User manual
Contents
1. KICVISION HD10 ACTION CAMERA fY kitvision co uk DY 0 not dispose of Lithium ion ae batteries with general waste T Please return it to battery a Li ion recycling collection point JB 2957 Kitvision 2013 Christchurch Dorset BH23 4FL 9 Contents Main features Box contents Functions Instructions for use Troubleshooting Specifications 30 30 Main features Full HD video recording with multiple interchangeable recording modes 1O80P 960P 720P 8 Megapixel photo mode Various photo modes Single shot Triple shot Time lapse mode Self timer mode 170 ultra wide angle lens Aperture f 2 8 Waterproof up to 100 m with grade IP68 waterproof housing Detachable 1 5 TFT display screen for shooting and replaying videos Supports micro SD micro SDHC cards above Class 6 up to 32 GB not included 4x digital zoom applicable for 720P 30 and WVGA mode of NTSC standards Automatic white balance and automatic exposure Built in high quality microphone High capacity rechargeable battery up to 2 5 hours continuous recording Wireless remote control function remote controller not included sold separately Box contents 1 Kitvision Edge HD10 action camera 2 TFT screen 3 Waterproof case 4 Battery 5 Flat mount 6 Curved mount 7 Mount connector 8 Mount screw 9 USB cable 10 User manual Optional Accessories 11 Remote control 12 Chest mount 13 Car mount2. Repeat this operation to unprotect the protected files No operation can delete the protected files except for formatting e Auto play Auto plays photo files with an interval of 5s This option is only applicable for photo files e DPOF When viewing a photo file press the M key to enter the setup interface select the menu DPOF and the icon fj will appear in the upper left corner of this file This option is only applicable for photo files About DPOF As a standard for recording the print orders sent to the micro SD card DPOF Digital Print Order Format is applicable to the photos shot by digital cameras You can designate the photos to be printed and the number of their copies The following operations can be executed if your digital camera is DPOF compatible Insert the micro SD card into a DPOF compatible printer to output the photos as ordered The printer compatible with your camera can follow the DPOF orders to print the photos 24 Note The DPOF printing requires a micro SD card with preset DPOF information It will fail if you simply select the photos from the micro SD card and try to print them Note Some DPOF compatible printers and digital photo developing shops may fail to print the photos based on the specific settings If this is the case with your printer please refer to its user manual Otherwise please check the DPOF compatibility with the digital photo developing shop 8 Remote control You can p
3. including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorienting or relocating the receiving antenna Increasing the distance between the equipment and receiver Connecting the equipment to an outlet on a circuit which is different from the one the receiver is connected to Consult a qualified expert for help We apologise for any inconvenience caused by minor inconsistencies in these instructions which may occur as a result of product improvement and development 35
4. Resolution 8 MP 5 MP 3 MP Photo Capture modes Single shot Triple shot Time lapse mode Self timer mode Temperature Dimensions Storage temperature 20 C 60 C Operating temperature 10 C 50 C 59 x 42 x 43 mm including TFT screen 59 x 42 x 54 mm excluding TFT screen Format JPEG Weight 110 g including TFT screen 85 g excluding TFT screen 31 Power supply For charging the Edge HD10 please use chargers certified by the following authorities only c 6 UL mark C TICK mark CE mark CCC mark PSE mark BS mark U S Power Australia Power E U Power Germany Power China Power Japan Power U K Power Certificatation Certification Certification Certification Certification Certification Certification Care for your Edge HD10 e Do not drop knock or shake the video camera e Do not put the video camera close to an object that generates a strong magnetic field such as a television set a speaker a motor or a magnet Do not put the video camera close to an object that emits powerful radio waves for example an antenna Do not put the memory card in a place where static electricity is easily generated Strong magnetic fields may cause faults on the video camera or damage the files e Do not expose the video camera to high temperatures or direct sunshine e When recharging the battery disconnect the power supply immediately if overheating or if smoke or a peculia
5. USB cable to connect to a computer Data stored on the micro SD card can be read and the LCD segment screen will display the USB connection state icon e The camera can be charged at any time by connecting to a computer with the USB cable e The camera may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting Restarting will recover the camera Turning the TFT display on off When the camera is in any status pressing the Shutter key for 3 seconds will turn the TFT display on or off Note The TFT display cannot be turned on or off by pressing the Shutter key on the remote control 27 28 File storage and play i USB cable You can either copy or move the recorded video files to your computer via the USB cable or you can remove the micro SD card and insert it into a card reader to read the video data Note Please turn off the camera before inserting or unplugging the USB cable Note Turn the power switch to the OFF position before charging the camera The red indicator will flash slowly during charging Note You can directly copy or move the recorded files to your computer when the power switch is turned to the ON position HDMI cable and AV cable You can also use the HDMI cable or AV cable to connect the camera to a TV or monitor with an HDMI interface to play the recorded files Note After connecting the camera to the monitor via the HDMI cable please select the input sou
6. file the front green indicator light will turn off the camera will return to the preview state and the recording duration on the LCD segment screen will disappear Note If you turn the power off during video recording the system will save the current file recorded before it shuts down Note If the battery power is low during video recording the system will save the current file recorded and show the message Low Battery on the TFT display screen until the camera is turned off or it automatically enters standby mode Note If the memory space becomes full during video recording the system will save the current file recorded show the message Card Full on the TFT display screen and return to the preview mode The video recording duration on the LCD segment screen will also disappear Note When the or keys are pressed in voice recording mode the voice increasing reducing operation will not be executed however when the or keys are pressed when recalling audio files the voice increasing reducing operation will be executed continued 19 continued Using the camera 4 Photo shooting You can set the image resolution before taking photos Press the M key to enter the setup interface press the gt or lt keys to move the cursor to I select the menu Image Resolution and press the OK key to enter the resolution setup menu There are three resolution modes availabl
7. not please charge the camera using the included USB cable The red indicator will flash slowly during charging and will remain red with the battery icon displayed on the TFT display screen after charging 2 Formatting the micro SD card Please use a high speed micro SD card only and format it on the camera before recording or taking a picture If the micro SD card has been used on other devices please format it on the camera before any operation Note Please confirm whether the files on the micro SD card are needed before operating Locked files on the camera can be formatted to remove Formatting will wipe all data on the micro SD card 3 Setting the date and time A yellow number indicates the current cursor position By pressing the lt or gt key you can move the cursor to the setup interface fe4 and select the date or time Press the OK key to confirm which will turn this number red and the value of the date or time can be changed Then press the OK key again to finish Finally move the cursor to using the lt or gt key and press the OK key to confirm Setup Fed is 12 06 21 33 iC Be a Vi Parameter settings 2 Bit rate Options in recording modes 1080P 12M 6M 960P 8M 4M 720P 8M 4M WVGA 8M 4M If a high bit rate is In preview mode press the M key to enter the menu interface then press the lt or gt key to move the cursor left or selected you will
8. photo left In zoom in mode the photo can be zoomed Return to recall interface OK l l Las a in or out by pressing or Playing audio files In voice mode press the key and enter the Record interface All files will appear on the screen Select the photo file by pressing the gt or lt keys and press OK to view Press the key to enter the thumbnail preview mode When playing audio files you can select the following functions Button Functions Button Functions Decrease volume Increase volume lt No function gt No function Pause continue OK Play end continued 23 continued Using the camera 7 Managing your files In recall mode select a file and then press the M key to execute operations like delete protect etc e Delete one Delete the current photo file Press the OK key twice follow the interface prompt to select Yes or No and select Yes to delete e Delete all Delete all photo files that aren t protected Press the OK key once follow the interface prompt to select Yes or No and select Yes to delete e Protect Lock files to protect them To do this whilst selecting your videos or photos to view press the M button then select protect Once you have selected the file you want to protect press OK and the icon will appear in the upper left corner
9. 14 Bicycle mount 15 Adhesive mount set Functions TFT display screen MENU key Up key Left key Down key Recall key OK key Push button Lanyard hole Microphone Speaker SD card slot Right key AV output interface Record button Indicator light video voice recording Power switch Microphone Red indicator light on charging LCD segment screen Shutter Stop key SOMNODUARWN oS SS eS i SS SS Ss NS ORNTDHRDNS 1415 16 17 18 19 20 21 ino AV lt n opny 22 23 24 23 26 Camera Lens Green indicator light video recording shooting HDMI output interface USB output interface Threaded mount hole HDM la ON 3 S Instructions for use Startup 1 10 The camera can be used in two ways Either handheld or attached to various mount accessories It can also be used underwater with the waterproof case Note to remove the TFT display screen press the push button and ease off carefully e Installation and removal of the e Installation of the waterproof case and main body TFT display screen and main body TFT display Main body Install TFT display screen Main body Waterproof case Install main body into the waterproof case onto the main body Installing the remote control optional An optional remote control can be purchased for use with the camera Please use the accessories shown below for correct installation Velcro Clip Bind
10. e for your selection 3M Photo shooting resolution of 2048 x 1536 5M Photo shooting resolution of 2592 x 1944 8M Photo shooting resolution of 3200 x 2400 e Single shot e Triple Shot e Time lapse mode 20 In preview mode press the Shutter once to shoot a photo You will hear a Click the front green indicator will flash once the photo shooting icon on the LCD segment screen will also flash once and the system will return to the preview state Press the M key to enter the camera setup interface Press the gt or lt keys to move the cursor to press the gt or lt keys to select the menu Tripple and press the OK key to confirm Press the M key to exit the setup interface after setting When the Shutter is pressed once the camera will then take three consecutive photos Press the M key to enter the camera setup interface press the key to move the cursor to fj then press the gt or lt keys to select the menu Continuous Shooting and press the OK key to set the continuous shooting interval time at 2s 3s 5s 10s 20s or 30s Press the M key to exit the setup interface after setting the interval time When the Shutter button is pressed the camera will start shooting one photo every 2s 3s 5s 10s 20s or 30s until the button Is pressed again to stop e Self timer mode Press the M key to enter the camera s
11. e the camera is turned on Pressing the Shutter once will take one photo e Triple shot Pressing the Shutter once will take three consecutive photos e Time lapse mode Takes one photo every 2s 3s 5s 10s 20s 30s until they key is pressed to stop the card is full or the power has run out e Self timer mode Select the self timer delay time Os 5s or 10s then press the M key to return to the Preview state Press the Shutter key once to start the timer The self timer indicator will flash at the end of the delay time and take one photo The system will then automatically recover the shooting mode to single shooting If the Self timer Delay Time has been set but the unit is restarted without pressing the Shutter key the machine will auto set the Self timer Delay Time to O seconds Note Single shot Triple Shot Time lapse mode and Self timer modes cannot be activated at the same time c System parameter setting 1 Beep Turning the key tones on or off Note The camera will still beep when you start and stop a video recording This cannot be turned off Green indicator light Please turn it on or off before self timing the default setting is ON Time display Please set before using The camera will auto record the shooting date and time of an image and display it in the bottom right corner of the file Loop coverage When ON the video audio file will be automatically saved in a s
12. egment once every 15 minutes If it is not set the video audio file will be automatically saved in a segment once every 30 minutes Note The video length is actually determined by the file size not the length of time For example When Loop coverage is on for 15 minutes if filming in a dark environment the video may record for a little longer than 15 minutes Auto standby Select the auto standby time to OFF 2 minutes 5 minutes or 10 minutes Once selected if there is no operation the timer will start and the camera will turn off input and output to enter standby mode at the end of the time set If there is any operation during countdown the system will re time If the video recording or shutter is operated in the standby process the camera will wake up The default standby time is set to OFF TV output format NTSC or PAL The video format outputted to TV can be selected If the selected format is changed the camera will restart to update the parameters Format Once you ve confirmed that recorded files do not need to be saved all files can be removed by formatting Note If there is no card inserted the memory of the camera will be formatted When a card is inserted the card will be formatted rather than the camera s memory continued 17 continued System parameter setting 8 Factory default This operation restores the parameter settings to the factory default If restoring the factory default the system will set the time
13. eo recording mode continued 21 22 continued Using the camera 6 File recall You can view the audio files video files and photo files on the camera Press the key to enter the recall selection interface and press it again to exit Select the Record menu to view the audio and video files or select the Capture menu to view the photo files Playing a video file Press the key to enter the Record interface All files will appear on the screen Select the video file by pressing the gt or lt keys and press OK to play Press the key to enter the thumbnail preview mode When playing video files you can select the following functions Button Functions Button Functions Decrease volume Increase volume lt Rewind gt Fast forward Pause continue OK Play end Browsing photo files Press the key and enter the Capture interface All files will appear on the screen Select the photo file by pressing the gt or lt keys and press OK to view Press the key to enter the thumbnail preview mode When browsing photo files you can select the following functions Button Functions Button Zoom out e Page up e n zoom in mode move the photo downward e n zoom in mode move the photo upward lt A gt inigi e In zoom in mode press OK to move the e n zoom in mode press OK to move the
14. etup interface press the gt or lt keys to move the cursor to then press the gt or lt keys to select the menu Self shot and press the OK key to set the delay time at Os 5s or 10s Press the M key to exit the setup interface after setting the delay time When the Shutter is pressed once the camera will then start the timer and shoot a photo at the end of the delay time Note If the memory space becomes full the system will display the message Out of Memory on the TFT display screen and return to the preview mode 5 Voice recording Press the M key to enter the camera setup interface select the menu Capture Mode press the OK key to enter the selection interface press the gt or lt keys to select amp press the OK key to confirm your selection and finally press the M key to exit the setup interface Press the Record key to start recording and the green indicator will flash slowly the TFT screen will display the voice recording icon and the timer will start After sound recording press the M button to return to the system setting interface Select the Capture Mode menu and press OK to enter the selection interface Press the gt or lt keys to select si exit the voice mode then press the M key to return to the preview interface Note When the camera is restarted or it wakes up it will recover to vid
15. ffixing the 3M double sided foam sticker onto the surface e If necessary such as when the camera is being used at low temperatures under 20 C we suggest heating the surface of the 3M double sided foam sticker with a hair drier or similar before fixing Tips 1 When the unit is in use for a long period it is normal for the surface temperature to rise w If you are not going to use the unit for a long period it is suggested that you charge it once every six months to maintain the performance of battery The use of the digital zooming function during shooting will have a slight impact on the image quality When using different modes the visual angles will be slightly different To play a high definition video file smoothly it is recommended that you use a PC or similar device nu pw If you enable the cyclic recording function for a long period or you frequently shoot delete photos the memory card may have data fragments meaning you may not be able to store or shoot photos Please back up the data to an external storage device and format the memory card 34 FCC Statement The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules 1 This device may not cause harmful interference and 2 this device must accept any interference received
16. get a clearer picture with increased file size right and press the or key to move the cursor up and down After selecting the menu press the OK key to set the selected menu and press the M key again to exit 3 Capture mode a Parameter setting for video recording Select either video recording a or voice recording amp 1 Video resolution Note In voice recording mode press the Record key once The system will start recording the voice recording duration will be displayed on the bottom of the TFT display screen and the green indicator will flash slowly When the Stop key is pressed the system will stop and save the current audio file recorded the green indicator will turn off and the red indicator will remain on the corresponding operating prompt will be shown on the LCD The optional resolutions for video recording are 1080P 30 FPS 1920 x 1080 16 9 segment screen and the camera will return to preview mode 960P 30 FPS 1280 x 960 4 3 Note The voice recording process only responds to operations of Stop and Shutdown 720P 60 FPS 1280 x 720 16 9 720P 30 FPS 1280 x 720 16 9 WVGA 60 FPS 848 x 480 16 9 b Parameter setting for photo shooting 1 Image resolution 8 0 MP 3200 x 2400p 4 3 5 0 MP 2592 x 1944p 4 3 3 0 MP 2048 x 1536p 4 3 2 Capture mode e Single shot The shooting mode is automatically set to single shot each tim
17. ing tape optional Before use 1 LCD segment screen Turn the power switch to the ON position to check the battery power If the battery level is low charge it using the supplied USB cable with a power adaptor or USB port of a PC The red indicator light will stay on and the icons on the LCD segment screen will be shown The camera is now in normal preview state The icons shown on the LCD segment screen will indicate the following Record mode The wm icon indicates video recording mode and the icon indicates voice recording mode Photo shooting prompt The Micon will flash once when shooting one photo Power icon The icon will be seen when the camera is on The disappearance of the icon indicates that the camera has either shut down or entered into standby mode Video recording duration When the Record key is pressed once the duration of the current video recording file will be displayed in the middle of the screen for example OOS 22 It will stop when the Stop key is pressed Note The video recording duration will be displayed on both the LCD segment screen and the TFT display screen Battery power The icon indicates how much battery power is left More black lines indicate more power and less black lines indicate less power Note The battery power indication icon will not be displayed when the camera is in standby mode or switched off USB connection The USB mode icon gt indicates whether the camera
18. is connected to the computer The green indicator light on the left will flash slowly Note The icon will only be displayed when the camera is connected to the computer TF card capacity indication The icon indicates the capacity of the TF card More black lines indicate more space and less black lines indicate less space The green indicator light on the left will remain on when the card is out of memory continued T continued Before use The following indicators can be seen on the TFT display screen Work mode The si icon shown in the top left corner of TFT display screen indicates that the camera is in video recording standby state Battery power The icon shown in the bottom left corner of the TFT display screen indicates how much battery power is left Resolution of video recording In the bottom left corner of the TFT display screen 1O80P 960P 720P WVGA will show to indicate the video recording resolution in standby mode Spare storage capacity In the bottom right corner of the TFT display screen will indicate whether an external card is available and will indicate spare storage capacity In preview state the camera will not respond to operations of lt and gt The camera can be charged with the included cable The red indicator on the top of the unit will flash slowly during charging and will remain red once fully charged Note Before use please check that there is enough battery power If
19. n for the set time in the system settings the system will automatically enter standby power saving mode Pressing the Record or Shutter key or any key on the remote control will wake the system up Note Pressing keys on the TFT screen in standby mode cannot wake the system up Note The LCD segment screen will not display anything in standby mode 10 AV output connection In preview state connect the camera with the display device using an AV cable All of the camera s functions can then be operated Note After connecting with an audio and video display device the TFT screen on the camera and the voice will be turned off and the audio and video will be displayed on the device s display The LCD segment screen on the camera will display the corresponding function operations normally T1 12 13 HDMI output connection In preview state connect the camera with the high definition display device using an HDMI cable The camera s functions can then be operated Note After connecting with the HDMI display device the TFT screen on the camera and the voice will be turned off and the audio and video will be displayed on the device s display Note The camera may be in an abnormal state if the HDMI cable is inserted or unplugged improperly when connecting It can be recovered once it is re started and the LCD segment screen will display the corresponding function operations normally USB connection e In startup state use the
20. r smell occur Keep the video camera out of the reach of children during charging The power cable may cause asphyxia or electrical shock e Store the video camera in a cool dry and dust free place Notices for Waterproof Casing The waterproof casing should be installed correctly Please note the following when using the camera Do not disassemble and reaffix the sealing ring of the casing keys and lens cover Doing so can make the waterproof casing ineffective Do not place the casing in environments where there is corrosive gas such as strong acid or alkali and keep it away from chemicals and other corrosives To avoid deformation do not expose the waterproof casing to high above 50 C or low 10 C temperatures for long periods of time To avoid deteriorating the waterproofing performance do not expose the casing to direct sunlight for long periods of time Before using the casing we advise you to check that the seal rings are in good condition the casing is well sealed and tightly buckled and that there is no debris in the sealing joints After using the casing in sea water please clean with fresh water then use a dry cloth to wipe the surface Leave in a cool and ventilated place to dry 33 Cautions for using 3M double sided foam sticker e Please choose a Suitable curved or flat surface to ensure that the 3M double sided foam sticker attaches e Please make sure that the surface is clean and smooth before a
21. rce on the monitor to display data from the camera Note If you select the AV cable please connect each of its terminals to the relevant TV or monitor terminal in the same colour Note Please adjust the parameters of the monitor to optimise the image effect SAS USB port on HD10 USB port on PC MAC USB cable TV monitor o 4 T1 AV interface AV interface Ca i on HD10 on TV i 5 AV cable HDMI interface HDMI interface on HD10 on TV HDMI cable 29 30 Troubleshooting We hope you ve now got all the information you need to get started but if you re having problems with anything please feel free to contact us at support kitvision co uk Specifications Built in high quality microphone 170 ultra wide angle field of view Lens Aperture f 2 8 1080p 1920 x 1080 pixels 16 9 30 FPS 960p 1280 x 960 4 3 30 FPS Video NTSC 720p 1280 x 720 16 9 60 FPS 30 FPS Audio Format WAV Storage Micro SD micro SDHC with minimum class 6 up to 32 GB not included USB 2 0 for data connection and battery charging Connection HDMI Detachable 1000 mAh rechargeable Li ion battery Power Battery life up to 2 5 hours continuous recording Display True colour 1 5 TFT display 16 9 480p 848 x 480 16 9 60 FPS WVGA Operating platform requirements Operating system Windows XP Vista or above Mac OS Format MOV Sensor 5 0 MP CMOS Sensor
22. to 01 01 2012 9 Language Press the lt or gt key to choose your desired language 10 Frequency Select the frequency to 50 Hz or 60 Hz depending on local grid frequency in order to avoid the screen flickering in preview mode or in video recording 11 Date Time The time can be adjusted and changed It will be displayed on the bottom right corner of the video file or photo file when recording or shooting Note Press the M key in the submenu to exit Using the camera 1 Insert a micro SD card 2 Turn the power switch to the ON position to turn on the camera The red indicator will light up and the camera will enter the preview mode Note If the battery power is low the battery icon and the message Low Power will be shown on the TFT screen Note If no micro SD card is inserted you will see the micro SD card icon on the TFT screen Video recording Manual recording Press the Record key once in preview mode to start recording The video recording duration will be displayed at the bottom right of the TFT display screen the Green Indicator of Video Voice Recording and the front Green Video Recording Shooting Indicator will flash slowly and the recording duration on the LCD segment screen will be displayed normally The video recording process will only respond to the zoom function key When the stop key is pressed the system will stop and save the current video recording
23. urchase a remote control to control video recording photo shooting and stopping The red indicator on the remote control will flash once when you press any of the keys on the diagram below Before use please follow the steps below to ensure that the remote control corresponds with the camera e Turn off the camera press and hold the Record key turn the power switch to the ON position and release the Record key Press both the Record and Stop keys on the remote control once within 3s to finish the remote control pairing process The camera will beep twice when pairing is successful Note To check whether pairing was successful you can use the wireless remote control to control the camera The control functions include Starting stopping video recording photo shooting and waking up from standby mode The camera will beep once for each operation When video recording is stopped the camera will beep twice Record Note Remote control range The remote control should be used within 15 ahumar metres with no obstacles Note When the camera is in standby mode pressing the Record Shutter stop or Stop key on the remote control can wake the system up continued 25 26 continued Using the camera 9 Standby mode Turn the power switch to the ON position The system will start working and it will enter preview mode once initialization has finished If there is no operatio
Download Pdf Manuals
Related Search