USER MANUAL - Hisense UK
Contents
1. Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV The TV will turn off automatically after 10 15 minutes if there is no signal Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote The TV is not receiving all channels Make sure the Antenna Cable cable is connected securely Automatic scan TV channel through the CHANNEL menu setting If you are receiving the signal through Aerial make sure the antenna is positioned correctly and the signal strength is good 39 Compression of video contents may cause picture distortion especially EE on fast moving pictures such as sports and action movies macroblock error small block dots pixelization A low signal can cause picture distortion This is not a TV issue A Mode No2. E Setting the volume Sound off Press the sound off button m Sound on Press the button again or use the vo button d Adjusting the volume _vo Adjust the volume up down i E Select channel e CH Go one channel up down Celia Select channel using the numerical keys 4 Ise Directly jump to channel 0 9 7 C9 Press the 1 digit 2 digit 3 digit number of the channel you want o to watch D God Select channel using the channel list Press the button to call the channel list A V Select channel OK Watch the selected channel 11 2 Select Input Source To change the input source on your TV press the button on your remote Settings z8 Source HDMI 1 gt C 3p Press OK to select source 38 Source HDMI1 gt E Zoom IO Mor Settings Source x TV go AV M COMPONENT Press the A V to select your desired input and then press OK to confirm mg SCART VGA Q HDMI 1 3 3D Images The 3D function is only applicable to the products which support it Read the safety instructions regarding 3D images before watching any 3D content 3D glasses must be worn to view 3D images How to view 3D images 3D compatible Blu ray disc Connect a 3D compatible Blu ray player via a High Speed HDMI cable If the input mode is not switched automatically use the AV butt
3. Visually Impaired Select Visually Impaired in the Audio Type to activate the description sound track if available dr Visually Impaired e Speaker Headphone Select the device which outputs sound e Volume Adjust the volume of the description sound track 20 Lip Sync Ei Adjust the picture and sound to play at the same time Lip Sync Sound Reset Ek Reset all sound setting to factory default Sound Reset 9 Setting Options Channels Here you can adjust the settings related to selecting reception type perform channel scans and edit and sort channels and make favorite lists For explanation of the setting in the Channels menu see page Setup CS Picture EI S Sound 2O Channel Network mm System About TV Explanation of the channels settings Reception Type GA Select a preset reception type Antenna Cable The function is only supplied for some countries which support the Cable Reception Type Automatic Scan CA Use this to automatically find and store all available channels Automatic Scan ere Scan mode select DTV scan ATV scan or DTV ATV scan Press Scan to start searching for channels 21 Analog Manual Scan Q Allows you to make manual fine tuning of channels in ATV mode MEENE A Start frequency MHz Input the frequency using the numeric buttons Analog Manual Scan Start frequency 42 00 e Colour System e
4. Colour System NTSC Select the colour system from the following options Auto PAL SECAM and NTSC Sound System B G Scan Up e Sound System Select the sound system from the following options D K B G I L L Scan Down e Scan Up Scan for analog channels above the start frequency e Scan Down Scan for analog channel below the start frequency DTV Manual Scan Allows you to make manual fine tuning of channels in DTV mode Q DTV Manual Scan DIAA VENEET IA e Channel Number Select the channel number e Bandwidth Display the bandwidth of the selected channel Bandwidth 8 MHz Pecan Select to start manual tuning e Signal Level Displays the intensity of the current signal e Signal Quality Displays the quality of the current signal 22 Edit Channels Edit Channels e Channel Skip Select to skip channels Edit Channel Edit the channels in the favorite list Move For Favorit EE Press the OK button to add the selected channel to the favorite list Edit Channels e Move For Favorite Press the OK button to remove the selected channel from the list Common Interface The common interface allows the use of a Cl module This module can enable you to watch scrambled pay TV services The CI module and smart card can be obtained from your local service provider e Common Interface Export To USB Allows you to make manual fine
5. Options Picture Here you can adjust the settings related to the picture output on your TV Picture gt 3D Sound Channel Network System About TV Explanation of the picture settings RA Picture Mode ale O oes Brightness Contrast ER Sharpness Picture mode Select your preferred picture mode from the following options Standard Cinema Natural Game Dynamic Custom Brightness Adjust the overall luminance of the picture Set the brightness so that the black areas only just appear black Contrast Adjust the overall luminance ratio between black and white The contrast setting depends on the brightness of the room The brighter the surroundings the higher the contrast should be set Colour Adjust the colour saturation within the picture Set the intensity to suit your personal taste Sharpness Adjust to achieve the optimum sharpness of edges and details within the picture 16 P Noise Reduction Q Back Light Back Light in 3D mode Back Light Back Ligt 50 Advanced Settings Dynamic Contrast Medium Skin Tone Medium White Balance Motion smoothing Picture Reset EA Picture Reset Noise Reduction Reduce or eliminate the picture noise from connected devices Select between the following off low medium high and auto Advanced Settings Specialized picture settings Adjust the b
6. Setup DHCP Dynamic Host Configuration Protocol Automatically acquires the necessary connection values and connects your TV to the network Static Manually input the connection values needed to connect the TV to the network IP address subnet mask default gateway primary and secondary DNS e Wlan Scan Scan and display a list of available access points Press the A W buttons to select your network name SSID and then press the OK button A screen will appear prompting you to enter your networks password security key Enter the password security key and press the OK button Your TV should now be connected to your network Add Network Manually connect to your network A screen will appear prompting you to enter the name SSID and select the security mode Enter the password security key and press the OK button Your TV should now be connected to your network Auto If you select Auto a screen will appear prompting you to select PIN or PBS Push Button Configuration setup Choose the method supported by your wireless access point PIN A pin number will appear on your screen Enter this pin number into your access point After entering the PIN press the OK button If the PIN is in use by another device select Refresh PIN to obtain a new one PBC If you select PCB a screen will appear prompting you to press the NEXT button After pressing the NEXT button you will hav
7. product in any way Unauthorized modification could void the warranty of this unit cause electric shock and fires E Remote Control batteries Incorrect installation may cause battery leakage corrosion and explosion Replace only with the same or equivalent type Do not mix old and new batteries Do not mix different battery types Dono use rechargeable batteries Do not burn or break up batteries Do not expose batteries to excessive heat Be sure to dispose of batteries correctly E Outdoor Antenna Grounding If an outdoor antenna used be sure the antenna system is protected against voltage surges and built up static charges E Disposal Refer to the recycling section of this manual E Using the 3D function Read the following safety instructions before using the 3D function of your TV WARNING People that have a visual disorder may not be able to perceive 3D effects or may only be able to perceive them to a limited extent Only watch 3D images after consulting your doctor if you have a history of oversensitivity to light flickering images heart problems are pregnant and or any other medical condition such as epilepsy cardiac disorder blood pressure disease etc Do not watch 3D content if you feel nauseous are fatigued from lack of sleep overwork or intoxication 3D content is not recommended for those who suffer from stereo blindness or stereo anomaly Double images or viewing disc
8. short farsighted astigmatism eyesight difference between left and right ensure that you correct you vision before using the 3D glasses The 3D glasses can be worn over vision correction glasses Stop using the 3D glasses immediately if you experience any redness pain or skin irritation around the nose or temples In rare cases the materials used in the 3D glasses may cause an allergic reaction 10 E Notes Use only approved 3D glasses Otherwise you may not be able to view 3D images properly It may take some time for you to get used to the 3D glasses and before you can perceive the 3D effects properly Switch of any artificial light sources between the 3D TV set and the 3D glasses These could interfere with the infrared reception or the TV picture may flicker as a result To prevent interference with other TVs or wireless devices the 3D glasses needs to be paired with the TV Press the power key on the 3D glasses to start pairing when the indicator light flashes the pairing is complete Certain functions like Zoom are not available when watching 3D images This TV automatically identifies 3D formats when connected to a HDMI v1 4 compatible source Other sources require manual setup Watching TV 1 Watching TV After installing the TV you can enjoy watching TV by the following steps E Power on Switch on the power button of the TV Press the power button on the remote control
9. then enter it again to confirm it The PIN will be changed 30 12 Setting Options About TV lt Setup ofa z sxe Picture amp 3D e Sound gg Channel Network oystem a About TV Software Version Upgrade the software to the latest version Software Update can be performed via the network Software Update connection or downloading the latest software to a USB memory device Refer to Software Update Software Version Display the software version information Software Version Restore Factory Restore all settings to the factory defaults Restore Factory Disclaimer Lo When the Disclaimer menu opens press the A F buttons to scroll through the pages Disclaimer Please read it carefully 31 1 Press the O button to display HiSmart portal ilanoise wf a ege be p Q video searen viewster hh fc e SE i SS H A k y A HANGOVERS z D 2 A fat ae Mm Vie Smith ICH 2 Press the A V lt gt buttons to navigate 3 Press the OK button to enter the category or app A Note The TV has to be connected to the Internet to be able to access the portal Illustrations and apps for reference only More detailed and up to date instructions can be found in the internet Germany www hisense de Italy www hisenseitalia it Spain www hisense es Through the HiMedia function this TV can play media files such as videos photos and musi
10. tuning of channels in ATV mode 1 Insert a USB storage device to the USB jack 2 Select the Export To USB mode A pop up menu appears press the OK button to begin to copy the programme list Only DTV channels will be copied 3 If the Figure 1 shows it means that the exporting was successful Figure 1 Clone is successful Figure 2 Clone failed If the figure 2 shows the export was not successful please check the following Check if the USB storage is inserted and working properly This function is only available for DTV channels Li Export To USB Import from USB 1 Insert the USB storage on which you saved the edited channel list to your TV 2 Select the Import from USB mode If the figure Update failed shows the importing was not successful please check the following Check if the USB storage is inserted and working properly This function is only available for DTV channels Import from USB 23 10 Setting Options Network Here you can adjust the setting related to the network configuration and test your connection For explanation of the setting in the Network menu see page x Setup 8 Picture DD d Sound Channel Network m System m About TV 24 Explanation of the network settings Network Setup Yj Setup the network settings for your TV Network Setup e Interface Select the connection type Ethernet or Wlan e Ethernet Network
11. LED Backlight TV USER MANUAL Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time English ES J141512 Contents Contents WV NG ONT ies oir ana AA tees ce secon A N E A AA T E A 3 Important ee A Salely TIS UIC TOMAS scorers eae ees eee ss cenceceneees EEE OEE 5 BR Te e FO EE 11 2 Select Input SOULCE 11cccccccceccencceeennseuneenennsnnseesenesnnseuseeneunseessenenssanens 12 A AO Re EE 12 4 ASPO TAO E 14 5 Menu OPCratiON 1sccccecceseecsccenensnncusensencuscesencuecesenseneusensncuseusenseneesenses 15 D Setting Options Picture cccssccseenneccneecseesnenensennseansesenssennsansenneeaes 16 f SGUN OPUONS SD ME 18 8 Setting Options Sound cctsccssccssenseecesesennecnensnensenssansenecsnessesssenssanes 19 9 Setting Options Channels EE 22 10 Setting Options Network 1cccsssccsseccssenessensnssnsnsesansecsnsecseseasensanensans 24 11 Setting Options SYStCWN ccccssccesccnsccssecssesennscensenssecnessnnseanseansenessseaees 27 12 Setting Options About Ab A EE 31 LAE PAIS AM E 32 14 TIC LC a iair 32 DD MOF g A EA E E A E O ETER 36 TGs Smart TE 36 17 Software Update cccccsccsccsecnsssesenccnnseeseueenesenseneeeesenseneeneessensenseuesensaes 37 18 Troubleshooting E 38 19 EE 42 20 ROC CHING EE 43 Welcome Thank you for purchasing a Hisense TV This device lives up to the highest standards innovati
12. Nethelands UK 43 0820420411 32 0 11 281780 45 44503039 33 0800 835 897 49 0511 51 51 3396 36 614772070 44 28 3832 6119 39 800 321 999 47 815 81 333 34 903027419 46 911 21 14 50 41 0 900782400 31 0 77 3060708 44 0345 6104199 Si gd D 5 D D Q O Oo D Q O 3 www eseco at www servilux be wwwelektronik centrt dk www nse group com www elesco europa com www aagservice hu www craigavon tv www hisenseitalia it www infocare no www hisense es www assistkedjan se www stagicp ch www technorep nl www hisense co uk www hisense com en For more information please contact the service company of Hisense in your country 42 Recycling Licenses 15 Recycling Licenses WEEE Waste Electronic Electric Equipment European Directive 2002 96 EC This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste equipment for recycling please contact your local city
13. acklight to suit lighting conditions of the environment Not available e Adaptive Back light Adjust the backlight mode by selecting manual or adaptive backlight mode Back Light Only available when the Backlight Mode is set to manual Adjust the backlight level bar to select the optimum level of illumination Colour Temperature Adjust the colours independently to achieve the desired warm or cool feeling Select one of the following options Standard Warm Cool and Custom Dynamic Contrast Adjust the colour contrast to achieve the optimal contrast setting Select one of the following options Off Low Medium and High Skin Tone Adjust the amount of red in skin colour tones Select one of the following options Off Low Medium and High White Balance Adjust the white balance by individually adjusting the brightness of the R Gain G Gain and B Gain levels Motion smoothing Eliminate motion blur with clear detail and smooth motion Depends on your TV size and series Reset all picture setting to factory defaults 7 Setting Options 3D Here you can change the setting for the 3D mode of your TV The 3D function is only applicable to the products which support it Setup Ss Picture E gt 3D Sound Channel Network System About TV Explanation of the 3D settings 3D mode O When viewing 2D video this option must be selected 3D Mode L R Swap Since there is n
14. always comply with the following precautions to avoid dangerous situations and damage to your unit The lightning flash with arrowhead symbol O7 NGR ETON within an equilateral triangle is intended to alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK dangerous voltage within the product s DO NOT OPEN enclosure that may be of sufficient magnitude to constitute a risk of electric shock CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR The exclamation point within an equilateral BACK NO USER SERVICEABLE PARTS triangle is intended to alert the user to INSIDE REFER SERVICING TO QUALIFIED the presence of important operating and SERVICE PERSONNEL maintenance servicing instructions in the literature accompanying the appliance The intended use and ambient conditions for this TV This TV is intended for the rendering of video and audio signals on a table top or wall mounted in a home or office environment It must not be used in rooms with a high level of humidity or dust concentration The warranty is only valid if used as intended by the manufacturer A WARNING High humidity and dust concentration may lead to current leaks in the device To reduce the risk of fire or electrical shock Do not expose this unit to rain moisture dripping or splashing water and do not place objects filled with liquids such as vases cups etc on or over the unit Do not touch the TV with wet hands Do not
15. arents or guardians to ensure their safety and health while they are watching 3D images Children perceive more stereoscopic depth compared to adults because the distance between the eyes is shorter Teenagers Teenagers under the age of 19 may be stimulated to light coming from 3D images Advise them not to watch 3D videos for a long time when they are tired Elderly The elderly may perceive less of a 3D effect than the youth Do not sit closer to the TV than the recommended distance E Cautions when using 3D glasses Only use the 3D glasses for the intended purpose and nothing else Do not use 3D glasses instead of your normal glasses sunglasses or protective goggles Do not move around while wearing 3D glasses to avoid falling or accidental injury Be careful of the tips of the frame in relation to your eyes when putting on the 3D glasses Be careful not to trap your fingers in the hinge section of the 3D wear Do not use 3D glasses if they are physically damaged Using modified 3D glasses may cause eye strain or image distortion Do not keep your 3D glasses in extremely high or low temperatures It will cause deformation The 3D glasses are fragile and are easy to scratch Use a soft clean piece of cloth when wiping the lenses Do not scratch the lenses with sharp objects or clean wipe them with chemicals Do not drop exert pressure or step on the 3D glasses If you suffer from eyesight problems
16. ause malfunction Do not use the TV near any automatic control equipment such as automatic doors or fire alarms Radio waves may interfere with automatic control equipment and cause malfunction If you have a cardiac pacemaker keep a distance of at least 22 cm from the TV Radio waves may interfere with the operation of a pacemaker E Built in wireless LAN Do not connect to wireless networks that you do not have the usage rights for Data transmitted and received over radio waves may be intercepted and monitored The built in wireless LAN uses 2 4 GHz and 5 GHz frequency bands To avoid malfunctions or slow response caused by radio wave interference keep the TV away from devices such as other wireless LAN devices microwaves mobile phones and other devices that use 2 4 and 5 GHz signals E Supervision Do not let children play unsupervised close to the TV It could tip over be pushed off or pulled down from the stand surface and injure someone Do not allow a switched on TV to run unattended E Volume Loud music and noises can lead to irreversible damage to your ears Avoid extreme volume especially over long periods and when using headphones If you hear a drumming noise in your ears turn down the volume or temporarily stop using headphones E Thunder Storms Pull out the power plug and all connected antenna cables from the TV during a thunderstorm Overvoltage caused by lightning strikes
17. can damage the TV via the antenna system as well as the wall socket E Long periods of absence As long as the power plug is connected to a live socket outlet the TV will consume power even in OFF mode The power plug and all connected antenna cables should be disconnected out during long periods of absence E Cleaning and care CAUTION Unplug the power cord prior to cleaning the TV Clean the TV the screen and the remote control with a soft moist clean and color natural cloth only Do not use any chemicals Do not subject the surfaces to insect repellent solvent thinner or other volatile substances This may degrade the surface quality Do not spray water or other liquids directly on the TV Liquid inside the TV could lead to product failure The surface of the display panel is treated and may be easily damaged Take care not to scratch it with fingernails or other hard objects Also wipe the power plug with a dry cloth at regular intervals E Service Repair Never remove the cover back of the TV there are no user serviceable parts inside Refer all service to qualified service personnel E Packaging Keep the anti moisture materials and plastic bags out of reach of children Plastic bags can cause suffocation and the anti moisture material is harmful if swallowed If swallowed by mistake force the patient to vomit and visit the nearest hospital E Modification Do not attempt to modify this
18. cs from a USB storage device To start the HiMedia function press the GH button on your remote control ve A T amp Youtube Movies Home App Store Or when you insert the USB disk mobile hard disk with standard USB2 0 port in TV source select the YES 32 Navigation lt Press to switch to the left side menu bar A V Select media All Photo Video Music gt Press to switch to the right side menu Select USB source and press OK lt gt AV Navigate the folders files and press the OK to enter the folder play the file Be HiMedia E Supported media formats Meda Supported format MPEG1 dat MPEG2 mpg MPEG4 mpg H 264 A Note It cannot be guaranteed that a supported file will open since the encoding tools are different E Browsing Photo 1 Press the lt button to switch to the left hand side menu bar Select All or Photo by pressing the two way directional A V button on the remote 2 Press gt button on the remote control to select the USB source and then Press the OK button to enter 3 Press the A V lt gt buttons to select the folder that contains the photo you want to view 4 Press the OK button to display photo When browsing the photo Press the lt gt buttons to select the function icon and then press the OK button to con firm 33 1 Play pause 2 Browse the previous photo 3 Browse the next photo 4 5 Rotate R
19. deal picture and sound but with higher power consumption Shop Mode optimizes picture for store environments Resets all settings when the TV is turned off This feature allows you to add devices to your TV and control them with your Time Zone When you select a Time Zone city the TV time is set based on the Time Zone information and GMT Greenwich Mean Time which is received with the broadcast signal and the time is set automatically Auto Synchronization Date and time can be adjusted manually when it is set to off Select on to synchronize with the digital signal Only available for DTV channels Date Set the current month day year Time Set the current time 29 Power On Timer Set the TV to automatically switch on at a preset time On Off Select On to activate the function Repeat Set repeat cycle Time Set the desired time for when the TV should turn on Power Off Timer Set the TV to automatically switch off at a preset time On Off Select On to activate the function Repeat Set repeat cycle Time Set the desired time for when the TV should turn off Sleep Timer The sleep timer automatically puts the TV into standby mode after the preset time has elapsed Specify the amount of time before the TV sleeps Off 10 120 minutes If you turn off the TV after setting the sleep timer the setting will be erased Auto Sleep If you do not
20. e 120 seconds to press the Push Button on your access point to connect your TV 25 IP setting Set the IP address subnet mask gateway primary and secondary DNS when connected to Wlan anyview cast If your phone PAD with Mircocas function can be achieved wireless connection mm W e with the TV Anyview Cast How to use anyview cast Your TV should be connected to your network by Wlan Enter to AnyView Cast on screen Setup gt Network gt AnyView Cast Set the Mircocas function on your phone or PAD is available Share your phone or PAD s display Network Status View the current network and internet status Q Network Status Connection Test Anyview Stream Connection Test Test your network and internet connection Anyview Stream The TV can directly browse and play media files such as the videos pictures and musics from computers or other mobile devices over the same home network How to enter anyview stream Select AnyView Stream Setup gt Network gt AnyView Stream On the AnyView Stream screen to set it on My Share Device Allow or deny mobile devices to access your TV ei My Share Device 26 11 Setting Options System Here you can adjust the settings related to the system language start the first time installation guide again choose the use mode time setup security recording software update restore factory
21. e disclaim any liability or damage that may arise from operation and or performance from usage of such other maker s peripheral devices The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights of the content you wish to record or playback The Index Glossary explains certain terms used in this user manual and in the TV menu Declaration of Conformity DoC This TV is CE marked and complies with EU directives The complete declaration of conformity is included in this manual and can also be downloaded from the Hisense homepage Hisense declares that this TV is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EG It may be operated in all countries in the EU and also Iceland Norway and Switzerland In France and Italy it may only be used indoors Read these instructions Follow all instructions Heed all warnings Keep these instructions Hisense Europe Europe road 1234 4321 Europe www hisense com All rights reserved I Safety Instructions Safety Instructions To ensure safe and correct use of this product
22. e quality Try to improve the picture by changing the antenna direction or place devices away from the TV When the picture is distorted Image may be abnormal when the TV system is changed as a result of or poor the manual search If so please check whether TV system is correct or not If only a certain channel is poor try to fine tune this channel in the Fine tune menu There is no sound or the sound is too low at Please check the volume of the external device connected to your TV maximum volume 38 The picture is good but there is no sound The speakers are making an inappropriate noise If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV If you are using DVI or VGA cable a separate audio cable is required If your TV has a headphone jack make sure there is nothing plugged into it Check the cable connections Make sure a video cable is not connected to an audio input For antenna or cable connections check the signal strength Low signal level may cause sound distortion The TV will not turn on The TV turns off automatically There is no picture video Make sure the AC power cord is securely plugged in to the wall outlet and the TV
23. ent of the stand Ensure that children do not climb onto the stand Attach or remove the stand with at least two people Install the TV following the specific procedure in the Quick Setup Guide 10cm 10cm Prevent small items from getting into the interior of the device through the ventilation slots Such objects may cause short circuits which may cause fire If something should get inside the unit immediately unplug the power plug of the device and contact service support E The LCD screen Despite thorough care when manufacturing this display it cannot be 100 guaranteed that no sub pixel defects will occur due to technical reasons These cannot be considered as a device defect in terms of the guarantee They will not affect the performance and reliability of the TV To prevent image burn avoid displaying still images for long periods of time there is a possibility that a copy of the image may remain If the aspect ratio is set to 4 3 for a long period of time image burn may occur on the black areas Image burn is not covered by the warranty Do not apply strong force or impact on the display panel Avoid touching the LCD screen or touching it for long periods of time Doing so may produce some temporary distortion effects on the screen E Radio waves Do not use the TV in any medical institutions or locations with medical equipment Radio waves may interfere with medical equipment and c
24. expose to direct air conditioning and keep candles or other naked flames away from the TV at all times If the TV is moved from a cold environment to a hot environment leave it switched of for at least an hour to avoid condensation If used outside make sure it is protected from moisture If you notice anything unusual immediately turn off the main power supply switch and remove the power plug In case of fire use preferably a CO2 gas or powder fire extinguisher If such extinguishers are not accessible try to isolate the electrical supply before using a water fire extinguisher E Moving Transportation Before moving this TV disconnect all cables and move in the vertical position only Grasp the device on the upper and lower edges of the frame Do not press or put stress on the front panel of the TV It may take two or more people to carry larger TVs If you have to briefly lay down the TV place the unit with its entire front surface lying flat on soft material The LCD screen is made of glass and can break if is not handled properly Always wear rubber gloves to carry the unit If the LCD screen is damaged liquid crystal might leak out In case of skin contact immediately rinse thoroughly with water E Power Supply Incorrect voltages can damage the TV Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate using the supplied power cable The power plug mus
25. f this manual Make sure that you are using a digital signal Choose DTV from the The TV image does not SOURCE list or use a digital set top box look as good as it did in the Check if the channels you are watching are also available in HD store Make sure you are sitting a minimum of three times the diagonal of the TV away Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies Low signal level or bad quality can cause picture distortion This is not a TV issue Mobile phones used close to the TV less than 1m may cause noise in picture on analogue and digital TV The picture is distorted macroblock error small block dots pixelization If you re using a component connection make sure the component Colour is wrong or missing cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen There is poor colour or Adjust the PICTURE Brightness Sharpness Backlight mode in the TV brightness menu Press the SIZE button on the TV remote to change the picture zoom to 16 9 Adjust the picture screen display in the TV menu Press the MENU button and select SCREEN mode Change the set top box resolution There is a dotted line on the edge of the screen Verify if the antenna is connected properly Non earthed audio devices neon lights high buildings or mountains can influence the pictur
26. ion keys are provided to control the connected TV e Mouse Mouse functionality can be activated by tapping on the Mouse key on the remote control e Keyboard Soft keyboard can be used to input text to TV Only some types of applications support text input from smart devices A Note It s possible you have to change settings on your device to install software not downloaded from Play Store TV and the smartphone tablet have to be connected to the same network Please start the Smart Remote app and select your TV from the list then select TV remote 36 17 Software Update Software Update can be performed by network connection or downloading the latest software to a USB memory device E By USB Insert a USB drive containing the software update file downloaded from 39 Di 39 Di Germany www hisense de Italy www hisenseitalia it Spain www hisense es Please be careful not to disconnect the power or remove the USB drive until updates are complete The TV will be turned off and on automatically after completing the software update When software is updated video and audio settings you made will return to their default settings and your personal set tings will be deleted We advise you to write down your settings so that you can easily reset them after the update mE By Network Update the software using the Internet First configure your network For detailed procedures on using the Networ
27. k Setup refer to the Quick Setup Guide and Setup gt About TV instructions If you want the Network Update to work automatically please set Auto Upgrade to On Setup gt About TV gt Software Update gt Auto Upgrade If the Internet connection doesn t operate properly check the Network Configuration settings and try again If the problem persists use the USB method above to update OAD over air download Enables you to install the latest version of the software if available Select OAD and press OK P to enter e Use lt gt to select Yes under Auto download to automatically download the latest software if available After the software has been downloaded successfully you will be prompted to decide if you want to install it right now If yes follow the hints on the screen to complete your installation You can also select to ignore the installation here e Select No under Auto download to decline the automatic download e Select Manual OAD download and press OK to start manual scanning the latest software Follow the hints on the screen to complete Duringthe scan press OK Exit to cancel or exit the process 37 Troubleshooting 18 Troubleshooting If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit Germany www hisense de Italy www hisenseitalia it Spain www hisense es Then click on Support or contact the call centre listed o
28. n to confirm and the video will play at the time you have set 8 Play list Press the CH CH buttons to page up page down and press the A F buttons to select the video Press the OK button to confirm 9 Options Press the A F buttons to select the options and press the OK button to enter then press the A buttons to set them and press the OK button to confirm Repeat You can change the repeat mode All Repeats all files contained in the folder Once Plays the current file once Single Repeats the current file only 3 D Zoom You can choose the Full Screen Original Size or Normal mode Subtitle If the video has multiple subtitles you can choose what you want Audio Track If the video has multiple audio tracks you can choose one of them 10 Program info Allows you to view the program information E Playing Music Files 1 Press the lt button to switch to the left hand side menu bar Select All or Music by pressing the two way directional A V button on the remote Press gt button on the remote control to select the USB source and then Press the OK button to enter Press the A V lt gt buttons to select the folder that contains the music file you want to listen Press the OK button to play Pause the music All the music is listed on the left Press the A V buttons to select the music and press the gt mark button to mark it You can pres
29. o standard signal formatting Mismatch incorrect stereoscopic impressions and dizziness may occur when watching some 3D videos This can be solved by switching on this function For modulation see the related content in this manual Not available when 3D mode is 3D to 3D View Ponit Adjust the out of screen effect that the 3D images have Only available when 3D mode is 2D to 3D View Point Depth Increase or decrease the stereoscopic effect Not available when 3D mode is off 3D to 2D AIl 3D video will be converted into 2D video You will not have to wear 3D glasses to view it properly Enables playing of 3D movies and TV shows by using the compatible 3D glasses Please refer to the 3D section for more information The 3D function is only applicable to the products which support it 18 8 Setting Options Sound Here you can adjust the settings related to the sound output on your TV For explanation of the setting in the Audio menu see page CX Setup 8 Picture gt 3D s Sound Channel Network System W About TV Explanation of the Sound settings Xb Sound Mode Sound mode Select the Sound Mode based on your personal preference Standard Music Theater Speech or Custom Speaker Settings Yo Speaker Settings e Balance Adjust the relative volume between the left and right speakers Speaker Settings em gt Auto Volume OFF S
30. office your household waste disposal service or the shop where you purchased the product Batteries In accordance with the Battery Directive used batteries should not be disposed of in the domestic waste Dispose your batteries in the collection containers specific for this purpose in retail stores RoHS Restriction of Hazardous Substances European Directive 2002 95 EC This product complies with the RoHS directive which limits the use of dangerous and hazardous substances which are difficult to recycle eae DET ay This TV incorporates High Definition Multimedia Interface HDMI technology pee RR MERN ERI nUGEnA HDMI the HDMI logo and High Definition Multimedia Interface are trademarks and registered trademarks of HDMI licensing LLC in the United States and other countries 43 45 46
31. omfort may be experienced If you are cross eyed weak sighted or have astigmatism you may have trouble sensing depth and easily feel fatigue due to double images It is advised to take more frequent breaks than the average adult If you experience any of these symptoms stop using watching 3D video immediately and get enough rest until the symptoms subsides headache eyeball pain dizziness nausea palpitation blurriness discomfort double image visual inconvenience or fatigue Consult your doctor if the symptoms persist CAUTION Viewing Distance Maintain a distance of at least twice the screens diagonal length when watching 3D content If you feel discomfort in viewing 3D content move further away from the TV Have longer pauses when watching 3D images then regular movies Failure to do so can result in headaches fatigue dizziness eye strain or discomfort Position yourself comfortably in front of the TV and ensure that you are seated firmly When viewing 3D images your sense of distance may be fooled or go wrong Be careful not to hit the TV screen or other people unintentionally Ensure there are no breakable objects around you to avoid any accidental damage or injury Infants Children Children under the age of 5 should not view 3D images as a guideline Children under the age of 10 may overreact and become overly excited because their vision is in development All children must be fully supervised by p
32. on to select the input that your player is connected to 3D supported broadcast Consult your contents supplier for the availability of this option 3D photos and 3D videos 2D images converted to 3D Basic Settings Select 3D Mode To change the setting for the 3D mode of your TV press the button on your remote Settings Press the A V to select 3D 30 gt and then gt press OK to confirm 3D Mode EECH Ly KR on A Note When the 3D signal is Frame Packing the image will be displayed according to the resolution of the incoming signal A 1280 x 720 input will be displayed in 720p a 1920 x 1080 input will be displayed in 1080p When the 3D signal format is Side by Side Top and bottom the image is displayed full screen in half resolution 960 x 1080 or 1920 x 540 Select a preset 3D mode When viewing 2D video this option must be selected Select 3D mode automatically Convert all ordinary 2D video to 3D video You need to wear your 3D glasses to view this properly Display two images next to each other Display two images one on top of the other Display the images for the left and right eye alternately 13 4 Aspect ratio There are two input signals one is 4 3 and the other is 16 9 The recommended format for 4 3 is 4 3 or Auto and for 16 9 it is 16 9 or Auto You can set various display modes which are shown as follows Settings ZE Source HDMI 1 gt
33. order of the picture will be cropped This selection is similar to 16 9 mode This selection will allow you to zoom in the picture without any alteration while filling the entire screen However the border of the picture will be cropped This selection is similar to 16 9 mode but the picture slightly but the picture slightly stretches horizontally stretches horizontally side and clips off a side and clips off a little from the top and little from the top and bottom This selection will display the picture according to the aspect ratio of the input source bottom This selection will display the picture according to the aspect ratio of the input source This selection will detect the resolution of the signal and display an image with the same number of pixels The signal is optional in some source eg the HDMI source 5 Menu operation Settings 8 Source HDMI 1 gt gt More Settings gt You can enter the settings menu by pressing the xt button on your remote control Press the A V to select More Settings More Settings DW and then press OK to confirm The arrow keys in the middle of your remote control help you navigate in the menus and select menu items The OK button in the middle is used to confirm a selection Press the button on your remote to return to the previous menu 15 More Settings 6 Setting
34. otate the photo 90 degrees clockwise Rotate the photo 90 degrees anticlockwise This function is not available for dynamic photo 6 Enlarge Zoom in the photo 7 Shrink Zoom out the photo 8 Option Set e Press the A F buttons to select the options and press the OK button to enter then press the A buttons to set them and press the OK button to confirm e Speed Allows you to browse the photo at different speed e Effect Select transition effects between images 9 Photo info Displays information about the photos mE Playing Video Files 1 Press the lt button to switch to the left hand side menu bar Select All or Video by pressing the two way directional A V button on the remote 2 Press gt button on the remote control to select the USB source and then Press the OK button to enter 3 Press the A V lt gt buttons to select the folder that contains the video you want to view 4 Press the OK button to play the video 5 Press the lt gt buttons to select the function icon and then press the OK button to confirm 00 03 36 Function of icons 1 The progress bar when playing 2 Play Pause 3 Play the previous video 34 4 Play the next video 5 Fast rewind 6 Fast forward 7 Select time to play Press the lt gt buttons to set hour minutes and seconds Press the 0 9 buttons to set the time and press the A W lt buttons to adjust it Press the OK butto
35. over the edge of the base when placed in or on furniture If placed on a cart use caution when moving to avoid the unit from tipping over Place the unit in a normal upright horizontal position It must never be operated vertically lying flat or hanging overhead from the ceiling Place the unit where it is not exposed to direct sunlight or other sources of heat When mounting the TV on a wall follow the instructions supplied with the wall mount make sure not to install the TV by hanging the power and signal cables on the back of the TV E Air ventilation and high temperatures Install your TV only where there is proper ventilation and ensure that there is at least 10 cm free space on the sides and 20 cm above the unit for air circulation Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric components Do not block any ventilation openings with newspapers tablecloths curtains etc Do not dry clothing etc on top of the unit Take care not to touch the ventilation Openings since they may become hot Do not insert foreign objects into the TV through the vents E The Stand Do not use any stand other than the one supplied with this unit Do not modify or use the stand if it becomes warped of physically damaged During setup make sure that all the screws are securely tightened Ensure that the TV does not suffer any impact during the attachm
36. p 3D gt More Settings gt This selection will allow you to view a picture with an original 4 3 aspect ratio Black bars will appear on both the left and right of the screen This selection will allow you to adjust the picture horizontally in linear proportion to fill the entire screen This selection will allow you to zoom in the picture without any alteration However the top and bottom of the picture will be cropped And it allow you to adjust the picture horizontally in linear proportion Black bars will appear on both the left and right of the screen To switch between 4 3 16 9 Zoom 1 Zoom 2 Smart Zoom Auto 1 1 press the button on your remote Press the A V to select Zoom E Zoom gt and then press OK to confirm This selection will allow you to O adjust the picture horizontally in linear proportion Black bars will appear on both the left and right of the screen This selection will allow you to view a picture with an original 16 9 aspect ratio This selection will allow you to zoom in the picture without any alteration However the top and bottom of the picture will be cropped And it allow you to adjust the picture horizontally in linear proportion Black bars will appear on both the left and right of the screen 14 This selection will allow you to zoom in the picture without any alteration while filling the entire screen However the b
37. peaker amp ARC Speaker Auto Volume Enable this setting to automatically adjust the volume to reach a consistent level e Speaker amp ARC e ARC Connect to an external digital audio receiver through a HDMI cable and set this to On to activate ARC 19 SPDIF Settings D SPDIF Settings e SPDIF Output Select the digital output format SPDIF Delay 0 PCM Outputs two channel audio regardless of the input format SPDIF Settings RAW If the audio stream carries a Dolby signal that will be outputted If the audio stream carries no Dolby signal PCM will be outputted e SPDIF Delay Correct audio video synchronization problems when watching TV video and when listening to digital audio using an external device such as an AV receiver Sound Effect Adjust the sound with a 5 band equalizer Press the A F to select the different audio frequency bands 120 Hz 500 Hz Sound Effect 5 KHz and 10 KHz Press lt gt to adjust each frequency and individually Audio Type Normal Hearing Impaired Visually Impaired Audio Type e Hearing Impaired Increases the overall intensity of high frequency sounds for a better listening experience Only available for DTV channels and if the service is broadcasted e Visually Impaired Provides an additional description audio track for visually challenged people Only available if sent along with the main audio from the broadcaster
38. press any button on the remote control during the set period the TV can switch into standby mode to save energy Record amp T shift D Record amp T shift Record amp T shift e Recording List Display recording program list Booking Schedule e Booking Schedule Recording Setting Display reminder and recording information Time Shift Setting e Recording Setting Select the device or disk where you want to store your contents recorded e Time Shift Setting Select the device or disk where you want to store your timeshift contents Security Prevent unauthorized users such as children from watching unsuitable programs When you first use this function the default password is 0000 You can change the password in the Change PIN submenu Security Security e Blocking Channels Channel Lock is designed to prevent children from watching unsuitable programs Press the A F buttons to select the channels you want to lock and then press OK to confirm A lock icon will appear on the right of the channel Not available in HDMI or Component mode Youth Protection This function allows you to set up blocking schemes to block programs and channels with age ratings It operates according to the information from the broadcasting channel Therefore if the signal is incorrect or has no information on age rating it will not block the program or channel e Change PIN Enter a new password and
39. rectly at the TV from 5 6 feet away Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual This smell is normal and will dissipate over time Remove the stand base from the TV and reassemble it Make sure the TV is placed on a flat surface It is necessary to use magnetized screw driver if you cannot remove the screws from the TV The Channel menu is only available when the TV source is DTV or ATV If the TV is in the Shop Mode your settings will not be saved You should select the Home Mode Installation Guide has to be On and the TV has to be switched off and back on to start the Installation Guide Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use Check and change the signal source To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture A Note This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product 41 Service contact 19 Service contact Austria Belgium Denmark France Germany Hungary Ireland Italy Norway Spain Sweden Switzerland The
40. s the Page up down buttons to move page up down Press the Mode button to select the Repeat Mode Mark All Single gt Mark Mode Play Pause Page up douwn 15 HbbTV Startleiste einblenden WD Re You will be able to access additional services of broadcasters and channels through HbbTV HbbTV services are not offered in all countries and not by all channels 1 Tune to the channel of which you would like to access the HbbTV services 2 Press the RED button to enter the service A Note The function is only applicable depending on the model HbbTV is not available when Timeshift is running or when a recorded video is being played back Parts of the services are only available if the TV is connected to the Internet If a channel is offering HbbTV services is indicated when you are tuning to the channel by a pop up win dow with further instructions or in the info bar with HbbTV 16 Smart Remote You can download the Hisense Remote Control app to your Android smartphone tablet to use it as a remote control for your TV E Operation introduction 1 TV side e Confirm the TV is connected to a local network e Set Smart Remote to On Settings Menu gt More Settings gt System gt Smart Remote gt on 2 Device Setup e Download the corresponding application from Google play store Device Type Application Name Android Smartphone Tablet TV Remote 3 Hisense Remote function e Keys Funct
41. settings and other system settings For explanation of the setting in the System menu see page lt Setup Picture 3D Sound Channel GG Network mm System BE About TV Explanation of the system settings Language Language Menu Language Language Select a language for the menu Primary Audio Select the primary audio language only in DTV mode Secondary Audio Digital Teletext Language English Select the secondary audio language only in DTV mode Primary Subtitle Select the primary subtitle language or turn of subtitles Secondary Subtitle Select the secondary subtitle language or turn of subtitles Digital Teletext Language Select your desired Teletext language Decoding Page Language The Teletext channel will display incorrectly if you select the incorrect decoding Smart Remote You can use your Android Smartphone or tablet as a remote control for your TV by downloading an application Smart Remote Menu Timeout Installation Guide Co Use Mode Use Mode Use Mode Shop Mode CEC TV remote control CEC Time Setup Time Setup Installation Guide Enter the First Time Installation Guide Select the time it takes before the On Screen Menu disappears 10s 20s 60s Select your mode settings Home Mode Premium Mode and Shop Mode Home Mode Recommended for home use and low power consumption Premium Mode i
42. shift Mode does not work If the signal is weak or does not exist the Timeshift Mode function will automatically be closed Timeshift Mode can t be performed if the USB device has no free memory space Check that this is not the case The picture will not display in full screen The remote control does not work A Not Supported message appears There is a plastic smell from the TV TV is tilted to the right or left side front or back side There are difficulties assembling the stand base The Channel menu can not be selected Your settings are lost after every time the TV is turned off You have intermittent loss of audio or video There are recurrent picture sound issues A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture Channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or press the SIZE button to 16 9 that will display the whole screen Replace the remote control batteries with the poles in the right direction Clean the transmission window located on the top of the remote control Pairing the Remote Control with TV Not for TV models which use infrared remote control Try pointing the remote di
43. t Supported Set your PC s output resolution so it matches the resolutions supported message appears by the TV The video is OK but there is If you are using a VGA or DVI connection check the audio output setting no audio on your PC Go to the Network Configuration and select a wireless network to Wireless network connection connect Enter the password if necessary and try again failed Make sure the wireless router supports DHCP and that it is activated See the manual for the USB device to check that the USB device supports recording The USB device is not If the USB device has a lock ensure it is off recognized or a Device Format Checking Device Check that the USB device can be formatted when connected to the PC or device Performance Test Connect the USB to the TV and format it falls If a Device Performance Test or formatting failed it means that there is a problem with USB hardware or the performance of the USB hardware is too low Check that a USB device is connected Check that the channel is a recordable digital channel The recording function does If the signal is weak or does not exist the recording function will not work automatically be closed The TV will not record if the USB device has no free memory space Check that this is not the case Check that a USB device is connected Radio channels and analogue broadcasts are not supported Data broadcast channels are not supported Time
44. t be easily accessible so that the device can be disconnected at all time The unit is live even if the I O button is switched off as long as the unit is connected to a power outlet It is recommended that this unit is placed on a dedicated circuit Do not overload the power outlets by connect too many appliances to the same outlet Overloaded wall outlets extension cords etc are dangerous and can result in electric shock and fire After power off don t turn it on again in 5 seconds Frequent switching power supply in a short period of time can cause abnormal TV E Power plug and power cable Do not touch the power plug with wet hands Do not place heavy objects on the power cable Route the cable so that it is not kinked or laid over sharp edges walked on or exposed to chemicals A power cable with damaged insulation can cause electric shock and fire Pull the power plug NOT on the cable when disconnecting The cable can become damaged and cause a short circuit if pulled on Do not place the power cable near a high temperature object Do not move the TV with the power cable plugged into a socket Do not use a damaged or loose power cable or a damaged socket outlet Do not use any power cords other then the one supplied with this unit E Set up Check that the location is suitable to bear the load of the TV Place on a level sturdy and horizontal base Ensure that the unit does not hang
45. ve technology and high user comfort Digital Tuner Using apps chatting surfing and enjoying videos have never been this easy With this Hisense TV you can do it fast and simple while lying on your couch Media player access your music pictures and videos from your network or USB storage media and play them directly on your TV Connect a USB storage media to your TV and use the PVR function to record your favorite shows and movies With the Timeshift function you can watch a live broadcast while recording it enabling you to pause the viewing at any time skip commercials and replay important scenes Everything works with one remote control now Connect your TV directly to your terrestrial satellite antenna or cable and enjoy contents in high quality without loss Important Notice Important Notice This guide only contains detailed information about the menus and the explanation of different settings how to use the functions of this TV etc For detailed instructions on how to install this TV please refer to the quick setup guide Paragraphs beginning with the symbol A indicate important instructions tips or conditions for the following settings For your own safety and the optimal performance of your TV ensure to read the safety instructions before performing any installation Hisense does not guarantee operation and performance of peripheral devices made by other manufacturers W
Download Pdf Manuals
Related Search