Home

User Manual - Tangent Wave

1. BK Bank knobs The first 2 knobs are assigned as Still Transition and Still Angle in all rooms Standard is low sensitivity ALTernative is high sensitivity Function buttons These have been mapped the same for each room F1 Std Next Knob Bank Alt Previous Knob Bank F2 Std Alt F3 Std Alt F4 Std Paste Bank 1 Alt Copy Bank 1 F5 Std Paste Bank 2 Alt Copy Bank 2 F6 Std Paste Bank 3 Alt Copy Bank 3 F7 Std Paste Bank 4 Alt Copy Bank 4 F8 Std Paste Bank 5 Alt Copy Bank 5 F9 Std Alt TS Buttons These have been mapped the same for each room Do Std Save Grade Alt Undo Std Undo Alt Redo Std__ Copy Grade From Previous Clip Alt Cue Std Cue Alt Prev Std Previous Grade Alt Next Std Next Grade Alt Mark Std Store Still Alt In Std Player Marker In Alt Out Std Player Marker Out Alt Mem Std Toggle Still Store Alt 59 Tangent Color Support Package User Manual v3 8 Rev 2 Grade Std Toggle Grade Alt Delete Std Reset Grade Alt ALT button This has been mapped the same for each room ALT Std Select ALTernative Function Alt Select ALTernative Function Keypad buttons These have been mapped the same for each room 0to9 Std These all relate to Cue Cue In Color you can cue to a particular shot edit Mode clip or to a timecode The Mode controls this
2. Do Std Save Grade Alt Undo Std Undo Alt Redo Std Copy Grade From Previous Clip Alt Cue Std Cue Alt Prev Std Previous Grade Alt Next Std Next Grade Alt Mark Std Store Still Alt In Std Player Marker In Alt Out Std Player Marker Out Alt Mem Std Toggle Still Store Alt Grade Std Toggle Grade 55 Tangent Color Support Package User Manual v3 8 Rev 2 Alt Delete Std Reset Grade Alt ALT button This has been mapped the same for each room ALT Std Select ALTernative Function Alt Select ALTernative Function Keypad buttons These have been mapped the same for each room 0to9 Std These all relate to Cue Cue In Color you can cue to a particular shot edit Mode clip or to a timecode The Mode controls this Clear When you start typing a number the TS display will indicate the shot or timecode number you are typing in Pressing Cue will move the timeline to that postion Clear will clear the numbers you have typed in Alt More button More Std Next Button Bank Alt Next Button Bank Bank buttons Bank 1 Std Selects Room Alt Room resets and select room tabs basic advanced etc Bank 2 Std Room specific actions Alt Transport Buttons These have been mapped the same for each room Std Previous clip edit
3. 7 4 7 5 7 6 Ring In the Primary In Secondaries and Primary Out rooms in Color the rings control the colour masters lift gamma gain Lift is the left dial gamma is the middle and gain is the right just as they are in Color To move the ring place a finger anywhere on the ring the ring around the red area and move the finger in the direction required You can flick the control to make the ring spin Trackerball reset This resets the colour differential value in Color that the trackerball below it is controlling Press on the icon to reset the control Ring reset This resets the master value in Color that the ring below it is controlling Press on the icon to reset the control Color connection indicator Tells you the state of connection to Color This will flash red if no connection can be made to Color Make sure that you have installed and selected the Tangent Color Plugin Make sure that your Mac running Color and your iPad are both on the same wireless network Make sure that there is only one iPad running vWave Lite connected to the wireless network Green indicates that a connection to Color has been made Sensitivity controls Click on this icon to open the sensitivity controls You can set the sensitivity of the trackerballs and rings in here 17 Tangent Color Support Package User Manual v3 8 Rev 2 8 Quick tour of the Wave panel Take a look at the diagram of the Wave panel b
4. Alt Previous frame Std Next clip edit Alt Next frame Std Play revese Alt Std__ Play forward Alt Std Stop playback Alt 56 Tangent Color Support Package User Manual v3 8 Rev 2 18 4 Default CP200 BK TS K BK Bank knobs The first 2 knobs are assigned as Still Transition and Still Angle in all rooms Standard is low sensitivity ALTernative is high sensitivity Function buttons These have been mapped the same for each room F1 Std Next Knob Bank Alt Previous Knob Bank F2 Std Alt F3 Std Alt F4 Std Paste Bank 1 Alt Copy Bank 1 F5 Std Paste Bank 2 Alt Copy Bank 2 F6 Std Paste Bank 3 Alt Copy Bank 3 F7 Std Paste Bank 4 Alt Copy Bank 4 F8 Std Paste Bank 5 Alt Copy Bank 5 F9 Std Alt TS Labelled buttons These have been mapped the same for each room Do Std Save Grade Alt Undo Std Undo Alt Redo Std Copy Grade From Previous Clip Alt Cue Std Cue Alt Prev Std Previous Grade Alt Next Std Next Grade Alt Mark Std Store Still Alt In Std Player Marker In Alt Out Std Player Marker Out Alt Mem Std Toggle Still Store Alt Grade Std Toggle Grade 57 Tangent Color Support Package User Manual v3 8 Rev 2 Alt Delete Std Reset Grade Alt ALT button
5. Clear When you start typing a number the TS display will indicate the shot or timecode number you are typing in Pressing Cue will move the timeline to that postion Clear will clear the numbers you have typed in Alt More button More Std Next Button Bank Alt Next Button Bank Bank buttons Bank 1 Std Selects Room Alt Room resets and select room tabs basic advanced etc Bank 2 Std Room specific actions Alt Transport Buttons These have been mapped the same for each room Q Std Previous clip edit Alt Previous frame Std Next clip edit Alt Next frame Std_ Play revese Alt Q Std Play forward Alt Std Stop playback Alt All the room specific parameters are mapped to the knobs Standard is low sensitivity ALTernative is high sensitivity 60 Tangent Color Support Package User Manual v3 8 Rev 2 All the room specific actions are mapped to the buttons Row 1 will always show the Paste Bank actions with the ALTernative of these being Copy Bank More buttons These have been mapped the same for each room More Std Next Button Bank Alt Next Button Bank 61
6. Panel ID 1121 IP Adoress 10 10 10 23 10 10 10 24 LU Usa DHCP requires a panel reboot if changed yr Cancel Save Preterences Active Fanel Set CP200 Map Selection Global Settings Panel Settings CP200 TS Panel in use Parel ID 5678 Pan T734 IP Address IP Adcress Click on the Panel In Use tick box ER POTEZE for each panel type you have E mk i Panel In Use A Panel In Use Panel 13 9101 IP Addiess Perel ID 1121 IP Aduress 10 10 10 23 1 10 10 24 O Use DHCP iraquires a panel reboot if changed Cancel Save 11 Tangent Color Support Package User Manual v3 8 Rev 2 Preterences Active Fanel Set CP206 For each of the panels that are In Map Selection Global Settings Panel Settings CP200 TS w Panel In Use Use enter the Panel ID This is the Perel ID 5678 number that comes up on the panel paar display when you first plug it in za op n0 Kk CP 00 S Note each panel ID must be F Panel In Use S Panel In Use different and match the one on Eoia 9101 Perel ID 1121 ddiess duress the panel ees ahr O Us DHCP iraquires a panel reboot if changed Cancel Save For each of the panels that are In Preterences Active Fanel Set CP200 Map Selection Global Settings Panel Settings ji P200 BK CP200 TS Panel in use Panel in Use Use enter an IP Address Paneta 1233 Paral ID s678 IP
7. This has been mapped the same for each room ALT Std Select ALTernative Function Alt Select ALTernative Function Keypad buttons These have been mapped the same for each room 0to9 Std These all relate to Cue Cue In Color you can cue to a particular shot edit Mode clip or to a timecode The Mode controls this Clear When you start typing a number the TS display will indicate the shot or timecode number you are typing in Pressing Cue will move the timeline to that postion Clear will clear the numbers you have typed in Alt More button This has been mapped the same for each room More Std Next Button Bank Alt Next Button Bank Bank buttons Bank 1 Std Selects Room Alt Room resets and select room tabs basic advanced etc Bank 2 Std Room specific actions Alt Transport Buttons These have been mapped the same for each room Q Std Previous clip edit Alt Previous frame Std Next clip edit Alt Next frame Std_ Play revese Alt Std Play forward Alt a Std Stop playback Alt All the room specific parameters are mapped to the knobs Standard is low sensitivity ALTernative is high sensitivity 58 Tangent Color Support Package User Manual v3 8 Rev 2 18 5 Default CP200 BK TS K S
8. Zoom In Zooms the timeline in This is the same as doing a command on the keyboard Zoom Out Zooms the timeline out This is the same as doing a command on the keyboard Fit Fits the timeline to the window This is the same as doing a shift Z on the keyboard 49 Tangent Color Support Package User Manual v3 8 Rev 2 16 Importing and exporting maps You can swap map files between Color systems using the Import and Export functions of the Panel Control Mapper 16 1 Import Run the Panel Control Mapper Go to the File Management menu This will open the Control Map File Management window Click on Import this will open a file browser Navigate to the map file you want to import and click on it Click Import When you ve done this click on Done in the Control Map File Management window You can now go to the Map Selection in the Panel Control Mapper Preferences menu to select this map to use as your layout for the panels 16 2 Export Run the Panel Control Mapper Go to the File Management menu This will open the Control Map File Management window Click on the map you wish to export to highlight it Click on Import this will open a file browser Navigate to where you want to save the map file too Click Export When you ve done this click on Done in the Control Map File Management window 17 vWave Lite wireless network setup vWav
9. automatically insereted Note the timecode grows from right to left This is the timecode you wish to cue to Once you have entered your timecode press the Cue button The timeline will now cue to the timecode you have entered Pressing Clear on the keypad will reset the timcode back to all zeros If you wish to cue to a shot it s a similar process Start typing in a number if the display on the CP200 TS says Cue to Timecode then press the Mode button on the keypad The display will change to say Cue to Shot Enter the shot number you wish to cue to and press Cue The timeline will now cue to the start of the shot number you have entered Pressing Clear on the keypad will reset the shot number back to 0 If you are not already in Cue you can start the process off by also pressing Clear Cue or Mode instead of starting to type in a number 43 Tangent Color Support Package User Manual v3 8 Rev 2 15 Button actions available in the Wave Control Mapper Below is a list of all the button actions you can assign to a button on a panel Note that you should refer to the Color user manual provided by Apple for more information Label for button action in the Wave Control Mapper Description Notes Add All To Queue Add every clip in the project to the queue for rendering Add Key Frame On the current clip add a new key frame at the current time Add Selected To Queue If there is a selec
10. indicated on the panels cccceeeeceeee 41 13 Notes on Red tab SUPPOFt ccceeeeeeeeeeeeeeneeeeeeeeeeeeeeenaeeeeeneeeeeeeeesaaeeeeeeeeeeeeees 42 Te MU ARAM enno he hs ests cock Geese se Ses ce ete thc eae a tected 42 13 27 PAC WONG oe cesta s cscs bea a osc death oan aa a aa a aeee Ea aa ENa EEEE 42 14 Notes on Cue CP200 TS sa iescccccieccccectentcctesecenecaientiedevecbuewelenttetenewenewetenenedetewens 43 15 Button actions available in the Wave Control Mappet cccccssssssseeeeeteees 44 16 Importing and exporting MAPS ssssssnnnssennnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 50 GSMs Impor a ac AA a he roe ee O ek Ace et eh 50 16 2 EO tar crenntr tor rach E A ea a enticement tenet tate 50 17 vWave Lite wireless network Setup eseeeeeeeeeeeeeeeeeneeeeneeeeeeeeeeeeneeeeneeeeeeeeees 50 18 Default maps supplied by Tangent cccesseeeeeeeeeeeeeeeeneeeeeeeeeeeseeeseneeeeeeeeees 51 18 1 Default Wave reiii enegie iaeoe ea Ea Ra ERA R Ea E RE 52 18 2 Default CP200 BK ii srce r e E E E heeeaee 54 18 3 Default CP200 BK TS hte eee ee Recs cated ee eee a eee Mier 55 18 4 Default R200 BK TS Kierre a a E E A E 57 18 5 Default GP200 BK TS K Siren rei tane dn E a aeeed 59 Tangent Color Support Package User Manual v3 8 Rev 2 1 Revision History Rev Number Changes Previous These were all beta versions 1 9rev 1 The first proper release 2 0
11. matches direction on monitor Requirements section added 3 8 rev 2 Added section 6 2 1 don t see the Control Surface Startup window This was missed in in the change over from 3 7 to 3 8 Tangent Color Support Package User Manual v3 8 Rev 2 2 About this manual The contents of this manual are intended for users of the Wave and CP200 panels with Apple s Color software It can be quite tricky to explain about controls on the control panel and controls in Color without causing confusion so we ve decided to adopt the following naming scheme Control this refers to a knob button or trackerball on the panel Knob this refers to a knob on the panel Button this refers to a button on the panel Action this refers to a keyboard or button type action in Color Parameter this refers to a control in Color like a slider or a value Map Mapping refers to how the controls on the panel are configured to work with Color Mapper this is short for the Panel Control Mapper When we refer to a button knob or trackerball by a number we number the controls from left to right starting with 1 This manual won t tell you how to use Color For that you need to refer to the Apple manual for Color Instead this manual tells you how to use your Wave or CP200 panels with Color and how to customise the way they do this Tangent Color Support Package User Manual v3 8 Rev 2 3 Requirements Any Mac that will suppo
12. on your panel onto any of the controls in Color You will find the Panel Control Mapper in Applications A handy hint is to drag the icon into the dock so it is easily accessible while you are customising your panel Panel Control Mapper The Panel Control Mapper presents you with a graphical representation of the panel You can click on a control in the application and assign a parameter or action in Color to it For controls that can be assigned to a knob or trackerball you can also set the sensitivity The bank controls also allow you type in a custom label which gets displayed next to the control Panel Control Mapper Wave Wave Control Mac Primary Ir ft er Gain Master Gamma Bane L Banc 2 Select A_Te 172 Function Shadows Maste M dtones Master Highlights Master 29 Tangent Color Support Package User Manual v3 8 Rev 2 Panel Conuol Mapper C7200 Default CP205 B lt TSK S secondaries CP 01 RK Si Il Trersitan Sii Angle Highliztts Mastar Midtoves Mester 11 1 Some quick notes about mapping We ve already mentioned that when you switch rooms in Color the panel will change what it s controlling to reflect the chosen controls for that room When you map a control on a panel you can use any parameter in Color from any room not just the room you are currently in For example say you want to control the Secondaries Shadows on a trackerball whilst you are in the Geometry roo
13. to 2 2 Internal beta versions not released Updated to include new features added in 2 3 release of plug in and mapper These were e Secondaries HSL Key controls e 10x Jog Speed 23 rev 1 e Mouse Emulator e Adjusted the default sensitivities for some of the parameters in the mapper e Added new controls to default map in the mapper e Added more of the most used buttons to the default map in the mapper 2 4to 3 5 Internal beta versions not released Updated to include new features added in 3 5 release of plug in and mapper These were e Support for CP200 panels in Mapper e Multiple custom Mapper files e New button actions including Command Z and Save Grade e Control for Red tab added ere e Global sensitivity controls e More buttons on panel can be customised including transport and ALT e Jog by clip mode e Improved layout of button actions list in Mapper e Import Export and Copy custom Mapper files e Control of the Red tab in the Primary In room e Sensitivity added for mouse emulator e ALT mode is indicated on panel displays Bug fixes in 3 6 for e Matte preview 3 7 rev 1 e Save grade e Adjustments to global sensitivity ranges e Resets on Primary In ceiling values and Geometry values vWave Lite iPad app support added Added section 16 Importing and exporting maps a oy Moved New in this release section to quick start guide Reversed direction of secondaries vignette angle so it
14. A left click or right click does different things as discussed below Bank 1 of 3 11 6 1 Adding removing and clearing a bank right click If you want to add a bank of buttons or knobs right click on the appropriate bank select button You will get a pop up menu that will allow you to add a bank The same pop up menu also has options to clear or remove the current bank Note that each room has at least one bank by default You can t delete this you can only clear it This is why the Remove Current Bank option is sometimes greyed out 11 6 2 Selecting a bank left click When you have more than one bank left clicking on the bank select button will step you through the banks Remember that it is the up arrow for knobs down arrow for buttons 11 7 Assigning ALTernative functions You can assign an ALTernative function in two ways e You can right click on the button knob trackerball and click on the Alternative button at the top of the window that pops up O Control Mapping COE N 4 Standard Alternate Copy gt Map Button 1 to Paste Bank 1 Bank Display Label Paste Bank 1 _ Apply in All Rooms C Cancel OK 37 Tangent Color Support Package User Manual v3 8 Rev 2 e Or you can click on the Standard Alternative button in the bottom left of the Mapper window Panel Contro Mapper Wave Wave Control Map If you do this all the displays in the Mapper update to show the
15. ALTernative function This is useful so you can quickly see which controls have ALTernative functions mapped to them 11 8 Note about function buttons and labelled keypad buttons on CP200 TS Although the function buttons can be mapped to do different things for each room in Color and they can also have an ALT function you need to consider carefully what you want them to do The reason for this is that the buttons have no display unlike the bank buttons to label what they do This means that it is up to you to remember what you have mapped them to So it makes sense to have these buttons do the same thing in every room but it is up to you to follow this advice and we have left you the flexibility to do what you want We have included a write on button overlay with the Wave panel so you can write something above each button to help remind you what you have mapped these to On the CP200 TS the same idea applies to the labelled and keypad buttons 11 9 Note on sensitivities There are two sets of sensitivities that are applied to parameters in Color There are a global set which can be found in Panel Control Mapper Preferences Global Settings The other set of sensitivities that are applied are the individual ones for each parameter that the panel allows you to set You can set these with the Panel Control Mapper Details on how to do this can be found in section 11 5 Mapping a control There is a 5 position slider that goes fr
16. Adcress 10 10 10 22 Note each IP Address must be different 2 m K CP200 5 v Panel In Use ww Panel In Use See Notes on IP Addresses Panel 13 9101 Perel ID 1121 b IP Address IP Aduress Clow 10 10 10 23 10 10 10 24 O ika HHE P iraquires a panel reboot if changed Cancel Sarem You can now click Save and go one to the section Selecting the Tangent plug in in Color 6 1 4 Notes On IP Addresses The IP Address used for each panel must be unique and must not be the same as IP Address assigned to any of the Ethernet ports on the Mac You can use DHCP to automatically assign an IP Address but you must have a DHCP server running on the Mac network the panels are connected to Note that if you change the Use DHCP setting then you will need to reboot the panels before running Color You can use any port on the Mac but we recommend that all the panels are connected to the same port via a hub An example of a typical configuration is shown below with four panels connected to port Ethernet 1 on the Mac Note the IP Adresses are all different and that the Mac port Ethernet 1 is configured Manually DHCP is not being used 12 Tangent Color Support Package User Manual v3 8 Rev 2 Your Mac Systems Prefrences Network window should look like this AAR Network 4ib Show All a Location Tangent Office HA Ethernet 1 ii Cornected i Status Connected Ethernet 1 is currently active and h
17. Cancel OK If you right click on the trackerball a dialog window appears that allows you to set your preferences for the Color parameters that you have assigned to it The Standard and Alternative buttons at the top let you switch between the standard and ALTernative parameters that have been assigned to the trackerball The Copy button allows you to copy the action assignment and settings from the standard to the ALTernative and vice versa The Map Trackball amp Dial 1 to button tells you the Color parameters it is mapped to You can click on this to change the parameters The Dial Sensitivity slider allows to you set how sensitive to dial movements the control is Setting the slider to low means you will need to turn the control more times to get a change Setting it to high means you will need less turns See section 11 9 Note on sensitivities The Trackball Sensitivity slider allows to you set how sensitive to ball movements the control is Setting the slider to low means you will need to move the control more times to get a change Setting it to high means you will need less movement See section 11 9 Note on sensitivities The Apply in All rooms check box allows you to have the same control appear in each of the rooms in Color 36 Tangent Color Support Package User Manual v3 8 Rev 2 11 6 Banks Use the bank selection buttons in the Mapper to access the bank features These are located next to the bank displays
18. KOM Da lhistoessGeiundt ria cededueh ates E AE AE AE A E h 16 Pd NG E E E hun iain edn aN ania 17 292 Trackerball reset erinan e ceeded E E R A RE 17 7 4 Ring MOSS bee cence sees eect cas at cc Ne oar te eR eee coe aa aieega oe cee reeet 17 7 5 Color connection indicator s 128 o ccexitaenwien RaeawdGa aan woenaeet 17 7 6 Sensitivity controls cneicl asters aearreisilacedtipaceienactes pasar acceitiesauiaakeseommacs 17 8 Quick tour of the Wave panel seeeeeeeeeeeeseeeneeeeeeeeeeeeeneseneeeeeeeeeseseeeeanees 18 8 1 Bank knobs and Dank DUtONS vccciccieteckcceesneaseey dechecseaneeeevvdeskedeneneenerebe aueenacts 18 8 2 Trackerballs and Gals ijic2 shee cavecsesdeksies sate veed dakctetsecereel des dteceethepel deeenutanante 18 8 3 Bank select buttons 2 cten Situ eein eke eaak GA ea meant Gu eaek eet 19 8 4A ALOE DUOM erari nene aaa aE e E ea A aeaea a A aeea Ea 19 8 5 Tansport buttons and jog Clalit cece coer sta creee a sees saat tee ead vats at eet aaldereuaadetert 19 SO APUNCHON GUTONS nerio a ied Santee a 20 9 A quick tour of the CP200 panel s cccccccesseeeeeeeeeeeeeeeseneeeeeeeeeeeeeeeeeeeeeneeees 21 9 T GP ZOO BK a R e E E R 21 S EAE eE A E A A MOLE SR nPeS Ani oem 21 9 1 2 Function DURNE e ee aa dite E eee E E TE 21 9 1 3 Track rballs And dials i sirenen aa e 21 9 2 CP200 F Samani e a ra a aa eI ae E cadet Glows 22 9 2 1 Tansport buttons and jog Ciall cece ceceeeeeeeeeeeeeeeeeeneeeeeeeeeeeee
19. Note we are referring to the Panel Control Mapper here and the bank that was selected when the room control map was last edited 11 5 2 Buttons Left Click If you left click on a button you get a pop up menu that allows you to choose the action in Color that you wish to assign to the button In some cases you can go to a second stage menu This is where we have grouped similar controls together by action or by the room to which they belong Right click O Control Mapping Standard Alternate Copy gt Map Button 1 to Paste Bank 1 Bank Display Label Paste Bank 1 _ Apply in All Rooms Cancel OK If you right click on the button a dialog window appears that allows you to set your preferences for the action in Color that you have assigned to it The Standard and Alternative buttons at the top let you switch between the standard and ALTernative actions that have been assigned to the button The Copy button allows you to copy the action assignment and settings from the standard to the ALTernative and vice versa The Map Button 1 to button tells you the Color action it is mapped to You can click on this to change the action 34 Tangent Color Support Package User Manual v3 8 Rev 2 The Apply in All rooms check box allows you to have the same button appear in each of the rooms in Color The button is put into the current bank that each room was last left in Note we are referring to the Wave Con
20. Tab Pan Scan Displays the Geometry room tab All other tabs in the room will be in the same state as they were when the room was last used except the Pan Scan tab which will be displayed Go To Geometry Room Tab Shapes Displays the Geometry room tab All other tabs in the room will be in the same state as they were when the room was last used except the Shapes tab which will be displayed Go To Geometry Room Tab Tracking Displays the Geometry room tab All other tabs in the room will be in the same state as they were when the room was last used except the Tracking tab which will be displayed Go To Primary In Room Displays the Primary In room tab All other tabs in the room will be in the same state as they were when the room was last used 44 Tangent Color Support Package User Manual v3 8 Rev 2 Go To Primary In Room Tab Advanced Displays the Primary In room tab All other tabs in the room will be in the same state as they were when the room was last used except the Advanced tab which will be displayed Go To Primary In Room Tab Basic Displays the Primary In room tab All other tabs in the room will be in the same state as they were when the room was last used except the Basic tab which will be displayed Go To Primary Out Room Displays the Primary Out room tab All other tabs in the room will be in the same state as they were when the room was last used Go To Pr
21. User Manual Tangent Color Support Package v3 8 Rev 2 for Wave the CP200 range and vWave Lite Tangent Wave Ltd Crowbush Farm Luton Road Toddington LU5 6HU UK www tangentwave co uk Tangent Devices Ltd Crowbush Farm Luton Road Toddington LU5 6HU UK www tangendevices co uk Tangent Color Support Package User Manual v3 8 Rev 2 T Revision HISTORY e r stat ence tee alee hth a alate 4 2 ADOUL this VNU tsa Secs sass s cca raa erara a ngs ete eter eee ene tee ened 5 3 R gq irementS isien ascetic chen ace eed cu ese tdeee ed dence heaaeec tenes phen 6 MALO OCU ON sco csc eek ase aa Se eee sea cecteabich veshe wes TT 7 5 Installing the SOftWAMEC ceccceeseeeeeeeeeeeeeeeeeeeeseeeeneeeeeeeeesseeeeneeeeeeeeeseeseeseneeees 8 6 Configuring the panels and COlOM eecceceeeseeeeseeeeeeeeeeeeeeeeeeeneeeeeeeseeeeeeeeeeee 9 6 1 Selecting the panel type and map in the Panel Control Mapper 9 6 1 1 WAN ONG oe e a E A aa EEO aaa 9 6 1 2 Wave and PLO a ceed ee ds Sate Sate cee ha oaa aL EE aces EES EEEN 9 6 1 3 Configuring the Ethernet IP Addresses CP200 only eeeeeeees 10 6 1 4 Notes On IP Addresses lt i 2 scete es tein teas apeniente die ect 12 6 2 Selecting the Tangent plug in in Color eeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeenneees 14 7 Quick tour of the VWave Lite iPad app ccccsseeeeseeeeeeeeeeeeeeeseeeeeeeeeeeeneeeeeeeeees 16 TAs TRAC
22. ab then selecting the Grades tab and clicking Save Change Vignette Shape This is the same as using the mouse to select a vignette shape from the menu in the Preview tab in the Secondaries room Note we only allow you to select either circle or square If you are using a user shape you will need to use the mouse Auto Balance This the same as using the mouse to click on the Auto Balance button in the Primary In room Copy To Selected This the same as using the mouse to click on the Copy To Selected button in a particular room For example under Primary In there is a Copy To Selcted which is the same as 47 Tangent Color Support Package User Manual v3 8 Rev 2 clicking on the Copy To Selected button in the Primary In room Copy To All This the same as using the mouse to click on the Copy To All button in a particular room For example under Primary In there is a Copy To All which is the same as clicking on the Copy To All button in the Primary In room Toggle Enable Clipping This the same as using the mouse to click on the Enable Clipping button in the Primary Out room Play Reverse Starts playback of the clip in the reverse direction Stop Playback Stops playback of the clip Play Forward Starts playback of the clip in the forward direction Inch Reverse Inches the clip forward by 1 frame Inch Forward I
23. and TS Caneel _ Save BK TS and K BK TS Kand S Select which one which fits your setup If there isn t one then you will need to adapt one of the ones supplied If you are using a Wave panel you can now click Save and go one to the section Selecting the Tangent plug in in Color Otherwise go on to the next section Configuring the Ethernet IP Addresses CP200 Only 6 1 3 Configuring the Ethernet IP Addresses CP200 only With the CP200 panels you need assign Ethernet IP Addresses for each of the panels 10 Tangent Color Support Package User Manual v3 8 Rev 2 Note If you have already been using the CP200 panels with Color using the Apple supplied Tangent Devices CP200 option in the Color Control Surface Startup dialog then you can make a note of the settings in there to use in the following steps But you should note that the settings in the Color Control Surface Startup dialog will have no effect on the new Tangent Color Plugin There is no need to specify a Gateway address in the new plug in In the Panel Control Mapper Preferences Active Panel Set CP200 i Map Selection G a Lr200 BR MM Panel in ise Panel ID 1234 CPZ0U 15 A Panel in tise Perel ID 5678 IP Address IP Adcress Preferences you need to select 10 10 20 21 10 10 10 22 CP200 as the panel type and then click on Panel Settings 22k crocs i Panel In Use M Panel In Use Panel ID 9101 IP Address
24. and global sensitivities apply e You cannot set the sensitivity of the dial which is the same as mouse scroll 12 6 How mouse emulator mode is indicated on the panels When mouse emulator mode is selected the displays on the panels will show Wave mouse will be displayed in the middle of the display above the trackerball it is assigned to CP200 e If it is assigned to the left trackerball the display on the BK panel will Show lt M Jesss in the gaps between controls e f it is assigned to the centre trackerball the display on the BK panel will show MS ccsnsacage lt M in the gaps between controls e If it is assigned to the right trackerball the display on the BK panel will Show EE M gt in the gaps between controls 41 Tangent Color Support Package User Manual v3 8 Rev 2 13 Notes on Red tab support Note You must have the Red plug in for Color installed These are the following controls available for the Red tab 13 1 Parameters The following is a list of parameters that can be assigned to a knob in the Mapper for the Red tab RED Tab Saturation RED Tab Kelvin RED Tab Tint RED Tab Exposure RED Tab Red Gain RED Tab Green Gain RED Tab Blue Gain RED Tab Contrast RED Tab Brightness These all relate to the Red tab which can be found in the Primary In room if you have installed the Red plug in Note These will only wor
25. are mapped in banks to the knobs Standard is low sensitivity ALTernative is high sensitivity Bank buttons Bank 1 Std Selects Room Alt Room resets select room tabs basic advanced etc undo and toggle mouse on centre trackerball Bank 2 Std Room specific actions Bank select buttons These have been mapped the same for each room Std Next knob bank Alt Next bnob bank A Std Next button bank Alt Next button bank Function buttons These have been mapped the same for each room Fi Std Paste Bank 1 Alt Copy Bank 1 F2 Std Paste Bank 2 Alt Copy Bank 2 F3 Std Paste Bank 3 Alt Copy Bank 3 F4 Std Paste Bank 4 Alt Copy Bank 4 F5 Std Paste Bank 5 Alt Copy Bank 5 F6 Std Alt F7 Std Next Grade Alt Previous Grade F8 Std Reset Grade Alt FQ Std Save Project Alt Revert Project Transport Buttons These have been mapped the same for each room Std Previous clip edit Alt Previous frame Std Next clip edit Alt Next frame Std Play revese Alt Std Play forward Alt Std Stop playback Alt 52 Tangent Color Support Package User Manual v3 8 Rev 2 ALT button This has been mapped the same for each room ALT Std Select ALTernative Function Alt Select ALTernative Function 53 Tangent Color S
26. as the address 10 10 1020 a Ethernet 2 Cornected FireWire Oo cai Configure iPv4 Manually sd e AirPort IP Address 10 10 10 20 off Subnet Mask 255 255 255 0 Router DNS Server Search Domains Canca al rh Click the lock to prevent further changes Assist me Revert 5 _ Apply 13 Tangent Color Support Package User Manual v3 8 Rev 2 Your Panel Control Mapper Panel Control Mapper Preferences Panel Settings window should look like this oats Preferences Pavel ID 12354 Panel ID S678 Active Panel Set CP200 Map Selection Global Settings Panel Settings CP200 BK CP200 TS W Panel In Use 4 Panel In Use IP Address I Acdress 19 10 10 21 10 10 10 22 CP200 K CP200 5 7 Panel In Use 7 Panel In Use Fadel ii Sit Harel 1 Tit IP Address I Acoress TP E LEEI Ei MI 1 E tae O use DHCP requires 2 panel reboot if changed E 4 Cancel Save hn 6 2 Selecting the Tangent plug in in Color You must have already completed the steps outlined in section 6 1 Selecting the panel type and map in the Panel Control Mapper Make sure your panel s are connected to your Mac and in the case of the CP200 that they are powered on Now start Color When you start Color you may get a pop up dialog window similar to the one shown below Don t worry if you don t as you can get to this window once Color is running as explained later is th
27. change with the rooms in Color we will ignore the function buttons and labelled keypad buttons on the CP200 TS for now as we will discuss these later in section 11 8 Note about function buttons and labelled keypad buttons on CP200 TS It may be that you want to control more things than you have knobs or buttons for in a particular room This is where banks come in A bank is just a collection of knobs or buttons that you want to display together at the same time If more knobs and buttons are required than can be displayed in one go you can simply add another bank You step through the banks of controls using the Bank Selection buttons These can be programmed to any button on the panel For example in Wave they are mapped to the up and down arrows above the function buttons You can have as many banks as you wish Adding banks is discussed in the section 11 6 1 Adding removing and clearing a bank right click 25 Tangent Color Support Package User Manual v3 8 Rev 2 10 2 1 CP200 Banks Each display in the CP200 has its own set of banks There are button actions you can assign that allow you to step backwards and forwards through each displays bank of controls e BK Next Knob Bank BK Previous Knob Bank TS Next Button Bank TS Previous Button Bank K Next Knob Bank For Row K Previous Knob Bank For Row S Next Button Bank For Row S Previous Button Bank For Row For the K and S panels where you have 4 dis
28. d RED Tab This is the same as clicking on the Red tab in Primary In room Note You need to have the Red plug in installed for this to work 48 Tangent Color Support Package User Manual v3 8 Rev 2 RED Toggle Enable This is the same as clicking on the Enabled button in the Red tab in Primary In room Note You need to have the Red plug in installed for this to work Previews Tab Opens the Previews tab in the Secondaries room Hue Curve Tab Opens the Hue Curve tab in the Secondaries room Sat Curve Tab Opens the Sat Curve tab in the Secondaries room Lum Curve Tab Opens the Lum Curve tab in the Secondaries room Tab lt 1 8 gt This selects which secondary is displayed 1 to 8 in the Secondaries room Next Room Goes to the next room in Color This follows the tab order at the top of the Color display Previous Room Goes to the previous room in Color This follows the tab order at the top of the Color display Next Secondary Goes to the next secondary in the Secondaries room These are the tabs along the bottom labelled 1 to 8 Previous Secondary Goes to the previous secondary in the Secondaries room These are the tabs along the bottom labelled 1 to 8 Next Keyframe This is the same as doing a option left arrow on the keyboard Previous Keyframe This is the same as doing a command option right arrow on the keyboard
29. e Tags the current grade as the master grade For finishing it will render with that grade only Set Player Marker In Set the player in marker Set Player Marker Out Set the player out marker Set Scope Resolution lt x gt Set the vector scope resolution to lt x gt Where x is 25 50 75 100 Still Store Transition Bottom To Sets the still store transition angle to 90 Top degrees Still Store Transition Left To Right Sets the still store transition angle to 180 degrees Still Store Transition Right To Left Sets the still store transition angle to 0 degrees Still Store Transition Top To Bottom Sets the still store transition angle to 90 degrees Store Still On the current clip create a new still To Project End Go to the end of the project To Project Start Go to the start of the project Toggle Grading On the current clip toggle between showing the grade and the identity of the clip Toggle Mouse Emulator On Left Trackerball Turns the left trackerball into a mouse Toggle Mouse Emulator On Center Trackerball Turns the center trackerball into a mouse Toggle Mouse Emulator On Right Trackerball Turns the right trackerball into a mouse Toggle Playback Mode Change the playback mode between play through all clips or play through just the active clip Toggle Secondary On the current clip enable or disable the secondar
30. e Color Panel Control Surface Startup dialog See section 6 2 Selecting the Tangent plug in in Color 6 1 2 Wave and CP200 Run the Panel Control Mapper this can be found in your applications folder EES It is a good idea at this point to drag the application into your dock so you can easily access it later Panel Control Mapper Preferances Active Panel Set Map Selection Global Settings Control Map Default Wave a Wave Control Map Go to the menu Control Panel Mapper Prefrences and select the panel type you are using Wave or CP200 Cance Save a ah Tangent Color Support Package User Manual v3 8 Rev 2 Praferances Active Panel Set Wave a _ a lt a suo Control Map Default Wave a Wave Control Map Now click on Map Selection Note with the CP200 panels you will have a slightly different window Cance Save aii Select a Map to use Wave If you upgrading from version 2 3 your old custom Map Eeafeennces will have been called Wave Control Active Panel Ser Wave Map and copied over to the new plug in The Default Map with a padlock next to it is the factory a A supplied default map Select this if you are are doing s new install and not an upgrade f Map Selection Global Settings CP200 There are four factory supplied default files with a padlock next to them which represent typical panel configurations BK only BK
31. e Lite uses your iPad wireless network connection to talk to the Tangent Color Plugin Make sure your iPad is connected to a wireless network The Mac running Color must be connected to the same wireless network as the iPad running vWave Lite Important Only one Mac running Color and the Tangent Color Plugin can be used on the same wireless network as the iPad running vWave Lite After you have selected the Tangent Color Plugin in Color run the vWave Lite app on your iPad The Color connection indicator in the app will change from flashing red to green to show it is connected 50 Tangent Color Support Package User Manual v3 8 Rev 2 18 Default maps supplied by Tangent There are default maps supplied by Tangent for each of the panel types These are indicated by a padlock next to the file name in the Mapper You cannot delete or rename these however you can copy them to use as the basis for your own custom map We have tried to map all the essential controls in a logical way but it is up to you to map the panels how you want to make them truly your own For Wave there is only one default file But for the CP200 panels where you may have a collection of panels of different types we have created four default files that best represent common systems The following sections describe the default maps 51 Tangent Color Support Package User Manual v3 8 Rev 2 18 1 Default Wave Bank knobs All the parameters for each room
32. e section don t see the Control Surface Startup window 14 Tangent Color Support Package User Manual v3 8 Rev 2 Control Surface Startup Would you ke to stari up tha chosen CTonctrol Surface Sure Ure Comil SUPE is onmes ea Tirst w lhis dialuy aycin Cenzro Saiface Tangent Colo Plegln v3 beta The Control Surface menu in the middle of the window allows you to choose what panel you are using with Color If this isn t set to Tangent Color Plugin then do this now Then press Yes After you have clicked Yes the displays on the panels should all say Connected To Color CP200 and Wave or in the case on vWave Lite the Color connection indicator in the app will turn green You now need to load a project Once you have done this the panels will load their control map and the displays will update to reflect this 6 2 1 don t see the Control Surface Startup window If you don t see the Control Surface Setup window then in Color go to the Setup room Click on the User Prefs tab at the bottom and then click on Show Control Surface Dialog which is at the top right of the User Prefs Don t forget you will have to load or create a project in Color in order to get to the rooms Once you have selected Tangent Color Plugin as the control surface type quit Color and restart it It is a good idea for now to also check the Show this dialog again option you can always turn this off again later 15 Tangent Color S
33. elow and note the names of the controls These controls are described in the following sections Bank Buttons Bank Select Buttons Function Buttons ALT Button Transport Buttons Trackerballs And Dials And Jog Dial 8 1 Bank knobs and bank buttons 8 2 These are the controls above and below the three displays The bank buttons will perform the action which is indicated in the display above the button The bank knobs will control the parameter which is indicated in the display below the knob The bank knobs have a built in reset if you press down on the knob you will activate a switch which will reset the parameter Changing rooms in Color changing banks with the Bank Buttons or pressing the ALT button will change what these are controlling Trackerballs and dials These controls are grouped into trackerball and dial pairs The trackerballs are typically used to control the colour balance of a picture while the dials control the master luminance But they can also be used to control things like position and zoom or can be assigned to emulate the mouse The buttons besides the trackerball and dials are the resets for these controls O Resets the dial control Q Resets the trackerball control Changing rooms in Color or pressing the ALT button will change what these are controlling 18 Tangent Color Support Package User Manual v3 8 Rev 2 8 3 8 4 8 5 Bank select buttons The
34. ess this from the panel both are configured through the Mapper 12 1 Program mouse on a trackerball If you look in the Secondaries room in the Panel Control Mapper you will see the following trackerball parameter Mouse Scroll This is like all other controls that are mapped to the panel using the Panel Control Mapper so you can assign it to any trackerball in any room and it can also be an ALTernative function on a trackerball 12 2 Program mouse toggle on a button If you look in the list of actions you can assign to a button you will see three new entries Toggle Mouse Emulator On Left Trackerball Toggle Mouse Emulator On Center Trackerball Toggle Mouse Emulator On Right Trackerball This is like all other controls that are mapped to the panel using the Wave Control Mapper so you can assign it to any button in any room and it can also be an ALTernative action 12 3 So why two methods In program mouse on a trackerball this uses up one of your trackerballs or ALTernative trackerball spaces in a room It might be tricky if you want the trackerballs to be active and doing the same thing in each room to find a free space to program the mouse The thing to remember is that when you program a mouse on a trackerball it is just like programming Shadows Master or Position Scale on a trackerball and it behaves just like any of these type of trackerball controls including holding down the ALT bu
35. esteeeeeeeees 22 9 2 2 Jog mode OUMO Mf ee cette eitec ee cea ek een Oso ese eee 22 9 2 3 Labelled buttons scctania aun icadawiGen Rance aaenweenicaaat 23 9 2 4 Keypad DUMONS vce cdaccessatecesctdacedtieacvelodecesoueamrsniacces he sceientakeemennnile 23 9 2 5 Bank DUONG ie scsnetsteceanl aeaa hada cena aa ha tna A nN tated 23 S276 MOPS DOM siene i a a e a boinc eden E RE T ET 23 9 3 GP ZOO seek r a E a E E a A EE 23 9 3 1 Bank KNOBS n e E eh eA 24 SA RN 721 00 hc eea e r ea A EE eS Seen ree aait 24 9 4 1 Bank DULONS at a a A e 24 SAA MOPS DUMOMS a reies ter a a a edie a See E a 24 10 Rooms Banks and ALTernatives cccccceeeessccssssssnseeeeesseeeonsssnneeeeeesaooes 25 MOST gO OMS r ax uestonsukewwhs a sxueesonektawwls maacmuonss 25 DO MAG sete eae eae ieee lyse eget A eget eg he a ce oat Aue ets oO 25 TOP SOP ZOO BANKS sce eE eleva cts Ouse eed lures arb EE EE EEE 26 POLS TOMMalives hires heaticcneceateivs attest retudnen aeelewetaaakemiane 26 10 3 1 How ALT mode is indicated on the panels ccceeeeeeeeeeeeeeeeeeeeees 27 11 Panel Control Mapper application customising your panels 0008 29 11 1 Some quick notes about MAPPING cece cece e eter ee teeeeneeeeeeeeeeetetee 30 11 2 Steps to making a custom MAPPING eee eect teeter ee eeeetteeeeeeeee rete 30 11 3 Selecting which room in Color you want to map controls tO 0 eee 31 11 4 Selecting which panel you want to map con
36. gent Color Support Package User Manual v3 8 Rev 2 8 6 Function buttons These buttons are generally used for actions that you want to always be available Changing rooms in Color or pressing the ALT button will change what these are controlling 20 Tangent Color Support Package User Manual v3 8 Rev 2 9 A quick tour of the CP200 panels 9 1 CP200 BK Bank Knobs Function Buttons f Trackerballs And Dials 9 1 1 Bank knobs The bank knobs will control the parameter which is indicated in the display above the knob The button to the right of a knob will reset the parameter Changing rooms in Color changing banks with the Bank Buttons or pressing the ALT button will change what these are controlling 9 1 2 Function buttons These buttons are generally used for actions that you want to always be available Changing rooms in Color or pressing the ALT button will change what these are controlling 9 1 3 Trackerballs and dials These controls are grouped into trackerball and dial pairs The trackerballs are typically used to control the colour balance of a picture while the dials control the master luminance But they can also be used to control things like position and zoom or can be assigned to emulate the mouse The buttons besides the trackerball and dials are the resets for these controls O Resets the dial control Q Resets the trackerball control 21 Tangent Color Supp
37. hese to do whatever you want In the default map supplied these are set to mimic what Apple had originally used these for which was to type in a shot or timecode to cue to 9 2 5 Bank buttons The bank buttons will perform the action which is indicated in the display above the button Changing rooms in Color changing banks with the Bank Buttons or pressing the ALT button will change what these are controlling 9 2 6 More button The more button are intended to allow you to step through the banks of buttons you have assigned Of course you can program this to do what you want 9 3 CP200 K Bank Knobs Row 1 Reset For Knob Row 4 23 Tangent Color Support Package User Manual v3 8 Rev 2 9 3 1 Bank knobs The CP200 K only has Bank Knobs The bank knobs will control the parameter which is indicated in the display above the knob Note that there are 4 rows of them The top row is row 1 and the bottom row is row 4 The button to the right of a knob will reset the parameter Changing rooms in Color changing banks with the Bank Buttons or pressing the ALT button will change what these are controlling 9 4 CP200 S Row 1 More Button Row 4 9 4 1 Bank buttons The bank buttons will perform the action which is indicated in the display above the button Note that there are 4 rows of them The top row is row 1 and the bottom row is row 4 Changing rooms in Color changing banks with the Bank Buttons
38. holding the ALT button or press a button then the alternative function is controlled The idea behind ALTernatives is so that you have quick access to a parameter or action that could be associated to the normal one assigned to that control without having to change banks For knobs an example of using this would be to have the normal control to be fine control of a parameter and the ALTernative control to be coarse control Holding down the ALT and moving the knob would quickly get you to the ball park value then releasing ALT will allow you to fine tune to the value you require With buttons you could have paste assigned to the normal action and copy to the ALTernative action Of course you can make use of the ALTernatives any way you like The above are just given as examples to make the explanation clearer 10 3 1 How ALT mode is indicated on the panels When ALTernative mode is selected the displays on the panels will show Wave ALT will be displayed in the middle of each panel display CP200 A single vertical line separating controls on the panel displays means you re in normal mode A double vertical line separating controls on the panel displays means you re in ALTernative mode 27 Tangent Color Support Package User Manual v3 8 Rev 2 The table below may help to explain the relationship of rooms banks and ALTernatives Color Room K
39. imary Out Room Tab Advanced Displays the Primary Out room tab All other tabs in the room will be in the same state as they were when the room was last used except the Advanced tab which will be displayed Go To Primary Out Room Tab Basic Displays the Primary Out room tab All other tabs in the room will be in the same state as they were when the room was last used except the Basic tab which will be displayed Go To Render Queue Room Displays the Render Queue room tab All other tabs in the room will be in the same state as they were when the room was last used Go To Secondaries Room Displays the Secondaries room tab All other tabs in the room will be in the same state as they were when the room was last used Go To Secondaries Room Tab lt x gt Displays the tab for secondary x The tabs are the tabs at the bottom of the Secondaries room with are labelled 1 to 8 Go To Secondaries Room Tab Advanced Displays the Secondaries room tab All other tabs in the room will be in the same state as they were when the room was last used except the Advanced tab which will be displayed Go To Secondaries Room Tab Basic Displays the Secondaries room tab All other tabs in the room will be in the same state as they were when the room was last used except the Basic tab which will be displayed Go To Setup Room Displays the Setup room tab All other tabs in the room will be in the same state as the
40. ked if programmed in the Primary In room in the Mapper If you move a knob that has one of these assigned to it the Red tab in the Primary In room will automatically open Although you can set the display type for the panel for the above parameters because of the way control is implemented by the Tangent plug in the displays on the panel will not reflect the value on the Color user interface It is suggested that you leave the display type as none when you assign one of these to a knob 13 2 Actions The following is a list of actions that can be assigned to a button in the Mapper for the Red tab RED Tab This is the same as clicking on the Red tab in Primary In room RED Toggle Enable This is the same as clicking on the Enabled button in the Red tab in Primary In room 42 Tangent Color Support Package User Manual v3 8 Rev 2 14 Notes on Cue CP200 TS By default on the CP200 TS the numerical keypad keys have been assigned to perform functions related to the Cue action The Cue command works in the following way as implemented by Apple If you start typing in number using the numerical keypad the display on the CP200 TS will say Cue to Timecode or Cue to Shot depending on what mode you are in Mode will be explained later but for now let s just stick with Timecode As you continue to type in a number it will come up as a timecode with the between the digits
41. l v3 8 Rev 2 Note Only panels that you have ticked as In Use in the Panel Control Mapper Preferences Panel Settings will be shown 11 5 Mapping a control If you click on a knob or a button you will get a pop up menu or a dialog window depending on whether you left click or right click These will enable you to choose the Color function to map to the control and set your preferences for it These are discussed below 11 5 1 Knobs Left Click If you left click on a knob you get a pop up menu that allows you to choose the Color parameter you wish to assign to the knob Note the first stage menu selects which room in Color the parameter is normally found The next stage menu selects the parameter in that room Note if the parameter is greyed out it means that you have already selected it in the current bank You can only have a parameter selected once in each bank 32 Tangent Color Support Package User Manual v3 8 Rev 2 Right click a Control Mapping Alternate Copy gt Map Knob 1 to Position X Bank Display Label Position X Bank Display Type Number req Knob Sensitivity 7 Low Medium High __ Apply in All Rooms Cancel f OK If you right click on the knob a dialog window appears that allows you to set your preferences for the Color parameter that you have assigned to it The Standard and Alternative buttons at the top let you switch between the standard and ALTernative para
42. m Well this is easy you just go to the Geometry room in the Wave Control Mapper and click on the trackerball and select Secondaries Shadows from the list 11 2 Steps to making a custom mapping When you make a custom mapping you need to follow these steps 1 2 3 4 5 Make a note of what controls in Color you want to map to the panel Run the Panel Control Mapper application Go to the room in the Panel Control Mapper where you want to add or change a control Make the changes to that control Save the changes If Color is running the panel will automatically update to reflect the changes You will find save in the file menu in the Panel Control Mapper 30 Tangent Color Support Package User Manual v3 8 Rev 2 11 3 Selecting which room in Color you want to map controls to Pzcel Control Mapper 2200 Defan t C200 Be TS ES S Il Trans tion zall Angle The tabs across the top of the Mapper are the rooms you can map Wave to These are e Setup Primary In Secondaries Color FX Geometry Primary Out Geometry Still Store e Render Queue Click on the tab for the room you want to change the mapping for 11 4 Selecting which panel you want to map controls on CP200 only Panel Control Mapper 7200 Defaut CF200 Ex TEKS The tabs across the top of the Mapper below the room tabs allow you to select which CP200 panel you are mapping controls on 31 Tangent Color Support Package User Manua
43. meters that have been assigned to the knob The Copy button allows you to copy the parameter assignment and settings from the standard to the ALTernative and vice versa The Map Knob 1 to button tells you the Color parameter it is mapped to You can click on this to change the parameter The Bank Display Label text entry box allows you to type in your own choice of label for the knob This is the name that will appear on the display below the knob on the Wave panel The Bank Display Type menu button allows you to choose how the value of the parameter is displayed on the panel This will be shown on the display below the name of the parameter on the panel The options are e Blank no value displayed e Percentage displayed as a value of the full range e Bar displayed as a bar graph which grows from left minimum to right maximum e Number displayed as a number that matches the one displayed on the Color display 33 Tangent Color Support Package User Manual v3 8 Rev 2 The Knob Sensitivity slider allows to you set how sensitive to knob movements the control is Setting the slider to low means you will need to turn the control more times to get a change Setting it to high means you will need less turns See section 11 9 Note on sensitivities The Apply in All rooms check box allows you to have the same knob appear in each of the rooms in Color The knob is put into the current bank that each room was last left in
44. nches the clip reverse by 1 frame Toggle Jog By Clip This toggles the jog dial between jogging by frames or jogging by clip Cue Oo OOAOANDOARWN DO Clear Mode These all relate to Cue and are only really intended for the CP200 TS In Color you can cue to a particular shot edit clip or to a timecode The Mode controls this When you start typing a number the TS display will indicate the shot or timecode number you are typing in Pressing Cue will move the timeline to that postion Clear will clear the numbers you have typed in See section 14 Notes on Cue CP200 TS BK Next Knob Bank BK Previous Knob Bank This selects the previous next bank of knobs on the CP200 BK for the current room TS Next Button Bank TS Previous Button This selects the previous next bank of buttons on the CP200 TS for the current room Next Knob Bank For Row Previous Knob Bank For Row Next Button Bank For Row Previous Button Bank For Row The CP200 K and S panels each have four displays rows which can have individual banks programmed to them These buttons select the previous or next bank for a row Row 1 is the top display and row 4 is the bottom display Toggle Jog By Clip This toggles the jog dial between jogging by frames or jogging by clip Note This has already been hardwired to the button next to the jog dial on the CP200 TS This button on the CP200 TS cannot be customise
45. nob Bank 1 Knob 1 Normal function ALTernative function Knob 2 Normal function ALTernative function e e e up to knob 9 Knob Bank 2 Knob 1 Normal function ALTernative function Knob 2 Normal function ALTernative function e e e up to knob 9 e e e up to n banks Button Bank 1 Button 1 Normal function ALTernative function Button 2 Normal function ALTernative function up to button 9 Button Bank 2 Button 1 Normal function ALTernative function Button 2 Normal function ALTernative function up to button 9 up to n banks Trackerball Dial 1 Normal function ALTernative function up to trackerball dial 3 Function Button 1 Normal function ALTernative function up to function button 9 other Color rooms n as many banks as you need 28 Tangent Color Support Package User Manual v3 8 Rev 2 11 Panel Control Mapper application customising your panels The Panel Control Mapper allows you to customise what the controls on your panels do in Color Note You cannot customise what the controls in vWave Lite do in Color These are fixed in controlling the colour differentials in the Primary In Secondaries and Primary out rooms If you haven t installed the Tangent Color Support package on your Mac you should do so now The Panel Control Mapper application allows you to customise the mapping of the controls
46. ntrol mapping supplied You will however need to run the Panel Control Mapper once to configure which panels you are going to use If you make a custom mapping this is stored within your home directory You can have more than one custom map allowing you to have different configurations to suit the type of work you are currently doing Or where multiple users all use the same login on the Mac each user can have their own configurations Tangent Color Support Package User Manual v3 8 Rev 2 5 Installing the software Insert the disc that came with your Wave panel into your Mac Or if you are a CP200 user you will need to download the package from our website Open the disc in a finder window by double clicking on the disc icon Wave only Double click on the Tangent Color Support package to start the installation and follow the on screen instructions Tangent Color Support v3 0 You may be prompted to enter your password This is the password for your user account on your Mac and the password that you enter when you update your Mac s system software Tangent Color Support Package User Manual v3 8 Rev 2 6 Configuring the panels and Color Make sure you have installed the Tangent Color Support package as described in section 5 Installing the software 6 1 Selecting the panel type and map in the Panel Control Mapper 6 1 1 vWave Lite You do not need to do anything except select the Tangent Color Plugin in th
47. om low to high The sensitivity values on the slider have the following effect Sensitivity Effect setting 38 Tangent Color Support Package User Manual v3 8 Rev 2 Low This adjusts the parameter by the smallest amount possible with the Wave panel It may take many turns in order to move cover the full range of values The number of turns will depend on the range of the parameter Approximately 50 full turns of the knob dial will be required to cover the full range of the parameter Medium Approximately 35 full turns of the knob dial will be required to cover the full range of the parameter Approximately 20 full turns of the knob dial will be required to cover the full range of the parameter High Approximately 5 full turns of the knob dial will be required to cover the full range of the parameter For the trackerballs the same idea applies but the slider positions don t relate to a particular number of turns it is just a linear multiplication of the raw control movement Note The sensitivities in the Color Setup Room User Prefs tab have no effect on the panel controls and are not used 39 Tangent Color Support Package User Manual v3 8 Rev 2 12 Mouse Emulator Note mouse control is not intended for use outside of Color There is a mouse emulator which turns a trackerball and its reset buttons into mouse There are two ways you can acc
48. ons knobs for the current room Previously on Wave these next actions we hard wired into the bank select buttons but these can now be programmed With the CP200 panels each panel has a different number of displays Each display can have its own set of banks Using these actions will step through all the displays on all the panels Undo This is the same as doing a command Z on the keyboard Change Matte Preview This is the same as using the mouse to click on the matte preview buttons next to the matte display in the Preview tab in the Secondaries room The button toggles through the 3 options available Toggle Vignette Outline This is the same as using the mouse to click on the vignette outline button next to the matte display in the Preview tab in the Secondaries room Reset lt room gt This is the same as using the mouse to click on the Reset lt room gt button in the ina particular lt room gt For example under Primary In there is a Reset Primary In which is the same as clicking on the Reset Primary In button in the Primary In room Reset All Secondaries This is the same as using the mouse to click on the Reset All Secondaries button in the Secondaries room Reset Secondary This is the same as using the mouse to click on the Reset Secondary button in the Secondaries room Save Grade This is the same as using the mouse to click on the Setup Room t
49. or pressing the ALT button will change what these are controlling 9 4 2 More buttons The more buttons are intended to allow you to step through the banks of buttons you have assigned Of course you can program these to do what you want Each row has its own More button 24 Tangent Color Support Package User Manual v3 8 Rev 2 10 Rooms Banks and ALTernatives Let s have a quick look at how the controls are mapped in Color The general idea is that as you change rooms in Color the controls that the panels are mapped and change to reflect the controls in that room What controls are mapped can be customised by you but we will come on to that later in section 11 Panel Control Mapper application customising your panels For now we need to understand what happens when you change rooms and how controls are accessed in that room 10 1 Rooms As we ve already explained as you change rooms in Color the panels will change what they are controlling to reflect the controls in that room The controls that change are e Bank knobs Bank buttons Trackerballs and their dials Function buttons And if you have a CP200 TS the block of labelled buttons on the left The following are the rooms the panels can have controls mapped to Setup Primary In Secondaries Color FX Geometry Primary Out Geometry Still Store Render Queue 10 2 Banks Each panel only has a limited number of buttons and knobs that can be mapped to
50. ort Package User Manual v3 8 Rev 2 9 2 CP200 TS Bank Buttons e Keypad Buttons More Button yp Jog Mode Button A Labelled Buttons Transport Buttons ALT Button And Jog Dial 9 2 1 Tansport buttons and jog dial The transport buttons will perform the following actions Go to previous clip ALT Inch one frame reverse Got to next clip ALT Inch one frame forward Play reverse a Stop Play forward Rotating the jog dial clock wise will move the clip forward one frame at a time as long as the jog dial is moving Moving it in a counter clock wise direction will move the clip in reverse in the same way If you press ALT while turning the jog dial you will get a 10x jog speed Note These buttons can be customised The above describes the default mapping 9 2 2 Jog mode button The jog mode button to the left of the jog dial toggles between jogging by clip or jogging by frame Note This button can not be programmed 22 Tangent Color Support Package User Manual v3 8 Rev 2 9 2 3 Labelled buttons These are the labelled buttons in a group on the left of the panel DO UNDO REDO etc You can program these to do whatever you want In the default map supplied these are set to mimic what Apple had originally used these for 9 2 4 Keypad buttons These are the labelled buttons in a group on the right of the panel 1 2 3 CLEAR MODE etc You can program t
51. plays there are previous next bank buttons for each of the displays where row 1 is the top display and row 4 is the bottom display However you can gang all the displays together and step through all the banks on every display on every panel by using e Previous Bank e Next Bank Where a display does not have a bank of controls programmed it will go blank The following example may help to clarify this The BK has 2 banks programmed to its display Bank 1 Bank 2 The K has 4 banks programmed to one of its displays Red Gain Blue Gain Grn Gain Red Lift Blue Lift Grn Lift Bank 1 Pos X Pos Y Zoom Bank 2 Aspect Rotation Bank 3 Key Blur Softness Shad Sat Bank 4 Hi Sat Repeatedly pressing the Next Knob Bank will display the following BK K Red Gain Blue Gain Grn Gain Pos X Pos Y Zoom Red Lift Blue Lift Grn Lift Aspect Rotation Key Blur Softness Shad Sat Hi Sat Red Gain Blue Gain Grn Gain Pos X Pos Y Zoom 10 3 ALTernatives Each knob button and trackerball can have an alternative parameter or action assigned to it This is what the ALT button is for If you press and hold the ALT button the displays on the bank knobs and buttons change to show you the alternative parameter or action assigned to that control If you move the 26 Tangent Color Support Package User Manual v3 8 Rev 2 knob while
52. rt Color as supplied in the Apple Final Cut Studio suite of tools Latest Tangent Color Support Package available for the Tangent website Mac OS X 10 6 or greater Color 1 5 or later as supplied in the Apple Final Cut Studio suite of tools Spare Ethernet connection for CP200 only Spare full power USB 1 0 or USB 2 0 port for Wave only Wireless connection for vWave Lite only iPad for vWave Lite only with latest OS installed Tangent Color Support Package User Manual v3 8 Rev 2 4 Introduction Wave is a generic USB HID device and is recognised as such by Mac OS X so it needs no special operating system drivers It communicates with your Mac via the USB cable and also receives its power from the same cable The CP200 panels need no drivers as they are Ethernet based The only thing you need to do is configure the Ethernet on the Mac Power for the panels comes from an external power supply for each panel The panels all connect using standard Cat 5 cables not supplied Although the panels do not need a driver to work with Mac OS X they do need a plug in to enable them to talk to Color Also in order for you to customise how the panels control Color there s an application called the Panel Control Mapper These are bundled together in a Mac OS X installation package called Tangent Color Support Once you have installed the Tangent Color Support package you can start using your panels straight away with the default co
53. se are the up and down arrow buttons above the function buttons Steps through the different banks of controls on the bank knobs Steps through the different banks of controls on the bank buttons See section 10 Rooms Banks and ALTernatives for more information on Banks Note These buttons can be customised The above describes the default mapping ALT button Pressing the ALT button will switch all the knobs dials buttons and trackerballs to control their alternative ALTernative parameter or action See section 10 Rooms Banks and ALTernatives for more information on ALTernatives Note This button can be customised The above describes the default mapping Tansport buttons and jog dial The transport buttons will perform the following actions Go to previous clip ALT Inch one frame reverse Got to next clip ALT Inch one frame forward Play reverse a Stop Play forward Rotating the jog dial clock wise will move the clip forward one frame at a time as long as the jog dial is moving Moving it in a counter clock wise direction will move the clip in reverse in the same way If you press ALT while turning the jog dial you will get a 10x jog speed These controls are permanently mapped to these actions and can not be changed They are not affected by changing rooms Note These buttons can be customised The above describes the default mapping 19 Tan
54. tion made on the timeline then add them to the queue for rendering Blue Channel Waveform Display the blue channel on the waveform Change Key Frame On the current key frame change the interpolation type between linear smooth and constant Copy Current Grade Bank lt x gt On the current clip copy the grade to the bank x X is one of the 5 copy paste banks in Color Copy Grade From Previous Clip On current clip copy the grade from the previous clip on the timeline If there is no previous clip then no copy is performed Cut Edit On the current clip perform a cut at the current time Delete Key Frame Delete the current key frame Go To Color FX Room Displays the Color FX room tab All other tabs in the room will be in the same state as they were when the room was last used Go To Color FX Room Tab Color FX Bin Displays the Color FX room tab All other tabs in the room will be in the same state as they were when the room was last used except the Color FX Bin tab which will be displayed Go To Color FX Room Tab Parameters Displays the Color FX room tab All other tabs in the room will be in the same state as they were when the room was last used except the Parameters tab which will be displayed Go To Geometry Room Displays the Geometry room tab All other tabs in the room will be in the same state as they were when the room was last used Go To Geometry Room
55. trol Mapper here and the bank that was selected when the room control map was last edited 11 5 3 Trackerballs and their dials Left click If you left click on a trackerball you get a pop up menu that allows you to choose the Color parameters you wish to assign to the trackerball and its dial Note the first stage menu selects which room in Color the parameters are normally found The next stage menu selects the parameters in that room Note the trackerballs and dials are grouped as follows and this grouping cannot be changed Trackerball Dial Parameters controlled Trackerball shadows colour differential Dial shadows master luminance Trackerball midtones colour differential Dial midtones master luminance Trackerball highlights colour differential Dial highlights master luminance Trackerball position of the centre of the secondary key Dial size of the secondary key Trackerball position of the geometry centre Dial geometry size Trackball mouse x and y Dial mouse scroll wheel Shadows Master Midtones Master Highlights Master Vignette Center Size Position Scale Mouse Scroll 35 Tangent Color Support Package User Manual v3 8 Rev 2 Right click oO Control Mapping Copy gt Map Trackball amp Dial 1 to Position Scale Dial Sensitivity Low Medium High Trackball Sensitivity a Low Medium High _ Apply in All Rooms
56. trols on CP200 only 31 Tangent Color Support Package User Manual v3 8 Rev 2 11 5 Mapping a control ses sees eset ocean eas hotest rennet sho ese eee 32 WB TOS aisr coed eet eed areca tac faite E ate E E a a A 32 115 2 BUONS seinere neee eet edie ud2ae ch nendoe syd cece ce edac eda essee deans 34 11 5 3 Trackerballs and their dials t cicca vce dA eas eet 35 TVG BANKS iiare ee dee eesti ei eae de ee 37 11 6 1 Adding removing and clearing a bank right Click 37 11 6 2 Selecting a bank left click ee eeeeeeceeee eee eeeeeeeeeaceeeeeeeeeeeeeeesaaeees 37 11 7 Assigning ALTernative fUNCtIONS cccceeeeeeeeeeeeetee teeter ee eeeeenneeeeeeeeeeeeeeee 37 11 8 Note about function buttons and labelled keypad buttons on CP200 TS 38 11 9 Note OMVSCMSIIVIIGS is ak corset ee Stace i retard t cate recreated cieted wer ee 38 12 MOUSE Emulator rritaren ces Secs eee al eee ee eae 40 12 1 Program mouse on a trackerOal vcccissctetooctsenets aedeeiecieneds andesite tele 40 12 2 Program mouse toggle on a DUTION eee ceeeeeeee eter eee teteeneeeeeeeeeeeteeee 40 12 3 So why two IMGINOGS iad ecee sete aentet tue ete rece vet eeatetennaenent eens vresnatuntemedieta de 40 12 4 Mouse buttons and control mapping used c ecceeeeeeeeeeeeetteeeeeeeeeeteeee 41 12 5 Notes on mouse emulator SeNSItIVILICS 00 2 eect eter ee ee eeeetteeeeeeeteeeteeee 41 12 6 How mouse emulator mode is
57. tton if it s an ALTernative function Now to save you using up a free trackerball space you can program mouse on a toggle button What you are doing here when you press the button you ve assigned this action to is to switch on the mouse emulator for the trackerball you ve chosen This overrides what was on that trackerball until you press the button again which switches the mouse emulator off So for example program Toggle Mouse Emulator On Center Trackerball to be button F1 in every room Now when you want to access the mouse in any room just press F1 When you re done using the mouse emulator just press 40 Tangent Color Support Package User Manual v3 8 Rev 2 F1 again to turn it off You ll note that the display above the trackerball you re using will show mouse in the centre when mouse emulator is on and you re using the program mouse on a toggle button method 12 4 Mouse buttons and control mapping used When using the mouse emulator the controls are mapped as follows O Mouse secondary button click Q Mouse primary button click Trackerball Moves the mouse pointer Dial Mouse scroll wheel 12 5 Notes on mouse emulator sensitivities e f you choose to use the Toggle Mouse Emulator On Trackerball button action then only the global sensitivities apply e f you choose to use the Mouse Scroll way of assigning the mouse emulator then both the parameter
58. upport Package User Manual v3 8 Rev 2 18 2 Default CP200 BK Bank knobs All the parameters for each room are mapped in banks to the knobs Standard is low sensitivity ALTernative is high sensitivity Function buttons These have been mapped the same for each room F1 Std Select ALTernative Function Alt Select ALTernative Function F2 Std Go To Next Room Alt Go To Previous Room F3 Std Next Knob Bank Alt Previous Knob Bank F4 Std Paste Bank 1 Alt Copy Bank 1 F5 Std Paste Bank 2 Alt Copy Bank 2 F6 Std Paste Bank 3 Alt Copy Bank 3 F7 Std Play Reverse Alt Previous Edit F8 Std Sop Playback Alt F9 Std Play Forward Alt Next Edit 54 Tangent Color Support Package User Manual v3 8 Rev 2 18 3 Default CP200 BK TS BK Bank knobs All the parameters for each room are mapped in banks to the knobs Standard is low sensitivity ALTernative is high sensitivity Function buttons These have been mapped the same for each room F1 Std Next Knob Bank Alt Previous Knob Bank F2 Std Alt F3 Std Alt F4 Std Paste Bank 1 Alt Copy Bank 1 F5 Std Paste Bank 2 Alt Copy Bank 2 F6 Std Paste Bank 3 Alt Copy Bank 3 F7 Std Paste Bank 4 Alt Copy Bank 4 F8 Std Paste Bank 5 Alt Copy Bank 5 F9 Std Alt TS Labelled Buttons These have been mapped the same for each room
59. upport Package User Manual v3 8 Rev 2 7 Quick tour of the vWave Lite iPad app vWave Lite allows you to control the Lift Gamma and Gain colour differentials and masters in the Primary In Secondaries and Primary Out rooms from your Apple iPad This is done through the vWave Lite app which you can download from Apple iTunes As you change rooms in Color the trackerball controls are mapped to the colour differential and master controls of that room if the room has them Important Please read section 17 vWave Lite wireless network setup first Note You cannot customise what the controls in vWave Lite do in Color To run vWave Lite click on the vWave Lite icon on your iPad Take a look at the diagram of the vWave Lite app screen The controls on the vWave Lite screen are explained in the following sections Color connection Trackerball indicator is Ring reset Ring Trackerball Sensitivity controls 7 1 Trackerball In the Primary In Secondaries and Primary Out rooms in Color the trackerballs control the colour differentials lift gamma gain Lift is the left trackerball gamma is the middle and gain is the right just as they are in Color To move the trackerball place a finger anywhere on the trackerball the red area and move the finger in the direction required You can flick the control to make the ball spin 16 Tangent Color Support Package User Manual v3 8 Rev 2 7 2 7 3
60. y were when the room was last used Go To Still Store Room Displays the Still Store room tab All other tabs in the room will be in the same state as they were when the room was last used Green Channel Waveform Display the green channel on the waveform Histogram Waveform Display the histogram on the waveform Luma Y Waveform Display the luma channel on the waveform Joins two shots separated by a through edit at Merge Edit the current position of the playhead into a single shot Next Edit Move to the next edit clip or end On the current clip move to the next grade If Next Grade one does not exist create one up toa maximum of 4 Overlay Waveform Display overlay on the waveform Parade Waveform Display parade on the waveform 45 Tangent Color Support Package User Manual v3 8 Rev 2 Paste Current Grade Bank lt x gt On the current clip paste the grade from bank x X is one of the 5 copy paste banks in Color Previous Edit Move to the previous edit clip or start Previous Grade On the current clip move to the previous grade Print Queue Render all events in the queue Red Channel Waveform Display the red channel on the waveform Reset Grade On the current clip reset the selected grade Revert Project Reverts the project back to its last saved state Save Project Saves the project Set As Beauty Grad
61. y for the current secondary tab displayed 1 to 8 Toggle Secondary In Out On the current clip enable or disable the secondary s inner or outer control for the current secondary tab displayed 1 to 8 Toggle Secondary Vignette On the current clip enable or disable the secondary s vignette for the current secondary tab displayed 1 to 8 Toggle Still Store Set the still to be shown or hidden Toggle Alternative Function When you press the button the panel will display and use the ALTernative function for any control that has one assigned When you press the button again the panel goes back into displaying and using the standard function Note you need to program the ALTernative function for the button to also be Select Alternative Function 46 Tangent Color Support Package User Manual v3 8 Rev 2 Select Alternative Function When you press and hold the button down the panel will display and use the ALTernative function for any control that has one assigned When you release the button the panel goes back into displaying and using the standard function This is the same way the ALT button worked on the previous version of the Wave plug in Note you need to program the ALTernative function for the button to also be Select Alternative Function Next Button Bank Previous Button Bank Next Knob Bank Previous Button Bank This selects the next previous bank of butt

User Manual - Tangent Wave

Contents

Download Pdf Manuals

Related Search

Related Contents