Home

Scanner Utility for Microsoft Windows Version 9.6 User's Guide

1. Impr inter Endorser Gener ic Flip Side Rotation C Bock p P __ A Rotation Rotation Degree degree D Automatic Size and Skew detection Disable Figure Option dialog Rotation Flip Side Rotation E H e Book Fanfold Specifies the binding of the document when both sides are scanned using ADF Book Outputs the scanned image for both sides as 1s Select this option to scan documents bound on the left or right side Fanfold Outputs the scanned image of the backside rotated 180 degrees Select this option to scan documents bound on the top or bottom Front side and backside are printed conversely When scanning from the top to bottom for the printing direction of the document this setting outputs the image with the front and backsides printed in the same direction 61 Rotation Degree Rotation Degree na degree m Outputs the scanned image rotated to the right or left 90 degrees 0 0 degree Outputs the scanned image as is 90 0 degree Outputs the scanned image rotated 90 degrees to the right clockwise 90 0 degree Outputs the scanned image rotated 90 degrees to the left counterclockwise 180 0 degree Outputs the scanned image rotated 180 degrees top and bottom reversed Automatic Size and Skew detection Automatic Size and Skew detection Disable Disable This option outputs the image as it was scanned End of Page
2. 152 vi 1 Outline 1 1 Characteristics of this Driver This driver complies with TWAIN regulations V1 8 the latest version as of May 2000 which are global standards for image scanners The driver can be used in all TWAIN compliant applications This driver also supports an image scanner that has the double sided scan function If the application supports continuous scan a double sided document can be scanned 1 2 Operating Environment This driver can be used in the following systems SCSI connection IBM PC AT compatible machine recommended Intel Pentium 1 or higher on which one of the following operating systems are installed Microsoft Windows Millennium Edition Microsoft Windows 98 Microsoft Windows 2000 Microsoft Windows XP Adaptec SCSI adapter or Fujitsu FMV SCSI adapter n some cases the driver may not operate with the above systems Please check in advance with your place of purchase Notes are provided on the accepted SCSI adapters in README TXT which is included in the installation media Please read these notes before use This driver has the following hardware requirements RAM 32 MB or more a minimum of 64 MB is recommended Available hard disk space 10 MB or more excluding the area for storing images CD ROM drive required for installation Mouse recommended USB connection IBM PC AT compatible machine reco
3. D Enable Scanner Dial Enable Low Speed Feeding Enable Duplex Buttan 5 wm ed Enable SendTo Button Enable ADF Scanning Start Scan Button Document Detection 0 8 Figure Option dialog Start Up Power Mode Power Mode Quick Start Low Power Quick Start Mode This mode keeps the lamp on regardless the scanner s operating condition which saves times for lamp to become steady Low Power Mode To save the power consumption this mode turns the lamp off if the scanner is not operated for 14minutes Enable Low Speed Feeding Enable Low Speed Feeding This is to specify to obtain a high quality image This function reduces times of start stop during the scanning to obtain a smooth and high quality image 72 Scanner Operation Panel Enable Scanner Panel Enable Scanner Panel This is to specify whether the operator panel is enabled or not If this is checked button operation on the operator panel becomes effective Note that the operator panel is enabled only during the driver is activating Enable Scanner Dial Scanner Dial Enable Specifies whether the value indicated by the density dial on the scanner 1s reflected on scanning or not This setting is valid when both Enable Scanner Panel and this checkbox are checked With this density dial the density can be set by five levels If moving the density dial to
4. Name CPS gt Current Inno Stamp POET Help Basic dor Pasar Wrs gt Poe 2S Scanning Ara CUT Tan HOT net Show this dialog next open Figure Option dialog box simplified DTC Setting Files setting Files 00 Current Setting m The setting information of the scan conditions can be saved in a Setting file Scan condition settings that have been set in advance in this dialog can be selected from the list of setting files This enables selection of all settings at the same time without having to enter the scan conditions one at a time Press the button to open the list of setting files Subsequent scanning operations can be performed effectively by registering several types of scan conditions that are frequently used 88 FTS File Information Cro Alle information Name o Current Ine tarn gt POO T3338 asc PTS THEFT dar Fanar gt A4 Pea Area heft QUT sm The information of the setting file selected in Setting Files is displayed Show this dialog next open checkbox Show this dialog next If this checkbox is checked Basic Scan Dialog will be activated the next time the driver is activated OK button Makes the new setting valid
5. Ports COM amp LPT SCSI and RAID controllers x B Sound video and game controllers See Storage volumes m 6 Select the device name right click the device icon and select the Properties menu item from the pop up menu 38 10 The Properties dialog box is displayed Select the Driver tab folder and then click the Update Driver button The Update Device Driver Wizard dialog box is displayed Select Install from a list or specific location Advanced and click the Next button Hardware Update Wizard Welcome to the Hardware Update Wizard This wizard helps vou install software for fi 3340 Cdi 2 fe If your hardware came with an installation CD lt floppy disk insert it now What do you want the wizard to CO Install the software automatically Recommended Install from a list or specific location Advanced Click Next to continue Cancel Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start 15 defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen The following dialog box 15 displayed Select the Don t search
6. Select this option to scan a document whose background color is not white such as a newspaper Select Auto Enable or Disable When Enable is selected the document is scanned using background follow up for line drawings When Disable is selected the document is scanned using the standard basic white background for photographs When Auto is selected the option automatically switches to the optimal setting based on the specified Image Mode White Level Follower is used to adjust the density of the white background of a document and correct variations in the background color by compensating the pixels of scanned images individually Reverse Reverse This option specifies whether to reverse the black and white of a scanned image If this option is selected color data is reversed If this option is not selected the color values of the reproduced image corresponds to the original image Some applications do not permit normal operation If this occurs contact the manufacturer of the application 87 4 9 Setting the Setting Manager Options These options are used to manage the setting files and switch the basic scan dialog display Setting File Durrent Setting Config Press the Config button of the main dialog to open the Setting Manager dialog box shown below Lsontfiguration Setting Files no Current Setting Cio File information in Iz I2 tn
7. To start the search click Nest IF you are searching an a floppy disk or CD ROM drive Insert the floppy disk or CD before clicking Next Optional search locations Floppy disk drives CD ROM drives Specify a location Microsoft Windows Update 7 The following dialog box is displayed Found New Hardware Wizard E Insert the manufacturer s installation disk inta the drive pem selected and then click OF Cancel Copy manufacturer s files fram reerswinzk ud Browse From the screen displayed by the Browse button select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 41 10CU fi 41 10C M3091DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models Driver2 Others Win2k_ 20 8 Click the Next button and confirm that the following screen is displayed Click the Next button again Found New Hardware Wizard Driver Files Search Results The wizard has finished searching for driver for your hardware device The wizard found driver for the following device f 401 OCU Windows found a driver Far this device To install the driver Windows found click e diverwinek Sect int 9 When the file has been copied and the installation is completed the following screen is displayed Click the Finis
8. de net b sides 100 6 Definition of Scanner and Camera Properties 101 6 1 Displaying Scanner and Camera 101 62 General SP 101 3 ta tee aceite ee dices oe 102 s Diagnostic 103 6 5 Device Information Tab Folder esee 104 6 6 Device Setup Tab FOoldGt rite ostende nt eee do ocio ee aere 105 6 7 Version Information Tab 109 6 8 Color Management Tab 202 109 MOUNTS SIO OUI t 110 CS datos pude E 110 7 1 1 Messages from the TWAIN Driver 110 7 1 2 Error messages relating to gamma correction pattern editing 119 7 2 Device Trouble Related to 120 7 3 Device Trouble Related to Installation 121 APPEN sisina rE E 122 8 1 Relevant Image Scanner 122 o2 Malltenanee SCI VIC Crates lent a Pra abus dauid
9. 90 pages per minute 200 dpi A4 55 kg Double sided 90 pages per minute 200 dpi A4 55 kg 180 screens per minute single sided Synchronous Scanning gt 90 pages per minute 200 dpi A4 55 kg Double sided 60 pages per minute 200 dpi A4 55 kg 120 screens per minute Single sided Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled 256 levels 3 internal types can be downloaded simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 141 Imprinter With endorser option Reverse side minimum left margin printing position of 20 mm Maximum number of characters to be printed 30 characters Counter display range to 65535 at 5 digits display 0 to 16
10. ownload Gamma Pattern Selection File Ok Cancel i Add Delete When Download Pattern is selected the above dialog box opens Select the gamma pattern download file to be used from the list of file names Then press the OK button Correction will then be executed using the selected gamma pattern If the gamma pattern download file has not been registered in the list of file names use the Add button to register the file See Download Pattern File for information about how to specify the file Custom 22 When Custom is selected a custom specification be entered Entering an arbitrary value between 0 1 and 10 0 enables a gamma pattern corresponding to the entered value to be specified White Level Follower White Level Follower Auta Select this option to scan a document whose background color is not white such as a newspaper Select Auto Enable or Disable When Enable is selected the document is scanned using background follow up for line drawings When Disable is selected the document is scanned using the standard basic white background for photographs When Auto is selected the option automatically switches to the optimal setting based on the specified Image Mode White Level Follower is used to adjust the density of the white background of a document and correct variations in the background color by compensating the pixels of scanned
11. Automatic binary floating slice system De Screen Edge emphasis Reverse image SCSI II Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 149 Batch Detection Disabled Double feed detection Disabled Blank page skip Enabled only when ram cache 15 used 150 Product M3092DC 1 4210 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Interface Desktop Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADF simultaneous double sided reading Fluorescent tube White 600dpi FB 300 dpi ADF 50 dpi to 600 dpi at steps of Idpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 15 pages per minute 200 dpi A4 55 kg Double sided 7 5 pages per minute 200 dpi A4 55kg 215 scr
12. 4 CDROM 9 Disk drives Display adapters H Floppy disk controllers H Hard disk controllers El a Imaging Device Keyboard m Monitors gt Mouse Network adapters Other devices 7 Ports COM amp LPT amp SCSI controllers Ml System devices LLassaman mi main Properties Refresh Remove Print Er Ee E E 6 Select the device name right click the device icon and select the Properties menu item from the pop up menu 7 The Properties dialog box is displayed Select the Driver tab folder and then click the lower right Update Driver button 26 8 The Update Device Driver Wizard dialog box is displayed Click the Next button Update Device Driver Wizard 9 Select Display a list of all the drivers in a specific location so you can select the driver you want and click the Next button Update Device Driver Wizard 10 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start 1s defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 27 11 The following dialog box is displayed Click the Have Disk button and then
13. Image processing function fi 4750L Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF simultaneous double sided reading Long page scanning 297mm x 1387mm Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of Idpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 0 9 sec or less 200 dpi A4 Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55kg 2100 screens per minute Maximum 250 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse image With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 137
14. Once you deleted the inf file the WIA compliant device driver cannot be used until you restore the inf file by following the procedure below How to restore inf file 1 2 Connect the scanner and activate WindowsXP Delete Fujitsu M3091DCd Fujitsu M3092DCd M3091DCd or M3092DCd listed in imaging devices or Other devices of device manager 3 Insert Scanner Utility for Microsoft Windows CD ROM into the CD drive Double click on FtRstInf exe file in infTool folder to execute TT FtRsztInf exe 4 The following message appears Select Yes Scanner inf restore tool 2 Click Yes button to restore INF File complienk with Otherwise please click button 5 The following message indicating that the procedure has completed appears Select OK to terminate the procedure Scanner inf restore tool The processing is done The File is restored 6 Restart WindowsXP It automatically recognizes the scanner and installs the WIA compliant device driver 3 2 Installing the Mini Driver 3 2 1 Installing for the first time For Windows 98 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it 15 connected after activat
15. closes this dialog box and returns to the main dialog Add button Add Adds the setting of the current driver to a setting file File addition Description Configuration t far Document Filename config Cancel Pressing the Add button opens the File addition dialog Enter the Description and Filename as shown in the example above Then press the OK button to add the new setting file To cancel press the Cancel button 89 Description Enter character string to be displayed in the selection frame of the Setting Files Filename Specify the name of the file used to save the settings Delete button Delete Deletes unnecessary setting files Select the setting file to be deleted and then press the Delete button A confirmation dialog will be displayed Press the OK button to delete the setting file To cancel press the Cancel button Help button Help Displays online help 90 4 10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning The detailed setting functions of the main dialog have been omitted Scanning can be easily performed by selecting a registered setting file The basic scan dialog is also useful for avoiding incorrect operations when standard work is performed By checking the Show this dialog next open checkbox of the Setting Manager dialog the basic scan dialog box will be opened i
16. other side Cause An attempt was made to remove a file using the dither pattern or gamma download pattern file setting dialog However the file 15 being used for the other side front side if back side or back side if front side User response Before removing the file change the setting of the other side and then remove e The initial value data file contains an invalid value The standard value is set Cause A value outside the specified range or invalid text was found in the initia value data file the specific item involved is indicated by EntryzXXXXX If the file has been modified the setting value for the item may be wrong If the file has not been rewritten the file may have been damaged User response The value is set to a standard value Be sure to check the hard disk chkdsk scandsk and check for computer viruses regularly e The value is higher than the maximum scanning size Either the resolution value or the scanning area has to be reduced Cause A value exceeding the data capacity of the scanner was specified As the resolution is increased the amount of data to be scanned also increases User response Decrease the resolution or reduce the size of the scan area 110 The value for custom paper is higher than the maximum scan size Width needs to equal 279 mm or less and length needs to equal 420 mm or less The value for custom paper is higher than the maximum scan size Width needs to equal 11 inch or
17. recommended Display a list of the known drivers for this device so that can choose a specific driver Cancel 10 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start 15 defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 35 11 The following dialog box 15 displayed Click the Have Disk button then click the Browse R button Upgrade Device Driver Wizard Select a Device Driver e Which driver do want to install for this device s Select the manufacturer and model of your hardware device and then click Nest IF you have a disk that contains the driver you want to install click Have Disk Models fi 4010CU 4 0 dim H 4 500 dir f 4 dm 4 50Cdm 30910 il MANS Cd Have Disk Cancel 12 In the dialog box that is displayed select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 41 10CU fi 41 10C M3091 DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models Driver2 Others Win2k_ XP 13 A list
18. this option is selected in order to scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet If this option is selected the document is scanned in the front to back to front to back order Paper feeding method that is to be supported varies with the type of scanner See Relevant Image Scanner Specification in the Appendix ADF Back Side Reads the document on the device s automatic document feeder ADF Here only back side is read Note To specify duplex scanning the number of copies designated should be based on the number of pages not the number of paper sheets In other words one original with a front and back is regarded as two pages Image Mode Image Mode Black amp White Selects an image mode for scanning the image Select a corresponding image mode from the list Black amp White Scans data by using the fixed threshold binary black and white Distinguishes black from white by the setting in the Threshold of Scanning Parameter This scanning mode is suitable for scanning line drawings and text documents Halftone Dither Scans data using the halftone processing with dithering or error diffusion Uses the patterns set in Halftone to simulate data in black and white Selection of built in dithered patterns or error diffusion not supported by some device models is allowed This scanning mode 15 suitable for scanning images containing light and shadow
19. turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows Note The user must log in with administrator authority For information on logging in with the proper authority contact the system administrator 3 If the scanner has been detected normally the following dialog box appears Found New Hardware Wizard E Welcome to the Found New Hardware Wizard This wizard helps you install a device driver for a hardware device continue click Cancel For some models the above dialog box may not be displayed because an appropriate driver has been automatically installed as part of the operating system If this happens update the driver For more information see Section 3 2 4 Updating the driver 18 4 Confirm that Search for a suitable driver for my device recommended has been selected and click the Next button Found New Hardware Wizard Install Hardware Device Drivers at device driver is a software program that enables a hardware device to
20. your question immediately To help us in our effort to provide you with the best maintenance service possible we ask you to kindly write down the following items as many as possible e Serial number version and date etc of this product e Name and product number of the image scanner being used e The options installed on the image scanner being used e Manufacturer product name and type number of the computer being used e Manufacturer and version of the Windows OS whether Windows has been updated e Name and version of the display driver e Name and version of the printer driver e Resolution 1024 x 768 number of colors and number of dots or points of the screen e Product name of the SCSI adapter and name and version of the SCSI driver in case of the SCSI connection e Error occurrence processing the simpler the processing the easier it is to determine the cause Also we would appreciate it very much if you could kindly verify the following items prior to receiving our mantenance service e Is the power turned on e sthecable connected correctly e Is the correct image scanner driver selected 152 153 TWAIN Scanner Driver Utility Scanner Utility for Microsoft Windows Users Guide 32 bit version First Edition October 2001 2nd Edition December 2001 3rd Edition December 2001 All Rights Reserved Copyright PFU LIMITED 2001 The contents of this document may change for improvement
21. 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 96 5 Using the Gamma Pattern Editor 5 1 Start up Click on Start and select Download Pattern Editor from Scanner Utility for Microsoft Windows under Programs The following menu is displayed Pid Gamma Pattern Editor Sooty Figure Gamma Pattern Editor Tool start up menu 97 5 2 File menu Pid Gamma Patte Save Save Close Load This menu is used to read the Gamma Download file and display the graph and gradations The name of the open file is displayed above the graph area Save The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area If no filename is displayed the pattern 1s named and saved in that file Save As The gamma pattern currently being edited is named and
22. B6 Landscape Letter Legal US Executive Visiting card Specified one location Disabled 256 steps Internal types are not available cannot be downloaded At custom specification entering a value enables to set a pattern Reverse image Moir removal USB 1 1 Disabled Disabled Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 145 Scanner and Camera Properties Event functions Disabled Device Setup Only Clear function of Page counter is enabled 146 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Interface fi 4110CU Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Fluorescent tube White 600 dpi 50 dpi to 600 dpi at steps of 1dp1 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded
23. Detection Scanning with the ADF and page length detection selected will output data for the page size detected The image data output will adjust to the page length detected for each page including smaller size pages Data cannot be output for page sizes greater than the length setup in Page Size This function does not work properly for some applications Automatic Deskew When scanning with the ADF this option detects skew of the document being fed and automatically corrects the skew Automatic Page Size Detection Scanning with the ADF and Automatic Page Size Detection selected the output will adjust to the page size detected Document skew can be detected and can be corrected for the output image Output data size will be equal to each document scanned in a multi page scan When page size is detected incorrectly set up the Page size to the largest size page in the set For example With Automatic Page Size Detection is selected it also need to select a Paper Size example Double Letter 11 x17 in the set If any paper size within the 62 selected Double Letter paper size range is used for scanning the output will adjust to the page size detected However some detection cannot be corrected for example an unfixed long image folded corner document has uneven width for the length of the page This function becomes effective only when scanning with the ADF It may detect incorrectly when this function is chose
24. Driver2 When the CD drive is setting in D 2 In case of other models Driver2 Others Win2k_ 13 A list of different models is displayed Select the appropriate device click the Next button Select the same device name as the name selected procedure 6 14 The following dialog box is displayed Click the Continue Anyway button Installation starts Hardware Installation The oftware you are installing For this hardware F A340 dij has not passed Windows Logo testing to verfu its compatibility with Windows XP T ell me why this testing iz important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing STOP Installation 40 15 When the file has copied and installation is completed the following dialog box is displayed Click the Finish button Hardware Update Wizard Completing the Hardware Update Wizard The wizard has finished installing the software for F A34 0C dij The hardware you installed will not work until pau restart Your computer Click Finish to close the wizard Finish Cancel 17 Restart the system by following the instructions on the screen 18 Go to the section 3 3 Installing TWAIN Data So
25. M3097DG Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Simultaneous double sided reading Xe discharge tube Green 400 dpi Standard 600 400 300 240 200 150 100 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 1 3 seconds or less A4 200 dpi Single sided 36 pages per minute 200 dpi A4 55 kg Double sided 30 pages per minute 200 dpi 4 55 kg 60 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape Double Letter Letter Letter landscape Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal SCSI II Enabled Automatic Size and Skew detection End of Page Detection Blank page skip Enabled only when ram cache is used This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in
26. cache is used Use of this scanner may require installation of the optional image compression option board CMP 2 in the scanner device This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 126 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Batch Detection Blank page skip M3097G Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Fluorescent tube Green 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 1 600 dpi at steps of 1 8 bit 256 levels Enabled 8 bits Some release version of scanner do not support gray scale output format Dither matrix can be downloaded Error diffusion 1 3 sec or less A4 200 dpi 3 7 sec or less A3 400 dpi 36 pages minute 200 dpi A4 55 kg Maximum 100 sheets ream weight 55 kg A
27. click the Browse R button Update Device Driver Wizard 7 Select the manufacturer and model of your hardware device If you have a disk that contains the updated driver click Have Disk To install the updated driver click Finish Fl4 50Cdijm Fl4 750Cdim MANJOLA gi Show compatible hardware Have Disk Show all hardware i Cancel 12 In the dialog box that 1s displayed select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 4110CU fi 41 10C M3091DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models D MDriver2NOthersNwin98 Me 13 A list of different models is displayed Select the appropriate device name and click the Next button Select the same device name as the name selected in procedure 6 14 The following dialog box is displayed Click the Next button Installation starts Windows driver file search for the device fi 4110CUd Windows is now ready to install the selected driver for this device Click Back to select a different driver or click Next to continue Location of driver NS EDRIVERNSWINS8 ME FJSCMUSD INF In some cases the message Please insert the disk labeled Windows98 CD ROM and then click OK is displayed If this OK button is clicked the message file usbscan sys or scsimap sys on the
28. deoa eunt 4 NERO 5 NER MT TS 5 2 8 LDNVPUINAADDIICGUO fL er nE dated 6 3 s YE RS RV VERE Cc E ER 7 Sell Al TEENS 7 3 2 Installing the MIAT DIVE Kenasi a 10 3 2 1 Installing for the first time For 798 240 10 3 2 2 Installing for the first time For Windows Me 14 3 2 3 Installing for the first time For Windows 72000 18 3 2 4 Installing for the first time For 0 23 3 2 5 Updating the driver for 99 84 26 3 2 6 Updating the driver for Windows Me 30 3 2 7 Updating the driver for Windows 2000 34 3 2 8 Updating the driver for Windows XP 38 Installing TWAIN Data 004044 nnne nnn 42 cot east aetates humi 43 3 5 When the scanner is not detected automatically Supplementation 44 Using Ine DIVEN sui noc aded Tu DUE qw ai 45 Al Selectnga thie DrIIVelusaasiatedesisao t tire 45 42 SClESM oot 46 4 3 Displaying Driver 0 00 47 4 4 Setting Informa
29. higher the highlight value the lighter the image Any levels on the document outside these settings are flooded all or 255 while the interval between the shadow and highlight settings are equally divided into 255 levels which are used to create the output images This means that if the shadow and highlight settings are close to each other the contrast for that interval in the scanned document will be very strong but with all other areas maximizing high or low 84 Contrast Brightness Contrast i Brightness Contrast Sets the contrast of light and shadow in a scanned image Specify the contrast with a number in the range of 1 low soft to 255 high sharp If this value 15 increased the dark part of the image is shown darker and the light part is shown lighter Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Brightness Sets the brightness of the overall image Specify the brightness with a number in the range of bright to 255 dark To brighten the overall image decrease the value of the setting To darken the overall image increase the value This option corrects distortions from nonlinear image representation Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document However most output terminals do not produce output that has the desired linear relation to the input and the result
30. images individually For ordinary use set White Level Follower to off Use of White Level Follower often increases the background noise because IPC 3 3D is very sensitive This option is not available if Gray Scale is selected for Image Mode In addition some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix 77 Dropout Color Dropout Calor Panel setting This option enables scanning excluding the selected color information of green red or blue the three primary colors of light For example to scan black characters framed in red selecting red for scanning will scan only the black characters Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Reverse Reverse This option specifies whether to reverse the black and white of a scanned image If this option is selected black and white are reversed by reversing the black and white pixels If this option is not selected the black and white values of the reproduced image corresponds to the original image Some applications do not permit normal operation If this occurs contact the manufacturer of the application 78 4 8 2 Image Filter Advance tFrant Black amp White Static Threshold Color Gray Image Filter Cancel Help Edee Processing None C Emphasis High Edge Extract Emphasis Mid Smooth ine W
31. irregularity in the image is undesirable for Image This mode is for image scanning applications that scan images without prior smoothing The specification changes the specifiable items and members for Threshold Curve and Gamma Curve The selection screens for for OCR and for Image are not displayed if IPC 3 3D and IPC 4D are installed 81 Threshold Curve Threshold Curve TD EN Normal Light Dark Light This option specifies the relationship between the threshold value and the maximum density The specification method depends on the Scan mode setting In for OCR mode use the scroll bar to set the inclination and density level between and 5 Click the arrow of the scroll bar or drag the scroll marker to the desired setting position The current setting 15 displayed in the center figure on the left In for Image mode select Normal or Light figure on the right If IPC 3 3D and IPC 4D have been installed there is no difference between for OCR and for Image The scroll bar is used to set the inclination and density level between O and 7 The figure on the right 1s not displayed Gamma Curve Gamma Curve 1 E This option specifies the gamma correction curve pattern The available choices depend on the Scan mode setting In for OCR mode select OCR1 or OCR2 In for Image mode select Dark Image or Even For IPC 3 3D and IPC 4D the gamma c
32. less and length needs to equal 16 53 inch or less The value for custom paper is higher than the maximum scan size Width needs to equal xxx pixelor less and length needs to equal xxx pixel or less Cause A value exceeding the limit applicable to the scan area of the scanner was specified User response To specify a custom paper size specify the value that is smaller than the value applicable to the device The value for custom paper is greater than the maximum scan size Width need to less equal 259mm The value for custom paper is greater than the maximum scan size Width need to less equal 10 24inch The value for custom paper is greater than the maximum scan size Width need to less equal 2048pixel Cause A value exceeding the limit applicable to the scan area of the scanner was specified User response To specify a custom paper size specify the value that is smaller than 260mm 10 24inch 2048pixcel The resolution must be less or equal to xxx dpi when scanning in Gray Scale The resolution must be less or equal to xxxdpi when scanning in Color Cannot specify Long Page Scan Width need to less equal 400dpi Cause There is a limit on the resolution when gray scale scanning long page scanning or color scanning is used User response Specify a resolution value that is below the indicated xxx dpi Cannot specify Gray Scale with Custom resolution Cannot specify Color with Custom resolution Cause Custom resolut
33. of the month HH The hour is printed using two digits of the 24 hour clock for example 08 for 8 00 a m and 14 for 2 00 p m The hour is printed using two digits of the 24 hour clock for example 8 for 8 00 a m and 14 for 2 00 p m The minute is printed using two digits for example 02 for 8 02 a m and 48 for 2 48 p m JON The minute is printed using one or two digits for example 2 for 8 02 a m and 48 for 2 48 p m Nud counter value is printed by digits which increases or decreases with each page Programmable digits of the counter is 5 and 8 and described as 05ud and O8ud respectively See the Relevant Image Scanner Specification described in the Appendix since the programmable digits depend on the device The initial counter and the methods of increasing and decreasing values can be specified as explained above under the heading Counter This specification 1s only permitted at the end of an Imprinter String Endorser Sample 2001 03 08 22 42 00000 Displays printed examples of the Imprinter String Endorser designated above 70 Note The printed counter date and time do not always look like the sample because the scanning option takes precedence 71 4 7 5 Start Up Rotation Job Cache Generic Startup Power Quick Start scanner Operation Panel Enable Scanner Panel C Low Power
34. of the related hardware and software and TWAIN was established as a result The user may now choose among all the input devices and software driver or application programs conforming to the TWAIN standard and configure a most suitable system for himself without being restricted to the products of a certain series or a certain manufacturer 2 2 TWAIN Application TWAIN mainly applies to the following three software components 0 Application software Source manager Source The components are related to each other as shown below Application software photo retouching software etc Source manager TWAIN DLL TWAIN_32 DLL etc Source Image scanner control of the driver etc Image scanner etc Figure TWAIN Application 3 Installation 3 1 Preparation 1 Make sure that the operating system 15 installed correctly 2 Incase of the SCSI connection confirm that the SCSI adapter 15 connected to the computer mainframe and operating correctly In case of the USB connection confirm that the USB port is installed in the computer 3 Confirm that the hard disk that is the installation destination has enough free space 4 Turn off the personal computer Note This driver must be installed by taking two steps in the following sequence 1 Installation of Mini Driver Section 3 2 2 Installation of Data Source Section 3 3 Be sure to install in this sequence If either of these two installations is not com
35. saved in that file The saved filename 15 then displayed above the graph area Close Select this to exit the editing program 98 5 3 Help menu Gamma Pattern Editor Fille About 255 About Information related to this editor and its version number is displayed 99 5 4 Gamma Pattern Editing Graph Area The graph area is 256 dot x 256 dot white square area bordered by black lines where the relationship between the input values of O to 255 x axis and output values of 0 to 255 y axis is indicated in blue lines Each graph dot represents one division unit Gradation The input is displayed in black and white in 256 single dot steps from 0 at the left border to 255 at the right border The gamma function of the scanner is displayed After saving it the displayed gray scale gamma function is fixed and constant The output values are displayed in single dots in relation to the input values and the brightness of the output equipment is displayed To ensure accurate display the display must be set for True Color or greater Gamma Calculation of the output values is based on the value entered in the edit box the graph and the gradation are then displayed The values that can be input are integers greater than 0 or fractions lt lt Formula gt gt Output input 255 x 255 Input 0 255 Free Edit Designates whether to enable editing of the graph area directly using the mo
36. scanning and fine binary processing for documents whose backgrounds are other than white such as newspapers Some scanner models do not support this option See Image Scanner Specification in Appendix Halftone Halftane Dither Pattern D Select the halftone pattern for halftone scanning from the built in pattern list Select the desired halftone pattern for displaying the obtained image This setting is effective when Halftone or Automatic Separation 1s selected in Image Mode Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Dither Pattern 0 Executes pattern processing that is suitable for scanning a dark photograph Dither Pattern 1 Executes pattern processing that 1s suitable for scanning a dark colored document containing both text and photographs Dither Pattern 2 Executes pattern processing that is suitable for scanning a light photograph Dither Pattern 3 Executes pattern processing that 1s suitable for scanning a light colored document containing both text and photographs 54 Download Pattern Executes processing using the dithered download pattern specified in the dithered download file described later Some scanner models do not support this function See Image Scanner Specification in Appendix Error Diffusion Error Diffusion minimizes the difference between the pixel density of the scanned image and the pixel density of the pri
37. such as a photograph Gray scale Scans data using 256 level monochrome gray scale Light and shade in photographs can be represented with greater fidelity This scanning mode employs far more memory than the Black amp White mode Some versions of the scanner do not support this scanning mode For details contact the retail store where the device was purchased 52 Automatic separation Scans data distinguishing line drawing from photograph image If this option is selected the line drawing part is scanned using Black amp White and the photograph part is scanned using Halftone This information is most suitable for documents containing both photographs and line drawings or text Some scanner models do not support this option See Relevant Image Scanner Specification 1 the Appendix SEE Selectable edge enhancement Scans data using the halftone processing and emphasizes line drawings and text This option is most suitable for emphasizing only text of documents containing both photographs and text Some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix 24 bit Color Scans with 24bit 16777216 colors color This option is most suitable for scanning color images such as color photographs It employs more memory than the gray scale Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix 256 colors Scans da
38. the initial value file Reset Reset Restores the current setting values to the status immediately after the window 15 opened 57 Help Help Displays online help When the 1 key is pressed help information regarding the item on which the cursor 1s placed is displayed Note Depending on the application used help information may not be displayable with the F1 key This 1s because the driver operation is controlled through the application and the F1 key may be used differently in each application program Help information can be displayed by pressing the F1 key while holding down the Ctrl or Shift key Option Option Displays the option dialog for setting device specific functions See Section 4 7 Setting Option described later Advance Advance Displays the advance dialog for settings related to color variance and image processing Config Conti Displays the basic scan dialog for managing the settings file and for setting simple scan dialog switching About About Express the version of this driver by clicking this button 58 4 6 Setting Scanning Area Specify the scanning area in the preview window as follows Setting 1 Press the left mouse button to specify the origin top left corner of the scanning area The cursor appears as a 2 Drag the mouse to show the outline of the scanning area As the cursor mov
39. work with Sy an operating system This wizard will complete the installation for this device y 4010 0 device driver is a software program that makes hardware device work Windows needs driver files for your new device To locate driver files and complete the Installation click What do vau want the wizard to Search for a suitable driver for my device recommended Display a list of the known drivers for this device so that can choose a specific driver 5 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start is defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 19 6 The following screen is displayed Deselect the Floppy disk drives and CD ROM drive check boxes and instead select the Specify a location check box Then click the Next button Found New Hardware Wizard Locate Driver Files Where do you want Windows to search Far driver files Search for driver files for the following hardware device y fi 4010CU The wizard searches for suitable drivers in its driver database on your computer and in any of the following optional search locations that you specify
40. 1 Go to the section 3 3 Installing TWAIN Data Source and follow the procedure 25 3 2 5 Updating the driver for 98 If a driver of previous version has been installed the latest driver for the system may not be installed by the procedure given in Section 3 2 1 If this occurs update the driver by following the procedure below 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows 3 Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel The System Properties dialog box is displayed Click the Device Manager tab The following device manager window opens and the device name is displayed under Imaging devices In some cases it is displayed under Other devices Ug System Properties RIES General Device Manager Hardware Profiles Performance View devices by type View devices by connection m Computer
41. 1 Y2 coordinates pattern value for the Xn Ym 2 coordinates pattern value for the Xn Ym 1 coordinates pattern value for the Xn Ym coordinates Meaning of each element Note n size in the X direction indicates the size of the matrix in the X direction Specify 8 for the scanner supported by this driver m size in the Y direction indicates the size of the matrix in the Y direction Specify 8 for the scanner supported by this driver Pattern value for the Xx Y y coordinates contains a values in the range of 0 bright to 255 dark that specifies the brightness of the X coordinate x and the Y coordinate y Use a delimiter other than a number to delimit elements For most cases use a comma 93 Example 8 8 128 128 128 128 128 128 128 128 255 128 128 128 128 128 128 128 255 255 128 128 128 128 128 128 255 255 255 128 128 128 128 128 255 255 255 255 128 128 128 128 255 255 255 255 255 128 128 128 255 2595 2995 259 259 2335 128 126 255 255 253 255 253 255 235 128 94 Gamma download pattern file Any user defined gamma correction processing can be performed by downloading the pattern from the gamma download file to the scanner The defined pattern becomes effective when Download Pattern 15 sele cted for Gamma Pattern Some models do not support this file See Relevant Image Scanner Specification in Appendix Although the standar
42. 4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse image With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 133 Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range to 65535 at 5 digits display 0 to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II Batch Detection Enabled Double feed detection Enabled Long page scanning Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Blank page skip Enabled only when ram cache is used 0 specified as the endorser print position printing will begin 42 mm from the edge of the page 134 Product M4097D f1 4750 Type Image sens
43. 4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded simplified Dynamic Threshold SDTC Image processing option installed Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal Enabled Enabled only when ram cache is used Use of this scanner may require installation of the optional image compression board CMP 2 This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 127 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Cutout specification Background compensation Contrast setting Gamma pattern Image processing function Interface Batch Detection
44. 777215 at 8 digits display There 1s partly limitations by the revision of the scanner device Direction Printing Top to Bottom Interface SCSI II Online offset adjustment Enabled Batch Detection Enabled Automatic skew compensation Enabled Drop out Enabled Double feed detection Enabled Buffer scan cache using scanner memory function Enabled Blank page skip Enabled only when ram cache is used 0 specified as the endorser print position printing will begin 20 mm from the edge of the page 142 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns ADF scanning speed ADF stacker capacity Document size Supported regular paper Cutout specification Background compensation Contrast setting Gamma pattern Image processing function Imprinter Endorser fi 4990C Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Long page scanning 297mmx878mm Fluorescent tube White 400 dpi Monochrome 400 300 240 200 150 100dp1 Color 400 300 200 150 100dpi 10 bit 1024 levels Enabled Dither matrix Error diffusion Monochrome Asynchronous Scanning Single sided 90 pages per minute 200 dpi A4 55 kg Double sided 90 pages per minute 200 dpi A4 55 kg 180 screens per min
45. Error diffusion Enabled B W Singk sided 15 pages per minute 200 dpi A4 55 kg Double sided 7 5 pages per minute 200 dpi 4 55kg 15 screens per minute Color Single sided 5 pages per minute 150 dpi A4 55 kg Double sided 2 5 pages per minute 150 dpi A4 55kg 5 screens per minute Maximum 50 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Minimum 52mm x 74 mm Maximum 216 mm x 356 mm 4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Visiting card Specified one location Disabled 256 steps Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Automatic binary floating slice system Moir removal Edge emphasis Reverse image USB 1 1 Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 147 Job control Disabled Double feed detection Disabled lt Other functions gt Power saving setting Enabled Low speed feeding setting Enabled Scanner panel setting Enabled Page counter clear Enabled 2 types Detail setting Enabled Only for the ADF Magnification adjustment and th
46. I will choose the driver to install and then click the Next button Hardware Update Wizard Please choose your search and installation options CO Search for the best driver in these locations Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver Found will be installed Search removable media floppy CO ROM Include this location in the search 5 38 5 07 102 Browse Don t search will choose the driver to install Choose this option to select the device driver fram a list Windows does not guarantee that the driver you choose will be the best match for your hardware Cancel 39 11 The following dialog box 15 displayed Click the Have Disk and then click the Browse button Hardware Update Wizard Select the device driver you want to install for this hardware Select the manufacturer and model of your hardware device and then click Next IF you have a disk that contains the driver you want to install click Have Disk Show compatible hardware Model fi 4340C dij A This driver is not digitally signed Tell me why driver signing is important j Cancel 12 In the dialog box that 1s displayed select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 4110CU fi 41 10C M3091 DC fi 4210C M3092DC fi 4990C D
47. Imprinter With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range to 65535 at 5 digits display 0 to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II Double feed detection Enabled Double feed detection Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Blank page skip Enabled only when ram cache is used 0 specified as the endorser print position printing will begin 42 mm from the edge of the page 138 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Isolation specification Background compensation Contrast setting Gamma pattern fi 4750C Desktop LED RGB Reduced optical system Document fixed Flat bed Automatic Document Feed ADF simultaneous double sided reading Long page scanning 297mmx1387mm LED R G B Horizontal scanning 400 dpi Vertical scanning 800 700 600 500 400 300 240 200 150 100 dpi Standard 50 dpi to 800 dpi at steps of 14 10 bit 1024 levels Enabled 8 bits Dither
48. OM and click the OK button 11 1 In case of model f1 4340C fi 4010CU fi 4110CU fi 4110C M3091DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models D Driver2 Others win98_ Me 8 Click the Next button and confirm that the following screen is displayed Click the Next button again Add New Hardware Wizard In some cases the message Please insert the disk labeled Windows98 CD ROM and then click OK is displayed If this OK button 1s clicked the message usbscan sys or scsimap sys on the Windows 98 CD ROM cannot be found may be displayed In this case insert your Windows 98 CD ROM into the CD ROM drive click OK button A necessary file is installed 9 When installation 15 completed the following screen is displayed Click the Finish button Add New Hardware Wizard 12 10 Restart the system by following the instructions on the screen 11 Do the following to check whether the driver has been properly installed lt Device Manager gt Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel Then select the Device Manager tab folder in the system properties dialog box The device to be used is displayed under imaging devices As the model name a number following the letter may be displayed case of connecting some scanner m
49. P3PC E892 03EN Scanner Utility for Microsoft Windows Version 9 6 User s Guide For Use with Microsoft Windows 98 Windows Me Windows 2000 and Windows XP FUJITSU Introduction Thank you for purchasing the Scanner Utility for Microsoft Windows V9 6 This software contains TWAIN compliant image scanner driver simply called driver in this guide and utilities This guide provides a description summary of the driver as well as a description of the installation method and procedures for appropriate use Please read this guide before starting to use the software In addition read the README TXT file on the CD ROM for the latest information not included in this manual In this guide product names are abbreviated as follows e Microsoft Windows 95 operating system Windows 95 e Microsoft Windows NT Workstation operating system Version 4 0 and Microsoft Windows NT Server operating system Version 4 0 Windows NT 4 0 e Microsoft Windows 98 operating system Windows 98 e Microsoft Windows 2000 Professional Windows 2000 e Microsoft Windows Millennium Edition Windows Me e Microsoft Windows XP Windows XP When Windows 95 Windows 98 Windows NT 4 0 Windows Me Windows 2000 and Windows XP are referred to collectively they are simply referred to as Windows Unless otherwise indicated explanations refer to Windows 95 Win
50. Paper Size detection Enable Black White background switching Enable Drop out Enabled Double feed detection Enabled Buffer scan cache using scanner memory function Enabled Blank page skip Enabled only when scanner memory is used 144 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Interface Job control Double feed detection fi 4010CU Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Single sided reading Fluorescent tube White 600 dpi 50 dpi to 600 dpi at steps of 1dp1 8 bit 256 levels Enabled 8 bits Dither matrix 1 pattern Enabled Monochrome 8 sec or less 4 200 Color 10sec or less 4 150dpi Monochrome Single sided 10 pages per minute 200 dpi A4 55 kg Color Single sided 3 3 pages per minute 150 dpi 4 55kg Maximum 25 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Flat bed Maximum 210 mm x 297 mm ADF Minimum 114mm x 140 mm Maximum 216 mm x 355 mm 4 A5 A5 Landscape A6 A6 Landscape B5 B6
51. Windows 98 CD ROM cannot be found may be displayed In this case insert your Windows 98 CD ROM into the CD ROM drive click OK button A necessary file is installed 28 15 When the file has copied and installation is completed the following dialog box is displayed Click the Finish button Update Device Driver Wizard 16 Restart the system by following the instructions on the screen 17 Go to section 3 3 Installing TWAIN Data Source and follow the procedure 29 3 2 6 Updating the driver for Windows Me If a driver of previous version has been installed the latest driver for the system may not be installed by the procedure given in Section 3 2 2 If this occurs update the driver by following the procedure below 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows 3 Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel The Sys
52. a double sided original Counter Counter Counter Increment Decrement Designates whether to increase or decrease the specified step value Imprinter String Endorser String XHHANN A bud Specifies the imprinter string The following characters can be outputted by the Imprinter Alphabet Letters A Z a Z Numeric Characters 0 1 9 Symbols PHE lt gt _ 1 Other Space The space is ignored when it is entered at the head of String 69 The following definitions can be used They may also be selected from the menu which 15 displayed by clicking on 24 YYYY The year is printed four digits using the Western calendar The year is printed using the two digits of the Japanese calendar current or Heisei era YY year is printed in the last two digits of the Western calendar An English abbreviation of the month is printed for example JAN for January and FEB for February MM month is printed in two digits for example 01 for January and 12 for December The month is printed using one or two digits for example for January and 12 for December DD day is printed using two digits for example 03 for the 3rd day of the month and 26 for the 26th day of the month D The day is printed using one or two digits for example 3 for the 3rd day of the month and 26 for the 26th day
53. a program error that usually occurs during internal message transfer This message involves the sub messages described later Contact the retail store where the product was purchased or the nearest service center A general fault of the XXXXX response internally Cause User response This is a program error that usually occurs during internal data transfer This message involves the sub messages described later Contact the retail store where the product was purchased or the nearest maintenance service center 117 A general fault of the MSG SET and unsupported type response Internally Cause This is a program error that usually occurs while making the internal data settings User response Contact the place of purchase or your nearest maintenance and service center An undefined error occurred Processing cannot be continued because of insufficient memory The data source cannot be found The driver is connected to a maximum number of applications supported An operation error occurred An invalid function 15 specified Unpermitted combination of MSG DG DAT An invalid value is specified An invalid procedure of DG DAT MSG is specified Cause These sub messages are added to the error messages General MSG XXXXX response violation internal and General DAT XXXXX violation internal These sub messages indicate details about the programming errors that occur during message and d
54. age scanner is being used Cause User response The image scanner may be already in use by another application or the TWAIN driver may have been started twice User response After all applications are terminated restart the image scanner for scanning An input output error occurred in the image scanner Cause User response A fault occurred during the scan operation of the image scanner There may be a fault in the image scanner itself Turn off the power of all devices then turn on the power of the computer before turning on the scanner and retry scanning If the error still occurs contact the retail store where the image scanner was purchased or the nearest service center 113 Paper jammed in the ADF Cause A paper jam occurred the device User response Turn off the power of the device then remove the paper from inside the device Removing the paper by using excessive force will result in device failure so be careful The hopper tray is open Remsert the document and close the tray Cause The document tray 15 open User response For double sided scan close the document tray No paper in the ADF Cause Although ADF was selected as the paper feeding method no paper 1s found in the document tray User response Select another paper feeding method or set the document in the document tray The hopper tray is open or No paper in the ADF Cause The hopper tray cover is open or there is no p
55. ain after scanning xxx pages check Warns again after scanning xxx pages 2 If the scanning is continued click Ignore and close the message If the scanning is stopped click Cancel and close the message Replace consumables as soon as possible or when this message appears next time 4 After the replacement click Clear of Device Setup under Page Counter to reset the consumables counter If This message not display again is checked this message will not appear before the consumable s counter is reset Offset adjustment If the written document and the desired read position for scanning are different fine adjustment is possible At shipment the offset has been adjusted to an optimum value within a certain range Therefore adjustment 1s not generally required The maximum size of changes depends on the device Lamp timer Specify when the lamp turns off This is the elapsed time after a scan 1s complete 106 Reset The settings the tab folder are restored to their initial settings before the dialog box was displayed Power saving mode button This specifies the power saving mode If this button 15 clicked the following dialog box is displayed Scanner Device Power saving mode Electric Power Mode Quick Start mode Low Power mode Quick Start Mode This mode keeps the lamp on regardless the scanner s operating condition which saves times for lamp to becom
56. all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 128 Product M3099G M3099GX Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns ADF scanning speed ADF stacker capacity Document size Supported regular paper Cutout specific ation Background compensation Contrast setting Gamma pattern Image processing function Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Fluorescent tube Green Horizontal scanning 200 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 400 dpi at steps of 1 dpi 8 bit 256 levels Disabled Dither matrix can be downloaded Error diffusion M3099G Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55 kg 100 screens per minute lt M3099GX gt Single sided 60 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55 kg 100 screens per minute lt M3099G gt Maximum 500 sheets ream weight 55 kg A4 lt M3099GX gt Maximum 1 000 sheets ream weight 55 kg A4 Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Le
57. anning the same documents repeatedly Flatbed Reads a document placed on the flat bed of the device ADF Front Side Reads the document on the device s automatic document feeder ADF Here only front side is read ADF Duplex To scan both the front and the back of a page select this option If this option is selected the document is scanned in the front to back to front to back order This option can be used only for scanner models that support duplex scanning The Duplex Function requires that the calling application supports continuous scan If the application does not support continuous scan only the data for the front side of the page is passed to the application Some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix Long page front To scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet select this option The front side and back side can be specified using the same method used for ADF If this option is selected the Paper Size Setting dialog box opens Specify the size of the document to be scanned In this mode however the preview window cannot be displayed and the scanning area cannot be specified Scanner models that do not support this option do not display the Scan Type selection item 51 Long page front and backside In the same case as that for scanning the front of a long page
58. aper in the ADF User response Close the hopper tray cover or load paper Insufficient buffer memory size of scanner device for current scanning parameters Please reduce the scanning area or the resolution or install additional memory in the scanner Cause A memory option has not been installed in the image scanner Otherwise a large area or resolution that is not supported by the image scanner has been specified The memory inside the scanner may be insufficient due to the excessive data size of the scanning image User response Reduce the scanning area or resolution Otherwise install the memory option Refer to the User s Guide of the image scanner for more information In color scanning try to increase the data compression ratio The current parameter s is are not allowed Please use an other parameter s and try scanning again Cause An incorrect value has been specified for the image scanner The problem may be due to an illegal combination with the specification value from the application User response Change the specification values Then try scanning again 114 e The scanner is in an irregular status fuse is broken etc Please check the scanner status Cause A scanner fault such as a blown fuse or foreign matter in the scanning section has occurred User response Check the scanner status If a fuse has blown replace the fuse If there is foreign matter in the scanning section remove the foreign m
59. ata Source and follow the procedure 33 3 2 7 Updating the driver for Windows 2000 For some models an appropriate driver included as part of the operating system may be automatically installed during the power on sequence Consequently the newest driver for the system may not be installed by following the procedure given in Section 3 2 3 If this occurs update the driver by following the procedure below Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows Note The user must log in with administrator authority For information on logging in with the proper authority contact the system administrator 3 Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel 4 The System Properties dialog box 15 displayed Click the Device Manager button of the Hardware tab 5 The following device manager window opens and the device name is disp
60. ata processing User response Contact the retail store where the product was purchased or the nearest service center 118 7 1 2 Error messages relating to gamma correction pattern editing Enter a positive decimal value Cause User response A value other than a number has been entered as the gamma correction value Alternatively or a negative value has been entered Reenter a valid value The file could not be created Cause User response The file for saving could not be created There is insufficient space to save the file or the disk to which the file was to be saved is corrupted Alternatively writing to the directory which the file was to be saved may not be allowed or other programs relating to disk access may be affecting performance Increase the amount of available space on the disk Use a utility such as chkdsk or scandisk to check the hard disk Ensure that any background programs that access the disk are not operating If this error message continues to be displayed contact the place of purchase or your nearest maintenance and service center The file cannot be opened Cause User response The file could not be opened The specified file name may be incorrect or the disk from which it is being read may be corrupted Alternatively the specified file may be a write only file or other programs relating to disk access may be affecting performance If the specified filename is corre
61. ation CD 1 pa or floppy disk insert it now What do you want the wizard to Install the software automatically Recommended Click Next to continue 4 Confirm that Install from a list or specific location Advanced has been selected and click the Next button 23 5 The following screen is displayed Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive 15 temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start is defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen Found New Hardware Wizard Please choose your search and installation options gt 2 Search for the best driver in these locations Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver found will be installed Search removable media floppy CD ROM Include this location in the search D SD rmeerz Don t search will choose the driver to install Choose this option ta select the device driver fram a list Windows does not guarantee that the driver you choose will be the best match for your hardware 6 Select the Include this location in the search check box 7 From the screen di
62. atter If the error persists contact the retail store where the image scanner was purchased or the nearest maintenance and service center Ink cartridge is not installed in the imprinter properly Please check it and try Cause The imprinter Endorser has no ink cartridge or the ink cartridge may be mounted improperly User response Check that the ink cartridge of the imprinter 1s mounted properly and scan again e mprinter position is out of paper Please check the imprinter position and try again Cause Printing is not available because the printing part is outside the paper width User response Adjust the imprinter so that the printing part 15 settled within the paper width e A Hardware Error occurred on the imprinter option Cause Failure on Imprinter or Endorser User response Please check if the Imprinter or the Endorser is installed completely If the error occurs after checking the Imprinter or the Endorser please contact the retail store where the product was purchased or the nearest service center e The double feed is detected Cause The papers are scanned with double feeding One paper stuck to another User response Remove the papers stopped by double feeding and reset them 115 Memory is insufficient Cause Insufficient memory for scanning The memory available may be insufficient because an application consuming much GDI memory 15 operating too many other programs operate at the same time
63. contrast of light and shadow in a scanned image Specify the contrast with a number in the range of 1 low soft to 255 high sharp The contrast can be set if Gray Scale is selected in Image Mode If this value 15 increased the dark part of the image 15 shown darker and the light part 15 shown lighter Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix 56 4 5 Specifying Driver Operation Preview Preview Reads a preliminary image based set values and displays the image in the preview window Before actual scanning the preview function can be used to display the entire document for specifying the desired scan area This function is available only on devices that support the use of a flat bed Some models do not support this function See Relevant Image Scanner Specification Scan can Scans the specified scan range based on set values The following progress indicator is displayed during scanning to show the progress of the scan operation To stop scanning click the Cancel button The character string indicates the data transfer mode used between the driver and the application TWAIN Driver 32 Afer Mode Mative Infor mation ii Progress indicator Close OK Close DE Closes the dialog box without scanning If a setting is changed the changed setting is saved in
64. ct use a utility such as chkdsk or scandisk to check the hard disk Ensure that no background programs that access the disk are operating If this error message continues to be displayed contact the place of purchase or your nearest maintenance and service center There is a file formatting error Cause User response There is an error in the format of the specified file Either an incorrect file has been specified or the content of the specified file is incorrect After checking the users manual check that the content of the specified file 1s correct 119 7 2 Device Trouble Related to Operation The Scan button is pressed but scanning is not performed Cause Has the scanner power been turned on Has the SCSI cable been connected correctly Has the correct device type been selected using Select TWAIN Input Device The scanner appears to be operating but no image is displayed Cause User response Has the SCSI cable between the scanner and the main unit been connected correctly Is the Brightness value or Threshold value too small When the Minimize button is pressed is the Restore button displayed Is the application set to perform only file output If the Restore button 15 displayed after the Minimize button 15 pressed the problem could be the display driver that is being used Contact the manufacturer of the display driver If a file has been selected as output destination with t
65. cted connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows 3 If the scanner has been detected normally the following dialog box appears Add New Hardware Wizard Windows has found the following new hardware f 401 OCU Windows can automatically search for and install software that supports your hardware If your hardware came with Installation media insert iE now and click What would you like ta do Automatic search for better driver Recommended Specify the location of the driver Advanced Cancel 4 Confirm that Specify the location of the driver Advanced has been selected and click the Next button 5 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start 1s defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 14 6 The following screen is displayed Select the Search for the best driver for your device and select the Specify a location check box Then click the Browse button Add New Hardware Wizard Windows will search for new drivers its d
66. d extension of the file name is GMA there may be exceptions Creation of a gamma download pattern file can be facilitated using the following utilities for editing the gamma correction pattern Coding configuration gray scale in the X direction gray scale in the Y direction output value X1 output value X2 output value X253 output value X254 output value X255 output value Meaning of each element gray scale in the X direction indicates the size and the gray scale of the input value In this driver this value is fixed at 256 gray scale in the Y direction indicates the size and the gray scale of the output value In this driver this value is fixed at 256 Xx output value indicates the output value in the range of bright to 255 dark for an input value x Note Use a delimiter other than a number to delimit elements For most cases use a comma 95 Example 256 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153
67. dows 98 Windows NT 4 0 Windows Me Windows 2000 and Windows XP collectively Trademarks MS DOS Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation IBM PC AT and DOS V are registered trademark of International Business Machine Corporation Adaptec is a registered trademark of Adaptec Inc EZ SCSI is a trademark of Adaptec Inc Other product names are the trademarks or registered trademarks of the respective companies Organization This manual explains how to install and use this driver and how to use the TWAIN scanning utility e Installation This section explains the procedure for installing the environments in which this driver may operate e Using the Driver This section explains how to use the driver e Using the Utilities Use of the following utilities is explained Using the Gamma Pattern Editor e Troubleshooting This section explains the possible causes of error messages and operation errors and the corresponding recommended actions e Appendix The appendix contains the specifications of image scanners iii Contents KS Organizat Oi lii COUE 1 1 3 Characterstes or 1DiS DEIVOL 1 122 1 159 delirio dic z 3 TE dE xplanadlon uas iuc putos onte t daas xs bl eon uu Caire cR
68. e Offset adjustment 148 Product M3091DC fi 4110C Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Interface Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Fluorescent tube White 300 dpi 50 dpi to 600 dpi at steps of Idpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 15 pages per minute 200 dpi A4 55 kg Double sided 7 5 pages per minute 200 dpi A4 55kg 215 screens per minute Color Single sided 5 pages per minute 150 dpi A4 55 kg Double sided 2 5 pages per minute 150 dpi A4 55kg 5 screens per minute Maximum 50 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Minimum 52mm x 74 mm Maximum 216 mm x 356 mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Visiting card Specified one location Disabled 256 steps Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern
69. e cem Background Removal dr Mirror Image Mirror ab TC Figure Advance dialog image processing Edge Processing None Emphasis High Edge Extract Emphasis Mid smoothing Emphasis Low Backeround Removal This option specifies the sharpness of a scanned image Select None Edge Extract or Smoothing Background Removal None Edge processing 1s not performed Edge Extract This option outputs an image with the edge extracted If this option is selected the boundary between the black part and white part in a closed area is traced and the edge extracted DTC Variance and Edge Extract are mutually exclusive Smoothing Background Removal 79 This option specifies whether to smooth the curves in an image by removing zigzag lines Smoothing or Emphasis can be selected In addition Edge Extract and Emphasis are mutually exclusive Emphasis This option outputs an image with the edge emphasized Emphasis High Emphasis Mid or Emphasis Low can be selected If Emphasis High 15 selected the image becomes sharper If Emphasis Low is selected the image appears less distinct Mirror Mirror This option specifies whether to flip the scanned image over the scanning axis If this option 15 selected a mirror image of the originalimage is obtained Variance DTC Variance DTG Variance i Lowy Hight This option specifies the value f
70. e of the image These modes can be selected to eliminate the dark area on the leading edge and the left side appeared when using the flat bed OK button The adjusted value is written to the EEPROM This button may not be displayed depending on the scanner model The available settings also vary depending on the scanner model e g For fi 4110CU only the setting of the ADF part can be changed Changing this setting affects scanning operation of the scanner device greatly Care must be taken when changing 108 6 7 Version Information Tab Folder The version of this driver and a link to the Fujitsu home page are displayed 6 8 Color Management Tab Folder Color profiles assigned to the device can be added or deleted from this folder sRGB Color Space Profile 1cm is the default driver assigned to this driver 109 7 Troubleshooting 7 1 Error Messages 7 1 1 Messages from the TWAIN Driver e The input value is outside the range Cause A value exceeding the range allowed for an input item was input User response Input a value inside the allowed range Refer to the input item or the image scanner specification for the range e The input value is not acceptable Cause A value exceeding the range allowed for an input item was input User response Input a value inside the allowed range Refer to Help of the item or the User s Guide for the correct range e This file cannot be removed because it is specified
71. e power on open the property of the System in the Control Panel to display the list of Device Manager and confirm the registration condition of the scanner the scanner is registered under Other devices The scanner is registered with the driver installed improperly Select the scanner and click the Delete button to once delete the registration or right click and select the Delete When restarting the system the scanner 15 detected automatically Install Mini Driver following the procedure of each OS given in the section 3 2 1 to 3 2 4 If the scanner 15 registered under Imaging devices A driver of previous version may be installed Update the driver following the procedures of each OS given 3 2 5 to 3 2 8 The scanner is not registered anywhere The scanner may not be installed correctly Reconfirm whether the power of the scanner is turned on the scanner has been activated correctly or the scanner is connected to the personal computer correctly NOTE If the EZ SCSI of Adaptec has been installed the new hardware wizard may not be displayed on startup and it may cause install failure In this case please uninstall the EZ SCSI and restart the PC before install the driver 44 Using the Driver 4 1 Selecting the Driver To use this driver from the TWAIN application select FUJITSU TWAIN32 from the TWAIN data source driver selection screen For general application the data source selection scre
72. e steady Low Power Mode To save the power consumption this mode turns the lamp off if the scanner is not operated for 14minutes This button may not be displayed for some scanner models Detail button If this button is clicked the following dialog box 15 displayed Using this dialog box magnification for the sub scanning direction and the offset of the leading edge can be changed 107 Detail Auto Document Feeder ADF Vertical magnification Adjustment recommended 0 355 b 3z 6 3 10 3 Read start position Flatbed FE Vertical magnification Adjustment 1 5 1 53 1 5 to 1 54 p x Grable eliminating dark area on the mage Enable eliminating dak area on the left side oh the made Cancel Vertical Magnification correction The Vertical magnification correction value of sub scanning direction can be changed The magnification of ADF part can be changed in the range of 6 3 based on the setting value at shipping The magnification of FB can be changed in the range of 1 5 based on the setting value at shipping Read start position The read start position of sub scanning direction can be changed The Offset value Read start position can be changed in the range of 63 lines based on the setting value at shipping Enable eliminating a dark area on the top of the image Enable eliminating a dark area on the left sid
73. eens per minute Color Single sided 5 pages per minute 150 dpi A4 55 kg Double sided 2 5 pages per minute 150 dpi A4 55kg 5 screens per minute Maximum 50 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Minimum 52mm x 74 mm Maximum 216 mm x 356 mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Visiting card Specified one location Disabled 256 steps Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Automatic binary floating slice system De Screen Edge emphasis Reverse image SCSI II Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 151 8 2 Batch Detection Disabled Double feed detection Disabled Blank page skip Enabled only when ram cache 15 used Maintenance Service This section explains briefly how you can help us to provide you with high quality maintenance service Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your daily scanning operation please understand that our staff may sometimes be unable to answer
74. en 15 displayed by selecting the Select Scanner or Acquire menu Refer to the instruction manual for the application used for details 45 4 2 Screen Configuration Trlr ee Bag Ss ae oe eo eo eo wh hm Brrr E TS ES i aa NRLLRRRRRPRERERRRRRRRPRERRERERRRRRRRPRRRRRRPRRRRRRRRRRPRPRATRSRRSRaswUT TELIT 1660000 DELITTI oe p L om th Wee LIED E et Cit Lettie terete ree et Cette ee Peer er tee eer errr re Sig heh ahd Ghia k G J i Li 2 i B t i gt ou J el uas 4 z kx 5 ing oda Figure Main Dialog The following pages contain the explanation and operation description for each part 46 4 3 Displaying Driver Information Image scanner name Image Scanner ti 434 di IPCAD a2 MB Browse The model name option port name and capacity of internal scanner memory in units of megabytes of the connected image scanner are displayed If no image scanner is connected this field is blank The type of IPC option board is displayed 1f an image processing op
75. eparation With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 65535 at 5 digits display 0 to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top SCSI II Enabled Enabled Enabled front side and both sides Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Blank page skip Black Background Enabled only when ram cache is used If 0 mm is specified as the endorser print position printing will begin 42 mm from the edge of the page 140 Product M4099D f1 4990 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns ADF scanning speed ADF stacker capacity Document size Supported regular paper Cutout specification Background compensation Contrast setting Gamma pattern Image processing function Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Long page scanning 297mmx878mm Fluorescent tube White 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 400 dpi at steps of 1 dpi 10 bit 1024 levels Enabled 200 dpi only Dither matrix can be downloaded Error diffusion Asynchronous Scanning
76. er To perform more detailed diagnostic tests than those provided in the general tab folder click the Diagnose button In Windows2000 only a user who has administrator authority can run these tests M4097Ddm Properties P 103 6 5 Device Information Tab Folder A list of the functions compatible with the selected scanner driver is displayed The items displayed depend on the selected model of scanner Only hardware functions are displayed The functions realized by software are not displayed this tab folder Therefore the displayed content may not match the content specified during reading The contents of this tab folder are not displayed if the scanner driver 1s either currently in use or not connected to the computer If they are not displayed stop the application being used by the scanner driver or check the connection Then select this tab folder again to display the contents M4097Ddm Properties l E E 2 x Device Set About Color Management General Events Diagnosis Device Into Device infomation Function Standart Information vendar Identification FUJITSU Product Identification M409 Product Revision 06 H Scanning Area m videa Output Physical Function Imaging Board IPC Compression Function es Endorser Ma Miscellaneous Interface 104 6 6 Device Setup Tab Folder Information related to the operation and maintenance of the scanne
77. ersonal computer Ram cache 1 MB Prereads the allowable amount based on the allocated memory size and stores the data in PC memory Memory Size A memory size between and 200 MB can be set 64 Use Memory on Scanner Prereads using the memory installed in the scanner displayed only if supported by the scanner Batch Detection Batch Detection None The application can detect documents on a specific type of form special paper The application must support this function None No detection Scanning 15 done without change Include and Continue After the special paper is detected scanning continues The data on the special paper 15 also valid Include and Stop After the special paper is detected scanning stops The data on the special paper 15 also valid Exclude and Continue After the special paper is detected scanning continues The data on the special paper 15 excluded and will not be transferred to the application Exclude and Stop After the special paper is detected scanning stops The data on the special paper is excluded and will not be transferred to the application Double Feed Detection Double Feed Detection None This option detects a double feed occurs when two or more documents are sent based on the set condition If a double feed is detected when this setting has been turned on the device will stop and an error message output None Double feed detection i
78. es a range frame 1s shown 3 Release the left mouse button again to set the range bottom right corner of the scanning area Movement 1 Move the cursor into the range frame The cursor appears as a hand 2 Press the left mouse button The cursor changes to a fist 3 Drag the mouse to move the range frame 4 Release the left mouse button to set the current range Cancellation The range frame can be canceled by either of the following ways Click the left mouse button outside the range frame inside the scan document Select other paper types 50 4 7 Setting Options The option dialog is used to set device specific functions and the items that differ depending on whether the scanner used supports them The option specification 15 divided into Rotation Job Cache Generic Imprinter Endorser and Start Up The supported options depend on the scanner See Relevant Image Scanner Specification in the Appendix 7 is displayed for options that cannot be used The option dialog in this driver is explained below The commonly used buttons are explained first OK Enables the new setting and terminates the option dialog box Cancel Cancel Disables the new setting returns the setting to the previous value and terminates the processing Help Help Displays online help 60 The options are described below 4 7 1 Rotation Rotation
79. h button Found New Hardware Wizard Completing the Found New Hardware Wizard gt fi 4010CU The software for this device is now installed but may nat work corectly This device is not configured corectly Code 1 To close this wizard click Finish ance 10 Restart the system by following the instructions on the screen 21 11 Do the following to check whether the driver has been properly installed lt Device Manager gt Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel Then select the Device Manager tab folder in the system properties dialog box The device to be used is displayed under imaging devices As the model name a number following the letter M 15 displayed in case of connecting some scanner models Refer to the Appendix and confirm that the displayed model is the device to be used ET zi Device Manager Action View E S FMY 6400T ze Computer H E Disk drives 2 Display adapters Hii DVDICD ROM drives H Floppy disk controllers H E Floppy disk drives H a IDE ATA ATAPI controllers 22 Imaging device 1 8 Keyboards H Mice and other pointing devices 2 Monitors r BI Network adapters E Ports COM amp LPT H S SCSI and RAID controllers 22 Sound video and game controllers H E Storage volumes ide System devices H Universal Serial Bus controllers lt Scan
80. h for a better driver Recommended Specify the location of the driver Advanced Cancel 9 The following dialog box is displayed Select Display a list of all the drivers in a specific location so you can select the driver you want and click the Next button Update Device Driver Wizard Windows will now search for updated drivers in its driver database and in any of the following locations Search for a better driver than the one your device is using now Recommended Removable Media Floppy CD ROM Specify a location D Driverswin38_Me Browse 6 Display a list of all the drivers specific location so you can select the driver you want E Cancel 10 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start 15 defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 3 11 The following dialog box is displayed Click the Have Disk button and then click the Browse R button Update Device Driver Wizard 7j Select the manufacturer and model of your hardware device If you have a f disk that contains the updated driver click Have Disk To install the updated d
81. he driver by following the procedure below 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows Note The user must log in with administrator authority For information on logging in with the proper authority contact the system administrator 3 Right click the My Computer icon and select the properties menu item or double click the System icon on the Control panel 4 The System Properties dialog box is displayed Click the Device Manager button of the Hardware tab 5 The following device manager window opens and the device name is displayed under Imaging devices Device Manager lal Action View Help E Ea ES A Computer a Disk drives Display adapters DVDICD ROM drives Floppy disk controllers A Floppy disk drives ic controllers lt 5 Imaging devices cy Keyboards Mice and other pointing devices a Monitors B Network adapters
82. he environment settings by the image scanner operation confirmation utility try to change to screen output When you don t know how to replace consumables User response Refer to section 6 6 Device Setup Tab Folder Page counter for replacement procedure of consumables Also see the Operator s guide of the scanner for how to replace consumables 120 7 3 Device Trouble Related to Installation e Though the PC 15 activated after connecting the scanner device the scanner device is not detected automatically Cause User response Check the followings 1 2 X 4 Is the power of the scanner device turned on Is the cable connected correctly Has an error occurred Has the driver of old version already been installed Was the installation terminated incompletely at the previous time Isn t the EZ SCSI of Adaptec installed Refer to the section 3 5 When the scanner is not detected automatically to check the current state and perform the installation by the method appropriate for that state e The scanner does not scan though the driver has been installed Cause User response Check the followings 1 Have the Mini driver and the data source been installed in the right order If either of them has not been installed the scanner does not operate normally Is the scanner selected correctly in the application software being used Follow the procedure given in the chapter 3 Insta
83. ication White levelfollower Contrast setting Gamma pattern Image processing function M3099GH Desktop Reduced optical system Automatic Document Feed ADF simultaneous double sided reading Fluorescent tube Green 200 dpi Standard 400 300 240 200 dpi with image processing option 50 dpi to 400 dpi at steps of 1 dpi 8 bit 256 levels Disabled Dither matrix can be downloaded Error diffusion Single sided 80 pages per minute 200 dpi A4 55 kg 60 pages per minute 200 dpi A4 55 kg 120 screens per minute Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 216 mm x 356 mm A4 A4 Landscape 5 5 Landscape B5 B6 B6 Landscape Letter Legal US Executive Specified one location Enabled 256 steps 3 internal types can be downloaded simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 131 Imprinter With imprinter endorser option Reverse side minimum left marg
84. ified Cause The filename of the setting file has not been specified User response Enter the filename of the setting file Then try scanning again 112 Specified string is too long Cause User response The specified string is too long Up to 128 en size characters and up to 64 em size characters can be specified User response Reduce the number of characters in the string so that they do not exceed 128 en size characters Then try scanning again Cannot specify next words for filename V Cause User response The specified filename contains one or more of the following characters lt gt Enter a file name that does not contain the above characters Then make the settings again The image scanner cannot be found Cause User response Possible causes include the following an image scanner that is not supported by this driver has been connected no image scanner has been connected or the cable 1s not connected The scanner is used by other application This Driver can t be used at the same time with more than one application Check the connection of the image scanner Check that the scanner is not used by other application In the case of Windows XP Switch User lets another user log on while your programs and files remain open Therefore when you log on with Switch User it has the possibility that another user have already used the driver The specified im
85. ified one location Background compensation Enabled Contrast setting 256 steps Gamma pattern 3 internal types can be downloaded Image processing function Simplified Dynamic Threshold SDTC Image processing circuit II required Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal Interface SCSI II Batch Detection Enabled Blank page skip Enabled only when ram cache is used Use of this scanner requires that the image compression option board CMP 2 be installed in the scanner 2 This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration 3 Notall sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 122 Product M3093DG f1 4320 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed Double sided ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma pattern Image processing function Interface Batch Detection Blank page skip Desktop Reduced optical system Document fixed scanner unit mov
86. in printing position of 20 mm Maximum number of characters to be printed 20 characters Counter display range to 65535 5 digits display Direction Printing Top to Bottom Interface SCSI II Batch Detection Enabled Blank page skip Enabled only when ram cache is used 0 specified as the endorser print position printing will begin 20 mm from the edge of the page 132 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Isolation specification Background compensation Contrast setting Gamma pattern Image processing function fi 4640S Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Long page scanning 297mm x 1387mm Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of Idpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 0 9 sec or less 200 dpi A4 Single sided 45 pages per minute 200 dpi A4 55 kg Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm or Maximum 297mm x 1387 mm with Long Page Scanning Mode A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B
87. ing flat bed Automatic Document Feeder ADF simultaneous double sided reading Xe discharge tube Green 400 dpi Standard 600 400 300 240 200 150 100 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 1 6 sec or less A4 200 dpi Single sided 27 pages per minute 200 dpi A4 55 kg 22 5 pages per minute 200 dpi A4 55 kg 45 screens per minute Maximum 50 sheets ream weight 55kg A4 High quality paper normal temperature and humidity Maximum 216 mm x 356 mm A4 A5 A5 landscape A6 A6 landscape B5 B6 B6 landscape Letter Legal US Executive Specified one location Enabled 256 steps 3 internal types can be downloaded simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal SCSI II Enabled Enabled only when ram cache is used Automatic Size and Skew detection End of Page Detection An eight megabyte expanded memory option can be loaded in some models This speed is only specified in the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer setti
88. ing distortion must be corrected An arbitrary range 15 between 0 1 and 10 0 Color select Color select setting C Color Red C Green C Blue It is possible to select independent value on each color 85 Advance Front Image Mode Color Color Quality Image Emphasis None C De Screen Level 1 Emphasis High C De Screen Level 2 C Emphasis Mid C De Screen Level 3 C Emphasis Low C De Screen Level 4 Marg _ White Level Follower Disable Reverse mr eet e at Yu Figure Advance dialog Quality Image Mode Color selected gt Image Emphasis f None De Screen Level 1 C Emphasis High C De Sereen Level 2 C Emphasis Mid C De Sereen Level 3 C Emphasis Low De Screen Level 4 This option specifies the sharpness of a scanned image Select None De Screen or Emphasis None Edge processing 1s not performed Emphasis This option outputs an image with the edge emphasized Emphasis High Emphasis Mid or Emphasis Low can be selected If Emphasis High is selected the image becomes sharper If Emphasis Low is selected the image appears less distinct 86 De Screen De Screen Level 1 De Screen Level 2 De Screen Level 3 or De Screen Level 4 can be selected This option eliminate moir s patterns To eliminate more effectively higher level 15 selected White Level Follower White Level Follower
89. ing the OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Log in to Windows 3 If the scanner has been detected normally the following dialog box appears Click the Next button Add New Hardware Wizard Thiz wizard searches for new drivers Far f 401 OCU device driver is a software program that makes hardware device work Cancel 10 4 The following dialogue opens Confirm that Search for the best driver for your device Recommended has been selected and click the Next button Add New Hardware Wizard 5 Insert the setup disk titled FUJITSU Scanner Utility for Microsoft Windows into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly If automatic start is defined the start screen of setup is displayed To stop the setup operation click the Exit button on this screen 6 The following screen 15 displayed Deselect the Floppy disk drives and CD ROM drive check boxes and instead select the Specify a location check box Then click the Browse button Add New Hardware Wizard E ek 7 In the dialog box that is displayed select the following directory destination on the CD R
90. ion was designated when Gray Scale or Color was designated User response Designate a resolution value other than Custom 111 Cannot specify Gray Scale with duplex document Cause Duplex scanning is specified with Gray Scale specified User response At duplex scanning select Black white binary or Half tone for the Image type Cannot specify Individual Setting with Gray Scale Cannot specify Long Page Scan with Gray Scale Cause Gray Scale and Individual Setting are specified at the same time Gray Scale and Long Page Scanning are specified at the same time User response Uncheck Individual Setting when specifying Gray Scale At Long Page scanning select Black white binary or Half tone for the Image type Dither pattern file not found Cause File download has been specified but a file has not been selected User response Use the File button to specify a file Gamma pattern file not found Cause File download has been specified but a file has not been selected User response Use the File button to specify a file Selected file could not deleted Cause If the selected setting file is write protected it cannot be deleted User response Use Explorer to delete the file later Description not specified Cause The description of the setting file has not been specified User response Enter the description of the setting file in the description field Then try scanning again Filename not spec
91. is description operation A is executed first followed by B and C in that order Figures Figures and screen operations in this guide refer to Microsoft Windows 2000 They are also followed when using other operating systems Note that the expressions may vary with the type of scanner connected 1 4 Explanation of terms Q IPC option board IPC 2 2D in this guide refers to the 2 and IPC 2D image processing circuit IPC 3 3D in this guide refers to the IPC 3 and IPC 3D option board 2 TWAIN 2 1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface API for data exchange between a software application program and an image input device such as the image scanner TWAIN development background In the past development of a new scanner inevitably required the development of a compatible driver and a sample demonstration program exclusively designed for the new scanner As the scanner 15 upgraded the driver may need to be upgraded as well to maintain its compatibility with the upgraded scanner Therefore the use is most likely to be restricted to one specific scanner model to avoid the complication of learning new operation methods and replacing the peripheral driver etc involved in scanner replacement In view of the incompatibility among different scanners and peripheral equipment and the accompanying inconvenience there was a demand for standardization
92. is supported only in devices which the imprinter option can be installed See Relevant Image Scanner Specification described in the Appendix Y Offset Printing Y Offset a mm Specifies Y Offset from the edge of the original for the placement of printing See Relevant Image Scanner Specification in the Appendix because the standard value specified here depends on the device Direction Printing Direction to Bottom hi 68 Specifies the printing direction of endorsement strings When printing from the head of strings against to the direction of scanning designate to Bottom And when printing from the tail of strings against to the direction of scanning designate Bottom to Top However see the Relevant Image Scanner Specification described in the Appendix since the available settings depend on the device Initial Value Counter Initial Value a Designates the initial count when the Imprinter String is set including a counter value See the Relevant Image Scanner Specification described in the Appendix since the programmable values range depends on the device Counter Step Counter Step Inc Dec Designates the counter increment of the set counter values In other words this value is added to or subtracted from the counter each time one original is scanned An increment of 0 1 or 2 may be specified Usually 1 1s designated for a single sided original and 2 for
93. layed under Imaging devices Em ae 6400TX W Computer 3 Disk drives EN Display adapters DvDICD ROM drives Floppy disk controllers Floppy disk drives IDE ATA ATAPT controllers magng visse Mice and other pointing devices Monitors BH Network adapters H i Ports COM amp LPT eg SCSI and RAID controllers 1 1 1 1 1 0 GE I Sound videa and game controllers H E Storage volumes System devices 2 Universal Serial Bus controllers 34 6 Select the device name right click the device icon and select the Properties menu item from the pop up menu 7 The Properties dialog box is displayed Select the Driver tab folder and then click the lower right Update Driver button 8 The Update Device Driver Wizard dialog box 15 displayed Click the Next button 9 Select Display a list of the known drivers for this device so that I can choose a specific driver and click the Next button Upgrade Device Driver Wizard Install Hardware Device Drivers e A device driver is software program that enables a hardware device to work with Sy operating system This wizard upgrades drivers for the following hardware device 29 4010 0 Upgrading to newer version of a device driver may add functionality to improve the performance of this device What do you want the wizard to do Search for a suitable driver for my device
94. llation perform the installation correctly Refer to the application software manual and select the scanner to use correctly to perform scanning e Cannot install the driver on WindowsXP When you use fi 4110CU M3091DC or fi 4210C M3092DC scanner a driver bundled to WindowsXP may be automatically installed Refer to lt Using f 4110C M3091DC 4210 M3092DC with WindowsXP gt of Other instructions in section 3 1 Cause User response 121 8 Appendix 8 1 Relevant Image Scanner Specification Product M3093GX device name fi 4320S Type Desktop Image sensor Reduced optical system Operating method Document fixed scanner unit moving flat bed Automatic Document Feeder ADF Light source Xe discharge tube Green Basic resolution 400 dpi Output resolution Standard 400 300 240 200 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi Grayscale levels internal 8 bit 256 levels Grayscale output Enabled 8 bits Halftone Patterns Dither matrix can be downloaded Error diffusion Flat bed scanning speed 1 6 sec or less A4 200 dpi ADF scanning speed 27 pages minute 200 dpi A4 55 kg ADF chuter capacity Maximum 50 sheets ream weight 55kg A4 Document size Maximum 216 mm x 356 mm Legal size paper Supported regular paper A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Isolation specification Spec
95. log Help button Help i Displays online help Show this dialog next open checkbox Show this dialog next open If this checkbox 15 checked the Basic Scan Dialog will be opened at the next startup If this checkbox is not checked the main dialog will be opened at the next startup 92 4 11 Download Pattern File The download pattern file of this driver is a file that defines the patterns to be used by the scanner to execute various image processing This 1s available in the following two versions Each version can be selected using the Download Selection Dialog that opens when Download is selected The file 15 a text file that conforms to the following rules Use an appropriate text editing program for example Note Pad in the operating system to edit the file Dithered download pattern file Any user defined dithered pattern can be used to scan an image by downloading the pattern from the dithered download file to the scanner The defined pattern becomes effective when Download Pattern is selected for Halftone Some models do not support this file See Relevant Image Scanner Specification in Appendix Although the standard extension of the file name is DTH there may be exceptions Coding configuration n size in the X direction m size in the Y direction pattern value for the X1 Y1 coordinates pattern value for the X1 Y2 coordinates pattern value for the X
96. m x Leneth al mm Cancel Help Figure Custom paper size setting dialog To specify a custom paper size use the scroll bar or enter the paper size directly The applicable unit here is the unit specified under Option Generic Unit Scaling Scanning Area Scanning is Width Length Specifies the start position width and length for the image scan The maximum allowable size is the paper size selected previously In addition the minimum size is 1 000 inch 26 millimeters or pixels number of dots per inch according to the unit that has been set Left The left end of the scan area on the scanned document X coordinate The top end of the scan area or the scanned document Y coordinate Width The width of the scan area Length The length of the scan area These values are related to one another in the following way 0 lt left end coordinate lt paper width minimum scan area size 0 top end coordinate paper length minimum scan area size Minimum value lt width lt paper width left end coordinate Minimum value lt length lt paper length top end coordinate 50 Scan Scanning Type Flat Bed Selects the feeding device The image scanner uses a document bed called the flat bed as well as an automatic document feeder ADF for feeding scanned document The ADF usually enables the documents to be scanned only once The flat bed allows sc
97. matrix can be downloaded Error diffusion 24bit B W 0 9 sec or less 200 dpi 4 Color 3 6 sec or less 200 dpi A4 B W Singk sided 50 pages per minute 200 dpi A4 55 kg Double sided 45 pages per minute 200 dpi A4 55kg 90 screens per minute Color Single sided 12 pages per minute 200 dpi A4 55 kg Double sided 11 5 pages per minute 200 dpi A4 55kg 23 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 139 1 Image processing function Imprinter Endorser Interface Batch Detection Double feed detection Long page scanning simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse image With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic S
98. mmended Intel Pentium 100MHz or higher on which one of the following operating systems are installed Microsoft Windows Millennium Edition Microsoft Windows 98 Microsoft Windows 2000 Microsoft Windows XP e USB port RAM 32 MB or more a minimum of 64 MB is recommended Available hard disk space 10 MB or more excluding the area for storing images CD ROM drive required for installation Mouse recommended 1 3 Explanatory Notes The descriptions in this manual are prepared based on the following rules 9 Menus and buttons The menus and buttons used in the program description are enclosed in Example File menu OK button Keyboard The keytop indications comply with the standard keyboard of the Fujitsu FMV series Major differences between the Fujitsu FMV keyboard and other keyboards are shown below keytops Other possible keytops Alt Previous screen GRPH Ctrl CTRL Esc ESC Enter Return lt Shift SHIFT Back space Backspace BS Fl f 1 Terms related to mouse operation Terms related to major mouse operations are explained below Click To press and release the mouse button Double click To quickly press the mouse button twice Drag Move the mouse while keeping the mouse button pressed Notes on operation procedures If some menus need to be operated in a certain order the procedural order is described as follows A B C In accordance with th
99. moothing Filtering Noise removal Automatic Separation This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 135 1 Imprinter With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range to 65535 at 5 digits display 0 to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II Batch Detection Enabled Double feed detection Enabled Long page scanning Enabled front side and both sides Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Blank page skip Enabled only when ram cache is used If 0 mm 15 specified as the endorser print position printing will begin 42 mm from the edge of the page 136 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Isolation specification Background compensation Contrast setting Gamma pattern
100. n the scanner See Relevant Image Scanner Specification in the Appendix 15 displayed for options that cannot be used The option dialog for this driver is explained below The commonly used buttons are explained first OK Makes the new setting valid and closes the option dialog box Cancel Cancel Makes the new setting invalid returns the setting to the previous value and terminates processing Help Help Displays online help 75 The options are described below 4 8 1 Gray Advance rant Black amp White OTC mode Cancel Color Gray pTC Gamma mmo Gamma Pattern Nor mal m 51 a More White Level Follower auto Dropout Color Panel setting Reverse Figure Advance dialog density correction Gamma Pattern Gamma Pattern Nor mal This option corrects distortions from nonlinear image representation Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document However most output terminals do not produce output that has the desired linear relation to the input and the resulting distortion must be corrected One of the following can be selected as a correction pattern Normal Soft Sharp Download Pattern or Custom Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix 76
101. n this CD or can be downloaded from our web site cannot be installed on WindowsXP as a bundled WIA compliant device driver is automatically installed If you wish to install the device driver in this CD on WindowsXP you need to delete the WIA compliant device driver mentioned above Note 1 The following procedure is not necessary when you use any other OS than WindowsXP Note 2 You need to log on with a user name having an administrator authorization How to delete inf file 1 2 Connect the scanner and activate WindowsXP WindowsXP automatically recognizes the scanner and installs the WIA compliant device driver Delete Fujitsu M3091DCd or Fujitsu M3092DCd listed imaging device of device manager Insert Scanner Utility for Microsoft Windows CD ROM into the CD drive Double click on FtDelInf exe file in infTool folder to execute Ft pellit exe The following message appears Select Yes Scanner inf delete tool Click Yes button to delete INF File complienk with WIA d IF this INF File exists driver complient with STI cannot be installed Otherwise please click Ma The following message appears indicating that the procedure has completed Select OK to terminate the procedure Restart WindowsXP Now you can install the fi 4110C M3091DC or fi 4210C M3092DC scanner driver by following the procedure described in section 3 2 Installation
102. n with flat bed scanning This function does not work properly for some applications Black Background If it is selected the outside of document paper becomes black by using black background during scanning This option may not be supported for some scanners See Relevant Image Scanner Specification in the Appendix Priority Priority E speed Accuracy Setup for speed versus automatic document size detection Select a small value when scanning speed is the higher priority Select a large value when document detection accuracy is the higher priority Priority can only be setup when Automatic Page Size Detection is selected at Automatic Size and Skew Detection 63 4 7 2 Job Cache Rotation Job Cache Generic Caching Cancel Cache Mode None 2 Help bemors size ADF Option Double Feed Detection None Blank Page Skip Black Dots Ratio Figure Option dialog Job Cache Caching Cache None Specifies whether to preread cache when a document is scanned This option enables faster scanning If processing of the application being used slows down and scanning stops this option can be used to prevent degradation of the scanning speed The effect however depends on the environment being used None Caching is not performed Read ahead One document page is scanned and the data is preread and stored in PC memory main memory of the p
103. nal types can be downloaded This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 124 1 Image processing function Imprinter Endorser Interface Batch Detection Double feed detection Long page scanning simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse image 256Color 8 Color With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation With imprinter option Reverse side minimum left margin printing position of 7 mm Maximum number of characters to be printed 40 characters Counter display range to 65535 at 5 digits display 0 to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top SCSI II Enabled Enabled Enabled front side and both sides Automatic Size and Skew detection Blank page skip Page End Detect Automatic Page Size Detect Black Background Enabled only when ram cache is used If 0 mm is specified as the endorser print position printing will begin 7 mm from the edge of the page 125 Product M3096GX fi 4620S Type Image sensor Operating method Light source Basic resolution O
104. ner and Camera gt The Scanners and Cameras icon is registered in the Control Panel The scanner driver to be used appears in the Scanners and Cameras Properties dialog box To display the dialog box double click this icon For information see the section that explains the settings of the control panel 12 Go to the section 3 3 Installing TWAIN Data Source and follow the procedure 22 3 2 4 Installing for the first time For Windows XP 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if it is connected after activating OS If multiple scanners are to be connected connect and turn on scanners one at a time Then turn on the personal computer Repeat the remainder of this installation procedure for each scanner 2 Login to Windows Note The user must log in with administrator authority For information on logging in with the proper authority contact the system administrator 3 If the scanner has been detected normally the following dialog box appears Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps install software for FUJITSU fi 4340Cdi SCS Scanner Device fe If your hardware came with an install
105. ngs can be used 123 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color Scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Isolation specification Background compensation Contrast setting Gamma pattern fi 4340C Desktop Color CCD Reduced optical system Document fixed Flat bed Automatic Document Feed ADF simultaneous double sided reading Long page scanning 216mmx1541mm Fluorescent tube White 400 dpi Standard 50 dpi to 800 dpi at steps of 14 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 24bit B W 1 2 sec or less 200 dpi 4 Color 2 8 sec or less 200 dpi A4 B W Single sided 40 pages per minute 200 dpi A4 55 kg Double sided 40 pages per minute 200 dpi A4 55kg 280 screens per minute Color Single sided 16 pages per minute 200 dpi A4 55 kg Double sided 24 5 pages per minute 200 dpi A4 55kg 29 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 216 mm x 297 mm or Maximum 216mm x 1541 mm with Long Page Scanning Mode A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal Specified one location Enabled 256 steps 3 inter
106. nse User response Use an editor to check file format and data ASPI manager not found Cause The ASPI manager may not have been installed or may have been deleted User response Reinstall the products including the ASPI manager attached to the SCSI board Then reboot the PC 116 Mini Driver not found Cause User response The Mini driver may not have been installed or may have been deleted Install the minrport driver following the instructions mentioned in 3 2 Installation of the mini driver Scanner DLL file not found Cause User response An image scanner was selected but the DLL file of the selected image scanner has not been installed the directory in which this driver 15 installed Perform the setup again A parameter error has occurred internally The calling procedure is invalid internally The area 1s specified incorrectly internally The calculation result exceeded the value that can be expressed internally User definition 15 not registered internally Illegal value 1s received internally Cause User response This is a program error that occurs during command exchange between the driver and the image scanner Try again by rebooting the machine If the error persists contact the retail store where the product was purchased or the nearest service center A general fault of MSG XXXXX response internally Cause User response This is
107. nstead of the main dialog box at the next activation TWAIN Driver Bazic Scan dialog Setting Files ho Ganfigurationl 1 for Document ocan EIS Alle Information OK Name gt conu lits Adjust Dozcnm cn Gonfguretion for Document 2 Time tarum 334 Help Gasic PTS TERT gt gc Show this dialog next open lt Scan Procedure gt 1 Select the file to be used from the list of setting files 2 Press the Scan button Scanning is performed based on the settings of the setting file information lt Configuration gt Setting Files Setting Files ho Configuration for Document list of setting files is displayed When the desired file is selected the setting information saved in the file will be read and reflected during scanning 91 FTS File Information ie Infosmation Mann cong riis CPS SOT gt Gontiguretian t for Document Inn Gama gt 334 Gasic PPS cut amr gt x The contents of the selected file are displayed Scan button Executes scanning based on the contents of the setting file OK button OK Terminates without performing the scan operation Adjust button Adjust i Switches from the basic scan dialog to the main dia
108. nted 1mage to create better reproduction of a scanned photograph Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Scanning Parameters For fine scan adjustments Since there is no fixed set of values set by trial and error Brightness Brightness Sets the brightness of the overall image Specify the brightness with a number in the range of 1 bright to 255 dark To brighten the overall image decrease the value of the setting To darken the overall image increase the value This parameter can be set if Halftone or Automatic Separation is selected for Image Mode Threshold Threshold ra Sets the threshold vale by which the black and the white of black and white images are distinguished Specify a number in the range of 1 bright to 255 dark This parameter can be set only if Black amp White is specified for Image Mode In addition if Auto Binary is selected the scanner will automatically use the appropriate threshold value As a result the set value cannot be changed In addition if Auto Binary is selected the scanner will automatically use the appropriate threshold value As a result the set value cannot be changed If the light color in the scanned document is read as white increase the threshold value To eliminate light colored areas in the scanned document decrease this value 55 Contrast Threshold Sets the
109. odels Refer to the Appendix and confirm that the displayed model is the device to be used System Properties General Device Manager Hardware Profiles Performance View devices by type C View devices by connection W Computer H COROM H E Disk drives Display adapters f Floppy disk controllers H 4 Hard disk controllers E Imaging Device 1 88 Keyboard m m Monitors E 2 Mouse 5 88 Network adapters E Other devices lf Parts COM amp LPT i SCSI controllers H System devices Properties Refresh Remove Print ree lt Scanner and camera gt The Scanners and Cameras icon is registered in the Control panel The scanner driver to be used appears in the Scanners and Cameras Properties dialog box To display the dialog box double click this icon For information see the section that explains the settings of the control panel 12 Go to the section 3 3 Installing TWAIN Data Source and follow the procedure 13 3 2 2 Installing for the first time For Windows Me 1 Connect the scanner to be used to the computer Then turn on the scanner Lastly turn on the personal computer Note In case of the SCSI connection be sure to turn on the power in this sequence Otherwise the scanner may not be detected In case of the USB connection the scanner can be detected if 1t is connected after activating OS If multiple scanners are to be conne
110. of different models is displayed Select the appropriate device name and click the Next button Select the same device name as the name selected procedure 6 36 14 The following dialog box is displayed Click the Next button Installation starts Upgrade Device Driver Wizard Start Device Driver Installation The device driver will be installed with the default settings The wizard is ready to install the driver for the following hardware device f 407 OCU Windows will use default settings to install the software For this hardware device To Install the software for your new hardware click Cancel 15 When the file has copied and installation is completed the following dialog box is displayed Click the Finish button Upgrade Device Driver Wizard 5 E Completing the Upgrade Device Driver Wizard fi 4010CU Windows has finished installing the software Far this device The hardware you installed wall not work until vau restart Your computer To close this wizard click Finish Eancel 16 Restart the system by following the instructions on the screen 17 Go to the section 3 3 Installing TWAIN Data Source and follow the procedure 37 3 2 8 Updating the driver for Windows XP If a driver of previous version has been installed the latest driver for the system may not be installed by following the procedure given in Section 3 2 4 If this occurs update t
111. on uses an algorithm that removes particles from 2 x 2 to 5 x 5 dot matrixes The size of one dot depends on the resolution setting and 15 equivalent to 1 400 inch for 400 dpi Particles are distinguished from the text by whether they are connected to other dots within the specified number of pixels At IPC 3 3D Noise Removal and OCR smoothing Background removal is enabled exclusively Advance Front E _ X Image Mode Black amp White DTG mode Gray 070 Density Threshold Curve Dark Equal ta White Filtering Ball point pen mode OCR Smoothing Background Removal Noise Removal None n Figure Advance dialog DTC Mode lt IPC 3 3D and IPC 4D installed gt 83 4 8 4 When Color is specified For color devices if Color is selected in the image type dialog display changes as follows Advance Front E X Image Color Color Quality Color select Common setting C Color f Red Green Blue Shadow Highlight Contrast Brightness Gamma Shadow Highlight 256 Cancel Help Figure Advance dialog Color Image Mode Color selected gt Shadow Highlight Shadow Highlight 255 Shadow The highlight allows the darkest part of the document to be controlled The higher the shadow value the darker the image Highlight The highlight allows the brightest part of the document to be controlled The
112. operator s guide of the device Note Depend on some scanner models once the Device Set tab appears the operation panel is unable to be handled In this case close this dialog and turn the power ON OFF of the scanner After the scanner setup the operation panel is able to be handled 105 When using a scanner the following message may be displayed Please replace PAD UNIT in paper feeder in case of the feeding capacity has gone down Regarding how to replace the pad please refer to the Instruction manual or contact a maintenance person Code OS42003 T It i about time to replace the consumable supplies This message not display again Warns again after scanning 100 pages If this message appears replace consumables following the instructions below If replacing consumables immediately gt 1 Check This message not display again 2 Incases where consumables are replaced after completing all documents being scanned click Ignore In cases where scanning is stopped for an immediate replacement click Cancel Following the operator s guide of the device replace the consumables 4 Select Page counter from Device setup click Clear button to reset the consumables counter If replacing later immediate replacement is impossible gt 1 Ifitis not necessary to display this message again check This message not display If it is necessary to display this message ag
113. or Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Isolation specification Background compensation Contrast setting Gamma pattern Image processing function Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF simultaneous double sided reading Long page scanning 297mm x 1387mm Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of Idpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 0 9 sec or less 200 dpi A4 single sided 50 pages per minute 200 dpi A4 55 kg Double sided 45 pages per minute 200 dpi A4 55kg 90 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse image With image processing option Dynamic Threshold DTC S
114. or adjusting the dynamic threshold of an image based on the brightness of the image A value between 1 and 7 can be specified using the scroll bar The smaller the value the lower the variance becomes The higher the value the higher the variance becomes Click the arrow of the scroll bar or drag the scroll marker to the desired setting position The current setting 15 displayed the right This option is mainly used for optical character recognition OCR It enables dark and bright images in a document to be scanned effectively Floating Slice Level SDTC Floating Slice LeveltF Lon High Specifies the level of the binary processing done by the floating slice Set the level to higher when scanning documents with dark colored background This is displayed only when the SDTC mode Floating Slice is specified 80 4 8 3 This option is valid only when DTC Variance 15 set Ad Black amp White DTG mode Cancel Help Color Gray OTC Density ocan mode for OCR for Image Threshold Curve fim fe Hormal I I I C Light inii Equal to White Gamma Curve 1 Filtering Noise Removal Ball point pen mode None Smoothing Figure Advance dialog DTC Mode Scan mode ocan mode for OCR for Image This option selects one of the following two scan modes for OCR This mode is for text recognition applications where
115. or there are too many registered device drivers The user may mistakenly think that adding more memory will solve this problem However in most cases memory shortage 15 due to insufficient conventional memory called the main memory within 640 kilobytes Checking CONFIG SYS and AUTOEXEC BAT may be a better solution User response Cancel the registration of device drivers that are irrelevant and make sure that only the absolutely necessary programs are operating Use the memory optimization tool to allocate as much conventional memory as possible An error occurred in the temporary file Cause Accessing the internal temporary file of the scanned image is causing the error The disk space may be insufficient the temporary file may be damaged or other programs may be affecting disk access User response Increase the free space of the disk Check the hard disk chkdsk and scandsk Make sure that no other program is accessing the disk If the error message persists contact the retail store where the product was purchased or the nearest service center Download file not found Cause A file specified as a dither pattern or gamma pattern cannot be found User response Check that the download file is in the specified directory Otherwise use the file selection dialog to specify an available file Illegal format or data in download file Cause The format of the specified download file is illegal or the data 15 incorrect User respo
116. pleted the scanner does not operate correctly There are two methods for installation of the Mini driver Installing for the first time and Updating the driver When connecting the scanner to the PC for the first time Follow the procedure given in the section 3 2 1 to 4 and perform Installing for the first time When updating the version of the scanner driver in use Follow the procedure given in the section 3 2 5 to 8 and perform Updating the driver Other instructions For Windows98 gt Once a scanner is installed to Windows 98 the information is remain in Control Panel Scanner and Camera regardless of with or without connection When unconnected scanner is chosen by mistake it may cause error This error dose not happen when the scanner is selected correctly To prevent errors please delete disused scanner information from Control Panel Scanner and Camera in following cases before install the driver 1 Options such as IPC board or JPEG board are added to the scanner which is already connected to PC gt Please delete the previous scanner from Control Panel Scanner and Camera before installing the driver 2 Scanner replacement gt Please delete the previous scanner from Control Panel and Scanner and Camera before installing the driver Using fi 4110C M3091DC fi 4210C M3092DC with WindowsXP gt The device driver for fi 4110C M3091DC and fi 4210C M3092DC that is included i
117. r driver can be displayed and set up For some scanner models some items cannot be set up grayed out Changing the setup activates the Apply button The changed setup is reflected on the device only if the Apply button or OK button is clicked The contents of this tab folder are not displayed if the scanner driver is either currently in use or not connected to the computer If they are not displayed stop the application being used by the scanner driver or check the connection Then select this tab folder again to display the data In Windows2000 only a user who has administrator authority can change the setup from this tab folder f 4110CUd Properties General Events Diagnosis Device Info Device Set About Color Management Page Counter Total Page Count Pad Counts Pick Roller Counts Offset Setting wl o ouo med o Fu Lamp T imer Fluorescent time H sec Power saving Detail Cancel Apply Page counter An approximate total of the number of pages that the ADF has read is displayed An equivalent count of the pages read after consumables are replaced 15 also displayed To set the consumables counter to zero after replacing consumables click the Clear button Depending on the device this operation can be executed using the operation panel of the device Displayed consumables names or item numbers also vary depending on the device For information see the
118. river click Finish Models Fl4 50Cdijm Fl4 750Cdim Mangintd Show compatible hardware Have Disk Show all hardware 12 In the dialog box that is displayed select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C fi 4010CU fi 4110CU fi 4110C M3091DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models D Driver2 Others win98 Me 13 A list of different models is displayed Select the appropriate device name and click the Next button Select the same device name as the name selected in procedure 6 14 The following dialog box is displayed Click the Next button Installation starts Update Device Driver Wizard Windows driver file search for the device fi 4110CUd Windows is now ready to install the selected driver for this device Click Back to select a different driver or click Next to continue Location of driver Sy D DRIVER WINS8_MESFJSCMUSD INF 1 Cancel 32 15 When the file has copied and installation is completed the following dialog box is displayed Click the Finish button Update Device Driver Wizard zj fi 4110CUd Windows has finished installing the driver you selected for your hardware device i Cancel 16 Restart the system by following the instructions on the screen 17 Go to section 3 3 Installing TWAIN D
119. river database an Your hard dive and in ang of the following selected Search for the best driver for your device Recommended Removable Media Floppy CO ROM Specify a location DNDRIVER WIN98_ME Browse Display a list of all the drivers in a specific location sn you can select the driver you want Cancel 7 Inthe dialog box that 1s displayed select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 4110CU fi 41 10C M3091DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models D Driver2 Others win98 8 Click the Next button and confirm that the following screen is displayed Click the Next button again Add New Hardware Wizard Windows driver search for the device fi 4010CU Windows now ready to install the best driver for this device Click Back ta select different driver or click Mest to continue Location of driver po DADRIVER SWIN IS MESFISCMUSD INF 15 9 When installation is completed the following screen 15 displayed Click the Finish button New Hardware Wizard 10 Restart the system by following the instructions on the screen 16 11 Do the following to check whether the driver has been properly installed lt Device Manager gt Right click the My Computer icon and select the proper
120. s A single Duplex tab will be displayed at the left so that the same image scanning information can be set for Front side and Back side To scan using different settings for Front side and Back side check the Individual Setting checkbox the Front and Back tabs Two tabs Front and Back will be displayed at the left Select each tab and enter the desired settings This is only effective when ADF Duplex is selected for the method of paper feed For scanner types which permit duplex scanning see Relevant Image Scanner Specification in the Appendix Resolution Resolution Specifies the number of pixels dots per inch Select a fixed resolution from the list or Custom High resolution requires more memory The supported resolution depends on the type of scanner and the options installed See Relevant Image Scanner Specification in the Appendix 49 Paper Size Paper Size lad 210x297 Selects a paper size corresponding to the size of the document to be scanned Select a standard paper size from the list or Custom If Custom is selected the Custom Paper Size Setting dialog appears Enter the size of the document to be scanned In this case specify the paper size by width x length against the scanning direction Some paper sizes may not be accepted by your device See Relevant Image Scanner Specification in Appendix Custom Paper Size Setting Width DZ m
121. s not performed Hardware Setting A double feed 15 detected based on the device setting Check thickness The thickness of the transmitted document 15 checked by the sensor in the device A double feed is detected by detecting changes in the thickness when more than one document is sent 65 Check length The length of the transmitted document is checked by the sensor in the device A double feed is detected by detecting changes in the length when more than one document is sent Check thickness and length The thickness and length of the transmitted document are checked The detection accuracy can be improved by using Check thickness for continuous scanning of forms that have different lengths and Check length for scanning of forms that have different thicknesses Blank page skip Black Dots Ratio This option skips blank pages blank pages or completely black pages during ADF continuous scanning For blank pages use the White Dots Ratio scroll bar to set the skip condition For black pages use the Black Dots Ratio scroll bar to set the skip condition The value displayed to the right of the scroll bar displays the garbage ratio 1 Ifa scanned document is below this value it is recognized as a blank page The setting range 15 OFF and 0 2 to 3 0 in increments of 0 2 lt If blank page skip does not operate properly gt Ifa blank page is scanned increase the value set If scanning is skipped up
122. s without prior notice Fujitsu takes no responsibilities for infringements of third parties patents or other rights that may stem from the use of the data this document 9 Unauthorized reproduction of this document is prohibited 9 Missing or misplaced pages are subject to exchange 154
123. splayed by the Browse button select the following directory destination on the CD ROM and click the OK button 1 In case of model f1 4340C f1 4010CU fi 4110CU fi 41 10C M3091 DC fi 4210C M3092DC fi 4990C D Driver2 When the CD drive is setting in D 2 In case of other models Driver2 Others Win2k_ 24 8 Click the Next button and the following screen 15 displayed Click the Continue Anyway button Hardware Installation The software you are installing for this hardware fi 4340Cdij has not passed Windows Logo testing to werty its compatibility with Windows XP Tell me why this testing iz important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing STOP Installation 9 When the file has been copied and the installation is completed the following screen is displayed Click the Finish button Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for 2 fir A134UC di 339 The hardware you installed will not work until pau restart Your computer Click Finish to close the wizard Cancel 10 Restart the system by following the instructions on the screen 1
124. ta using 256 colors Data size 1s smaller than Color selected Please note that the image quality of 256 colors 8 bit 1s inferior to the case of 24 bit Color Choose 24 bit Color for higher quality Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix 8 colors Scans data using 8 colors Data size 1s smaller than 256 Colors selected Please note that the image quality of 8 colors is inferior to the case of 24 bit Color and 256 colors 8 bit Choose 24 bit Color for higher quality Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix Black amp White Black White Stat Threshold Specifies the processing method when Black amp White is specified in Image Mode 53 Static Threshold Executes simple binary processing based on the Threshold setting SDTC DTC mode To enable the auto binary function of the image scanner specify this option If this option is selected the Threshold setting will be disabled In addition auto binary has two modes SDTC Mode and DTC Mode These modes can be set using the Advance dialog box DTC Mode however is limited to the image processing options Therefore only scanner models that have image processing options support DTC Mode See Relevant Image Scanner Specification in the Appendix SDTC mode Floating Slice This option enables
125. tem Properties dialog box is displayed Click the Device Manager tab 5 The following device manager window opens and the device name is displayed under Imaging devices In some cases it is displayed under Other devices System Properties 20x General Device Manager Hardware Profiles Performance View devices by type View devices by connection 9 Disk drives Display adapters H Floppy disk controllers 5 Hard disk controllers a Imaging Device Infrared devices Modem Monitors VQ Mouse Network adapters e Other devices PCMCIA socket o 7 Ports COM amp LPT a Properties Refresh Remove Print e Er EH Close Cancel 6 Select the device name right click the device icon and select the Properties menu item from the pop up menu 7 The Properties dialog box is displayed Select the Driver tab folder and then click the lower right Update Driver button 30 8 The Update Device Driver Wizard dialog box is displayed Select Specify the location of the driver Advanced and click the Next button Update Device Driver Wizard This wizard searches for updated drivers For f 4110CUd Windows can search For and install an updated driver to replace the one curently being used by your hardware wou can specify the location of another driver What would you like to do C Automatic searc
126. the UP direction the density changes Normal gt gt Darker scanning gt gt Dark scanning If moving the density dial to the Down direction the density changes Normal gt gt Lighter scanning Light scanning If the dial is in the center the scanning density 15 Normal Enable Duplex button Enable Duplex button This specifies whether the Duplex button to switch simplex and duplex on the scanner operator panel is reflected to the scanning If this box is checked scanning changes Simplex gt gt Duplex gt gt Simplex with the Duplex button is pressed Enable Send to button Enable SendTa button Specifies whether the preview is started by pressing the Send to button on the device Enable ADF Scanning Start Enable ADF Scanning Start f Scan Button Document Detection Specifies whether ADF auto feed is started by a scanner event Scan button Pressing the Scan button on the scanner starts scanning from the ADF 73 9 Document Detection When paper is detected on the ADF scanning automatically starts 74 4 8 Setting Advance Options The advance dialog is used to set items related to image processing The settings apply to device specific functions and items that differ according to whether the scanner used supports them The advance option specification is divided into Color Variance Image Processing and Auto Binary The supported options depend o
127. ties menu item or double click the System icon on the Control panel Then select the Device Manager tab folder in the system properties dialog box The device to be used is displayed under imaging devices As the model name a number following the letter 15 displayed in case of connecting some scanner models Refer to the Appendix and confirm that the displayed model is the device to be used System Properties El gt General Device Manager Hardware Profiles Performance View devices by type View devices by connection Wi Computer 1 6 CDROM H E Disk drives zi Display adapters ER Floppy disk controllers Hard disk controllers E Imaging Device Pa Infrared devices Modem Monitors H A Mouse E ES Network adapters Other devices fl PCMCIA socket B P4 Ports COM amp LPT LCD LL am m Properties Refresh Remove Print TH lt Scanner and camera gt The Scanners and Cameras icon is registered in the Control panel The scanner driver to be used appears the Scanners and Cameras Properties dialog box To display the dialog box double click this icon For information see the section that explains the settings of the control panel 12 Go to the section 3 3 Installing TWAIN Data Source and follow the procedure 17 3 2 3 Installing for the first time For Windows 2000 1 Connect the scanner to be used to the computer Then
128. tion Ni 7 Dadm On Part Wocannaerl status Device Ready 101 6 3 Event Tab Folder By defining the settings in this folder a specified application can automatically be started for use with a connected scanner However the contents of this tab folder are not displayed for devices that are not supported by this function M4097Ddm Properties E x Device Set About Color Management General Events Diagnosis Device Into gt M4097Odm Scanner events send to this application 1 Imaging amp ScandAall2000 Disable device events Scanner event The operation selected in this list box immediately enables the specified application to automatically start The following operations can be selected but functions may be unavailable depending on the device to be used Auto check of paper supply If paper is set on the ADF Scan button or Start button If the Scan or Start button of the device 15 clicked Send tol 9 If the SendTo button of the device 15 clicked Send to the next application Select the name of the application that can be started by the operation specified in the above list box Multiple specifications are possible For multiple specifications the dialog box for selecting applications to be started is displayed when starting the application Disable event functions If these functions are not used select this check box 102 6 4 Diagnostic Tab Fold
129. tion board is installed in the scanner IPC 3 3D may not be detected normally as it is affected by the version number of the machine type and device In this case IPC2 15 displayed Preview window 100 200 The preview window is used to display the temporary image of read data and for setting the Scanning Area For settings see Scanning Area later in this manual Also see the description of the Preview button later 1n this manual Ruler The large divisions are labeled as Unit The scale also varies with the selected scanner Message line The message line is the bottom line of the dialog in which a brief explanation of an input item or a setting item is displayed when the mouse cursor is moved over the item 47 Data size The approximate amount of data per image when data 15 scanned in the present option Note This value is the amount of uncompressed data The size of the stored file will differ from this value and is usually smaller if image compression 15 chosen and the image is compressed 48 4 4 Setting Information on Image Scanning Current side Duplex Individual Setting Front Back Individual Setting When a scanner that allows duplex scanning is used specifies the page which sets the image scanning information To scan using the same settings as those for Front side and Back side clear the checks in the Individual Setting checkbox on the Front and Back tab
130. tion on Image 5 0 2 0 4 40 40 49 4 5 opecityihg tedio ies Lees 57 4 6 SEUNG SCAMMING ATEA 59 AT SMG 60 MT RN epee ener nme UN UT 61 A122 JOO p EET 64 2 g do 67 A KAMON a a 68 DC 72 AsO Advance 75 MN ee 76 AOZ maoe 79 SCIO 81 4 8 4 When Color is SP CIPIOC cccccccccceeeeeeeeeeeeeeeessseeseeeeeeeeeeeeeeeessesseaaeaaaaseesseeees 84 4 9 Setting the Setting Manager Options 88 410 BasieocanmbDbIdlOg te etico rts i T 91 Downoad Patern 93 5 Using the Gamma Pattern Editor 97 e NN UU Tw 97 5 2 98 05 ne meee mee eta er 99 54 ENG ec
131. to the required document decrease the value set This function can be used if Ram cache 1s selected Ratio of black dots included in the scanning area for blank pages 66 4 7 3 Generic Figure Option dialog Generic Unit Scaling This option selects the unit for the scanning area and preview window One inch 15 calculated as 25 4 millimeters When inches are converted to millimeters values are rounded off Note The TWAIN specifications require that the data width be arranged in units of 32 bits As a result a difference of up to 31 dots can be included depending on the value set 67 4 7 4 Imprinter Endorser Rotation Jab Oache ImprintertEndorser Generic v Enable Imprinter Endorser Cancel Printe Help Offset 0 mm Direction Top to Bottom Counter Counter Initial Value G hcrement Step nc Dec 0 C Decrement Imprinter String Endorsed String ir SMM NDD N bud Sample 2001 03 08 22 42 00000 Figure Option dialog Imprinter Enable Imprinter Endorser Enable Imprinter Endorser Specifies enabling or disabling the imprinter function of the device When the option is selected and scanning has been completed the scanned originals are imprinted according to the instructions below This applies only to the imprinter option Therefore the function
132. tter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled 256 levels 3 internal types can be downloaded Simplified Dynamic Threshold SDTC With image processing option This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 129 Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal Imprinter With imprinter endorser option Reverse side minimum left margin printing position of 20 mm Maximum number of characters to be printed 20 characters Counter display range to 65535 5 digits display Direction Printing Top to Bottom Interface SCSI II Batch Detection Enabled Blank page skip Enabled only when ram cache is used l 0 specified as the endorser print position printing will begin 20 mm from edge of the page 130 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns ADF scanning speed Double sided ADF chuter capacity Document size Supported regular paper Cutout specif
133. urce and follow the procedure 41 3 3 Installing TWAIN Data Source 1 Confirm that the mintport driver has been installed by following the procedure given in Section 3 2 Insert the setup disk into the disk drive Here the CD ROM drive is temporarily labeled D If the current operating environment uses a different label replace the drive label specifications below accordingly Using Explorer locate the install exe file in the D Driver2 Setup folder of the CD ROM drive Then to start installation either double click the file icon or click the icon and press the Enter key If automatic start has been defined the start screen of the setup is displayed Installation can also be started from this screen The installation screen 15 displayed To continue the installation process follow the instructions on the screen e Select the language to be used for installation e In the Select Components dialog box select the check boxes of the components to be installed box at the e Check the Simple explanations related to the selected components are displayed in the bottom installation destination directory To change the installation destination click the Directory Change button and type in the installation destination directory e Click the Continue button to start installation Confirm that the following group has been created when the setup is complete The icons displayed in the windo
134. urve need not be specified because the contrast is adjusted automatically Gamma Curve is not displayed Equal to White Equal to White At conversion to binary this option specifies whether to set the data to black or white when the threshold value and the value of the scanned data are equal This option is not available for IPC 4D Ball Point Pen Mode Ball point pen made When an image made with a pencil or ball point pen is scanned the light reflected from the pencil lead or ink is not uniform As a result part of the image may be missing If the Ball Point Pen checkbox is checked filtering is applied to offset the bright area in the document and compensate for disconnected or faint lines 82 OCR Smoothing Background Removal OCR Smoothing Background Removal The OCR smoothing is the function to make smooth the notched part of line drawing and the Background Removal is the function to remove the uneven background These functions are enabled when it is selected For further information please refer to the User s guide attached to the IPC board since the function to be operated 15 different by the type of IPC At IPC 3 3D Noise Removal and OCR smoothing Background removal is enabled exclusively Noise Removal Noise Removal None m This option automatically removes spots that appear as black stains in a white area and spots that appear as white stains in a black area This opti
135. use cursor If this box 1s checked the gamma pattern input edit box cannot be used and only editing using the mouse cursor is supported Smooth Designates whether to smooth edited curves This setting is only valid when Free Edit is selected In this setting the curved lines drawn by the mouse are automatically smoothed This is reflected in the graph and gradation display Reverse Designates whether to reverse black and white When this box is checked the current output values are converted to 255 output values 100 6 Definition of Scanner and Camera Properties 6 1 Displaying Scanner and Camera Properties Double click the Scanner and Camera icon on the Control Panel to display the corresponding properties dialog box shown below If the minrport driver has been properly installed the scanner driver to be used 15 displayed Select the model name and click the Properties button The dialog box shown below is displayed In this dialog box the scanner driver can be checked and information related to different kinds of related devices can be confirmed An explanation of each tab folder and its use is below 6 2 General Tab Folder General information on the driver for a connected scanner can be displayed and the connection can be tested from this folder M4097Ddm Properties E 2 Device set About Color Management General Events Diagnosis Device Infa M43 Ddm Manufacturer FUJITSU Descrip
136. ute Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm or 297mm x 878 mm with Long Page scannning mode A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled 256 levels 3 internal types can be downloaded Dynamic Threshold SDTC DTC Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Noise removal With endorser option Reverse side minimum left margin printing position of 20 mm 3 Maximum number of characters to be printed 30 characters Counter display range to 65535 at 5 digits display This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used If 0 mm is specified as the endorser print position printing will begin 20 mm from the edge of the page 143 0 to 16777215 at 8 digits display There 1s partly limitations by the revision of the scanner device Direction Printing Top to Bottom Interface SCSI II Wide SCSI Online offset adjustment Enabled Batch Detection Enabled Automatic deskew Enabled Automatic
137. utput resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF chuter capacity Document size Supported regular paper Scanning area specification White level follower Contrast setting Gamma patterns Image processing function Interface Batch Detection Blank page skip Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Xe discharge tube Green 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 800 dpi at steps of 1 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 2 0 sec or less A4 200 dpi 2 pages minute 200 dpi A4 55 kg Maximum 50 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A3 or Double letter sized paper A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Legal Double letter US Executive US Executive Landscape Specified one location Enabled 256 steps 3 internal types can be downloaded simplified Dynamic Threshold SDTC Image processing option installed Edge emphasis Edge extraction Automatic separation Mirror image Reverse image Dynamic Threshold DTC Smoothing Filtering Noise removal SCSI II Enabled Enabled only when ram
138. w depend on the components selected in Select Components during installation Scanner Utility for Microsoft Windows File Edit View Favorites Tools EJ Download Read Me TWAIN Driver pattern editor Help Figure Fujitsu TWAIN group For the gamma pattern editing refer to the section 5 42 3 4 Uninstall The uninstall process removes the software and returns the hard disk to its pre installation state 1 5 Click on Start followed by Settings then Control Panel The Control Panel is then displayed Double click on Add Remove Programs from the icon list of the Control Panel The panel of properties of Add Remove Programs is displayed Select Scanner Utility for Microsoft Windows from the Install Uninstall list Click on the Add Remove button When the confirmation dialog is displayed click on OK if you are ready to uninstall When uninstallation is completed click on OK Note Image files that have been scanned and saved will not be deleted If other TWAIN compliant applications and drivers have been installed and you are asked whether or not to delete files shared with them such as the TWAIN Manager select NO to avoid deleting them 43 3 5 When the scanner is not detected automatically Supplementation During the procedures given in the section 3 2 1 to 3 2 4 if the scanner is not detected automatically immediately after turning th

Scanner Utility for Microsoft Windows Version 9.6 User's Guide

Contents

Download Pdf Manuals

Related Search

Related Contents