USER'S MANUAL - dreamboxeshop.co.uk
Contents
1. 1 Press Menu button to display main menu go to the Channel sub menu and select the option Add Channel and press OK Use A or vw to select edit satellite then setting the LNB Press exit or menu button back to the previous menu If already there are useful transponder in the meter please use or gt to select it to be parameters as desired when you adjusting the dish If there is not presetting transponder in the meter please go the Add TP menu to add the TP frequency symbol rate and polarity 2 Adjusting the antenna Azimuth and elevation according the signal intensity and signal quality which are showed in the meter Stop to adjust the antenna when signal quality to be max value attention when you start to adjust the antenna please set the signal intensity to be max value B2 If there are desired channels in the meter please select this channel and press info key in the keypad to show the information of the current channel including the signal strength and signal quality of this transponder then please adjust the antenna according to the step 2 of B1 before this step please make sure the LNB frequency is correct otherwise we suggest you adjust the antenna according the step B1 05 C The Menu Operation Once you have installed and connected the cables of the receiver press menu key on the Keypad to display the Main Menu This menu consists of 4 menu options as shown below Channel Installation System T2. TV type by pressing the arrow keys If the source program is PAL TV set PAL source program is NTSC TV set NTSC J y i A a A A MA Al Bg i 18 USER S MANUAL THE PROFESSIO NAL EQUIPMENT USER S MANUAL 3 3 Auto Shut Down To set the time for stopping work automatically 3 4 OSD Setting Menu Color Allows you to select the desired color for menu Transparence You can adjist the transparency level by using the arrow keys From 0 to 80 lo 19 3 5 Parent Lock This function allows you to lock the channel with a password in order to prevent children from accessing the channel You can also protect your installed data and information using the Install Lock If the STB Panel Lock item is set to OFF the keys of the front panel is invalidation The default password is 0000 When the correct password is entered the selected menu opens automatically 4 Tools 4 1 Information You can get the information of the current channel from here 120 USER S MANUAL C THE PROFESSIO NAL EQUIPMENT USER S MANUAL 4 2 Satellite Guide 1 Local Longitude Enter the correct value of local longitude 2 Local Latitude Enter the correct value of local latitude 3 Satellite Longitude Enter the longitude of the current satellite 4 Start Press OK The orientation and elevation of the antenna will be display on the screen
3. o A EQUIPMENT o USER S MANUAL 1 In the edition channels screen press SAT in the remote control 2 The cursor will jump to the title at the top of window 3 Press amp W to select the desired one from the stored satellites The channel list will show all programs under the current satellite 4 Press OK to go back the channel list 1 2 Add Channel In the Channel menu select the option Add channel and press OK Satellite Press OK to display the satellite list Select the satellite you want to check with pressing A Y You can also press q gt to select the satellite TP Transponder select the desired one from the pre program options TP Frequency Input the value by using the numeric keys Symbol rate Symbol rate of the current transponder Polarization Vertical or Horizontal polarization Search select the desired mode for searching dl Edit Satellite 1 Satellite Press OK to display the satellite list Selet the satellite you want to check with pressing gt You can also press AV to select the satellite 2 LNB Type Select proper LNB type using the arrow keys according to your physical LNB type 3 LNB Freq 1 2 Enter the proper LNB frequency referring to your LNB using the numeric keys on the Keypad 4 LNB Power Select the desired option f your STB is connected to another receiver through LOOP THROUGH support you should check which receiver is connected directly to the LNB In case th
4. 2 LNB Type Select proper LNB type using the arrow keys according to your physical LNB type 3 LNB Freq 1 2 Enter the proper LNB frequency referring to your LNB using the numeric keys on the Keypad 4 LNB Power Select the desired option If your STB is connected to another receiver through LOOP THROUGH support you should check which receiver is connected directly to the LNB In case the other receiver is drectly connected to the INB then select OFF 5 22K 22KHz control is automatically set for each LNB alternative f universal is selected 22KHz control should be off state 6 DiSEqC Select the port number to get the RF signal from the LNB which is connected to V swiching box 7 Positioner To set satellite position 16 USER S MANUAL THE PROFESSIO C USER S MANUAL NAL EQUIPMENT 2 4 Delete Satellite 1 Press OK to enter the Delete Satellite menu 2 Locate the satellite you want to delete and press OK The satellite will be marked with the symbol X 3 Repeat step 2 with those satellite you want to delete 4 To confirm the deletion press EXIT to exit the edition satellite menu You will see a confirmation message 5 Pressing the arrow keys select option OK and press OK to confirm the deletion or select Cancel and press OK to cancel 17 0 gtalsatelte meter 3 System 3 1 Language Select the desired language for menu 3 2 TV System You can set the
5. 21 digt al satelite meter 4 3 Default Value This option allows you to restore the parameters to the original state Be careful when you use this option because you can lose data 4 4 Software Upgrade By this function you can upgrade software via RS 232 serial port Upgrade Mode Select the desired upgrade mode from code logo programe list and all digt al sat ellte meter THE PROFESSIO USER S MANUAL _ USER S MANUAL NAL EQUIPMENT Chapter III Specifications Fully DVB compliant i Symbol rate 2Mbps 45Mbps LNB Tuner input Demodulator SCPC and MCPC Yes e A System resource 720X 576 720 X480 MPEG 1 layer 182 Video decoder MPEG Audio Type Mono IT EC 1950 mA O o Suply T2 WOHE ANO e OV o3digtalsatelte met er Handling Precautions and Prohibitions of Battery in Sat Meter Warning You are using Lithium ion batteries or Nickel metal hydride batteries in the machine now so please don t work under high temperature or high pressure conditions If the following items happened abnormal chemical reaction may occur which will lead to the battery overheat emit smoke ignite and or burst 1 incinerate and dispose the battery in fire or heat it 2 pierce the battery with a nail or other sharp objects strike it with a hammer or step on it 3 immerse the battery with water or connect the positive and negative terminals with a metal objects such as neck
6. 4 0 9 Press to enter required numbers in the input box or select a channel to watch 5 PGUP Open or close the voice when signal is locked 6 Exit Press to return to the previous menu or escape from the item 7 AV gt Move cursor up down left right Page up down volume 8 Mute Press to temperarity cut off the sound of the program 9 Scan Press to enter the Auto Scan menu 10 Sat Press to display the satellite list of searched channels 11 Back Moves to the previous channel 12 Pause Press to switch between Pause and Play 13 Press to swith between Operation and power off modes 14 Info Press to show information of the current channel 15 Power To switch on off the battery power 16 Charge port To connect with the charger cord 17 USB Port Connect to PC to upgrade 03 Importance notice for safety reason the battery power is switch off by the facotory so before using this meter or before charging the battery plese doulbe make sure the battery power switching key should be on status Note Please use only the Adaptor supplied with this Finder if you use other adaptor maybe it will burn the battery 04 USER S MANUAL o Dtos NAL EQUIPMENT USER S MANUAL B Quick operation guide Connect with dish then turn on the meter and go to the menu setting B1 If there is not desired channel list in the meter go on the next step otherwise direly to the step B2
7. USER S MANUAL USER S MANUAL o THE PROFESSIO INAL EQUIPMENT O USER S MANUAL DIGITAL SATELLTTE METER USER S MANUAL Please read this manual carefully before using your meter for the first time The technical specifications and operating methods included in this manual are subject to changes without notice In case of any inquires after a period of usage please contact the manufacturer Please charge the battery before using your meter for the first time Recommend 5 hours Contents Chapter I Introduction vascas 2 Chapter I Fic noi aise sasncscasslendsasiseceisaierounrencetaavecctanveneas 2 ron a daa 2 B Quick operation guide suso icas 2 C The Mem Operations iodo 5 E a 6 2 Install JGO n 13 SS YS E cesta ey nce casos eae E E E AE 17 Po e eee 19 Chapter TIL Specification rc tata iii 22 01 0 Chapter I Introduction This meter is simple and convenient for setting and aligning a satellite dish Using the parameters of satellite you can set and align a satellite dish quickly easily and accurately Chapter II Function A Front Panel 15 2 5 6 3 7 8 4 9 10 11 PAUSE INFO 13 12 14 16 17 102 USER S MANUAL 4 aso sf o USER S MANUAL 1 Menu Press to display the main menu on the screen 2 F1 Turn on or off the LCD screen 3 F2 In standby mode when you can not turn off the finder through press and hold F2 key for 2 seconds to force shutdown the finder
8. e other receiver is directly connected to the LNB the select OFF 5 22K 22KHz control is automatically set for each LNB alternative lf universal is selected 22KHz control should be off state 6 DiSEqC Select the port number to get the RF signal from the LNB which is connected to DiSEqC switching box 7 Positioner Satellite position If your antenna is potitioned incorrectly you will not receiver signal from the satellite So 12 NAL EQUIPMENT USER S MANUAL USER S MANUAL 2 THE PROFESSIO the STB provides DiSEqC 1 2 to let you have exact information to direct you antenna toward a satellite Satellite Select the desired satellite TP Select the desired transponder Position No amp Save Select the position No or null Limit setup Setting of limits for the antenna Movement The satellite can now be turned into the desired direction using the arrow buttons Continuous Move The satellite can be continuous moved to the desired direction Recalculation Press OK to recalculate Go to Reference A dtarting point for the satellite search function can be selected by pressing the OK button Add TP Add a new transponder for the current satellite Delete TP Delete the current transponder 13 0 9t a 2 Installation 2 1 Auto Scan 1 Press OK to enter the Auto Scan menu 2 Press OK to deploy the satellite list Select the satellite you want to scan with pressing A Y The sate
9. laces hair pins etc Notice The battery is only applicable to the charger which supplied or appointed by the manufacturer of this machine The charging time should be minimum 5 hours for the first time and it should not be charged over 12 hours after the first time Please keep your machine off when the battery is charging The battery should be stored within a temperature range of 0 to 40 When stored for a long period charge the battery at least once per half month so as to prevent over discharge The battery is expendable Handling Improper setting of new battery may lead to the battery burst Please use the battery only supplied by the manufacturer if you want to change a new battery Please do not put the battery in fire or dispose it together with garbage Please contact the waste administrative institute in your place to get the nearest battery collection station digit al sat ellte meter
10. llite will be marked with the symbol X You can also pres to select the satellite 3 Select the desired mode for searching and then press OK to start search channel automaticly 4 You can also enter the Edit satellite to reset the current satellite 114 15 USER S MANUAL OW __ THE PROFESSIO NAL EQUIPMENT USER S MANUAL 2 2 Add Satellite 1 Satellite Press OK to enter the submenu and rename the name of the new satellite Press MENU to exit this menu 2 LNB Type Select proper LNB type using the arrow keys according to your physical LNB type 3 LNB Freq 1 2 Enter the proper LNB frequency referring to oyur LNB using the numeric keys on the Keypad 4 LNB Power Select the desired option If oyur STB is connected to another rceiver through LOOP THROUGH suppor you shoule check which receiver is connected directly to the LNB In case the other receiver is directly connected to the LNB the select OFF 5 22K 22KHzcontrol is automatically set for each LNB alternative lf universal is connected directly to the LNB In case the other receiver is directly connected to the LNB the select OFF 6 DiSEqC Select the port number to get the RF signal from the LNB which is connected to DiSEqC switching box 2 3 Edit Satellite 1 Satellite Press OK to display the satellite list Select the satellite you want to check with pressing AW You can also press d P to select the satellite
11. ools JE se gt 3E Use the lt P keys to move the cursor up or down in the menu Use the OK key to confirms a selection To escape the menu system at anytime press EXIT key 1 Channel If there are some programs stroed in the receiver user can press OK enter the menu 1 1 TV Channel You can manage the stored channels TV and radio channels deleting shorting locking skipping them very easily Access to the editing channels menu through the main menu 1 Press MENU to enter the main menu 2 The option Channel will be highlighted 3 Select TV Channel to manege the TV channels or Radio 06 USER S MANUAL THE PROFESSIO NAL EQUIPMENT USER S MANUAL Channel to manage the radio channels Press OK you will see the edition channels menu To delete a channel 1 In the edition channels screen press 1 in the Keypad 2 Locate the channel you want to delete and press OK The channel will be marked with the symbol X 3 Repeat step 2 with those channels you want to delete 4 To confirm the deletion press EXIT to exit the edition channels menu You will see a confirmation message 5 Pressing the arrow keys select option OK and press OK to confirm the deletion or select cancel and press OK to cancel 07 To move a chamnel 1 In the edition channels menu press 2 in the Keypad 2 Pressing the arrow keys select the channel you want to move and press OK You will see
12. the channels marked with the symbol 3 Pressing the arrow keys locate the point you want to put the selected channel and press OK 4 Repeat steps 2 and 3 for those channels you want to move To add channels to the favorite lists 08 NAL EQUIPMENT C USER S MANUAL USER S MANUAL O THE PROFESSIO 1 In the edition channels screen Locate the channel you want to favorite and press 3 in the Keypad 2 You will notice the sub menu the favorite order in screen 3 Select the desired one of the six favorite order and press OK 4 The channel will be marked with the symbol 5 Repeat step 1 3 and 4 with those channels you want to favorite To edit the channel 1 In the edition channels screen Locat the channel you want to edit and press 4 in the Keypad 2 You will notice the sub menu in screen 3 You can press the arrow keys to select and use the numeric keys to input the value of parameter 4 Select save to confirm them otherwise select EXIT to to back 09 To delete the channel 1 In the edition channels screen press 5 in the Keypad 2 All channels will be marked with the symbol X 3 To confirm the deletion press EXIT to exit the edition channels menu You will see a confirmation message 4 Pressing the arrow keys select option OK and press OK to confirm the deletion or select cancel and press OK to cancel To change satellite 10 USER S MANUAL
Download Pdf Manuals
Related Search