AT-1 User Manual
Contents
1. 4 Or you can use the PDA or navigation device on a local map software enter the location data Note Note change in location data format T g oar mee ranti Ree Pp aretse voze ones aeees a Feesert wel Pee g awis a he oan 27 LF parm ae Danah me ne z IARA gor L sons i sex D AN weten mgzas st a ante ng otis z mr R panto 7 toa aa 75 RESA H Lom REREN Srt ory ct gt Abas T2e4R Pir E ate ng 3 Single positioning request instructions Product out of default mode in the SMS point to point if you want to switch to GPRS mode press the following command line operation GPSR online mode stored in the three phone numbers 1 2 3 and a 4 bit number of user passwords and do not change as the first step a group of TCP IP server IP address and port number 4 digit password and a GPRS GPRS access point APN number User defined text messages related configuration commands are non volatile content set after the success of the state machine switches from the impact of further changes until the receipt of the relevant instructions or reset operation GPRS online mode conversion Command format 710 user password 4 For example 7100000 Description WhenAT 1 receive the SMS to confirm the user password is correct the switch to GPRS mode After the success of the sender to send confirmation message to the SET MODE OK CURRENT MODE GPRS The produ2. zzz z is the domain of radius 999 9 0 1 in units of KM When theAT 1 receiving the order to confirm the user password is correct to return to the sender to confirm the short message SET GEO FENCE OK and open the electronic fence function Instruction format 2 004 user password E Wddd dddddN Sdd ddddRzzz z For example 0040000E114 10004N22 55705R999 9 Description E E W W N north latitude S south latitude Used in this example is E and N please select the appropriate location according to the actual coordinates of format settings The meaning of the various parts of the sample as follows Eddd ddddd are degrees of longitude 17 information which ddd ddddd that degree Decimal point behind the five followed by zero can not be omitted Ndd ddddd is a degree of latitude in units of information which dd ddddd that degree Decimal point behind the five followed by zero can not be omitted zzz z is the domain of radius 999 9 0 1 in units of KM When theAT 1 receiving the order to confirm the user password is correct Return to sender confirmation short message SET GEO FENCE OK and open the electronic fence function Instruction format 3 005 user password Rzzz z Example 0050000R0 1 Description When theAT 1 receiving the order to confirm the correct user password immediately after reading the latest GPS data and determine the validity of the second is for the A effective is the current latitude and
3. APNPassword GPRS access point settings 804 Password Fixed IP address and port Set IP address and port number 805 Password Sampling intervalT From the number of each clause N From time to time take the car to track mode settings 806 Password Request From Single Location 807 Password X Set the sampling rate history 808 Password 24 From the historical data 24 hours 808 Password From all the historical data 809 Password x y 43 From time to time set the throttle stop mode RESET 0000 Reset all the configuration information after reboot RESTART 0000 Restart device Instruction Explain 700 Password Point to Point mode 710 Password GPRS mode 003 Password E Wxxxx xxxxN Syyyy yyyyRzzz z Fenced area set in degrees minutes 004 Password E Waaa aaaaaN Sbb bbbbbRzzz z Fenced area set in degrees 005 Password Rzzz z Set the fenced area the current location coordinates 100 Password Power saving features 122 Password x Set the speed alarm 150 Password Close Caller 151 Password Open calling 210 Password Close fence detection 211 Password Open fence detection 222 Password Open GPS 333 Password Close GPS 4xx Password From time to time point to point mode 666 Password Location to return a single user ID 777 New Password Old Password Change Pa
4. For example 7 000 000 Description WhenAT 1 receive the SMS to confirm the user password is correct the switch to SMS application mode After the success of the sender to send the confirmation to the SET MODE OK CURRENT MODE SMS P2P 2 1 1 Single positioning request instructions Command format 666 user password 4 example 6 660 000 Description When theAT 1 receiving the order confirm the user password is correct read the GPS information regardless of the validity of the original software set it with the base station with return return to the sender Data format Lat latitude latitude value precision after the decimal point 5 Long longitude direction longitude value precision after the decimal point 5 Speed speed KM H precision after the decimal point 2 Direction Heading accurate to two decimal places Date Date YY Y Y MM DD Time Time HH MM SS GMT BS base station information FIX Position Status A V ID IMEI STATE Information Status Valid data sample Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25eeOdff Fix A ID 353686009002030 STATE SMS Invalid sample data Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25eeOdff Fix V ID 353686009002030 STATE SMS Note If the cold start and the GPS does not locate then return invalid information as shown below
5. Igarin gicp net 123 0000 Description When the device receiving the order to confirm the user password is correct the automatic restart and automatically log on FTP address of the server download When the update again after a successful reboot into normal use Note FTP address length 5 35 can also domain names letters numbers dot Underscore _ and hyphen form User name FTP server user name length 3 20 password for the FTP server password length 3 20 User name and password respectively numbers and letters FTP server to clients on their own settings upgrade to the product documentation please consult your dealer 5 GPSR products online mode settings and advanced applications 25 5 1 1 Change Password command Command format 777 new password 4 Old Password 4 For example 77712340000 Description to confirm the old password is correct update the user password for the new user password set up after the success of confirmation to the sender to send a short message Content for the SET USER PASSWORD OK 5 1 2 GPS status is set to command Send SMS commands make GPS work in open close adaptive three states GPS factory set or reset for the normal open state 1 open the GPS instruction Instruction format 222 user password 4 For example 2 220 000 Description When theAT 1 receiving the order confirm the user password is correct open the GPS power after the success of the sender to se
6. 808 0000 24 Note When receiving the order confirmationAT 1 user password is correct return to sender confirmation message START UPLOAD 24H HISTORY RECORD Sent to the server while starting the last 24 hours recorded in historical data format and GPRS From time to time under the same model as shown in 3 2 16 the information in the state prompted the STORAGE B Read all the data records Instruction Format 808 0000 Description When receiving the order confirmationAT 1 user password is correct return to sender confirmation message START UPLOAD ALL HISTORY RECORD Also sent to the server storage area began to record all the historical data as shown in formats such as 3 2 16 Information in the state prompted the STORAGE 5 1 14 Low voltage Upload When theAT 1 working voltage when below the set value then regarded as 3 2 16 command processing and an increase in the data state LP key supporting characterization of the current state Were made three times each time interval of 1 minute 5 1 15 Change the time zone settings instructions Command format 896 user password 4 D NN example 8960000E08 36 Description One user password for the four D values of E W that the time zone thing NN is a two digit 1 12 that when code When the product after receipt of order confirm the user password is correct after the success of products set to sender send a confirmation SMS TIME ZONE SET OK CURRENT DN
7. Cases ERROR GPS GPRMC FRAME DATA BS 27971054 ID 353686009002030 STATE SMS Note If the cold start and the GPS does not locate then return invalid information is shown below Eg GPS UNAVAILABE PLEASE TRY AGAIN LATER 2 1 2 Show Location on Map 1 Download Google Maps software from http earth google com HRN 8 oT 442 14S oT E 22 eee soe DESSERTE E ALET O 2 22 29 ers soist 2 Start Google Maps software for more information on the Google Maps software please refer to http earth google com as shown above Note change in location data format or you can copy http maps google com in the Internet browser to connect Google Maps site shows location map 3 send 666 code SMS command to theAT 1 have latitude and longitude data Enter your latitude and longitude received from the SMS and click the search button Google Maps will show you the location map For example When you receive the information transmitted from tracker as follows Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25eeOdff Fix A ID 353686009002030 STATE SMS Find locations in Google Maps enter in the appropriate location 22 50500 114 01000 Obtain the following picture Fle ER View Tools Aad be fins Gusrecens Orections Fly ioeg New fort NY 22 S0500 114 01000 Select this toleler ana click on the Pisy tuhon ehd to stort gt Ee 11401000
8. E114 10004N22 55705 E115 10006N23 55706 Note GX said the electronic fence X X range 1 16 IO fencing in and out of all alarms I selected as a finalist alarm O as a fence alarm Latitude and longitude values in degrees decimal point to be retained after five followed by zero can not be omitted IO fences are out of the alarm I Finalist bar alarm O a fence alarm When the device receives the instruction to confirm the user password correctly the sender returns confirmation messages SET SQUARE GEO FENCE GX IO I O OK Note 1 is set up automatically open the fence then the default fence type I0 out of the fence are the police 2 If the calling state is off it will not make calls SMS mode only send messages to the user 3 The setting of this directive and the switch from power down effect of changes until you receive further instructions or reset operation 4 After reset the value of latitude and longitude marked with 0 Fence is turned off 2 1 gt Open rectangular electronic fence Open all rectangular electronic fence instruction format 311 user password Eg 3100000 Electronic fence off a single rectangular Format 310 user password GX Eg 3100000G5 Description This command is used to open all the electronic fence and open a single rectangular rectangular electronic fence GX means that an electronic fence X X range 1 16 When the device receives the instruction correctly recognized the user
9. achieve power saving purposes Such as setting 1990000S030L01HO03 sending 188 to enter this mode the device according to the 199 instruction set turn off the GPS 30 S030 minutes and then open the 1 minute L01 if the GPS in the open for 1 minute L01 localization directly off GPS 30 min S030 If a minute L01 27 did not locate will continue to open the GPS 2 min HO3 L01 2 minutes regardless of whether the GPS positioning all will be closed again for 30 minutes again and again Note 1 switch to power saving mode GPS work you must first set the command parameters 199 3 Open the power saving mode off the stage in the GPS GPRS sampling time and historical data are uploaded will stop open stage in the GPS if the positioning GPRS uploaded regularly and historical data sampling will be back to normal 3 Open the power saving mode the GPS off stage whether text mode or GPRS mode the location information if the request operations such as 666 806 phone positioning SOS 4XX then the GPS would be immediately Open read the latest GPS data until the arrival of the next power cycle and then turn off GPS 4 If you need real time tracking please use the GPS normally open mode 5 1 3 Single positioning request instructions Command format 666 user password 4 Example 6 660 000 Description When theAT 1 receiving the order confirm the user password is correct read the GPS information regardless of the validi
10. effect When you receive the confirmation code 188 instructions correctly to switch to GPS mode power saving mode the sender replies to the confirmation message GPS AUTO MODE ON OK After entering power saving mode the device 199 in accordance with the parameters set by instruction time switch GPS in order to achieve power saving purposes Such as setting 1990000S030L01H03 sending 188 to enter this mode the device according to the 199 instruction set turn off the GPS 30 S030 minutes and then open the 1 minute L01 if the GPS in the open for 1 minute L01 localization directly off GPS 30 min S030 If a minute L01 did not locate will continue to open the GPS 2 min HO3 L01 2 minutes regardless of whether the GPS positioning all will be closed again for 30 minutes again and again Note 1 switch to power saving mode GPS work you must first set the command parameters 199 2 Open the power saving mode off the stage in the GPS GPRS sampling time and historical data are uploaded will stop open stage in the GPS if the positioning GPRS uploaded regularly and historical data sampling will be back to normal 3 Open the power saving mode the GPS off stage whether text mode or GPRS mode the location 14 information if the request operations such as 666 806 phone positioning SOS 4XX then the GPS would be immediately Open read the latest GPS data until the arrival of the next power cycle and then turn off GPS 4 I
11. invalid data upload After the success confirmation to send the short message INVALID DATA UPLOAD ON at this time whetherAT 1 GPS data received is valid will be uploaded to the server X 0 close the upload invalid data set after the success of the short to send the confirmation message INVALID DATA UPLOAD OFF then close the invalid data upload only upload valid data Note The factory set or reset the state to stop after the upload invalid data the instruction set of the state not switch until it received the relevant instructions to change again or reset operation Note 1 this function is only valid in the GPRS mode 2 default is OFF 5 1 20 Call limit switch instructions Open the command limit calls 170 user password for example 1 7 Call restriction off command 171 user password for example 1 710 000 Description When the device receives the call limit open command confirm the user password correctly send the number of replies to the confirmation message SET UNLIMITED MODE OFF OK Equipment can only receive 3 to play back the stored phone numbers non stored numbers hang up incoming calls directly without any treatment limit close calls when the device receives instructions to confirm the user password correctly to send a number reply to confirmation message SET UNLIMITED MODE ON OK Device can receive any phone call back the phone Note The 39 factory set or reset state after the open 5 1 21 Aut
12. longitude information extracted coordinates of center of a circle as the fence and to R value of the radius while open electronic fence a successful return after the first sending confirmation SET GEO FENCE OK GPS data is invalid if the date is to give up continue to receive the next one if 50 seconds have not received valid data then return to the sender to send reminder ERROR GPS DATA TRY AGAIN LATER After the GPS set to resume their original state on off adaptive Note 1 Fences can not exceed the radius of its domain the fractional part of the right to a value of zero must enter zeros For example R 1 must be entered as 1 0 2 If the calling state is off it will not make calls send text messages to pre existing users only 3 Degrees and is divided into 60 binary conversion that 1d 60m 2 Open the Geo fence 211 user password When the AT 1 receiving the order to confirm the user password is correct to open the electronic fence to return to the sender to confirm the short message GEO FENCE ON 3 Close E fence 210 user password When theAT 1 receiving the order to confirm the user password is correct closed electronic fence to return to the sender to confirm the short message GEO FENCE OFF 18 2 gt set the rectangular range of the electronic fence Format 006 user password GX IO I O E W longitude limit N S latitude limit E W longitude limit N S latitude lower Eg 0060000G1 IO
13. normal NORMAL BS base station information to return the number of GEO FENCE ON OFF longitude longitude latitude latitude R radius minimum 0 1KM GEO FENCE STATE RS OS DEFENCE ON OFF power failure alarm switch VOICE ON OFF switch calling POWER ON OFF power switch off oil RATE XX speeding baseline ST location information request interval timer TN SMS mode timer request number 40 INVALID UPLOAD Invalid Data From switch MOVE displacement of the alarm radius displacement alarm switch ACC PROMPT ACC switching state switch GU GPRS user name password SRV Server IP address port number APN GPRS access point APN User Name APN password SAMP From the sampling interval first upload a few articles go cart track uploaded regularly mode SAMP2 From the sampling interval first upload a few articles uploaded regularly stop throttling mode HISTORY SAMP History By sampling interval 4 Read the current number and password SMS command format GTAN Function When the module receives instructions return the module all the numbers and passwords stored including the service center number and password the user number and password Data Format U1 Number 1 password U2 Number 2 password U3 No 3 password SC Service Center number service code 6 2 The state labeled Status Corresponding identity 666 single request SMS 4XX regularly
14. not be greater than 1000 ZZ between the values proposed 1 20 when the device receives the command make sure the correct user password immediately after reading the GPS information recognition information valid send the current location of the Google Maps screenshot of the website you set the capture resolution of the resolution Screenshots URL example http maps google com staticmap center 22 554765 114 104716 amp zo0om 16 amp size 240x240 amp maptype mobile amp markers 22 554765 114 104716 bluea amp sensor false amp hl cn 4 1 15 Single Location Google Maps link instruction to return Format 669 user password for example 6 690 000 Description When the device receives the command make sure the correct user password immediately after reading the GPS information recognition information is valid send the current location of the Google Maps link to the number and user available through your PDA or smart mobile Internet Google Maps view in the current location URL Example 23 http maps google com maps f g amp hl en amp q 22 554765 114 104716 amp ie UTF8 amp z 16 amp iwloc addr amp om 1 Note The above three commands if sent in the past not on the server connection or other reasons not connected the reply 1 If the connection is not on the server the reply SEVER BUSY PLEASE TRY AGAIN LATER 2 If there is no GPS location then the reply GPS UNAVAILABE PLEASE TRY AGAIN LATER 3 for domestic policy reas
15. password change Instruction Format 802 service password user password new password old services Such as 802 0000 1111 0000 Description WhenAT 1 receiving the order confirm the user password and the old service password is correct Update Service password for new service password set up after the success of confirmation to the sender sends a short message CHANGE PASSWORD OK 5 1 6 From here instructions immediately Instruction Format 806 user password Example 806 0000 Description WhenAT 1 receiving the order confirm the user password is correct the first stored number to send a confirmation SMS START GPRS UPLOAD sent to the server while the current store of data From the data in the state prompted for the SMS Upload format IMEI number service password user name Status data Base Station Information GPRMC Base Station Information GPRMC Such as 12345678900000 1 SR 6869BE 0000 S MS 3 25ee0dff GPRMC 083945 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E 25ee0dff GPRMC 083950 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E 25ee0dff GPRMC 083955 180 A 2233 4249 N 11406 0046 E 0 00 315 00 251207 A 6E Note The data format immediately upload status SMS 5 1 7Calling switch instruction Calling off instruction format 150 user password For example 1500000 Calling open instruction format 151 user password For exampl
16. password to open the electronic fence sender rectangular return confirmation messages Open all rectangular electronic fence resume SET ALL SQUARE GEO FENCE OFF open a single rectangular electronic fence is SET SQUARE GEO FENCE GX OFF 19 Note If you set multiple alarms occurred while rectangular enclosure the priority call G1 fence fence G2 G3 G4 only to send the relevant location information not make the call Factory configuration and reset the default state for the RS Attention Set of three ways of electronic fencing Choose one when the product after receipt of the electronic fence electronic fencing instruction set feature automatically opens When turned off the electronic fence is open again after the previous set are still valid 4 1 9 Speed alarm Instruction Format 122 user password X Example 122 0000 250 Note X is the speed reference value the data type integer in units of km hour KM H the domain of 0 999 When theAT 1 receiving the order to confirm the user password is correct it will set the speed reference value X X 0 IN close the speed alarm function X 0 speed alarm function is turned on after the success of the first stored user to send a confirmation information SET RATE LIMIT X When the speed alarm function is turned on AT 1 began to read the speed of GPS data and comparison with X real time If the GPS speed is greater than in X the instructions at t
17. sent TIMER Phone Location CALL Answer ANSWER Seek help SOS Power failure alarm alarm DEF A fence OS Finalists selected RS Speed alarm OVERSPEED Safe speed SAFESPEED Historical Data Upload STORAGE Low voltage alarm LP 41 806 single hair positioning SMS From time to time to go car track AUTO From time to time stop throttling AUTOLOW 6 3 List of products manufactured state Configuratio Status Configuration Status Configuratio Status n items items n items Mode Point to Stored phone Air Password 0000 Point GPS Status Open Time to send Stop The number 1 of base stations Power Off Electronic fence Close Calling Open failure alarm disarm switch Service Air GPRS 0000 GPRS user V500 center Password name number ANP CMNET IP Address 0 0 0 0 0000 Shift alarm Close Calling Open Off petrol and Open non off petrol Speed alarm Close switch electricity and electricity Historical Stop Historical Data Stop Parking Stop data Upload throttle sampling upload ACC switch Open Upload invalid Close Go cart track Close state tips data upload 6 4 Instruction Set 42 Instruction Explain 700 Password Point to Point mode 710 Password GPRS mode 003 Password E Wxxxx xxxxN Syyyy yyyyRzzz z Fenced area set in degrees minutes 004 Password E Waaa aaaaaN Sbb bbbbbRzzz z Fenced area set
18. size in which the representative picture of the width of the WWW HHH representative of the image height can be set to comply with the resolution of the size of your phone Note that this is not the value of 2 can be larger than 1000 when the device receiving the order confirm the user password is correct and immediately read the GPS information recognition information is valid send the current location on Google Maps screenshot of the site the screenshot resolution you set the resolution Screenshots URL example http maps google com staticmap center 22 554765 114 104716 amp z00m 16 amp size 240x240 amp maptype mobile amp markers 22 554765 114 104716 bluea amp sensor false amp hl cn 4 1 18 Single Location Google Maps Link command to return Instruction format 669 user password example 6 690 000 Description When device receiving the order confirm the user password is correct and immediately read the GPS information recognition information is valid send the current location on Google Maps link to the number then the user through your PDA or smart phone access view in Google Maps here Website Example http maps google com maps f g amp hl en amp q 22 554765 114 104716 amp ie UTF8 amp z 16 amp iwloc addr amp om 1 Note Due to domestic policies so if in the country the map will be biased 4 1 19 Automatic Update command Command format User password FTP address user name password for example 0000
19. such as TIME ZONE SET OK CURRENT E8 Such as setting 8960000E08 set the time and after the success of all relevant data to the GPS receiver on the basis of time plus 8 set 896000W07 set the time and after the success of all relevant data to the GPS receiver based on the reduction of time 7 Default output Greenwich time if you set the parameters of NN for the 00 cases product recovery output GMT 5 1 16 Single Orientation return address instruction in Chinese Instruction format 1 667 user password for example 6670000 Instruction format 2 667 user password MAP example 6670000MAP Instruction format 3 667 user password MAP WWW HHH ZZ Example 6670000MAP 640 480 15 Description When device receives instruction 1 and confirm the correct user password immediately after reading the GPS information recognition information is valid send the address information to send the number of Chinese Such as King East Road Shenzhen Guangdong Poly Garden East Gate south 339 degrees east within a distance of 31 meters Send commands 2 will return a URL open the URL you can see the current location and a current position of the shots screenshots default size is 240 320 EG http www gps069 com cngps mapaddr asp Ing 114 09998klat 22 55709 amp z 15 amp w 240 amp h 320 If you think the default screenshot is too small you can send commands 3 you can customize the size and scale the screenshot WWW is the width of the ima
20. 1990000S030L01H03 Description S030 that off GPS 30 minutes and can be set 1 255 Open the GPS that the first phase of LOI is 1 minute can be set 1 98 the first stage if the second stage is not positioned directly off GPS if not positioning the first stage the second phase H03 GPS represents the total time for the opening that the second phase of 2 minutes ie Hzz Lyy you can set 3 99 When S 13 is set to 0 then exit the power saving mode automatically switches to the GPS normally open mode that is 188 command will not work When the module receives the instruction to confirm the user password is correct according to the user to set parameters to configure the S L H items after the success to send the confirmation message GPS AUTO MODE yy zz xxx Minutes Note 1 Set S L H and other parameters if the high is 0 then we must make zero For example To turn off gps30 minutes will set the S030 but not set to 30 2 Hzz opened GPS to set the total time not less than Lyy 3 199 instruction set of the parameters are not lost restart the reset will not change until reset 4 Only in exceptional power saving mode the device can be set in accordance with the parameters of the timer switch 199 GPS other modes will not 2 Special power saving mode is on Instruction format 188 user password for example 1880000 Description 199 instruction set when the device is successful send 188 commands to take
21. AT 1 Mini Personal GPS Tracker GPS SMS GPRS Technical Manual 1 1 Introduction AT 1GPS Tracker is the world s smallest surface of a personal remote positioning tracking devices based on GPS technology and GSM GPRS technology made of Access to the user via SMS latitude and longitude location information and then in Google Maps or other mapping software found on the user s location or tracking device positioning data uploaded via GPRS to a designated server the user query through the Internet real time location tracking devices historical trajectory The product is compact stylish dynamic in caring for the elderly children best also be used for the protection of property tracking animals and other fields 1 2 Features High performance GPS chipset built JRC In weak signal conditions can pinpoint in urban canyons and other areas with limited sky view can be good work Built in GSM GPRS module support GSM900 1800MHz 850 1900 optional to do can work worldwide Support the SMS communication or GPRS TCP connection can be to receive location information by SMS or the Internet to view trajectory With SOS help function electronic fence function remote monitoring historical data upload uploaded regularly and so on Main technical indexes meet the international standard GSM mobile phones portable compact low power dynamic fashion 1 3 Specification Hardware GSM Module MTK program GSM 900 1800 850 1900 du
22. al band or quad band support for TCP protocol GPS Chip JRC High sensitivity GPS chipset GPS Sensitivity 164dBm GPS Frequency L1 1575 42MHz C A Code 1 023MHz Passage 210 channel full track Location accuracy 2 5m CEP Speed Accuracy 0 1 m s Time accuracy 1 us and the GPS time synchronization Coordinate system WGS 84 Regain Average of 0 1 s Hot start Average of s Warm Start Average 30 s 2 Cold start Average 38 s Height restriction Maximum 18 000 meters 60 000 feet Speed limit The fastest 515 m s 1000 section Acceleration limit Less than 4g Operating Temperature 25 C to 70 C Humidity 5 95 No coagulation Size 50mm 44mm 16mm Battery and Voltage 1200 mAh Rechargeable battery 3 7V Charger DC 5V 2 1 Structure 2 2 LEDLED status description 1 Blue LED instructions GSM signal state Status Meaning No SIM card or no GSM network Flash Flash once every 8s GSM The receiver works well and the standby 2 Red LED charging instructions like Status Meaning Always Charging Micro light Charging complete 3 Green LED direct GPS signal status Status Meaning Does not shine GSM indicator light of Work but did not locate the circumstances Slow flash Work has been positioning Tip How to get a better GPS signal
23. an order of work and timely response to users it is recommended to set the time do not upload more than minute sampling interval sample article that number is greater than 60 2 the settings are not regularly upload affected by the switch machine until once again received the relevant instructions to change or reset operation 3 blind repay up to 300 back up data more than 300 new data will automatically overwrite the first backup data Note From time to time setting from Off to the impact of functional limitation but by the GPS power if power saving features turned on products in the power saving state to stop upload location data the GPS power saving features can be found in the following applications GPRS high level The details Do the three step basic setup you can operate in the service of products for you to monitor the platform to see their vehicle running track monitor the movements of the vehicle Advanced Applications 4 SMS point to point mode set projects and advanced applications 4 1 1 Change Password command Command format 777 new password 4 Old Password 4 For example 77712340000 Description to confirm the old password is correct update the user password for the new user password set up after the success of confirmation to the sender to send a short message Content for the SET USER PASSWORD OK 4 1 2 GPS status is set to command aa bP Send SMS commands make GPS work in open close ada
24. ct location data uploaded to the Internet three major steps 1 Set the GPRS Access Point Access Point Name 10 Instruction format 1 803 user password APN example 803 0000 CMNET directive format 2 803 Password APN APN Username Password APN Note 1 different GSM GPRS service providers to offer a different APN please according to the local service provider s APN to choose to use the instruction format or format 2 instruction set Note 2 When theAT 1 receiving the order confirm the user password is correct update GPRS access point for the new access point set up after the success of confirmation to the sender to send a short message If the sender is the instruction format 1 the return confirmation message SET GPRS APN OK If you send the order form 2 back to confirm the information SET GPRS ACCOUNT OK Note APN factory set or reset to CMNET APN for 3 to 35 letters numbers dot Underscore _ and hyphen formed characters APN APN username user and password respectively 3 to 20 characters consisting of numbers and letters such as the need to change in domestic use 2 Set the TCP IP server IP address and port number Instruction Format 804 user password fixed IP address port example 804 0000 222 125 12 32 80 Note WhenAT 1 received the order confirm the user password is correct and update the internal saveAT 1 The IP address and port number set up afte
25. current position of the shots screenshots default size is 240 320 EG http www gps069 com cngps mapaddr asp Ing 114 09998klat 22 55709 amp z 15 amp w 240 amp h 320 If you think the default screenshot is too small you can send commands 3 you can customize the size and scale the screenshot WWW is the width of the image HHH for the picture height ZZ for 22 the zoom level Note WWW HHH s value is less than 1000 ZZ between the values proposed in the 1 20 adjust the ZZ can adjust the zoom level shots Such as http www gps069 com cngps mapaddr asp Ing 114 09998 amp lat 22 55709 amp z 15 amp w 640 amp h 480 4 1 14 Single shot Positioning links to Google Maps to return instructions Instruction format 1 668 user password for example 6680000 instruction format 2 668 user password WWW HHH ZZ example 6680000 999 999 15 Description When the device receives the instruction 1 verify that the correct user password immediately after the read GPS information recognition information is valid send the current location of the Google Maps screenshot of the website the screenshots default resolution of 240 320 If you think that image is too small you can send commands 2 custom picture size in which the representative picture of the width of the WWW HHH on behalf of picture height ZZ for the zoom level you can set the size to comply with the resolution of your phone Note WWW HHH these two values can
26. e 1 510 000 Description When theAT 1 before calling the relevant instructions to confirm the user password is correct close the calling features including the SOS distress power alarm calling fence alarm calling speed alarm etc after the success of the sender to send the confirmation to the SET VOICE CALL OFF When theAT 1 before calling open order confirm the user password is 30 correct open the calling features including the SOS distress power failure alarm calling fence alarm calling speed alarm etc after the success of the sender to send confirmation message to the SET VOICE CALL ON 5 1 8 Phone Upload Description When stored in one of three telephone calls come in to locate numbers and 2 5 in the sound of ringing after the hang then regarded as 3 2 16 command processing the status prompt for the CALL 5 1 9 Monitoring functions Instruction format 00X user password For example 0000000 Description When the device receives the order confirmation the user password is correct according to the value of X set the handset switch state X 1 the handset closed the monitor mode After the success the sender should send the confirmation messages SET PROFILE OK CURRENT PROFILE SILENT Handset is turned off if the stored user phone calls in does not follow any prompts in about 10 seconds after the automatic answer the user can listen to the sound track side but the track side can not hear the voic
27. e next one if 50 seconds have not received valid data then return to the sender to send reminder ERROR GPS DATA TRY AGAIN LATER After the GPS set to resume their original state on off adaptive Note 1 fences can not exceed the radius of its domain the fractional part of the right to a value of zero must enter zeros For example R 1 must be entered as 1 0 2 if the calling state is off it will not make calls send text messages to pre existing users only 3 degrees and is divided into 60 binary conversion that 1d 60m 2 Open the e fence 211 user password When theAT 1 receiving the order to confirm the user password is correct to open the electronic fence to return to the sender to confirm the short message GEO FENCE ON 3 Close E fence 210 user password When theAT 1 receiving the order to confirm the user password is correct closed electronic fence to return to the sender to confirm the short message GEO FENCE OFF 2 gt set the rectangular range of the electronic fence Format 006 user password GX IO I O E W longitude limit N S latitude limit E W longitude limit N S latitude lower Eg 0060000G1 1O E114 10004N22 55705 E115 10006N23 55706 33 Note GX said the electronic fence X X range 1 16 IO fencing in and out of all alarms I selected as a finalist alarm O as a fence alarm Latitude and longitude values in degrees decimal point to be retained after five followed by zero can n
28. e of the client X 0 turn on the handset as the normal mode After the success the sender should send the confirmation messages SET PROFILE OK CURRENT PROFILE NORMAL If the stored user opens the handset phone call came in there will be a tone about 10 seconds after the automatic answer the two sides can make a call 5 1 6 instructions are treated as processing which automatically updates the information state entries STATE ANSWEER Non stored phone number incoming call directly to hang up Note The factory set or reset state after the handset open non listening state 5 1 10 Emergency upload Description When the regular press SOS button more than 3 seconds then regarded as 5 1 6 command processing the status prompt for the SOS Stored at the same time the first phone call if not successful or not turned off then in turn call the second third If any of the stored numbers connected can remotely monitor Note If the calling state is off it will not make calls only sending data to the server 3 5 1 11 Electronic fence function Electronic fence is to set the coordinates for the center of the circle set the radius to determine the scope of the fence When turned on set after theAT 1 beyond the scope of the fence immediately sent to the server 3 2 16 format of location information Information in the state prompted to OS Also call a telephone number stored in the first If unsuccessful shutdown or not connected
29. eOutdoor eAT 1 charging port down to stand up 2 3 Key function description Button Meaning Power Saath Long by 3 5s Off short press to hang up incoming calls Long press the button for 3 seconds sending location information to the SOS stored telephone numbers of 3 users upload or through GPRS location button information to the server 2 4 Annex e AT 1 host a eTravel charger or car charger e USB Charging Cable Subsidiary of the CD manual 2 5 Install SIM card 1 select the SIM card You can use a local moving company s SIM card support for SMS GPRS features and has enough balance 2 open the device shell the special SIM card into SIM card slot and lock 2 6 battery before using the AT 1 in order to extend battery life it is recommended in the first three will be turned off after use electricity is fully charged to 12 hours 4 Note DC charging port can only be used to do Do not take other equipment in order to avoid product damage 2 7 Power on off boot Hold down the power button and wait while some 3s and release blue lights flashing green light after a few seconds indicating the machine starts Shutdown Hold down the side of the boot after the power button and wait for about 3s When the LED goes out that equipment has indeed turned off Specific Application When you read the brief description of the product the product has been installed SIM card already insta
30. earliest recorded data 3 if the power saving feature is turned on and theAT 1 a long time at rest then history will automatically shut down until theAT 1 is awakened and opened the GPS 2 Set of historical data upload instructions A From 24 hour history Instruction Format 808 user password 24 Example 808 0000 24 Note When receiving the order confirmationAT 1 user password is correct return to sender confirmation message START UPLOAD 24H HISTORY RECORD Sent to the server while starting the last 24 hours recorded in historical data format and GPRS From time to time under the same model as shown in 3 2 16 the information in the state prompted the STORAGE B to read all data records Instruction Format 808 0000 Description When theAT 1 receiving the order to confirm the user password is correct return to sender confirmation message START UPLOAD ALL HISTORY RECORD Also sent to the server storage area began to record all the historical data as shown in formats such as 3 2 16 Information in the state prompted the STORAGE 4 1 11 Low voltage alarm When theAT 1 operating voltage lower than the set value read the GPS information regardless of the validity of the three numbers stored immediately sent to the 3 1 5 format location information 21 including information on status items automatically update STATE LP Were sent three times each time interval of 1 minute 4 1 12 change the t
31. enclosure the priority call G1 fence fence G2 G3 G4 only to send the relevant location information not make the call Factory configuration and reset the default state for the RS 34 Attention Set of three ways of electronic fencing Choose one when the product after receipt of the electronic fence electronic fencing instruction set feature automatically opens When turned off the electronic fence is open again after the previous set are still valid 5 1 12 Speed alarm Instruction Format 122 user password X Example 122 0000 250 Note X is the speed reference value the data type integer in units of km hour KM H the domain of 0 999 When theAT 1 receiving the order to confirm the user password is correct it will set the speed reference value X X 0 IN close the speed alarm function X 0 speed alarm function is turned on after the success of the first stored to send confirmation information SET RATE LIMIT X When the speed alarm function is turned on AT 1 began to read the speed of GPS data and comparison with X real time If the GPS speed is greater than in X the instructions at this time for speeding AT 1 a 3 2 16 immediately sent to the server location information formats information in the state prompted the OVER SPEED speeding alarm if it detects the speed of GPS in less than X it indicates the speed at this time to return to a safe speed driving AT 1 immediately 3 2 16 serve
32. epresents the total time for the opening that the second phase of 2 minutes ie Hzz Lyy you can set 3 99 When S is set to 0 then exit the power saving mode automatically switches to the GPS normally open mode that is 188 command will not work When the module receives the instruction to confirm the user password is correct according to the user to set parameters to configure the S L H items after the success to send the confirmation message GPS AUTO MODE yy zz xxx Minutes Note 1 Set S L H and other parameters if the high is 0 then we must make zero For example To turn off gps30 minutes will set the S030 but not set to S30 2 Hzz opened GPS to set the total time not less than Lyy 3 199 instruction set of the parameters are not lost restart the reset will not change until reset 4 Only in exceptional power saving mode the device can be set in accordance with the parameters of the timer switch 199 GPS other modes will not 2 Special power saving mode is on Instruction format 188 user password for example 1880000 Description 199 instruction set when the device is successful send 188 commands to take effect When you receive the confirmation code 188 instructions correctly to switch to GPS mode power saving mode the sender replies to the confirmation message GPS AUTO MODE ON OK After entering power saving mode the device 199 in accordance with the parameters set by instruction time switch GPS in order to
33. er password E Wddd dddddN Sdd ddddRzzz z For example 0040000E114 10004N22 55705R999 9 Description E E W W N north latitude S south latitude Used in this example is E and N please select the appropriate location according to the actual coordinates of format settings The meaning of the various parts of the sample as follows Eddd ddddd are degrees of longitude information which ddd ddddd that degree Decimal point behind the five followed by zero can not be omitted 32 Ndd ddddd is a degree of latitude in units of information which dd ddddd that degree Decimal point behind the five followed by zero can not be omitted zzz z is the domain of radius 999 9 0 1 in units of KM When theAT 1 receiving the order to confirm the user password is correct Return to sender confirmation short message SET GEO FENCE OK and open the electronic fence function Instruction format 3 005 user password Rzzz z Example 0050000R0 1 Description When theAT 1 receiving the order to confirm the correct user password immediately after reading the latest GPS data and determine the validity of the second is for the A effective is the current latitude and longitude information extracted coordinates of center of a circle as the fence and to R value of the radius while open electronic fence a successful return after the first sending confirmation SET GEO FENCE OK GPS data is invalid if the date is to give up continue to receive th
34. f you need real time tracking please use the GPS normally open mode 4 1 3 time to send location information instruction Instruction format 4 xx user password 4 For example 4010000 Description which is a 0 9 X that figure when XX is less than 60 its unit is minutes when XX Large at 60 its value is XX minus 60 the unit is the hour that is 61 to 1 hour 62 for 2 hours and so on When theAT 1 receiving the order confirm the user password is correct AT 1 set the current time as the initial time of time XX for the interval to confirm the sender s mobile phone to send text message TIMER START REPEAT INTERVAL lt X gt MINUTES Then start basic value of the initial time of time when the arrival time interval X X 3 1 1 format to send location information including information on status items automatically update STATE TIMER When XX is 00 the cancellation of regularly sending location instructions to confirm the sender s mobile phone to send text message TIMER STOP Note The current version of the maximum time interval can not exceed 2 hours For a longer time please let me company specially customized for you From time to time functional limitations by the GPS function when the GPS power saving features turned on GPS is in sleep mode at this time regularly uploading invalid and will not upload 4 1 4Calling switch instruction Calling off instruction format 150 user password For example 1500000 calling open instruction
35. format 151 user password For example 1 510 000 Description When theAT 1 before calling the relevant instructions to confirm the user password is correct close the calling features including the SOS distress power alarm calling fence alarm calling speed alarm etc after the success of the sender to send the confirmation to the SET VOICE CALL OFF When theAT 1 before calling open order confirm the user password is correct open the calling features including the SOS distress power failure alarm calling fence 15 alarm calling speed alarm etc after the success of the sender to send confirmation message to the SET VOICE CALL ON 4 1 5 Phone positioning function Note When the stored one of the three phone numbers of calls come in and hang up after ringing sound 2 5 then the call number to send the location information such as 3 1 1 status information tips for the STATE CALL Non stored phone numbers hang up incoming calls directly without any treatment 4 1 6 Monitoring functions Instruction format 00X user password For example 0000000 Description When the device receives the order confirmation the user password is correct according to the value of X set the handset switch state X 1 the handset closed the monitor mode After the success the sender should send the confirmation messages SET PROFILE OK CURRENT PROFILE SILENT Handset is turned off if the stored user phone calls in does not foll
36. ge HHH for the picture height ZZ for the zoom level Note WWW HHH s value is less than 1000 ZZ between the values proposed in the 1 20 adjust the ZZ can adjust the zoom level shots Such as http www gps069 com cngps mapaddr asp Ing 114 09998 amp lat 22 55709 amp z 15 amp w 640 amp h 480 5 1 17 Single shot positioning links to Google Maps to return instructions Instruction format 1 668 user password 37 for example 6680000 instruction format 2 668 user password WWW HHH ZZ example 6680000 999 999 15 Description When the device receives the instruction 1 verify that the correct user password immediately after the read GPS information recognition information is valid send the current location of the Google Maps screenshot of the website the screenshots default resolution of 240 320 If you think that image is too small you can send commands 2 custom picture size in which the representative picture of the width of the WWW HHH on behalf of picture height ZZ for the zoom level you can set the size to comply with the resolution of your phone Note WWW HHH these two values can not be greater than 1000 ZZ between the values proposed 1 20 when the device receives the command make sure the correct user password immediately after reading the GPS information recognition information valid send the current location of the Google Maps screenshot of the website you set the capture resolution of the resolution Sc
37. his time for speeding AT 1 No 3 stored immediately sent to a 3 1 1 format of location information the information in the status prompt for the STATE OVER SPEED speeding alarm if it detects the speed of GPS in less than X it indicates the speed at this time to return to a safe speed Under the driving AT 1 immediately sent to the No 3 a 3 1 1 format stored location information the information in the status prompt for the STATE SAFE SPEED 4 1 10 Historical Data Uploading In SMS mode need to use this feature on the switch to GPRS mode on IP APN settings etc specific instructions and upload the data format please see the application of GPRS based operation 20 1 historical data records set command format 807 user password X Example 807 0000 30 Note X is a historical record of the sampling frequency an integer the domain of 0 999 unit is seconds When theAT 1 receiving the order to confirm the user password is correct set the historical record of the sampling frequency is X If X 0 then close the historical data records if X 0 then the start time interval to X seconds for the GPS data received and stored after a successful return to the sender to confirm the information SET SAMPLING OK Note 1 each data record about 100B BYTE can store up to 3000 2 the data covered by the stack of records that way When the recorded data over 3000 the new data received will automatically overwrite the
38. ime zone settings instructions Command format 896 user password 4 D NN Example 8960000E08 Description One user password for the four D values of E W that the time zone thing NN is a two digit 1 12 that when code When the product after receipt of order confirm the user password is correct after the success of products set to sender send a confirmation SMS TIME ZONE SET OK CURRENT DN such as TIME ZONE SET OK CURRENT E8 Such as setting 8960000E08 set the success of all data related to time received GPS time basis with 8 set 896000W07 set all the success and timing of the data received on the basis of time by GPS 7 Default output GMT if you set the parameters NN 00 cases the output product recovery GMT 4 1 13 Single Orientation return address instruction in Chinese Instruction format 1 667 user password for example 6670000 Instruction format 2 667 user password MAP example 6670000MAP Instruction format 3 667 user password MAP WWW HHH ZZ Example 6670000MAP 640 480 15 Description When device receives instruction 1 and confirm the correct user password immediately after reading the GPS information recognition information is valid send the address information to send the number of Chinese Such as King East Road Shenzhen Guangdong Poly Garden East Gate south 339 degrees east within a distance of 31 meters Send commands 2 will return a URL open the URL you can see the current location and a
39. in degrees 005 Password Rzzz z Set the fenced area the current location coordinates 100 Password Power saving features 122 Password x Set the speed alarm 150 Password Close Caller 151 Password Open calling 170 Password Open the command call restrictions 171 Password Close instructions call restrictions 210 Password Close fence detection 211 Password Open fence detection 222 Password Open GPS 333 Password Close GPS 667 Password Back to the Chinese position information 667 Password MAP Return address information plus screenshots Chinese 667 Password MAP WW W HHH ZZ Back to the Chinese address information plus screenshots screenshot to change the size and scale 668 Password Back to Google Maps Links Screenshots 668 Password W WW HHH ZZ Back to Google Maps screenshot link screenshot to change the size and scale 669 Password Back to Google Maps link 4xx Password From time to time point to point mode 666 Password Location to return a single user ID 777 New Password Old Password Change Password Stored number Password Serial number Change the stored number 801 Password New User Change the GPRS user name 802 Password new service password old service password GPRS service password change 803 Password APN GPRS access point settings 803 Password APN APNUser name
40. lled Start following a specific use 1 11 First step a product owner stored telephone numbers and only had phone numbers stored the product will send you instructions to respond to other messages in order to work properly Products of the factory configured in the appendix Command as follows Instruction format New number 4 20 bit Password 4 number 1 3 For example 13900000000 0000 1 Note User initial password is 0000 AT 1 can be stored up to three phone numbers When theAT 1 receiving the order confirm the user password is correct with the new number to replace the existing number after the success of the sender to send the confirmation to the SET USER NUMBER 1 3 OK 1 2 Mode of introduction of products The product has two modes of the SMS point to point mode and GPRS online mode the user would like to use if necessary read the vehicle with a mobile phone ie products latitude and longitude map check with the Internet by phone control to control vehicle oil road leads off the point to point can be selected messages required dynamic real time monitoring of vehicles can use GPRS real time online mode Switching modes are as follows 2 Based on the general application of SMS Point to Point The product s default mode is SMS point to point mode do not switch if from the GPRS mode to switch to point mode press the 2 1 0 operation 2 10SMS point to point mode Command format 700 user password 4
41. nd the confirmation to the GPS ON OK 2 close the GPS commands Command format 333 User Password 4 For example 3 330 000 Description When theAT 1 receiving the order confirm the user password is correct close the GPS after the success of the sender to send the confirmation to the GPS OFF OK 3 Adaptive GPS instructions power function Commands 100 user password For example 1000000 Description When theAT 1 receiving the order confirm the user password is correct close the GPS to the sender immediately send a confirmation SMS VIBRATION SENSOR ON OK Products built in vibration sensor once the monitoring of movement and change to the tracking devices to immediately open the GPS within 5 minutes if there is no monitoring of changes to the tracking devices will automatically turn off sports GPS Note If the long flat roads or the highway GPS may be long dormant but will not be awakened If 26 at this time to real time location tracking the user can send 222 user password to re open the GPS 4 GPS special power saving mode 1 Special power parameters Instruction format 199 user password Xxx Lyy Hzz For example 1990000S030L01H03 Description S030 that off GPS 30 minutes and can be set 1 255 Open the GPS that the first phase of LOI is 1 minute can be set 1 98 the first stage if the second stage is not positioned directly off GPS if not positioning the first stage the second phase H03 GPS r
42. omatic update instruction 1 the instruction format User password FTP address user name password 2 for example 0000 Igarin gicp net 123 0000 Description When the device receives the order confirmation password correctly and automatically restart FTP server address automatically log download When the update is successful will reboot again into normal use Note FTP address length 5 35 but also for domain names letters numbers dots Underscore _ and hyphen component User name FTP server user name a length of 3 20 password for FTP server password length 3 20 User name and password respectively numbers and letters FTP server to set their own customers the upgrade file please consult the product sales 6 Accessibility 1 the command reset RESET 0000 Description This command resets all the configuration information after the restart to the factory configuration 2 the instruction restart RESTART 0000 Description This command only restart theAT 1 do not reset the configuration information 3 the current configuration of the module to read SMS command format GTAS Function When the module receives instructions return all the settings stored in the module Data format IMEI marked as code MOD Point to Point SMS P2P 2 messaging platform SMS SC GPRS GPS normally open ON normally closed OFF power AUTO HFR hands free switch MTPRF Monitor SILENT
43. ons in the country to use Google Maps will lead to deviation from the actual address 4 1 16 single positioning command to return the Chinese Address Command format 667 user password for example 6 670 000 Description When the device received instructions and confirm the user password is correct immediately read the GPS information recognition information is valid send the address information to send the number of Chinese such as Shenzhen Guangdong King Poly East Gate of the East Verde Tiandong on the road south distance of 31 meters within 339 degrees 1 If sent in the past the server connection is not on or other reasons not connected on the back SEVER BUSY PLEASE TRY AGAIN LATER 2 If the GPS does not locate then the reply GPS NO FIX PLEASE TRY AGAIN LATER 3 for domestic policy reasons in domestic use Google Maps will lead to the actual address of nuclear deviation 4 1 17 Positioning single link back to Google Maps screenshot instructions Instruction format 1 668 user password example 6680000 instruction format 2 668 user password WWW HHH example 6680000 480 320 Description When the device received an order to confirm the user password is correct and immediately read the GPS information recognition Information valid send the current location at Google Maps screenshot the screenshot of the default resolution of 240 320 If you think that 24 picture too you can send commands 2 custom picture
44. ot be omitted IO fences are out of the alarm I Finalist bar alarm O a fence alarm When the device receives the instruction to confirm the user password correctly the sender returns confirmation messages SET SQUARE GEO FENCE GX IO 1 O OK Note 1 is set up automatically open the fence then the default fence type I0 out of the fence are the police 2 If the calling state is off it will not make calls SMS mode only send messages to the user 3 The setting of this directive and the switch from power down effect of changes until you receive further instructions or reset operation 4 After reset the value of latitude and longitude marked with 0 Fence is turned off 2 1 gt Open rectangular electronic fence Open all rectangular electronic fence instruction format 311 user password Eg 3100000 Electronic fence off a single rectangular Format 310 user password GX Eg 3100000G5 Description This command is used to open all the electronic fence and open a single rectangular rectangular electronic fence GX means that an electronic fence X X range 1 16 When the device receives the instruction correctly recognized the user password to open the electronic fence sender rectangular return confirmation messages Open all rectangular electronic fence resume SET ALL SQUARE GEO FENCE OFF open a single rectangular electronic fence is SET SQUARE GEO FENCE GX OFF Note If you set multiple alarms occurred while rectangular
45. ow any prompts in about 10 seconds after the automatic answer the user can listen to the sound track side but the track side can not hear the voice of the client X 0 turn on the handset as the normal mode After the success the sender should send the confirmation messages SET PROFILE OK CURRENT PROFILE NORMAL If the stored user opens the handset phone call came in there will be a tone about 10 seconds after the automatic answer the two sides can make a call 5 1 6 instructions are treated as processing which automatically updates the information state entries STATE ANSWEER Non stored phone number incoming call directly to hang up Note The factory set or reset state after the handset open non listening state 4 1 7 Active help feature Description When the long press SOS button more than 3 seconds immediately to the three phone numbers stored to send the location information such as 3 1 1 the information in the state prompted the STATE SOS Also call a telephone number stored in the first If unsuccessful shutdown or not connected then in turn call the second third If any of the stored numbers connected can remotely monitor Note If the calling state is off it will not make calls send text messages to pre existing users only 16 4 1 8 Electronic fence function Electronic fence is to set the coordinates for the center of the circle set the radius to determine the scope of the fence When turned on set the fence af
46. ptive three states GPS factory set or reset for the normal open state 1 open the GPS instruction Instruction format 222 user password 4 For example 2 220 000 Description When theAT 1 receiving the order confirm the user password is correct open the GPS power after the success of the sender to send confirmation message to the GPS ON OK 2 close the GPS commands Command format 333 user password 4 For example 3 330 000 Description When theAT 1 receiving the order confirm the user password is correct close the GPS after the success of the sender to send the confirmation to the GPS OFF OK 3 adaptive GPS instructions power function command 100 user password For example 1000000 Description When theAT 1 received the order confirm the user password is correct immediately close the sender GPS to send a confirmation SMS VIBRATION SENSOR ON OK Products built in vibration sensor once the monitoring of movement and change to the tracking devices to immediately open the GPS 5 minutes if there is no monitoring of changes to the tracking devices will automatically turn off sports GPS Note If the long flat roads or the highway GPS may be long dormant but will not be awakened If at this time to real time location tracking the user can send 222 user password to re open the GPS 4 GPS special power saving mode 1 Special power parameters Instruction format 199 user password Xxx Lyy Hzz For example
47. r sends a location information format information in the state prompted the SAFE SPEED 5 1 13 Historical data uploading In SMS mode need to use this feature to switch to GPRS mode prior to the IP APN settings etc can only be completed specific instructions and upload the data format please refer to GPRS mode three step basic setup 1 Historical data records set Command format 807 user password X Example 807 0000 30 Note X is a historical record of the sampling frequency an integer the domain of 0 999 unit is seconds When theAT 1 receiving the order to confirm the user password is correct set the historical record of the sampling frequency is X If X 0 then close the historical data records if X 0 then 35 the start time interval to X seconds for the GPS data received and stored after a successful return to the sender to confirm the information SET SAMPLING OK Note 1 each data record about 100B BYTE can store up to 3000 2 the data covered by the stack of records that way When the recorded data over 3000 the new data received will automatically overwrite the earliest recorded data 3 if the power saving feature is turned on and theAT 1 a long time at rest then history will automatically shut down until theAT 1 is awakened and opened the GPS 2 set of historical data upload instructions A From 24 hour history Instruction Format 808 user password 24 Example
48. r the success of the sender send a confirmation to the short message SET SERVER IP AND PORT OK The server IP address and port number provided by the vehicle monitoring service provider 3 Regular data upload settings Instruction Format 805 user password From each sample interval T N number of data section Example 805 0000 6 10 Function sampling time T in seconds the domain of 10 59999 upload data each time the Number N the domain of 1 50 When theAT 1 receiving the order confirm the user password is correct send a confirmation to the sender short message SET GPS SAMPLING TIME AND QUANTITY OK Instructions specified in both the sampling interval T a continuous reading GPS NEMA data in the GPRMC statement and stored in memory When the number of articles stored on the user to set up the Number of N per upload began to connect GPRS server and the data sent If the network or other reasons due to the data is not sent to the server then automatically open the ll blind repayAT 1 features that did not upload the data automatically backed up successfully when the network returned to normal after the replacement data to the server From the data format as shown in 5 1 6 the data in the state labeled AUTO When set to upload data each time the Number of N is 0 then close the regular upload send a confirmation to the sender SMS GPRS TIMER STOP Note 1 In order to increase product reliability is
49. reenshots URL example http maps google com staticmap center 22 554765 114 104716 amp zo0om 16 amp size 240x240 amp maptype mobile amp markers 22 554765 114 104716 bluea amp sensor false amp hl cn 5 1 18 Single Location Google Maps link instruction to return Format 669 user password for example 6 690 000 Description When the device receives the command make sure the correct user password immediately after reading the GPS information recognition information is valid send the current location of the Google Maps link to the number and user available through your PDA or smart mobile Internet Google Maps view in the current location URL Example http maps google com maps f g amp hl en amp q 22 554765 114 104716 amp ie UTF8 amp z 16 amp iwloc addr amp om 1 Note The above three commands if sent in the past not on the server connection or other reasons not connected the reply 1 If the connection is not on the server the reply SEVER BUSY PLEASE TRY AGAIN LATER 2 If there is no GPS location then the reply GPS UNAVAILABE PLEASE TRY AGAIN LATER 38 3 for domestic policy reasons in the country to use Google Maps will lead to deviation from the actual address 5 1 19 invalid data is uploaded switch Format 08X user password 4 Function When theAT 1 received the instruction to confirm the user password is correct according to the value of X is upload invalid data set switch state X 1 open
50. ssword Stored number Password Serial number Change the stored number 801 Password New User Change the GPRS user name 802 Password new service password old service password GPRS service password change 803 Password APN GPRS access point settings 803 Password APN APNUser name APNPassword GPRS access point settings 804 Password Fixed IP address and port Set IP address and port number 805 Password Sampling intervalT From the number of each clause N From time to time take the car to track mode settings 806 Password Request From Single Location 807 Password X Set the sampling rate history 808 Password 24 From the historical data 24 hours 808 Password From all the historical data 809 Password x y From time to time set the throttle stop mode RESET OOOO Reset all the configuration information after reboot RESTART OO000 Restart device 081 Password GPRS mode open the invalid data upload 080 Password GPRS mode close invalid data upload 44
51. ter theAT 1 beyond the scope of stored immediately after the No 3 sent to a 3 1 1 format of location information Information prompted the state to STATE OS Also call a telephone number stored in the first If unsuccessful shutdown or not connected then in turn call the second third When theAT 1 set to re enter the scope of the fence will immediately send to the No 3 stored location information of a 3 1 1 format Information in the state prompted the STATE RS Also call a telephone number stored in the first If unsuccessful shutdown or not connected then in turn call the second third 1 Set the fenced area According to the different coordinates input format the user can choose the following format command operation Instruction format 1 003 user password E Wdddmm mmmmN Sddmm mmRzzz z Example 0030000E11406 0024N2233 4230R0 1 Description E E W W N north latitude S South latitude Used in this example is E and N please select the appropriate location according to the actual coordinates of format settings The meaning of the various parts of the sample as follows Edddmm mmmm is divided into units of degrees longitude information which said ddd degrees mm mmmm said points Decimal point behind the four followed by zero can not be omitted Nddmm mmmm is divided into units of degrees latitude information which dd that degree mm mmmm said points Decimal point behind the four followed by zero can not be omitted
52. then in turn call the second third When theAT 1 again into the fenced area will be set immediately sent to the server 3 2 16 format of location information Tips for the state information RS Also call a telephone number stored in the first If unsuccessful shutdown or not connected then in turn call the second third 1 set the fenced area According to the different coordinates input format the user can choose the following format command operation Instruction format 1 003 user password E Wdddmm mmmmN Sddmm mmRzzz z For example 0030000E11406 0024N2233 4230R0 1 Description E E W W N north latitude S south latitude Used in this example is E and N please select the appropriate location according to the actual coordinates of format settings The meaning of the various parts of the sample as follows Edddmm mmmm is divided into units of degrees longitude information which said ddd degrees mm mmmm that sub Decimal point behind the four followed by zero can not be omitted Nddmm mmmm is divided into units of degrees latitude information which dd that degree mm mmmm said points Decimal point behind the four followed by zero can not be omitted Z2z Z is the domain of radius 999 9 0 1 in units of KM When theAT 1 receiving the order to confirm the user password is correct to return to the sender to confirm the short message SET GEO FENCE OK and open the electronic fence function Instruction format 2 004 us
53. ty of the original software set it with the base station with return return to the sender Data format Lat latitude latitude value precision after the decimal point 5 Long longitude direction longitude value precision after the decimal point 5 Speed speed KM H precision after the decimal point 2 Direction Heading accurate to two decimal places Date Date YY YY MM DD Time Time HH MM SS GMT BS base station information FIX Position Status A V ID IMEI STATE Information Status Valid data sample Lat 22 50500 Long 114 01000 Speed 0 00KM H 28 Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25ee0dff Fix A ID 353686009002030 STATE SMS Invalid sample data Lat 22 50500 Long 114 01000 Speed 0 00KM H Direction 315 00 Date 2008 04 25 Time 16 39 45 BS 25eeOdff Fix V ID 353686009002030 STATE SMS Note If the cold start and the GPS does not locate then return invalid information Such as ERROR GPS GPRMC FRAME DATA BS 27971054 ID 353686009002030 STATE SMS 5 1 4 Change the GPRS user name Instruction Format 801 user password the new user name For example 801 0000 username Note When theAT 1 receiving the order confirm the user password is correct update the user name the new user name set After the success of the sender send a confirmation to the short message CHANGE USERNAME OK 29 5 1 5 GPRS service
Download Pdf Manuals
Related Search