temperature 05194056 Subject to technical changes without prior notice Error excepted Subject to technical changes without prior notice Error excepted Subject to technical changes without prior notice Error excepted Monitor model L152AVL L156AVL System PAL NTSC LCD panel 15 15 6 Visible area mm 304 x 228 344 2 x 193 5 Picture format 4 3 16 9 Max resolution 1024 x 768 1366x768 Pixel dot pitch mm 0 297 x 0 297 0 252 x0 25
14. entilation holes Retain the original carton and packing materials for safe transport of this unit in the future Safety Precautions Federal Communications Commission FCC Statement This Equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a Residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 3 e You are cautioned that changes or modifications not expressly approved by that party responsible for compliance could void your authority to operate the equipment This device complies with Part 15
15. irm Then use the A V buttons to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item This device complies with Part 15 FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired Audio 1 Audio 2 AV1 Y m and press source button to confirm amp eMideothe A Y buttons to increase decrease the values or use source button the values Press menu button to return to the previous menu item PC This device complies with Part 15 FCC Rules Operation is subject to the following two V4 conditions 1 This device may not cause harmful interference 2 This device must accept any interfefence received including interference that may cause undesired V v Item Audio 1 Audio 2 Contrast Use the A W buttons to increase decrease the screen contrast A Btightness Use he A Y buttbns to increase decrease the screen brightness Hue v Use tle amp buttons to increase decrease the hue A aturation Use th V buttons to increase decrease the saturation Sharpness Use the A V buttons to increase decrease the sharpness Pema Use the Aource buttons to select the color temperature Normal A sd eni
16. it 2 Has the volume been set to the min level 3 Is the audio cable connected to the unit nictiira Appendixes Troubleshooting The tables provided below include some problems that the user may encounter while using the display and the corresponding solutions Please refer to the contents of this section prior to contacting service personnel Monitor model L152AVL L172AVL L260AVL System PAL NTSC LCD panel 15 17 26 Visible area mm 304 x 228 338 x 270 575 7 x 323 7 Picture format 4 3 4 3 16 9 Max resolution 1024 x 768 1280 x 1024 1366 x 768 Pixel dot pitch mm 0 297 x 0 297 0 264 x 0 264 0 4215 x 0 4215 Colours 16 7M 16 7M 16 7M Brightness 250 cd m 250 cd m 400 cd m 420 cd m Contrast 600 1 1000 1 3000 1 Response time Tr Tf 8 ms 5 ms 6 5 ms View angle U D L R 80 80 80 80 80 80 80 80 89 89 89 89 Video input output 2x 2x Composite BNC S Video input output 1 1 4 Pin Mini Dim Audio L R input output 4x 4x RCA PC input 1x VGA input D Sub 15 pin Speaker 2x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 5A Power consumption Approx 21 watt Approx 30 watt Approx 70 watt Dimensions W H D mm 385 x 310 x 80 420 x 350x 80 663 x 411 x 107 Weight 4 2 kg 5 7kg 9 9kg Operating temperature 0 to 4
17. nction Only PC Video Video Video option Screen protector Anti blur Image auto move NTSC PAL Auto Switch 3D De interlace Technology 3D Comb Filter Technology Automatic Color Control and Color Killer Luminance transient improvement LTI Chrominance transient improvement CTl Directional zoom engine Video out support auto termination 75 Ohms Build in 2W speaker Support IR remote controller VESA standard bracket 75 100mm 7 Technical specifications Video input output Monitor model 104AS MDE 104AK3 MDE System PAL NTSC LCD panel 10 4 10 4 Visible area mm 211 2 x 158 4 211 2x 158 4 Picture format 4 3 4 3 Max resolution 640 x 480 1024x768 Pixel dot pitch mm 0 33 x 0 33 0 20625 x 0 20625 Colours 262 K 262K Brightness 330 cd m 350 cd m Contrast 300 1 900 1 Response time 35ms 16 ms View angle U D L R 40 70 70 70 75 75 75 75 2x 2x Composite BNC S Video input 1x 4 Pin Mini Dim Audio input output 2x 2x RCA PC input 1x VGA input D Sub 15 pin Speaker 1x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 3A Power consumption Approx 14 watt Approx 8 watt Dimensions W H D mm 266 x 214 x 60 266 x 214 x 60 Weight 2 3 kg 2 3 kg Operating temperature 0 to 40 C Monitor mo
18. t D Sub 15 pin 1x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 5A Power consumption Approx 30 watt Approx 21 watt Approx 25 watt Dimensions W H D mm 391 x 352 x 69 464 4 x 285 x 63 2 430x 356 x 66 7 Weight 3 9kg 4 2 kg 5 5kg Operating temperature 0 to 40 C Monitor model L152AVL L172AVL L260AVL System PAL NTSC LCD panel 15 17 26 Visible area mm 304 x 228 338 x 270 575 7 x 323 7 Picture format 4 3 4 3 16 9 Max resolution 1024 x 768 1280 x 1024 1366 x 768 Pixel dot pitch mm 0 297 x 0 297 0 264 x 0 264 0 4215 x 0 4215 Colours 16 7M 16 7M 16 7M Brightness 250 cd m 250 cd m 400 cd m 420 cd m Contrast 600 1 1000 1 3000 1 Response time Tr Tf 8 ms 5 ms 6 5 ms View angle U D L R 80 80 80 80 80 80 80 80 89 89 89 89 Video input output 2x 2x Composite BNC S Video input output 1 1 4 Pin Mini Dim Audio L R input output 4x 4x RCA PC input 1x VGA input D Sub 15 pin Speaker 2x built in speaker 2 watt 3D Comb Filter Yes 3D De Interlace function Yes Picture in Picture PIP Yes video PC OSD setting Yes Power input AC 100 240V 50 60Hz Adapter DC 12V 5A Power consumption Approx 21 watt Approx 30 watt Approx 70 watt Dimensions W H D mm 385 x 310 x
19. to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item 5 7 Geometry Item Description Contrast Use the A V buttons to increase decrease the screen contrast Brightness Use the A V buttons to increase decrease the screen brightness Colour Temp Use the source buttons to select the color temperature Normal Warm Cool RGB User Scale Use the source buttons to select the picture size Normal Center Auto Adjust Use the source buttons to Adjust the best image Use the A V buttons to select adjusts item and press source button to confirm Then use the A V buttons to increase decrease the values or use source button to change the values Press the menu button to return to the previous menu item Item Description H Position Use the A V buttons to position the picture horizontally V Position Use the A V buttons to position the picture vertically Clock Use the A V buttons to Adjust image distortion appearing as vertical or noise on the screen Phase Use the A V buttons to Adjust image distortion appearing as horizontal or noise on the screen PC timing 6 2 Mode Resolution 1 800 x 600 60 2 800 x 600 72 3 800 x 600 75 4 1024 x 768 60 5 1280 x 1024 60 6 1360 x 768 60 Special features Special Video Processor PIP Control Fu
20. to select the color temperature Normal Warm Cool User Picture Mode Use the source buttons to select the picture mode User Standard Movie Vivid DNR Noise Use the source buttons to select the level of noise reduction Off Low Reduction Medium High DLC Use the source buttons to change the Black Level Extension on off Item Description Volume Use the A V buttons to adjust the volume Mute Use the source buttons to change the Mute on off Sound Mode Use the source buttons to adjust the effect User Standard Movie Vivid 1 IR remote control 1 Power Press this button to turn the monitor on off 2 Zoom Press this button to toggle between the different picture formats Full Zoom Subtitle Regular Panorama 3 Mufe Press this button to disable the sound Press this button again to turn the sound on again 4 Freeze Press this button to freeze the picture Press this button again to disable the freeze picture and to re establish the normal picture 5 PC HD AV1 AV2 SV You can select the appropriate signal source directly PC 2 VGA 6 Item Hot key for OSD adjustments of volume contrast brightness hue saturation sharpness and Red Green Blue 7 Source To switch the video inputs or sub picture source in pip mode please use the IR remote control included in the delivery This button is also used as Enter and Select function in the
Download Pdf Manuals
Related Search