User Manual - ATP Instrumentation
Contents
1. User Manual 2 Introduction Mini Anemometer The Mini Anemometer is designed for all kinds of air velocity and temperature measuring projects including quality control environmental tests maintenance of ventilation and air conditioning systems health and safety checks etc It is widely used for air velocity and temperature measurement at constructional engineering sites factories schools supermarkets and households etc 3 Specifications Please read this user manual thoroughly before using this unit and keep it for your future reference ANEMOMETER CE 1 A Safety Temperature accuracy 1 5 C 2 7 F Read the following safety information carefully before attempting to operate the meter m s Km h Knots MPH ft min Use the meter only as specified in this manual otherwise the warranty may be invalidated igi Auto power off Auto power off after approx 15 minutes of inactivity Environment conditions Altitude lower than 2000 meters Power supply 1x 9V battery RH lt 90 Non Condensation Battery life at least 30 hours Operating Temperature 20 60 C Operating conditions Temperature 20 60 C Humidity 10 90 RH Maintenance Storage conditions Temperature 20 60 C Humidity 10 75 RH Repairs or servicing should only be performed by ATP Instrumentation Ltd 175 x 55 x 38mm Cleaning Wipe the unit with a dry soft cloth Do not use abrasives or solvents on this Weight 909 instrument Safety Symb2. cally turn off after approx 30 seconds of inactivity 6 MAX MIN amp Measurement Units Measurement Units Press and hold the button for at least 3 seconds the measurement units will convert from m s Km h Knots MPH to ft min in turn MAX MIN Press m button one time until MAX icon appears on the LCD to view the current MAX reading press the button again MIN icon will appear to view the current MIN reading To exit the MAX MIN mode press the AX button again 7 C F temperature units When the meter is powered off press and hold the AXIMID button then power the meter on After the LCD displays release the button and the temperature units C F will alternate 8 Notes 1 This meter has already been calibrated before delivery 2 Repairs or servicing should only be performed by ATP Instrumentation Ltd 3 Do not use it in areas with high temperature of humidity 4 Wipe the unit with a dry soft cloth Do not use abrasives or solvents on this instrument 5 Remove the battery when the meter is to be stored for long periods of time to avoid battery leakage 7 ATP Instrumentation Ltd Tournament Way 9 Accessories Ashby de la Zouch Leicestershire User Manual ATP E n LE65 2UU 9V battery Sales Tripod Optional 01530 566 800 sales atp instruments co uk Repairs amp Calibration 01530 566 804 technical atp instruments co uk
3. ol CE Complies with EMC 4 Meter Description 1 Vane sensor 2 MAX MIN button 3 LCD display 4 Power ON OFF button 5 1 Tripod bush il es OV BATTERY NEDA 1604 EC 6F22 6 Battery compartment 5 LCD Display Description 1 Low battery indication 2 Auto power off icon 3 Temperature unit C 4 MAX icon MIN icon 6 Temperature unit F 7 Velocity unit Knots Velocity unit m s 9 Velocity unit Mph Velocity unit km h 4D Velocity unit ft min 12 Velocity readings 43 Temperature readings 6 Preparation 1 Open battery cover and install a 9 volt battery in the battery compartment 2 When the low battery icon n appears replace the meters battery 3 Place the vane sensor towards the air stream to start measuring the air velocity and air temperature 7 Operation Instruction 1 Power ON Turn the meter on by pressing the Kop button for 1 second until the LCD is lit then release the button 2 Power OFF To turn the meter off press and hold the Wo button for approx 3 seconds until the LCD switches off then release the button 3 When the low battery icon lt I appears replace the meters battery 4 Auto power off the meter will automatically turn off after approx 15 minutes of inactivity 5 Backlight After turning the meter on momentarily press the Wo button and the backlight will turn on It will automati
Download Pdf Manuals
Related Search