AA-2083 916Mhz WIRELESS HEADPHONE User's Manual
Contents
1. p MTD Be a _ ays Audio AA 2083 916Mhz WIRELESS HEADPHONE User s Manual Distributed by TechBrands by Electus Distribution Pty Ltd 320 Victoria Rd Rydalmere NSW 2116 Australia Ph 1300 738 555 Int l 61 2 8832 3200 Fax 1300 738 500 www techbrands com Made in China 8 Package Contents Wireless headphone and Transmitter cradle Power Supply Adaptor cable 3 5mm stereo plug to 2 x RCA plugs A ii sz Audio cable 3 5mm to 3 5mm stereo plugs User s manual not shown Getting Started A Technical Specifications Dia Ooo Maximum transmission power 9 9 dBm l Connect the power adaptor to a Mains Socket 2 Connect the plug on adapter to the 5v DC input on transmitter switch the unit on using the power switch on the rear of the transmitter The power light will turn green indicating the transmitter 1s on w CHARGING NEEDLE 5VDC SOCKET z m AUDIO LIGHT POWER LIGHT 3 Place the headphones charging socket on the charging pins on the tranmitter The transmitters light will turn orange to indicate charge The light will change to green once the battery is charge Average charge time is 8 12 hours Radio tuning band FM Radio 87 5 MHz to 108 MHz Transmission range 100 m under optimum conditions Connectors and ports I x stereo Audio In 3 5 mm socket headphones l x stereo Audio In 3 5 mm socket transmitter I x Audi2. o Toslink socket transmitter 1x5V DC In Power supply Mains Adaptor Input 100 240VAC 50 60Hz 0 2A Output 5V 300 mA Rechargeable Rechargeable Lithium Polymer battery 3 7V Battery 900 mAh built in to headphones Battery Option Alternative power option 2 x AAA Alkaline batteries not included Headphones 260g Transmitter cradle 240g Dimensions Transmitter cradle 215 x 134x 73 mm WxHxD Transmitter cradle Headphones 216x 237x 134 mm 4 Connect a 3 5mm plug the to the audio socket of the transmitter with the opposite 3 5mm plug or 2 x RCA plugs depending on the source s output Alternatively you can use a Toslink cable not included to connect to the secondary audio input from a toslink source 5 The audio light will turn green when audio is being transmitted to the headphones AUDIO SIGNAL INDICATING LIGHT 6 The audio light will turn orange when no audio is being transmitted Using the FM Scan Feature I Once the source selector switch is on FM the headphones will now receive FM radio At this time the transmitter does not require to be on 2 The light near the FM switch will be on when the unit 1s receiving radio reception or off when there is no reception being received FM SWITCH 3 Press the Scan button for the headphones to search for the next available FM station 4 The headphones will pick up radio stations based on your location and the available local FM radio station
3. s between 87 5MHz to 108MHz 7 Move the Power selector switch to DCI to use the built in Li Po rechargeable battery When the rechargeable battery runs flat the headphones will make a tone to alert you the battery is running flat and will require a recharge Or switch the selector to DC2 once you have installed 2 x AAA dispoable batteries 8 Move the Source selector switch to WL to receive the wireless signal from the transmitter Or move the switch to FM to receive Radio 9 You can use a 3 5mm plug to 3 5mm plug or 2 x RCA cable from the source directly to the Audio input socket to the headphones 10 Press the scan button to move to the next available radio Station BATTERY COVER BATTERY BOX 11 Press either VOL or VOL to adjust the volume higher or lower
Download Pdf Manuals
Related Search