AX4E-Centos5.4-Dahdi-User Manual-V1.0-EN
Contents
1. Autogenerated by usr sbin dahdi_genconf on Thu Jul 1 11 33 13 2010 If you edit this file and execute usr sbin dahdi_genconf again your manual changes will be LOST Dahdi Configuration File This file is parsed by the Dahdi Configurator dahdi_cfg Span 1 AXFXSO 0 1 ATCOM GSM WCDMA 0 fxsks 1 echocanceller mg2 fxsks 2 echocanceller mg2 2 fxoks 7 echocanceller mg2 7 fxoks 8 echocanceller mg2 8 Global data loadzone us defaultzone us www atcom cn Email support atcomemail com 6 atcom AXE800PN User Manual After running dahdi_genconf successfully the dahdi channels conf file will get the following configuration Span 1 AXFXSO 0 1 ATCOM GSM WCDMA 0 335 line 1 AXGCOM 0 1 1 FXSKS EC MG2 INACTIVE signalling fxs_ks callerid asreceived group 0 context from pstn channel gt 7 callerid group context default 335 line 2 AXGCOM 0 1 2 FXSKS EC MG2 INACTIVE signalling fxs_ks callerid asreceived group 0 context from pstn channel gt 8 callerid group context default 335 line 7 AXGCOM 0 1 7 FKOKS EC MG2 INACTIVE signalling fxo_ks callerid Channel 7 lt 4007 gt mailbox 4007 group 7 context from internal channel gt 7 callerid mailbox group context default 33 line 8 AXGCOM 0 1 8 FKOKS EC MG2 INACTIVE signalling fxo_ks callerid Channel 8 lt 4008 gt mailbox 4008 group 5 context from internal channel2. gt 8 callerid www atcom cn Email support atcomemail com 7 atcom AXE800PN User Manual mailbox group context default 3 Please run dahdi _cfg vv command root localhost asterisk dahdi_cfg vv DAHDI Tools Version 2 6 2 DAHDI Version 2 6 2 Echo Canceller s HWEC MG2 Configuration 8 channels to configure Setting echocan for channel to mg2 Setting echocan for channel 2 to none Setting echocan for channel 7 to mg2 Setting echocan for channel 8 to mg2 4 Please check if the include dahdi channels conf command line is at the bottom of the etc asterisk chan_dahdi conf file If not users can run the following command to add it root localhost echo include dahdi channels conf gt gt etc asterisk chan_dahdi conf 5 If users want to load the asterisk users can run the following command root localhost asterisk vvge 6 Please run dahdi show channels command You should see 4 channels as the following centos6 CLI gt dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service centos6 CLI gt dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from pstn default In Service 2 from pstn default In Service 7 from internal default In Service from internal default In Service www atcom cn Email support atcomemail com 8 Chapter 6 Reference http
3. www asteriskguru com http www asterisk org downloads http www openippbx org index php title Main_ Page http www atcom cn www atcom cn Email support atcomemail com
4. atcom AXE800PN User Manual ATCOM GSM Card AXE800PN User Manual Version 2 0 2013 12 31 AXE800PN User Manual Release note atcom Version Changed note Editor Date 1 0 First Release Robert 2 0 Release the User manual Deniel 2013 12 31 www atcom cn Email support atcomemail com atcom AXE800PN User Manual Content Chapter 1 the Introduction of AXE800PN Chapter 2 Hardware Introduction Chapter 3 Test Environment Chapter 4 Software Installation Chapter 5 Software Configuration Chapter 6 Reference www atcom cn Email support atcomemail com atcom AXE800PN User Manual Contact ATCOM The Introduction of ATCOM ATCOM is the leading VoIP hardware manufacturer in global market We have been keeping innovating with customer s needs oriented working with partners to establish a total solution for SMB VoIP with IP phone IP PBX and Asterisk cards With over 10 years experience of R amp D manufacturing and service in network and VoIP filed mission of creating the biggest value for IP terminals we commit ourselves in supplying the competitive IP phone and other terminals for IP PBX softswitch IMS NGN providers and carriers supplying the competitive total VoIP solution for SMB market We keep improving the customer s experience and creating the bigger value with our reliable products Until now our VoIP products has been sold to over 60 countries and used
5. by millions of end users Contact sales Address District C east of 2nd floor 3 Crown industry buildings Chegongmiao Industry area Futian district Shenzhen China Tel 86 755 23487618 Fax 86 755 23485319 E mail sales atcomemail com Contact Technical Support Tel 86 755 23481119 E mail Support atcomemail com Website address http www atcom cn Download Center http www atcom cn download html www atcom cn Email support atcomemail com atcom AXE800PN User Manual Chapter 1 the Introduction of AXE800PN Overview of the AXE800PN AXE800PN Asterisk card is an analog card which support 8 FXO FXS ports Using AXE800PN open source Asterisk PBX and stand alone PC users can create their SOHO telephony solution which includes all the sophisticated features of traditional PBX and extended features in IP PBX such as voicemail call transfer call park call pick up call forward bulk SMS sending SMS receiving and so on Features Analog card for Asterisk PBX Support Asterisk PBX zaptel and dahdi driver Support up to 8 FXO FXS analog port Suitable for SOHO PBX VoiceMail IVR Caller ID and Call waiting Caller ID Conference Support Elastix 2 4 0 Trixbox 2 8 0 4 Applications IP PBX IVR system Traditional Calls VoIP Calls Conference Hardware Requirement 500 Mhz Pentium IIIT 64MB RAM 3 3V or 5V PCI 2 2 slot www atcom cn Email supp
6. ort atcomemail com 1 atcom AXE800PN User Manual Chapter 2 Hardware Introduction Motherboard AXE800PN Dual ports FXS module AX 210S Dual ports FXO module AX 210X One FXS port and one FXO port module AX 210XS Splitter SP400 175mm Figure 1 AXE800P AX210S FXS module it supports two FXS ports AX210X FXO module it supports two FXO ports CON1 4 pin power connector SW100 the switch set in the 1 off 2 on state It should plug the power supply extra RJ45 1 Used for connecting a splitter to the card the splitter supports four RJ11 ports and one RJ45 port It s used for module 1 and module 2 RJ45 2 Used for connecting a splitter to the card the splitter supports four RJ11 ports and one RJ45 port It s used for module 3 and module 4 LED Used for checking if the FXS FXO module is detected or not When the FXS FXO ports are detected correctly the LED will be on Wwww atcom cn Email support atcomemail com atcom AXE800PN User Manual Users can choose the AX 210S AX 210X AX 210XS modules according to the requirements One AX 210S module supports two FXS ports one AX 210X module supports two FXO ports and one AX 210XS module supports one FXS port and one FXO port Attention If users want to use FXS or FXO port please make sure the SW100 in the state l off 2 on After doing that please plug the power cable for the card Warning When the PC power is on please do n
7. ot plug or take down the card Figure 2 AX 210S Figure 3 AX 210X Figure 4 AX 210XS Figure 5 SP400 www atcom cn Email support atcomemail com 3 atcom AXE800PN User Manual Chapter 3 Test Environment Test Environment dahdi linux complete 2 6 2 2 6 2 download from ATCOM website asterisk 1 8 7 0 Centos6 0 kernel version 2 6 18 348 3 1 el5 AXE800PN 2 AX210S 2 AX210X www atcom cn Email support atcomemail com atcom AXE800PN User Manual Chapter 4 Software Installation After inserting the card into the PCI E slot and boot the server please run the lspci command to check the PCI E bus compatibility From the correct output users can get the following line If users can not get the above message please power off the server and try to another PCI E slot If it does not help still please try to contact with support atcomemail com 1 To install asterisk and dahdi we have to use yum command to install the following prerequisite packages yum install y bison bison devel zlib zlib devel openssl openssl devel gnutls devel gcc gcc c libxml2 libxml2 devel ncurses ncurses devel If users install the asterisk 11 or over versions please check the following packages yum install y update yum install y bison openssl gcc libxml2 libxml2 dev ncurses dev gawk yum install y sqlite3 libsqlite3 dev 2 Download the dahdi package from the link http www atcom cn dl_ax4g html Attention
8. users need download dahdi package for AXE800PN card from ATCOM website only 3 Install dahdi linux complete package 1 root localhost src tar xvzf dahdi linux complete 2 6 2 2 6 2 tar gz 2 root localhost dahdi linux complete 2 6 2 2 6 2 make 3 root localhost dahdi linux complete 2 6 2 2 6 2 make install 4 root localhost dahdi linux complete 2 6 2 2 6 2 make config 4 Install asterisk 1 root localhost src tar xvzf asterisk 1 8 7 0 tar gz 2 root localhost asterisk 11 2 0 configure 3 root localhost asterisk 11 2 0 make 4 root localhost asterisk 11 2 0 make install 5 root localhost asterisk 11 2 0 make samples www atcom cn Email support atcomemail com 5 atcom AXE800PN User Manual Chapter 5 Software Configuration 1 Please check if the AXE800PN driver has been loaded successfully try to run the command cat proc interrupts And users should get one line with axe4gn 16 42079 467412 IO APIC fasteoi axe4gn If users can not get the axe4gn please try to power off the server and re plug the card into another PCI E slot 2 Please run the dahdi genconf command to configure the etc dahdi system conf file and generate etc asterisk dahdi channels conf file root localhost dahdi_genconf It will not show anything if the command runs successfully After doing that the etc dahdi system conf file will be created as the following configuration
Download Pdf Manuals
Related Search