User manual - Antiference
Contents
1. 14 www strong tv STRONG DIGITAL TV Simply press and confirm with OK to start the recording Default recording time is set to 2 00 hours If you like to change the duration time of a recording press and select the duration with lt gt During the recording a recording sign will be shown in the channel list To stop the recording press W and press OK again to stop the recording This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed Please connect an USB storage device with sufficient free space before you start a recording 6 9 Timeshift Timeshift allows pausing live broadcasts and resume playback later Press Il in viewing mode to activate Timeshift according the set Timeshift mode in the menu A time banner and pause symbol will appear on screen Live TV is now frozen Press II to resume timeshifted playback Press REW FF for fast rewind fast forward Press ll to return to live TV This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed 7 0 MAIN MENU The Main Menu consists of the following items Installation Channel Multimedia System Others and Network 7 1 Installation This menu consists of the following items Satellite Setting Automatic SAT Scan Manual Scan Satellite Find Information Press th2. Bad picture blocking error during heavy rain Receiver switches off after 3 hours of inactivity of remote commands Heavy rain will attenuate satellite signals below a certain level blocking will occur Power saving Auto standby function is activated Make sure your dish installation is up to standards to minimize rain effects When in doubt ask a local satellite specialist for advice Switch Auto standby function off if you don t like it Receiver is suddenly behaving unexpectedly or erratically for example after a mains power failure power glitch lightning strike near you or after a interrupted software update Mains power problems could cause a glitch in software in rare cases Load factory setting from the System menu If not recoverable ask a local satellite specialist for advice or contact local Service Hotline or send email to our Support via www strong tv No picture or sound but HDMI or Scart is not Switch to correct TV input The RCU is not working Battery exhausted RCU is incorrectly aimed dolay aidiareen LED selected on your TV or Switch Audio Amplifier to Psy aa A Audio Amplifier correct input y TV is not switched on Switch TV on Change the batteries Aim RCU at the receiver or check that nothing blocks path to the front panel 30 www strong tv STRONG DIGITAL TV Audio is muted on receiver audio is muted No audio only vi
3. STRONG Digital High Definition Satellite Receiver SRT 7004 DIGITAL TV User manual SRT 7004 is delivered with USB multimedia support After downloading the PVR software from the website www strong tv the receiver can be upgraded to support the recording function via USB This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed OI DOLBY Diskxc HD www strong tv Fig 2 A Cex N HDO N SONAWO 29 i Fig 7 Fig 8 Fig 9 Router Provider STRONG DIGITAL TV Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG 2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG 2 PATENT PORTFOLIO WHICH LICENSE IS AVAILABLE FROM MPEG LA LLC 6312 S Fiddlers Green Circle Suite 400E Greenwood Village Colorado 80111 U S A THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE A
4. changes 2 Repeat the previous step to delete more programmes Skip TV or radio programme 1 Select the programme you want to skip and press the EDIT button Then press the BLUE button 2 The programme will be marked to skip The receiver will skip this programme while Zapping between programmes in normal viewing mode in channel list mode the skipped channels remain selectable 3 Repeat the previous step to skip more programmes 4 To confirm and exit the menu press EXIT Disable a skipped TV or radio programme Press the BLUE button on the programme marked with the skip symbol Move a TV or radio programme 1 Select the programme you want to move and then press the EDIT button Then press the GREEN button 2 A move symbol will appear Press OK 3 Press AW to select the new position of the programme www strong tv 19 STRONG DIGITAL TV 4 Press OK to confirm the new position 5 Repeat the above steps to move more channels Locking programmes You can lock selected programmes for restricted view 1 Select the programme you want to lock and then press the GREEN button The programme is now marked as locked 2 Repeat the previous step to select more programmes 3 To confirm and exit the menu press EXIT 4 In viewing mode When coming to a locked channel Press exit at the warning popup and enter your Password Note Programmes will only be locked when channel lock is set to On in the System menuParental
5. date settings Press A to select an option and lt gt to adjust the setting Press EXIT to exit the menu GMT Usage Select On for automatic time and date updates from live signal or Off for entering them manually Time Zone Select the Offset from GMT standard time Set Date Enter the date using lt P and the numeric buttons when GMT Usage is set to Off www strong tv 21 STRONG DIGITAL TV Set Time Enter the time using lt P and the numeric buttons when GMT Usage is set to Off Sleep Time Enter the duration the unit should continue running before switching itself off Select 15 min up to 120 min or Off Summer Time Select On or Off depending on the year s period 7 2 5 4 TV setup Press MENU and select TV Setting The menu provides options to adjust the interaction between TV monitor and this receiver Press A W to select an option and lt P to adjust the setting Press EXIT to exit the menu TV Format You can set the display format to available settings For 4 3 TVs 4 3LB 4 3 LetterBox The full 16 9 picture will be displayed on your 4 3 TV set with black bars above and below the picture 4 3PS 4 3 Pan amp Scan The centre of the 16 9 picture will be displayed full screen on your 4 3 TV 16 9LB Combination of Letter box and Pan amp Scan For 16 9 TVs 16 9FIT Select when using a 16 9 TV set Whole picture will be shown TV mode Only PAL possible Video output This setting is relevant when the rec
6. feature NOTE If there are timers running the auto standby function will be disabled for the booked time TV Brightness Some adjustment can be made to the brightness of the picture TV Contrast Some adjustment can be made to the contrast of the picture TV Saturation Some adjustment can be made to the colour saturation of the picture These features are useful for analogue TVs in practice best left on default 50 7 2 5 5 Adv Timer Schedule In this menu you can setup the schedule for automatic switching to the defined channels at a particular date time The timer menu can be entered directly from viewing mode by pressing the BLUE button Add Press OK to add a new booking In the appearing dialogue select channel type and number the starting date and time end time repeat cycle mode once daily weekday weekend day or weekly and timer mode Schedule Recorder Tip For selecting the channel number you can use the 0 9 buttons When you have entered all parameters press OK to store your booking To edit an existing booking select that booking and press the OK button Del Press the RED button to delete a booking from the list Press OK to confirm deleting or EXIT to cancel Page Use YELLOW and or BLUE to jump quickly through your list of bookings NOTE You can set timers for programmes directly from the EPG Please refer to section 7 2 4 for more details 7 2 5 6 Parental Control In this menu you can setup your preferences
7. for Parental Control Default Password 0000 Menu Lock Use this option to prevent entering the menu and changing settings The menu items can only be altered after entering the password Channel Lock When set to On channels marked as Locked in the Channel Editor are indeed only viewable after entering the password Censorship Lock Some Satellite Providers sent an age restriction in their signals When an age is selected here and an age restriction signal higher or equal is received as the set age the programme will only be viewable when the correct password is entered The options are 4 to 18 no block total block Change Password Press OK enter the old password then enter the new password and confirm the new password Memorize it well www strong tv 23 STRONG DIGITAL TV 7 2 5 7 Update amp Backup Select System then Update amp Backup from the main menu and press OK to select Image upgrade NOTE The front panel USB port is especially adapted for Software update The upgrade can be performed with an USB device preferably an USB pen drive The USB device must have been formatted in FAT32 Download the required update file for your receiver model from the support page on our website www strong tv or contact your local dealer Unzip the file on your computer if necessary and then copy it to root folder of your USB storage device Connect the USB storage device to the front USB port of the receiver Press
8. increases the speed x2 x32 Fast forward during playback Each pressing increases the speed x2 x32 Jumps to the previous file during playback Jumps to the next file during playback Starts resumes the playback Pause the playback of multimedia files Starts Timeshift If Timeshift set to OFF it freezes the picture Stops playback of multimedia files Starts recording the currently watched programme To open the main menu in viewing mode or to go one step back in the menu Cancels the current process exits from the main menu Switches to the next previous channel in viewing mode switches to the next previous page in the channel list or navigates up down in a menu Viewing mode Displays the channel list Menu activation of the highlighted item Decreasing increasing the volume level in viewing mode navigating through the menus changing values of settings in a menu Viewing mode Displays the EPG Electronic Programme Guide Press once to display channel number name and present following information Press twice to display detailed event information Press three times for transponder signal strength information Press again to get back to viewing mode Increases decreases the volume level in TV mode To access your favourite channels Toggles between available favourite groups In playback mode opens the time setting for jumping to the playback time of choice Scrolls pagewise in lists Channel number and numeric value
9. input No function Toggles between TV and radio mode www strong tv STRONG DIGITAL TV 2 5 Installing the batteries Fig 4 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment The diagram inside the battery compartment shows the correct way to install the batteries 1 Open the cover 2 Install batteries 3 Close the cover NOTE The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 6 Using the remote control Fig 5 To use the remote control point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver if properly aligned towards the IR eye on the front panel The remote control will not operate if its path is blocked Please note Sunlight or very bright light such as TL lighting might decrease the sensitivity of the remote control 3 0 CONNECTIONS For basic setup with 1 dish 1 LNB Connect the satellite cable to the SAT IN connector on your receiver For advanced dish setup refer to section 3 3 3 1 Basic connection using an HDMI cable Fig 7 a Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs b Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to the HDMI input of you
10. 2 Channel list Press OK in viewing mode to display the channel list Press A W to highlight your channel of choice and press OK once to select the highlighted channel The channel list is equipped with a Search unction to make it easier to find channels In the channel list press GREEN and an alphabet popup will be displayed Press A W to select the first letter or letters of your channel of choice Press EXIT to leave the popup All channels beginning with the chosen letter s will now be displayed Now select the channel in the filtered list The following buttons are available in the channel list and in viewing mode GREEN Opens an alphabet banner to quickly find a channel TV RADIO Toggles between TV and radio channels BLUE While in channel list jump to top line to scroll through satellites list n viewing mode FAVOURITE To switch to one of the available favourite lists 6 1 3 Using the av buttons UP will switch to a higher channel DOWN will switch a lower channel 6 1 4 Using the C button Press the RECALL button for switching between the last viewed channels Please refer to section 7 6 for more details 6 2 Info banner At any time during viewing mode you can press the button to get information about the current channel as well as the current and following programme Press twice to view detailed info of current and following programmes Press lt P to see information about current and next programme Press thre
11. 6 8 Instant Recording 14 6 9 Timeshift 15 7 0 MAIN MENU 15 7 1 Installation 15 7 2 Channel 18 7 3 Multimedia 25 8 0 TROUBLESHOOTING 29 9 0 SPECIFICATIONS 31 This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EC and 73 23 EC RoHS 2002 95 EC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories All other product names are trademarks or registered trademarks of their respective owners STRONG 2014 Alll rights reserved www strong tv gt STRONG DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER m In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or any other equipment that generates heat to rain or intense moi
12. AL TV Move the motor to the right position for locking the signal like explained below Move Continue press lt gt for moving West East It will keep moving as long as the button is kept pressed By pressing once it will move in 1 step Move Step 1 press lt P for moving West East in 0 3 step Store Position to store the current motor position for selected satellite Goto Reference to go to the reference 0 position Select GOTO X with the lt P buttons Press GREEN to setup your location coordinates A pop up window will appear in which the following settings can be made Press lt gt to select one of the pre set locations Choose a location nearest to you If you know the coordinates of your place of residence you can choose Manual and make the following extra adjustments Choose East or West Press the 0 9 buttons to enter the coordinate Choose North or South Press the 0 9 buttons to enter the coordinate When all settings have been made press EXIT to save the data and leave the window Now press OK to enter the GOTO X menu Move Auto will move the dish to the selected satellite automatically For Move Continue Move Step 1 and Goto Reference please see explanation above SatCR Position IF Channel Center Frequency Select On if you use a SatCR LNB otherwise leave to Off When On is selected press YELLOW Setup SatCR to enter the Sat setup page Select the LNB A or LNB B Select the IF chann
13. Control Note We recommend changing of the default password 0000 to one of your preference Please refer to chapter 7 2 5 System for more details Disable a locked TV or radio programme Press the GREEN button on the programme marked with the lock symbol Rename a TV or radio programme 1 Select the programme you want to rename and press the EDIT button Then press the RED Name button An alphabet popup appears 2 Inthe alphabet popup select a character by using the navigation buttons Press OK to enter the character When you have entered the new name navigate to the Floppy Disk sign on screen and press OK on the remote control to confirm the new name 3 To store the changes and exit the menu press OK 7 2 2 Sort Here you can sort your channels in the following orders 1 Select the programme you want to rename and press the EDIT button Then press the YELLOW button 2 A popup will appear with the following possibilities A Z Z A Sort the channels in alphabetical order A Z or Z A TP Sort the channels in frequency order as found on Satellite Low High FTA Scrambled Sort the channels from Free to Air to Scrambled HD SD Sort the channels from HD to SD order Satellite Sort the channels by satellite 20 www strong tv STRONG DIGITAL TV Note The 1st time the option is selected the first possibility is executed if you select the same option again the 2nd possibility is executed Example 1st time A Z Z A wil
14. DIGITAL TV A Favourite Type window will pop up on screen The following 8 groups are available Music Sport Shopping News Movie Talk shows and two personal lists All types of Favourite List are represented with an icon Please select one or more of them Below the preview window you can see to which favourite list the programme belongs 2 Repeat the previous step to select more favourite programmes 3 To confirm and exit the menu press EXIT You will be prompted to confirm the changes Disable favourite TV or radio programme Repeat step 1 described above and deselect with OK in the Favourite Type window View favourite programme 1 In normal viewing mode no menu mode press the FAV button repeatedly to display the lists of favourite programmes Or press lt P to switch between available favourite lists 2 Select your favourite programme by A Y and press OK to switch to it 3 Now in viewing mode you can select channels from the chosen favourite group only by pressing A Y If you want to change to the main channel list toggle the FAV button in viewing mode until FAV Off is displayed Delete a TV or radio programme 1 Select the programme you want to delete and press the YELLOW button A popup window will appear to decide to delete the selected channels or to delete all channels Re scan required A cross sign will appear behind the selected channel Press OK to delete the programmes You will be prompted to confirm the
15. MENU and select System then Update amp Backup and Image Upgrade Select the correct USB device USBO or USB1 Press OK to enter the software file list Select the file containing the software image with A Y lt P and press OK to initiate the software update An attention banner will now be displayed Press OK to start the update or EXIT to cancel it Follow the instructions displayed on screen The update process will take some time After the update process has been completed the receiver will reboot and the receiver will start with the last shown channel You also can reload your previous backed up channel a favourite database see Image backup WARNING NEVER power off the receiver or remove the USB device during the software update process Doing so might cause irreparable damage to your receiver and will void your warranty Image Backup NOTE The front panel USB port is especially adapted for Image backup This menu allows you to save the channel data base with favourites the application or backup all select it in the top line of your receiver to a USB device This very convenient feature enables you to save your personal settings like Channel and Favourite lists on an USB storage device and load them back to the receiver later This feature is especially helpful after unintentional changes or factory reset In such cases just skip the Installation by pressing EXIT in Installation and select the database management menu in System Update
16. R www strong tv 31 STRONG DIGITAL TV System amp Memory Main processor NOVATEK NT78326SU Flash memory 8 MBytes System memory 128 MBytes Multimedia Video playback Supported in various formats MPG MPEG TS VOB MP4 AVI Audio playback MP3 WMA Picture view JPG BMP STRONG cannot guarantee the playback of files although extensions are listed here as it depends on codec used data bit rate and resolution Network Connector Ethernet RJ45 Wired IP setup Auto DHCP and Manual setup Connectors Ethernet RJ45 SATIN F type female SAT OUT F type female HDMI USB 2 0 Type A Connector TV SCART RGB CVBS Audio L R output with volume control S PDIF Dolby Digital Out Coaxial Power socket for external power supply General Data Supply voltage 100 240 V AC 50 60 Hz Output voltage DC 12V 2A Power consumption max 24 W typ 10 W Power consumption in standby 0 65 W Operating temperature 0 40 C Storage temperature 10 50 C Operating humidity range 10 85 RH Non condensing Size W x D x H in mm 220x 170x45 Weight 0 68 kg 32 www strong tv
17. VC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM This product contains one or more programs protected under international and U S copyright laws as unpublished works They are confidential and proprietary to Dolby Laboratories Their reproduction or disclosure in whole or in part or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited Copyright 2003 2009 by Dolby Laboratories All rights reserved www strong tv 05Aug201418 27 STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INSTRUCTION 6 1 1 Safety Instructions 6 1 2 Storage 6 1 3 Equipment Set up ri 1 4 Accessories T 1 5 Usage of external USB devices TA 2 0 YOUR RECEIVER 8 2 1 Default PIN 0000 8 2 2 Front panel 8 2 3 Rear panel 8 2 4 Remote Control 8 2 5 Installing the batteries 10 2 6 Using the remote control 10 3 0 CONNECTIONS 10 3 1 Basic connection using an HDMI cable 10 3 2 Basic connection using a Scart cable 10 3 3 Connecting multiple fixed LNBs using a DiSEqC 1 0 1 1 switch 11 3 4 Connecting to Ethernet 11 4 0 FIRST TIME INSTALLATION 11 4 1 Installation 12 5 0 QUICK GUIDE FOR USING YOUR RECEIVER 12 6 0 OPERATION 12 6 1 Changing channels 13 6 2 Info banner 3 6 3 Selection of audio language 14 64 Teletext 14 6 5 Subtitles 14 6 6 EPG Electronic Programme Guide 14 6 7 Favourite channels 14
18. amp backup 7 2 5 8 Factory setting Reset your receiver to the default factory settings Sometimes useful if the unit suddenly behaves in an unexpected manner e g after a power failure Select System then factory setting in the main menu and press OK to select Enter your PIN code or the DEFAULT PIN 0000 and press OK to confirm This option will delete all your channels and settings The receiver will reboot and start with the initial Installation menu 24 www strong tv STRONG DIGITAL TV WARNING A factory reset will permanently delete all your personal settings timers and stored channels Please consider this before you perform a factory reset Others Here you will find some simple convenient items to use Calendar Find out quickly what day is a certain date Calculator Have quick access to a digital calculator Game Select from three games follow the instructions on screen Network The unit is equipped with a network connection which can provide weather forecasts and RSS news reports via an Internet portal Connect a CAT5 cable or higher quality to the Ethernet RJ45 connector of the unit and the other end to an existing switch router modem which is connected to the internet The default setting is Auto DHCP for automatically obtaining IPs and DNS Select Manual in Network Settings to enter own settings if required Refer to the manual of your router or modem to setup properly The Ping test can be selected to check y
19. an process by pressing EXIT or MENU When the progress has been completed all found channels will be stored and the receiver will switch to channel number 1 The new found channels are added to the end of the list Satellite Finder To help you finding a satellite and peaking the dish for maximum reception this item can be very useful Select the satellite you wish to find or peak select a transponder which is known to carry a signal Use the signal and quality bar to find peak the satellite Signal strength and quality above 70 would be considered usable Information Find technical information about this receiver as model hardware and software versions This information might be asked for if you contact us 7 2 Channel Press MENU and select Channel by pressing the lt gt buttons Use the A W buttons to select the TV Channel Editor submenu Press OK to edit programme settings Press EXIT to exit the menu 7 2 1 TV Channel Editor To edit your programme preferences rename move sort skip lock delete or favourite please go to the TV Channel Editor Press A W to highlight a channel BLUE to select a satellite if more than one available Set favourite programme Your receiver allows you to store channels in up to 8 favourite lists Due to the large number of channels available on satellite nowadays this can be a very useful function 1 Select the preferred programme then press the FAV button 18 www strong tv STRONG
20. and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original 6 www strong tv STRONG DIGITAL TV packaging with its accessories Failing to comply with such packaging procedures could damage the product and void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please ollow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that the SCART HDMI cable and outdoor components are in a good condition and the SCART HDMI connections are well shielded and from good quality This manual provides complete instructions for installing and using this receiver The following symbols will serve as
21. deo on TV Audio Amplifier is Chedeitaudio is muted muted Scart cable is not insert Seart cable properly inserted correctly S bled servi 5 i E E Channel is scrambled Select alternative channel message The external USB HDD does Power consumption is e P TUSB not start too high PRY eee y HDD device Contact local Service Hotline Password forgotten or send email to our support via www strong tv 9 0 SPECIFICATIONS Demodulator Demodulation QPSK 8PSK Input symbol rate DVB S QPSK 1 45 Ms s DVB S2 8PSK QPSK 10 30 Ms s FEC decoder Auto 1 2 2 3 3 4 5 6 7 8 in DVB S mode 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 in DVB S2 mode 3 5 2 3 3 4 5 6 8 9 9 10 in 8PSK mode Video Decoder Profile level MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Input rate Max 20 Mbit s Aspect ratio 4 3 and 16 9 Pan amp Scan Pillarbox Letterbox Auto Video resolution PAL 50Hz 576i 720p 1080i 1080p Audio Decoder Audio decoding MPEG 1 Layer 1 amp 2 AC3 Downmix Audio mode Mono L R Stereo Dolby Digital Dolby Digital Plus Sampling rate 32 44 1 48 kHz Dolby and the double D symbol are registered trademarks of Dolby Laboratories Tuner Type F Type IEC169 24 Female Input frequency range 950 2150 MHz RF impedance 75 Ohm unbalanced Signal level 65 to 25 dBm LNB power 13 18 V DC 5 max 0 5 A overload protected DiSEqC versions 1 0 1 1 1 2 GOTO X Tone burst SatC
22. dow you can select the audio channel language with lt gt i Displays information about the recording the playback time and the additional function buttons Press again to remove the information window GOTO Continue playback from the set time press the RED GOTO button with the 0 9 buttons add the playback time 00 00 00 from where you want to continue the current playback and press OK STEP Press the GREEN Step button to playback step by step ZOOM Press the YELLOW ZOOM during playback to zoom in the video press again to zoom deeper with lt P A Y you can move the picture to which part you like to display ZOOM Press the BLUE ZOOM during playback to zoom out in the video press again to zoom out Mutes audio EXIT Exits from the recording manager returns to the last viewed channel This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed 7 3 1 5 Recorder Settings In the Recorder Settings menu you can setup the recording and Timeshift modes Timeshift mode IL AUTO OFF Set the Timeshift mode with lt gt H In the IH mode Timeshift can be activated in the channel view mode by pressing II AUTO In the AUTO mode the Timeshift starts immediately in the channel view mode If you switch channels the previously timeshifted programme 28 www strong tv STRONG DIGITAL TV will be deleted and the r
23. e MENU button and lt gt A to navigate through the menu 7 1 1 Satellite Setting Press the A Y buttons to highlight the satellite your dish is aimed at Its antenna settings will be shown at the right side You can enter the right side with the lt P buttons and return to the satellite list with EXIT From the Satellite Setting menu you can start a scan by pressing the GREEN button after you have made the appropriate settings or edit transponders by pressing the RED button 7 1 2 Configure the antenna settings for the selected satellite Satellite The name of the selected satellite is shown here LNB The setting is Universal LNB 09750 10600 the most used on the market Transponder Select a transponder known to carry a signal DiSEqC 1 0 Select the switch type in use 4to1 DiSEqC 1 0 or 16to1 DiSEqC 1 1 Select Tone Burst if a Legacy 2to1 switch is used Uncommitted If uncommitted DiSEqC switches are used select them here Advanced user setup Press lt gt to set the LNB power 13 18V is the setting for a Universal LNB 22K Tone Auto this setting will follow automatically Polarity 13 18V this setting will follow automatically Motor If using a motor press lt P to choose DiSEqC1 2 GOTOX Then press OK to show the menu for setting the position for your location www strong tv 15 STRONG DiSEqC1 2 GOTOX Location Longitude Direction Longitude Angle Latitude Direction Latitude Angle DIGIT
24. e times to view technical details about the current channel Press Z again or EXIT to close the information You can change the on screen duration of the info banner in the System menu Please refer to section 7 5 for more details Programme information is displayed when available Availability depends on broadcast www strong tv 13 STRONG DIGITAL TV 6 3 Selection of audio language Some channels support a choice of different audio formats and or languages To select another audio stream press AUDIO in viewing mode A list with available audio streams will now be displayed Press AY to select a stream and confirm with OK With the lt P buttons you can choose between mono left mono right or stereo audio 6 4 Teletext Your receiver includes a fully featured Teletext To access Teletext press the TEXT button in viewing mode and press the 0 9 or A W buttons to select the number of the page you wish to see Subpages if loaded and available can be selected with the lt gt buttons The coloured buttons of the remote control allow you to jump to selected pages directly as indicated on the bottom of the Teletext screen Press TEXT again or EXIT to go back to viewing mode 6 5 Subtitles Some programmes support a choice of different DVB subtitle languages Press the SUBTITLE button in viewing mode to display a list of available subtitle languages Press A W to select a subtitle language and confirm with OK 6 6 EPG Electr
25. eceiver starts to timeshift the currently watched programme In the Timeshifted content you can use 44 gt PLAY to view the earlier parts of the programme or to return to the actual point OFF The Timeshift function disabled One button recording OFF ON With lt P you can switch ON OFF the one button recording mode ON If the button is pressed in the one button recording mode the recording starts and are processed in the menu set recording length time OFF After pressing the recording length time window appears on screen With lt gt 15 min steps and A 1 hour steps you can setup the recording length time and then press again During the recording you can change the recording length time by pressing Default Recording Period You can setup the default recording time period by pressing lt gt This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed 8 0 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver Please check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact your local Service line or a STRONG dealer Alternatively you can send a support mail via our website www strong tv NEVER open or disassemble your receiver This may cause a dangerous situation and will void the warranty Problem Possib
26. eiver is connected to the TV set via Scart Select Scart RGB for the best picture quality or Scart CVBS if your TV doesn t support RGB If connected by HDMI leave it on HDMI TV Resolution If the video does not appear correctly change the setting These settings match the most common settings for HDMI 576i For analogue TVs on Scart connection 576p For digital SD TVs some digital TVs do not support this mode 720p_50Hz For digital HD TVs on HDMI connection 1080i_50Hz For digital HD TVs on HDMI connection 1080p_50Hz For digital HD TVs on HDMI connection Auto The best possible resolution available will be auto negotiated by between TV and receiver handshake when using a modern digital HD TV when connected with an HDMI cable Digital Audio Output Select digital audio output mode Settings affect S PDIF output LPCM audio from any format will be converted to digital stereo PCM format RAW audio from receiver will be sent in original digital format to be used in combination with Home Theatre Sets or Digital Amplifier with Multi Audio capability 22 www strong tv STRONG DIGITAL TV Auto Switch Off Auto Standby is a new power saving feature that helps you reduce power consumption It will switch off the receiver when no command is given for the defined period of time It is set per default to 3 hours With the lt P buttons you can select between different time intervals or Off for disabling the
27. el number according to the specifications of your SatCR LNB Note Any SatCR LNB in the chain needs a different IF channel number Select the Center Frequency according to the specifications of your SatCR LNB Note Any SatCR LNB in the chain needs a different Center Frequency Select the store button to finalize your settings or press MENU or EXIT to leave without storing 7 1 3 Satellite and Transponder edit options When in Satellite Setting use the RED TP Edit button to edit Satellites and Transponders Use lt gt to switch between Left and Right window Satellite List and Transponder List Add Delete While in the satellite name list Press YELLOW to add a new satellite In the popup window enter a satellite name with the key table press P selecting a character by using the navigation buttons Press OK to enter the chosen character When you have entered the name navigate to the floppy disk symbol on screen and press OK on the remote control to confirm the new name Select the satellites position E for East and W for West Longitude Use the numeric keys to enter the longitude of the satellite Save the settings with OK or cancel with EXIT While in the Transponder list Press YELLOW to add anew Transponder In the popup window enter the frequency symbol rate and polarity of the new transponder While in the satellite name list Press BLUE to delete a satellite from the list Press GREEN to delete the selected satellite s
28. elect YELLOW to delete all satellites Confirm deleting with OK or EXIT to cancel While in the 16 www strong tv STRONG DIGITAL TV Transponder list Press BLUE to delete a transponder from the list Press GREEN to delete the selected transponder select YELLOW to delete all transponders Confirm deleting with OK or EXIT to cancel Edit While in the satellite name list Press RED Edit to enter the Sat Edit window Select the satellites position E for East and W for West Longitude Use the numeric keys to enter the longitude of the satellite Enter a satellite name with the key table press P selecting a character by using the navigation buttons Press OK to enter the chosen character When you have entered the name navigate to the floppy disk symbol on screen and press OK on the remote control to confirm the new name Save the settings with OK or cancel by EXIT While in the Transponder list Press RED Edit to enter the TP Edit window Frequency Use the numeric keys to enter a known frequency of the satellite transponder Symbol Rate Use the 0 9 buttons to enter the symbol rate of the satellite transponder Polarity Press lt gt to select the polarization of the satellite transponder V Vertical or H Horizontal After entering all data press OK and confirm with OK or press EXIT to leave without saving Use GREEN to enter to the Automatic scan window Note Deleted satellites and transponders from the pre i
29. en Small Normal and Big Subtitle BG Choose subtitle background between White Transparent Grey and Yellow Green Subtitle Font Colour Choose subtitle font colour between Red Blue Green White and Black 26 www strong tv STRONG DIGITAL TV 7 3 1 2 Music These options available with the RED button Random On Music will be played in a random order Repeat All Repeat at the end of the list Info option Show Lyrics or Music info Display Show Equalizer or Cover Options available with the GREEN button Folder view or Thumbnail view During slide show Switch between Equalizer and Cover Options available with the YELLOW button Switch between Lyrics or Music info 7 3 1 3 Photo These options available with the RED button Random On Pictures will be shown in a random order Repeat All Repeat at the end of the list Interval Time You can adjust the slide show interval from Slow to Fast Effect On Implement a random slide show effect Options available with the GREEN button Folder view or Thumbnail view During slide show Select music to accompany your slide show Options available with the YELLOW button Big or Small thumbnails 7 3 1 4 My Recorder In the My Recorder menu you can access manage your earlier recorded events programmes With A you can highlight the recording on the left side of the screen With lt P you can scroll the pages depending on the available recordings Playback of the highligh
30. enu mode Confirm settings Fig 2 To connect to a network switch router or modem To connect to the LNB of your satellite dish for reception of satellite broadcast signal To loop through the satellite signal to a second receiver To connect to a digital or home cinema audio amplifier For connection of USB device for Multimedia use To connect to the HDMI input of your TV using a good quality HDMI cable To connect to TV using a SCART cable The receiver requires a mains voltage of 100 240V AC 50 60Hz auto selecting Please check the local power conditions before connecting the receiver to the power supply Fig 3 Switches the receiver ON Standby www strong tv STRONG Fi 8 9 Sup wy RED GREEN YELLOW BLUE SUBTITLE TEXT AUDIO ne 11 44 12 gt 13 M4 14 Dbl 15 PLAY 16 11 17 8 18 19 MENU 20 EXIT 21 AV 22 OK 23 lt gt 24 EPG 25 1 26 V V 27 FAV 28 GOTO 29 P P 30 0 9 31 OPT 32 TV RADIO DIGITAL TV To mute the audio outputs Flexible functions in OSD menu and Teletext Flexible functions in OSD menu and Teletext Flexible functions in OSD menu and Teletext In viewing mode Opens the Timer menu for easy setup timers Flexible functions in OSD menu and Teletext Selects the subtitle language Opens Videotext if available Opens the audio selection Switches between the last viewed channels Fast rewind during playback Each pressing
31. follow WARNING Indicates warning information NOTE Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold characters Move to Represents a menu item within a window Italic characters 1 4 Accessories m 1 user manual m 1 remote control m 2x batteries AAA type NOTE The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m Itis recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications multimedia recording and timeshift functions of the receiver might not work properly m Ifyou are going to use external USB HDD Hard Disk Drive please consider that it might be the case that the power specifications exceed the supported output of your receiver 5V 500mA If so please connect your USB HDD to an according external power adapter m STRONG cannot guarantee compatibility with all types of USB storage devices m Itis advised not to store important information on USB storage devices used with the receiver Always make backups of data on your USB storage device before using it with this receiver STRONG will not take resp
32. formatted correctly NOTE www strong tv 25 STRONG DIGITAL TV m STRONG cannot guarantee compatibility operation and or bus power with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit m With large amounts of data it may take longer for the system to read the contents of a USB device m Some USB devices may not be properly recognized Even when they are ina supported format some files may not play or display depending on the content m Itis possible to use already by PC formatted NTFS HDDs 7 3 1 Multimedia If there is no USB device plugged in a warning message Device is not available will be displayed When a USB device is detected you can select between Movie Music and Photo in this menu Select one of them press OK to enter the file browser and select the file you want to play Movie Video files in various formats are supported MPG MPEG TS VOB MP4 AVI Music Supported file formats are MP3 and WMA Photo Supported file formats are JPG and BMP My Recorder Manage your made recordings Recorder Settings Manage your settings for Timeshift and recordings Also available item in the menu is Remove Device This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed STRONG cannot guarantee the playback of files alt
33. hough extensions are listed here as the correct playback depends on codec used data bit rate and resolution as well Please consult the STRONG Hotline in your country to get more details 7 3 1 1 Movie In the Movie menu you have to navigate to a movie file Select the file and press OK to start playback in preview mode Select Upper Folder to go back to the parent folder During playback you can use the playback control buttons such as PLAY II E 44 gt gt K4 gt gt I You can check the file details by pressing the Z button in full screen mode To close the banner press again Press the GOTO button and enter the time moment you want to jump to with the 0 9 buttons then press OK to confirm With the 44 gt buttons you can rewind or forward playback in x2 x4 x8 x16 and x32 speed When it has fast rewound to the beginning playback of the current file will be resumed When it has fast forwarded to the end playback of the next file starts With the M4 gt buttons you can jump to the previous next video file Press GREEN to select the correct character set for subtitle files Movie Subtitle This subtitle function is only relevant in the Movie menu for movies which contain subtitle files in srt format During playback press SUBTITLE to select a language and confirm with OK During playback of Movie files you can press SUBTITLE twice to change the subtitle settings described below Subtitle Size Choose subtitle size betwe
34. l yield A Z order 2nd time will yield Z A 7 2 3 Radio Channel Editor Press MENU and select Channel using the lt gt buttons Use the A W buttons to select the Radio Channel Editor submenu Press OK to edit programme settings Press EXIT to exit the menu Refer to 7 1 1 TV Channel Editor for explanations of the menu items 7 2 4 EPG Electronic Programme Guide Please refer to section 6 6 above 7 2 5 System Press MENU and select System Select an option and press OK to enter a menu item Use lt gt to adjust the settings This menu consists of the following items Language OSD Style Clock setting TV setup Adv Timer Parental Control Update amp Backup and Factory Setting 7 2 5 1 Language Press MENU and select System then Language Select an option and press lt P to adjust the setting Press EXIT to exit the menu OSD Language Select the preferred language for the On Screen Display Audio Language Select the preferred audio language for watching TV channels If the language is not available the default programme language will be used Subtitle Language Select the preferred subtitle language 7 2 5 2 OSD Style OSD Transparency Select the amount of Transparency you prefer in 8 steps Banner Display Time Set the time out for the info banner Possible settings are Always 1 30 seconds in several steps 7 2 5 3 Clock setting Press MENU and select Clock setting The menu provides options to adjust the time and
35. le cause What to do i Mains cable is not Check that the mains cable is The display on the front i anelidoesinot light up connected plugged into the power socket P Mains fuse blown Check mains fuse No sound or picture but the front panel shows The receiver is in standby Press the On Standby button red light moge Channel is off air No sound or picture but the The satellite dish is not Try other channel s n pei Check the signal level in the receiver menu can be seen pointing at the correct 5 K Antenna Setup menu Adjust on TV screen satellite tha dish press menu on remote Channels deleted in edit 4 Scan for channels again menu www strong tv 29 STRONG DIGITAL TV No signal or weak signal intermittent reception Cables might have loosened Moisture might have entered into cables or connectors Heavy rain at present Heavy storm at present Check the cable connections LNB and other equipment connected between the LNB and the receiver or peak the dish Wait for rain storm to subside The satellite dish is not pointing at the correct satellite s Adjust the dish Ask a local satellite specialist for advice Satellite dish is too small Trees or buildings in path Signal is too strong dish is oversized Change to a larger dish Change position of dish Connect a signal attenuator to the LNB input Ask a local satellite specialist for advice
36. nstalled lists can only be retrieved by performing a factory reset 7 1 4 Automatic SAT scan Select the options if you want to do automatic scan Satellite Select the satellite you wish to scan as previously set up in the Satellite Setting menu Transponder Select a transponder which is known to carry a signal to check if reception of the satellite is possible NIT Network Information Table If selected On the receiver will use the NIT provided by the satellite provider to search for channels If selected Off the receiver will search with its pre installed transponder list Programme Select Free Only to search for Free to Air channels Select All to include scrambled channels as well Note Scrambled channels cannot be watched with this receiver Scan Mode Default TP All stored transponders in the memory will be scanned Blind Slow scan in 2 MHz steps The receiver will first scan the whole frequency band to find the transponders it can lock on After gathering all transponders it scans the transponders one by one to get all available programmes One TP The transponder selected under Transponder will only be scanned Scan Select Select All Sat to search all satellites you have selected in the Satellite Setting menu Select Single Sat to search only the satellite selected under Satellite After configuring press GREEN to start scanning with the selected settings Your receiver will now perform an automatic channel search wi
37. onic Programme Guide The Electronic Programme Guide is a very useful function that allows you to watch programme schedules and information on screen Press the EPG button to activate this guide you can also enter EPG via the menu too Press A Y lt P to select a channel and gt to move the highlight to the programme list In the programme list press A W to select or scroll through programmes and lt P to display programme information for the next previous days Press OK to display detailed information about the selected programme If there is more than one page of information press lt P to scroll Press MENU to go 1 step back EXIT to leave the EPG NOTE Availability of EPG data depends on broadcast Booking a programme from the EPG Select a programme as described above Press YELLOW Book when you have selected a programme This will lead you to the Timer Schedule menu All details are already filled in for you Save the timer with OK To display the list of booked events just press the BLUE button while being in viewing mode Press RED or GREEN or P P to jump 10 places in the list A total of 32 events can be booked 6 7 Favourite channels Press the FAV button to access your favourite channels and to toggle between available favourite groups Please refer to section 7 1 1 for details on how to create favourite lists 6 8 Instant Recording Your new receiver allows you to make an instant recording of the programme you are watching
38. onsibility for any loss of information or circumstances caused by loss of information m STRONG cannot guarantee the playback of all files although extensions are listed as it depends on file size codec bit rate and resolution www strong tv 4 STRONG DIGITAL TV m Please ensure that either the USB device is already formatted to FAT FAT32 or format the USB device via your receiver refer to chapter 7 3 Multimedia for details This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been installed 2 0 YOUR RECEIVER 2 1 Default PIN 0000 2 2 Front panel ay w 8 9 USB LED display Power button Standby indicator MENU Fig 1 To connect a USB storage device for multimedia functions or software updates Shows channel number in operation and time in Standby mode Switch the receiver to Standby or On Shows power state of the receiver Green LED receiver is switched on Red LED receiver is in standby mode Open the main menu Remote control sensor CH CH VOL VOL OK 2 3 Rear panel p N SO Ethernet SATIN SAT OUT S PDIF coaxial USB HDMI TV SCART Power cord 2 4 Remote Control A Receives the signal from the remote control To change channels without using the remote control Navigation functions in menu mode Decrease Increase audio volume Navigation functions in m
39. orrectly 4 0 FIRST TIME INSTALLATION After all connections have been made properly switch on your TV and make sure the receiver is connected to the main power If you are using the receiver for the first time or restored to factory default the Installation menu will appear on your TV screen Press the lt P buttons to select the OSD Language of your preference Country Select your country Pre installed List Some countries come with a pre installed channel list If not available for your country the item is not selectable Video Output Select the output you prefer to use TV Format Select between 16 9FIT 16 9LB and 4 3LB or 4 3PS Start Search If the pre installed list is selected the receiver will jump to the first channel in the list If no pre installed list available the Satellite Setting page will appear NOTE If Germany is selected as country a German pre set channels list from ASTRA 19 2E will be installed The pre installed list will work with a single Universal LNB LO 9750 10600 If another type of LNB is used you need to setup the LNB in the Installation Menu Satellite Setting You can continue with the nstallation menu to scan and install further channels as described below or go to viewing mode by pressing the EXIT button to start enjoying the pre installed channels immediately www strong tv 11 STRONG DIGITAL TV 4 1 Installation 4 1 1 Satellite Setting Press A to highlight the satellite yo
40. ost from the device www strong tv 27 STRONG DIGITAL TV Select YELLOW Select For selecting multiple recordings for further process highlight the recording with A Y and then press the YELLOW Select button to select the recording A check mark symbol appears next to the recording s name Repeat the steps to select your recordings for further process Delete BLUE Del For deleting recording s highlight the recording which you want to delete with AY and then press the YELLOW Select button to mark select the file s then press the BLUE Del button A confirmation request message pops up for deleting the selected file s select the delete or the cancel option with lt P and press OK In playback mode the following functions and buttons can be used PLAY OK W gt gt 44 44 gt gt I SUBTITLE TEXT AUDIO i GOTO 0 9 STEP ZOOM ZOOM EXIT PLAY Starts resumes playback OKIE Pauses resumes playback E Stops playback and returns to the recording manager from full screen playback a With 44 gt gt you can rewind or forward playback in x2 x4 x8 x16 and x32 speed Ka dpi Jump to the previous next video file SUBTITLE Displays the subtitle selection window if the recording contains subtitles you can select the subtitle language to display TEXT If the recording contains TELETEXT it displays the recorded teletext content AUDIO If the recording contains multiple audio tracks in the audio selection win
41. our connecting once done Weather You can setup several cities to monitor 5 day weather forecast on regular basis Up to 4 cities can be monitored around the globe Select pre defined cities or enter your own preference with the RED search button and use the key pad to enter Select the floppy disk symbol to save Press YELLOW to save all cities Delete a city with BLUE then press YELLOW to save After setting up for the first time exit from the Weather app and enter again to see the forecasts Use lt P to scroll through the cities To edit cities again press YELLOW RSS Feed Enter your own preferred RSS feeds or use the default settings with RED Start editing by using the lt P buttons and the appearing key pad Be sure to save with the floppy disk symbol Press OK to connect to a selected feed Use the AY lt gt buttons to scroll through the content Note Applications available in our product s may change from time to time and are not guaranteed to work at all times They are subject to technical commercial and or license related changes 7 3 Multimedia NOTE The back panel USB port is especially adapted for Multimedia Press MENU and select Multimedia The menu provides the Multimedia feature for playback of Movie Music and Photo The different file formats listed below are supported In this menu you can make video and photo configurations The unit supports USB devices with FAT32 format Make sure your USB device is
42. r TV c Plug the power cord to a suitable wall outlet 3 2 Basic connection using a Scart cable Fig 6 a Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs b Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and the other end to the SCART input of your TV c Plug the power cord to a suitable wall outlet 10 www strong tv STRONG DIGITAL TV 3 3 Connecting multiple fixed LNBs using a DiSEqC 1 0 1 1 switch Fig 8 a Connect the LNBs of your fixed antenna to the inputs of a DiSEqC 1 0 1 1 switch b Connect the output or to receiver connector of the DiSEqC 1 0 1 1 switch to the SAT IN connector on your receiver c Refer to section 3 1 or 3 2 for TV and mains connections d Refer to section 7 3 1 1 for Satellite Settings 3 4 Connecting to Ethernet Fig 9 Connect a CATS cable or higher quality to the RJ45 connector of the unit and the other end to an existing switch router or modem The default setting is Auto DHCP for automatically obtaining IPs and DNS Select Manual in Menu NetworkNetwork Settings to enter own settings if required When setting up manually you need to provide a unique IP address Netmask Gateway and DNS for your receiver Refer to the manual of your router or modem to setup properly The Ping test can be selected to check your connecting once setup c
43. sture to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc m Do not use a damaged power cord It may cause a fire or an electric shock Do not touch a power cord with wet hands It may cause an electric shock m When the receiver is not used for a long period of time you should unplug the power cord from the wall socket m Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution and only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock m Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m Never try to open the receiver It is dangerous to touch the inside of the receiver due to high voltages and possible electrical hazards Opening the receiver will void the warranty of the product Refer all maintenance or servicing to suitably qualified personnel m When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m Itis a necessity that you only use an approved extension
44. ted recording will start after a few seconds in preview mode on the right side of the screen To start playback in full screen press OK If multiple USB devices are connected press UP to highlight the USB USB1 1 menu point and select the USB device with lt P and press OK It will display the available recordings from the selected USB device The following functions can be used with the colour buttons Rename Device Select Del Rename RED EDIT Select or highlight the recording which you want to rename with A Y lt gt then press the RED Edit button The ABC window appears on the screen In the ABC window you can use A W lt gt to move the cursor To add the selected character or process the selected function press OK When you have renamed your recording select the Floppy Disk symbol and press OK USB Device GREEN DEVICE You can check the capacity and format the connected USB devices from this menu point Press the GREEN Device button The USB device menu displays With A Y lt gt you can select the Slot Partition and the Format option Below the selected device partition information is displayed Free space Used space Total space If you want to format the selected device select the partition highlight the Format option with A and press OK A confirmation window pops up to continue and proceed formatting Select an action with lt gt and press OK Please note that after formatting all currently stored data will be l
45. th the scanning progress shown on screen During the channel search you can quit the scan process with EXIT or MENU When the www strong tv 17 STRONG DIGITAL TV progress has been completed all found channels will be stored and the receiver will switch to the first found channel 7 1 5 Manual scan Scanning by transponder Select the options if you want to do a manual scan Advanced users Satellite Select the satellite you wish to scan from as previously set up in the Satellite Setting menu Frequency Enter a known frequency of a satellite transponder with the 0 9 buttons on the remote Symbol Rate Enter the symbol rate of the previously set satellite transponder with the 0 9 buttons on the remote Polarity Set the polarization of the previously set satellite transponder V Vertical or H Horizontal NIT Select On if you want to do a scan starting from the previously set satellite transponder according to the Network Information Table as offered by the Satellite Provider Select Off to scan just the one transponder Programme Select Free Only to search for Free to Air channels Select All to include scrambled channels as well Note Scrambled channels cannot be watched with this receiver After configuring press GREEN to start scanning with the selected settings Your receiver will now perform a channel search with the scanning progress shown on screen During the channel search you can quit the sc
46. to chapter 7 3 for further instructions 5 0 QUICK GUIDE FOR USING YOUR RECEIVER We at STRONG understand that you can t wait to enjoy your new HD receiver The following quick guide will make you familiar with the basic operation of this device We do however advice you to read the full manual to get the best performance from your STRONG HD receiver To turn your receiver ON or to Standby press the button on the remote control Choose channels with the A W buttons Alternatively you can also enter the channel number with the 0 9 buttons on the remote control or press OK in viewing mode to display the channel list The volume can be adjusted with the lt P buttons 6 0 OPERATION In viewing mode several features are available to make watching TV a true pleasure This paragraph describes these features Please also read chapter 7 to get familiar with the menu of your new receiver 12 www strong tv STRONG DIGITAL TV 6 1 Changing channels There are different ways to change channels with your new receiver Via direct access m Via the channel list m Viathe AY buttons m Via the button 6 1 1 Direct access To gain direct access to a certain channel simply enter its number with the 0 9 buttons on the remote control Channel numbers can be up to four digits long Entering a number with less than four digits is possible Just wait a few seconds or press OK and your receiver will switch to the selected channel 6 1
47. ur dish is aimed at When using a multi feed antenna with more than 1 LNB select the satellites your antenna is adjusted for by pressing the OK button and set the appropriate DiSEqC input for the LNBs Astra 19 2E and Hotbird 13E are pre selected on DiSEqC 1 and 2 The scan process will then search on all selected satellites If you have a non standard setup then please refer to section 7 3 1 2 of this manual Configure the antenna settings for the selected satellite 4 1 2 Signal Adjust The signal quality bar on the bottom of the screen allows you to fine tune the alignment of your antenna for optimum reception Adjust your antenna for maximum possible signal quality When the signal cannot be improved anymore fix the dish on this position and press the GREEN Scan button to continue 4 1 3 Automatic SAT scan Press A Y lt P to highlight the options of choice and press GREEN Scan to start the channel search It is recommended to use the default settings For details please refer to section 7 3 1 3 of this manual Automatic SAT scan 4 1 4 Channel Search Your receiver will now perform an automatic channel search When the process has been completed all found channels will be stored and the receiver will switch to the first found channel You are now ready to enjoy your new receiver NOTE If no channels were found during the automatic channel scan the receiver will return to the Installation menu Please select your language again and refer
Download Pdf Manuals
Related Search