Memory Card Drive Operating Instructions
Contents
1. to alert the user to the presence of important operating and maintenance service instructions in the literature accompanying the appliance B DO NOT REMOVE COVER OF AC ADAPTER To reduce the risk of electric shock do not remove cover No user serviceable parts inside Refer servicing to qualified service personnel WARNING eTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE eTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT CAUTION TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE USE THE RECOMENNDED ACCESARRIES ONLY CAUTION THE AC OUTLET MAINS SOCKET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE FCC NOTICE Declaration of Conformity Model Number AJ PCD10P Trade Name PANASONIC Responsible Party Matsushita Electric Corporation of America One Panasonic Way Secaucus NJ 07094 Support contact Panasonic Broadcast amp Tlevision Systems Company 1 800 524 1448 This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause u2. Panasonic Operating Instructions Memory Card Drive raptus DVCPRO 50 TWCPRU DN Connect the Memory Card Drive to a personal computer before installing the P2 driver to the computer from the installation CD For details refer to the Installation Manual Before operating this product please read the instructions carefully and save this manual for future use Table of Contents Precautions for Use liliis nes 3 MC AMT E 6 Eg m 6 Supplied Accessories llis esee 6 Parts and their Functions 0 cece eee 7 Front Panelis raea A a e E S SWS Re A EO 7 HearPanel 204 604 etn oe A e Re T A a 7 Inserting a P2 Card nuuanu nana 8 Write protection of P2 Card isssssesseees eee 8 Installation 5o meurent fom ED HP EE 8 To Connect the P2 drive to a Personal Computer for External Use 9 To Mount the P2 drive in a Personal Computer 5 inch Bay 10 Specifications vs hese nade REE a RE aR UR E 11 Windows Windows 2000 and Windows XP are trademarks of Microsoft Corporation of the United States Other names of companies and products are trademarks or registered trademarks of the respective companies Precautions for Use Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY This product is equipped with 2 type
3. display all five card slots To disconnect the USB cable select Safety Remove Hardware from the System tray on the taskbar de activate Panasonic P2 Series USB Device then unplug the cable To Mount the P2 drive in a Personal Computer 5 inch Bay 1 Turn OFF the personal computer s power 2 Undo the six screws and remove the cover 3 Mount the P2 drive in a 5 inch bay on the personal computer Use the screws supplied with the P2 drive for mounting Please refer to your computer s instruction manual for guidance in mounting to 5 inch bay drives Screws 4 Plug the USB 2 0 cable B connector into the USB 2 0 connector on the P2 drive then plug the A connector into the USB 2 0 port on the motherboard of the personal computer amp eco i DEIN TY pen tv wen Oca a 9 e USB 2 0 connector 10 lt Note gt USB 2 0 connector pinouts vary according to the type of motherboard type Check your computer s instruction manual before purchasing a commercially available USB 2 0 cable shielded 5 Connect the P2 drive to the internal power cable 4 pins of the personal computer y o6 iov DC IN 12V ee a p of Power cable 6 Start the personal computer and verify that it recognises the P2 drive lt Notes gt The P2 drive may not be able to be fa
4. e Clamp Use this clamp to secure the AC adapter cable when connecting the P2 drive to a personal computer for external use of the Drive Antitheft Lock A commercially available antitheft cable can be connected to this lock Inserting a P2 Card When inserting a P2 card into the slot in the P2 drive make sure you keep the card La horizontal as you ease it in J Forcing the card in on an angle may cause a problem Write protection of P2 Card A P2 card has a write protect switch Setting this switch to PROTECT can prevent writing and deleting of data Note The write protect switch is not effective when the P2 card is inserted in the P2 drive Make sure you remove the P2 card from the P2 drive set the switch then re insert the card in order to effect the switch setting Setting the write Setting the write protect switch to protect switch to PROTECT can this side allows prevent writing and writing and deleting of data deleting of data Installation There are two ways to connect the P2 drive to a personal computer 1 Using the P2 drive as an external drive connected to a personal computer 2 Mounting the P2 drive in a 5 inch bay of a desktop personal computer lt Notes gt Connect the P2 drive to a personal computer before installing the P2 driver to the computer from the installation CD For details refer to the Installation Manual The P2 d
5. green when the P2 drive is running Status Indicator This indicator lights up in green during access to a P2 card lt Note gt Removing a P2 card during access may cause file corruption Card Slots The P2 drive s card slots are designed for P2 cards Proper operation cannot be guaranteed when used with any card other than P2 cards EJECT Button To remove a P2 card press this button so that the button pops out then press it in again Note For Windows 2000 only Open My Computer and use the right button of your mouse to select the drive from which you want to remove a card then select EJECT before operating the EJECT button 3 4 Rear Panel eco DCIN 16V DCIN 12V ee us 9 1 5 Qo o 3 The picture shows the rear panel with its cover removed 1 2 3 4 5 USB 2 0 connector Type B This connects a USB cable Use a USB cable shielded compliant with USB 2 0 lt Note gt The P2 drive supports USB 2 0 only It does not support personal computers compliant with USB 1 1 DC IN 16V Socket For external use of the P2 drive connect an AC adapter to this socket DC IN 12V Socket To use the P2 drive mounted in a personal computer connect one of the power supply connectors inside the personal computer to this socket Note Do NOT supply power to both the DC IN 12V socket and DC IN 16V socket at the same time Cabl
6. ing to host computer or peripheral devices Also any unauthorized changes or modifications to this equipment could void the user s authority to operate this device indicates safety information Overview The AJ PCD10 hereinafter referred to as P2 drive is a data transfer device that uses a USB 2 0 interface and is designed only for AJ P2C series memory cards hereinafter referred to as P2 card s The P2 drive enables high speed transfer to a personal computer of clip data shot with a P2 card camera recorder This device supports not only the transferring and copying of clips recorded on P2 cards but also direct editing Features The P2 drive features five card slots It enables high speed data transfer using a USB 2 0 interface It can be used as either an external or an internal drive Supplied Accessories AC adapter Power cable for AC adapter pm Ne LL rem Mounting screws 8 w For continental Rubber feet 4 Europe etc CD ROM P2 driver P2 card utility install manual and operation manual Operation Manual 2 this manual and the Installation Manual Oo Parts and their Functions Front Panel ieee lt a sr E z Us ET I i NS EUN m 1 1 2 3 4 2 Power Indicator This indicator lights up in
7. ndesired operation To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna ncrease the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help The user may find the booklet Something About Interference available from FCC local regional offices helpful FCC Warning To assure continued FCC emission limit compliance the user must use only shielded interface cables when connect
8. rive is designed for a 5 inch bay If all file bays are occupied you will need to remove one of the built in drives to make room for the P2 drive The P2 drive should be used in a personal computer whose design allows the front panel of the drive to be manipulated To Connect the P2 drive to a Personal Computer for External Use I Attach the rubber feet to the dimples on the base of the P2 drive Dimples 2 Start the personal computer 3 Plug the AC adapter supplied with the P2 drive into the DC IN 16 socket on the P2 drive The P2 drive will start Dil DEIN iev 4 Plug a USB 2 0 cable B connector into the USB connector on the P2 drive f ID oN iev a p USB 2 0 connector lt Note gt No USB 2 0 cable is supplied with the P2 drive in the package Use a commercially available USB 2 0 cable shielded Take care to use a USB cable that is no longer than 3 metres The P2 drive may not operate properly with a cable longer than 3 metres 5 Plug the other end A connector of the USB 2 0 cable into the USB 2 0 port on the personal computer 6 Verify that the personal computer recognises the P2 drive lt Notes gt e In Windows XP some card slots of the P2 drive may be assigned drive names that have already been assigned to existing networks Reassign network drive names if your personal computer does not
9. s of AC mains cable One is for continental Europe etc and the other one is only for U K Appropriate mains cable must be used in each local area since the other type of mains cable is not suitable FOR CONTINENTAL EUROPE ETC FOR U K ONLY Not to be used in the U K If the plug supplied is not suitable for your Socket outlet it should be cut off and appropriate one fitted FOR U K ONLY As the colours of the wires in the mains lead of this ap pliance may not correspond with the coloured markings This appliance is supplied with a moulded three pin identifying the terminals in your plug proceed as fol mains plug for your safety and convenience lows A 13 amp fuse is fitted in this plug The wire which is coloured GREEN AND YELLOW Should the fuse need to be replaced please ensure that must be connected to the terminal in the plug the replacement fuse has a rating of 13 amps and that which is marked with the letter E or by the Earth itis approved by ASTA or BSI to BS1362 symbol or coloured GREEN or GREEN AND Check for the ASTA mark or the BSI mark Q on the YELLOW body of the fuse The wire which is coloured BLUE must be con nected to the terminal in the plug which is marked If the plug contains a removable fuse cover you must with the letter N or coloured BLACK ensure that it is refitted when the fuse is replaced The wire which is coloured BROWN must be con If you lose the fuse cover the pl
10. stened securely in some types of personal computers If all 5 inch bays are occupied you will need to remove one of the built in drives to make room for the P2 drive The P2 drive should be used in a personal computer whose design allows the front panel of the Drive to be manipulated e In Windows XP some card slots of the P2 drive may be assigned drive names that have already been assigned to existing networks Reassign network drive names if your personal computer does not display all five card slots Specifications AC 100 V 240 V 0 8 A 0 4 A 50 60 Hz Card slots AC adapter input PC card Type Il x 5 DC 16V 0 8 A CardBus compliant when used with AC adapter DC 12V 1 0A Please note that specifications and appearance are subject to change for when mounted in a personal computer improvement purpose without notice indicates safety items External dimensions W x H x D 5 7 8 x 1 11 16 x 7 7 8 inches 148 4 x 42 5 x 199 0 mm excluding protruding parts Weight Approximately 2 64 Ibs approx 1 2 kg Environmental conditions Operating temperature 32 F to 104 F 0 C to 40 C Operating humidity 0 to 90 w o condensation Personal Computer System Requirements OS proper operation guaranteed Windows XP Professional SP1 or later Windows 2000 SP4 or later Main Memory 512 MB or greater recommended In
11. terface USB Ver 2 0 compliant 11 Panasonic PANASONIC BROADCAST amp TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office One Panasonic Way 4E 7 Secaucus NJ 07094 201 348 7000 EASTERN ZONE One Panasonic Way 4E 7 Secaucus NJ 07094 201 348 7621 Southeast Region 1225 Northbrook Parkway Ste 1 160 Suwanee GA 30024 770 338 6835 Central Region 1707 N Randall Road E1 C 1 Elgin IL 60123 847 468 5200 WESTERN ZONE 3330 Cahuenga Blvd W Los Angeles CA 90068 323 436 3500 Government Marketing Department 52 West Gude Drive Rockville MD 20850 301 738 3840 Broadcast PARTS INFORMATION amp ORDERING 9 00 a m 5 00 p m EST 800 334 4881 24 Hr Fax 800 334 4880 Emergency after hour parts orders 800 334 4881 TECHNICAL SUPPORT Emergency 24 Hour Service 800 222 0741 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario LAW 2T3 905 624 5010 Panasonic de Mexico S A de C V Av angel Urraza Num 1209 Col de Valle 03100 Mexico D F 52 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc San Gabriel Industrial Park 65th Infantry Ave Km 9 5 Carolina Puerto Rico 00630 787 750 4300 Panasonic Broadcast Europe Panasonic Marketing Europe GmbH Hagenauer Str 43 65203 Wiesbaden Biebrich Deutschland Tel 49 611 235 481 VQTOL23 E FO604TO
12. ug must not be used un nected to the terminal in the plug which is marked til a replacement cover is obtained with the letter L or coloured RED A replacement fuse cover can be purchased from your local Panasonic Dealer How to replace the fuse 1 Open the fuse compartment with a screwdriver IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET If a new plug is to be fitted please observe the wiring code as shown below If in any doubt please consult a qualified electrician WARNING THIS APPLIANCE MUST BE EARTHED IMPORTANT The wires in this mains lead are co loured in accordance with the following code Green and Yellow Earth Blue Neutral Brown Live CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended
Download Pdf Manuals
Related Search