HKSW0101WP-user manual-
Contents
1. Any video source with the HDMI video output interface can be connected 4 Connect the IR remote extension connector to the IR remote signal output hole of the transmitter Installation and Use for Receiver 1 Install the receiver on another base and place the receiver beside an HD display device in another room D l Note Put the antenna end upward L_ J Itis not recommended that you place any article on the receiver or beside it to avoid affecting the receiving distance and image effect The transmission distance between the transmitter and the receiver is 30 meters at most If signals are obtained by penetrating a wall the transmission distance and image effect are affected 2 The wireless network status indicator is ON after the receiver power supply is connected and wireless network connection is made successfully 3 Connect the receiver to the HD display device with a standard HD AV cable The video status indicator on the receiver is ON after video connection is made successfully Images appear on the display device HD TV HD projector ADMIN Any display device with the HDMI video input Interface can be connected 4 The video source can be controlled remotely by pointing the remote control at the IR receiving window on the receiver Note This product matches only with an IR remote control in the 38 KHz carrier modulation mode Meaningso flndicatorS tatuses Workings tatus gt The transmitter2. is connected successfully in the wireless mode Off gt The transmitter fails to be connected in the wireless mode Flash rapidly gt The device is abnormal Indicator Indicators tatus Green on Wireless connection status indicator transmitter gt The video source is connected successfully gt The video source fails to be connected Video indicator Green on transmitter Off gt The receiver is connected successfully in the wireless mode Off gt The receiver fails to be connected in the wireless mode gt The device is abnormal Green on Wireless connection receiver Flash rapidly gt The display device is connected successfully gt The display device fails to be connected Video indicator Green on receiver Off Ci Bs 1 ae CE CE G C ae C SPECIFICA TIONS Items 5002JH Transmission Frequency 5all S29 Giz Frequency Stability 4PPM Bandwidth Transmission Power Receiving Sensitivity System Latency Sending receiving channel 4 channels for sending 1channel for receiving HD video protocol HDMI 1 3 HD video encryption protocol HDCP 1 2 6 Transmitter Items Unobstructed Effective Range Power Supply Consumption Current Dimensions W x D x H Approx Weight Receiving Frequency RF communication system Modulation mode Frequency stability Bandwidth Transmission Power Receiving Sensitivity System latency Sending receiving channel HD video protocol HD video encry
3. ption protocol Unobstructed Effective Range Power Supply Consumption Current Dimensions W x Dx H Approx Weight Operating Temperature Storage Temperature Operating Humidity Transmitter Receiver 5002JH gt 30m 5V x 2A 10 148 x 97x 18 mm 440g including the base 5 1750C MIMO OFDM 4PPM 40MHz gt 15dBm ims 1channel for sending 4 channels for receiving HDMI 1 3 HDCP 1 2 gt 30m OW xe 2A 10 148 x 97 x 18 mm 436g including the base 10 C 50 C 20 C 80 C 15 85 RH All the specifications are subject to minor change without prior notice Cautions e The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shallbe placed onthe apparatus e Turn off the Camera Monitor ifthe system is notin use e The adapter is used asthe disconnect device from the mains The adapter shall remain readily operable e The Camera Monitor can only be completely disconnected from the mains by unplugging the adapter e Donotcutthe DC power cable of the apparatus to fit with another power source e Attention should be drawn tothe environment aspects of battery disposal Antiference Ltd User Manual Wireless HDMI HDMIWS Fradley Distribution Park Wood End Lane Fradley Park Lichfield Staffordshire WS13 8NE Tel 44 0 1675 465487 www antiference co uk
Download Pdf Manuals
Related Search