TP-1331 H.264 SD/HD Encoder ——User Manual
Contents
1. ct eb HO dee fe 10 3 2 52 6 1 Video Brightness cte ge tec eh i ds 11 3 2 5 2 6 2 Video Contrast 11 3 2 5 2 6 3 Video Saturation 11 3 2 5 2 6 Vid60 UG oboe e iege ees 12 3 2 5 2 6 5 Video AGC oi dte tr dpa eal 12 3 26 LS 2222 ben ien tenia 12 3 2 6011 Protocol 2560 ee E edere baee tle te 13 3 2 6 2 Multicast Adria iri Hb EE debe te 13 3 2 6 3 oU RUBER eed 13 3 2 6 4 Output Packet Num 13 3 2 6 5 Output Interval 13 3 2 7 Save Parameter pe n ehe 13 9 2 0 Encoder Version 2224 4 2554425 42254 45 24 teo dat ette 14 Chapter Four Instruction of the Indication Light 14 Precautions cae oi 15 Appendix Default Parameter 16 Note The Operation of TP 1310 H 264 SD encoder is the same with that of the TP 1331 H 264 HD encoder TP 1310 supports ASI and CVBS input ASI and IP output The SDI input and HDMI input service in the user manual is not available for TP 1310 Beijing Topreal Technologies Co LTD reserves the right of any modification to the product described in the manual If there is any difference of the pictures or text in the manual from the physical o2. for the address of the multicast 3 2 6 3 Multicast Port Such parameter is the setting for the port of the multicast 3 2 6 4 Output Packet Num Such parameter is the setting for the quantity of the protocol packet for the port 3 2 6 5 Output Interval Such parameter is the setting for the interval of the output packet 3 2 7 Save Parameter Such parameter is the save all the modified parameter for the encoder The specific operation enter Save Parameter menu press OK Note only have saved parameter in this service would all the parameter done above is in effective 3 2 8 Encoder Version In this service user can view the info of the hardware version as well as the software version of the encoder Chapter Four Instruction of the Indication Light POWER Power indicator light It is in red when the power is in normal working state SDI LOCK Front panel indicator light When the encoder is working normally and the signal is locked it is in green ALARM Encoder alarm indicator light It is on when there is some errors in parameter setting 19 Precautions 1 Please read this user manual before switch on TP 1331 H 264 SD HD encoder 2 Please make sure the video port is well connected when the machine is in the first use 3 Do not open the cabinet of the box in case of electric shock or do damage to the encoder 4 Please plug off the power when the encoder in not in use for a long t
3. parameter Press left 81 or the right key Default Parameter Record 1 Record 2 and Record 3 in circle show at the second line Select one of the items and press OK to confirm setting 3 2 5 2 LAN Setting Such item is to set LAN parameters for the encoder The specific operation Enter LAN Setting menu press OK to enter user would see IP Address IP Mask Address IP Way and the MAC Address from the left to the right 3 2 5 2 1 Set IP Address Such item is to set IP address for the encoder The specific operation enter Set IP Address menu the first Line shows Set IP Address and the second line shows the current IP address of the encoder Press OK to enter modification status then cursor appears where the number can be modified press left or right key to move cursor press up or down key to modify the chosen number Press OK to confirm setting 3 2 5 2 2 Set IP Mask address Such item is to set IP Mask address for the encoder The specific operation is enter Set IP Mask Address menu the first Line shows Set IP Mask Address and the second line shows the current IP Mask address of the encoder Press OK to enter modification status then cursor appears where the number can be modified press left or right key to move cursor press up or down key to modify the number Press OK to confirm setting 3 2 5 2 3 Set IP Way Such item is to set IP Way for the encoder The specific operation enter Set IP Way menu the first
4. the program to be transcoded 3 2 3 Video Setting Set the video resolution and bit rate for the input output TS for the encoder The specific operation enter Video Setting menu press OK user would see from the left to right in turn 51 3 2 3 1 Input Format Press OK to choose the resolution for the input video There are 1920 1080 24p 1920 1080 60i 1920 1080 50i 1280 720 60p 1280 720 50p 720 576 50i 720 480 60i Select one of them and press OK to confirm Note this service is only available when the input signal is ASI signal The video resolution set here should be the same with that of the source TS 3 2 3 2 Output Format Press OK to choose the resolution for the output video There are 1920 1080 60i 1920 1080 50i 1280 720 60p 1280 720 50p 720 576 50i 720 480 60i Select one of them and press OK to confirm Note this service is only available when the input signal is ASI or SDI signal The video resolution set here should be the same with that of the source TS 3 2 3 3 Bit Rate The specific operation of the bit rate setting enter Bit Rate menu the first line shows Bit Rate and the second line shows the current bit rate transmission separately Press OK to select bit rate Then cursor appears where number can be modified in the second line Press right or left button to move the cursor press up or down button to modify the number where cursor indicates Select the proper bit rates press OK to confirm sett
5. TP 1331 H 264 SD HD Encoder User Manual Content Chapter I Brief Introduction of the Function 2222 Chapter II Specification of TP 1331 Encoder 2 1 eot tome heut dates 2 2 Rear Panel Chapter III System Structure and Operation 3 1 Systemi Structure i eee te oh ia v E ge ee e abe 3 2 Panel Operation 3 2 1 Signal Port Format 3 2 2 ASI Information 3 2 2 1 Reload Service 3 2 2 1 Select Service 3 2 3 Video Setting 3 2 3 1 Input Format 3 2 3 2 Output Format 3 2 9 9 BIERale ee E ac Dee odeur es 3 2 3 4 51 Rate MOde M 3 2 4 Audio Setting 3 2 4 1 Audio Bit Setting 3 2 4 2 Input Audio format 3 2 5 Advanced Setting 3 2 5 1 Default Settilig po iere Be pec teme Eee pte addendo 3 2 5 1 1 Save Parameter 3 2 5 1 2 Load Parameter 3 2 5 2 LAN Setting Mattes eee iie dis 9 3 2 5 2 1 Set IP Address dieit diete ed deed 9 3 2 5 2 2 Set IP Mask address ene 9 3 2 5 2 9 Set IP Way reete teer tert eh 10 3 2 5 2 4 Set MAC Address 10 3 2 5 2 5 Output TS PID Setting sse 10 3 2 5 2 6 Video Settirigi
6. bject please take the actual product as a standard Chapter I Brief Introduction of the Function TP 1331 is the latest successive version of H 264 AVC Encoder plus the MPEG 2 to H 264 AVC Transcoder TP 1331 accepts HD SDI embedded audio HDMI or CVBS input for encoding the final output is available in ASI format or IP out With extraordinary picture quality and significant bandwidth liberation TP 1331 is the best choice for the digital head end system that has high bandwidth requirements TP 1331 SD HD Encoder can provide excellent video performance even in CBR and VBR operating mode with low bit rate Main Features Video coding complied with H 264 AVC High Profile Level 4 0 Video bit rate adjustment range 1 1 10Mbit s SD 3 20Mbit s HD TS to TS transcoding MPEG 2 HD to H 264 HD SD or MPEG 2 SD to H 264 SD CBR and VBR bit rate modes available Graphic resolution supports 1920 1080 24p 1920 1080 60i 1920 1080 50i 1280 720 60p 1280 720 50p 720 576 50i 720 480 60 Audio coding adapts MPEG 1 Audio Layer 2 and Dolby AC 3 Audio bit rate supports 64Kbit s 96Kbit s 112Kbit s 128Kbit s 160Kbit s 192Kbit s 224Kbit s 256Kbit s 320Kbit s and 384Kbit s H Excellent error recovery capability Encoding resolution auto recognized 10 single rack unit chassis LCD panel operation 5 IP output and DVB ASI output synchronically Service Port Input video Port SD HD SDI port SD HD encod
7. econd line twinkles Press right or left button to display Normal select this format when in encoding mode and Dolby AC 3 Select one of them and press OK to confirm Note in transcoder mode if the audio in the input TS adapts MEPG 1 or MPEG 2 mode please select Normal format if itis Dolby AC 3 mode please select Dolby AC 3 format 3 2 5 Advanced Setting Such parameter setting is to set the parameter save network output PID and Analog Video output of TP 1331 The specific operation enter Advanced Setting menu press OK to enter User will see from the left to the right in turn is 3 2 5 1 Default Setting Press OK to enter to set to save or read configuration file 3 2 5 1 1 Save Parameter This item is to save all the current parameters for the encoder The encoder provides three save address Record 1 Record 2 and Record 3 Specific operation enter Save Parameter Menu the first line displays Save Parameter and the second line shows the current save address Press OK to enter modification status then the second line twinkles Press left or right key Record 1 Record 2 and Record 3 will appear in the second line in circle Select one of the addresses and press OK to confirm setting 3 2 5 1 2 Load Parameter Such item is to read all the current parameters of the encoder The specific operation enter Load Parameter menu the first line displays Load Parameter and the second line shows the status of the current load
8. fult Setting Save Parameter Record 1 Record2 Record3 Load Parameter Defult Parameter Record1 Record2 Record3 LAN Setting Set IP Address Set IP Mask Add Set IP Way Mac Address Ouput TS PID Setting Video PID Advanced Setting AES PCR PID PMT PID SIT PID Video Setting Vid Brightness Video Contrast Video Stauration Video Hue Video AGC Protocol Opt RTP UDP Muleticast Addr TS IP Out wuleticast Port Output Packet Num Output Interval Save Parameter Need Rebuilding Encoder Version 3 2 Panel Operation 3 2 1 Signal Port Format This parameter setting is to set input video port TP 1331 has ASI in SDI in HDMI in CVBS in input port The specific operation enter Signal Port Format menu the first line will display Signal Port Format press OK to select video input port then the second line will twinkle press the left or right key you will see ASI in SDI in HDMI in and CVBS in in sequence at the second line separately Select one and press OK to confirm setting Note This port is only available when encoding the SD analog signal 3 2 2 ASI Information This parameter setting is to choose the ASl in program for the transcoding working mode The specific operation enter ASI Information menu press OK user would see from the left to right in turn 3 2 2 1 Reload Service Reload ASI program press OK to reload the ASI in program 3 2 2 1 Select Service Press OK to choose
9. ightness of the encoder The adjustable range of the brightness is from 01 to 99 The specific operation enter Video Brightness menu the first line displays Video Brightness while the second line displays the value of the current Video Brightness Press OK to enter modification status and then cursor appear where number can be modified at the second line Press left or right button to move cursor press up or down button to modify the chosen number Press OK to confirm setting Note This parameter is only available when encoding the SD analog signal 3 2 5 2 6 2 Video Contrast Such parameter is the modification of the Video Contrast The adjustable range of the Video Contrast is from 01 to 99 The specific operation enter Video Contrast menu the first line displays Video Contrast while the second line displays the value of the current Video Contrast Press OK to enter modification status and then cursor appear where number can be modified at the second line Press left or right key to move cursor press up or down key to modify the chosen value Press OK to confirm setting Note This parameter is only available when encoding the SD analog signal 3 2 5 2 6 3 Video Saturation Such parameter is the setting for the Video Saturation The adjustable range of the Video Saturation is from 01 to 99 The specific operation enter Video Saturation menu the first line displays Video Saturation while the second line displays the value of
10. ime please never use damaged electrical outlet to avoid fire or electric shock 5 Never touch the electronic outlet with wet hand Switch the power off at once if liquid leaks into the encoder 6 Please put the encoder in a horizontal place and avoid pressing 7 Do not put heavy objects on the encoder 8 Put the machine in a ventilated temper temperature place avoids sunshine moist and strong shock 9 When the machine is moved to a new place with sharp different temperature please keep it off for one or two hours Appendix Default Parameter Name Signal Port Input Bit Rate Video Brightness Video Contrast Video Saturation Video Hue Audio Bit Rate Video PID ASI Out Audio PID ASI Out PCR PID ASI Out PMT PID ASI Out Video PID ASI In Audio PID ASI In Audio PID 2 ASI In PCR PID ASI In PMT PID ASI In Set IP address Set IP Mask address Set IP Way Bit Rate Mode IP Out Net Protocol IP Out MultiAddress IP Out Port IP Out TS Number IP Out Interval Default Value ASI 1 50Mbps 55 48 48 50 128Kbps 0x1011 0x1100 0x1001 0x0100 Ox AO 0x50 0x50 0x134 Ox 20 192 168 5 81 255 255 0 0 192 168 1 1 CBR RTP 224 0 1 0 1234 Seven 188 50 us 16
11. ing 3 2 3 4 Bit Rate Mode This item can set the bit rate transmission mode of the encoder The specific operation enter Bit Rate Mode menu the first line will display Bit Rate Mode while the second line displays the current bit rate mode press OK to modify then the second line will twinkle press left or right key it will display VBR Variable Bit Rate or CBR Constants Bit Rate separately Select one of the modes and press OK to confirm setting 3 2 4 Audio Setting Such parameter is the advanced setting to the Audio parameter of the encoder The specific operation enter Audio Setting menu press OK to choose 3 2 4 1 Audio Bit Setting Such parameter is the setting to Audio Bit Rate The available audio bit rate is 64kbps 90kbps 128kbps 160kbps 192kbps 224kbps 256kbps 320kbps and 348kbps The specific operation enter Audio Bit Rate menu the first line displays Audio Bit rate press OK to enter modification status then the second line twinkles press left or right key you ll see 64kbps 90kbps 128kbps 160kbps 192kbps 224kbps 256kbps 320kbps and 348kbps at the second line Select one of the bit rates and press OK to confirm setting 3 2 4 2 Input Audio format Set the input audio format when the encoder is in the transcoder mode The specific procedure is enter Input Audio Formats menu the first line shows Input Audio Formats and the second line shows the current format Press OK to select Then the s
12. ing support embedded audio ASI port analog composite video S VIDEO optional HDMI Input audio Port analog audio left and right Output Port DVB ASI Port 100 Base T Ethernet port RTP protocol Monitor port RS 232 port Network Port 100Base T Ethernet port Chapter II Specification of TP 1331 Encoder 2 1 Front Panel e e SDI IP POWER ime e ok OK enter the next menu or modify parameter or confirm operation Up Down Key to enter sub menu or increase decrease value Left Right Key to enter sub menu or move cursor MENU Key to return to previous menu or cancel modifying parameter 2 2 Rear Panel ASI IN SDI IN TSINTER OO The ports in the rear panel in turn are in left to right sequence ASI IN ASI OUT ASI OUT CVBS Audio IN HDMI IN HD SDI IN TS Ethernet port RS 232 port Chapter III System Structure and Operation 3 1 System Structure Signal Port Input ASI HDMI SDI CVBS Reload Service Select Service ASI Infomation puer Input Format 720 576 50i 720 480 60i 720 50P 1280 720 60P 1920 1080 50i 1920 1080 601i 1920 1080 24 Output Formal 720 576 50i 720 480 60i 720 50P 1280 720 60P 1920 1080 50 i 1920 1080 60i Bit Rate Video Setting Bit Rate Mode VBR CBR i Audio Bit SETTING 64k 96k 128k 160k 192k 224k 256k 320k 348k Audio Setting Au Format Nomal Dolby AC 3 De
13. line shows Set IP Way and the second line shows the current IP Way address of the encoder Press OK to enter modification status then cursor appears where the number can be modified press left or right key to move cursor press up or down key to modify the number Press OK to confirm setting 3 2 5 2 4 Set MAC Address Such item can not be set but only be viewed 3 2 5 2 5 Output TS PID Setting This parameter is used to set the Video PID Audio1 left PID Audio2 right PID PCR PID and PMT PID for the input MPEG 2 signal when the encoder is in transcoder mode Only set these PID value correctly can the encoder do transcoding correctly There are two audio PID setting 01 and audio2 in this item If there is only one audio PID in the input TS please set the two audio PID as the same 3 2 5 2 6 Video Setting Such parameter is the advanced setting of the video parameter to the encoder There are five advanced setting for video in the encoder The specific operation enter Video Setting menu the screen displays the current video parameter setting Press left or right button you can see Video Contrast Video Saturation Video Hue Video AGC and Video Brightness in sequence in the first line and the specific value or status of the current parameter show 10 in the second line Note This parameter is only available when encoding the SD analog signal 3 2 5 2 6 1 Video Brightness Such parameter is to adjust Video Br
14. the current Video Saturation Press OK to enter modification status and then cursor appear where number can be modified at the second line Press left or right key to move cursor press up or down key to modify the chosen value Press OK to confirm setting Note This parameter is only available when encoding the SD analog signal 3 2 5 2 6 4 Video Hue Such parameter is the setting for the Video Hue The adjustable range of the Video Hue is from 01 to 99 The specific operation enter Video Hue menu the first line displays Video Hue while the second line displays the value of the current Video Hue Press OK to enter modification status and then cursor appear where number can be modified at the second line Press left or right key to move cursor press up or down key to modify the chosen value Press OK to confirm setting Note This parameter is only available when encoding the SD analog signal 3 2 5 2 6 5 Video AGC Such parameter is the setting for the gain of the analog video 3 2 6 TS IP Output Such parameter is the setting for the TS IP output for the encoder The specific operation enter TS IP Output menu press OK User would see from the left to right in turn 124 13 3 2 6 1 Protocol Opt Press OK to choose to the Protocol operation There are two protocols available UDP and RTP Press left or right key to move cursor to one of them press OK to confirm 3 2 6 2 Multicast Addr Such parameter is the setting
Download Pdf Manuals
Related Search