R5111/R5113/R5115/R5117 2-channel receiver User manual
Contents
1. R5111 R5113 R5115 R5117 user manual R5111V2 Version AO R5111 R5113 R5115 R5117 2 channel receiver User manual I Safety Instruction 1 For security please read instructions carefully before initial operation making sure that the power is off before connection 2 Please clear the memory before initial operation Ref Erasing ALL learned memorized Transmitters 3 Do not learn the remote control when motor is operating in order to avoid mis operation 4 The received signal may be interfered by other communication devices e g the wireless control system with the same frequency range It is forbidden to control the high risk coefficient equipment system e g cranes 6 It is used only for the manual remote control and wireless control equipment system which must not endanger life or property during running failure or its security risks have been eliminated 7 It should be applied in dry indoor place or in the electric appliance place 8 If connected wire is too long the receiver may work unstable un II Technical parameters ia s SER OE p Latch Non latch iieii 1 Working voltage 12 24VAC DC 2 Temperature range 20 C to 60 C 3 Working frequency 433 92MHz 4 Stored transmitters Rolling code 30 300PCS fixed code 60 600PCS 5 Relay contact load capacity 1A 30V DC i z x DC AC AC E 5 III Connection Instruction e FF SAAS SAN SA SAAS 2 24 NOL COMI NO2 COM2 12 24Y Nol omii O couz AC DC IV Set up and working pr2. n on Old one Old one New one the control board 4 5 1 Non latch J2 at OFF 4 5 2 Latch J2 at ON STOP STOP Receiver COM1 NO1 OFF COM2 NO2 OFF Receiver COM1 NO1 OFF COM2 NO2 OFF Press transmitter Press transmitter Press transmitter Press transmitter button 2 button 2 button 1 button 2 Receiver COM2 Receiver COM1 Receiver COM2 NO2 ON NO1 ON Receiver COM1 NO1 ON NO2 ON Release transmitter Release transmitter Press transmitter Press transmitter button 2 button 1 button 1 button 2 V Model list Model 12 24 ac DC R5111 R5113 R5115 R5117 Frequenc 435 92Nhz Code Rolling code Fixed code Transmitter stored 30 300 6b 600
3. ocess AC DC 4 1 Learning transmitter Press the learning button of the receiver then LED is red Press any one of the transmitter twice times LED flickers and continues on several seconds then off It is indicated the learning is successful 4 2 Deleting transmitter Press the learning button for a long time the indicating lamp is red for 8 seconds and then off release the learning button LED is red for 2 seconds and then off complete the deleting transmitter 4 3 Latch and non latch It is non latch when short circuit cap disconnect It is latch when short circuit cap connect 4 4 Self learning function Use the transmitter that already has been learned as old transmitter press button 1 and button 2 at the same time and then press button 2 to let the receiver enters into the learning process In this way new transmitter can be learned refer 4 1 without press the learning button S1 on the receiver 4 5 Remote control The remote that finish the learning process can control the receiver with pressing the button STEP 3 STEP 1 STEP2 Press the same button on 2 Use the trasmitter 2 h b 2 ee a then press button the new transmitter at already has 3 3 4 3 4 to let LED twice The learning been learned as old turns into red f process done In this way transmitter press New transmitter ad i new transmitter can be button 1 and button can be learned learned without pressing 2 at the same time the learning butto
Download Pdf Manuals
Related Search