Tango Device Server User's Guide
Contents
1. 2 SE P TANGO SS KEIL PA E Device ESRF Server MicroControleurRFBooster User s Guide RFMicroAmpli Class Revision release_1_0_2 Author elattaoui Implemented in C Introduction This class ask the booster microcontroler to send all the values of the modules and the defaults if there are The speed propertie is the maximum of the RS232 bus The RSProxy the DServer Serial to connect to Class Inheritance e o RFMicroAmpli Properties Device Properties Property name Property type Description ys Nn az 3 gt lt Tango DEV_STRING The name of the DServer Serial which open the RS232 communictaion Timeout Tango DEV_SHORT timeout in ms to read data on the serial line arity Tango DEV_STRING parity could be none even odd harlength Tango DEV_SHORT Sets the new charlength 0 8 bits 1 7 bits 2 6 bits 3 5 bits topbits Tango DEV_SHORT Number of stop bit s 0 1 bit 2 2 bits 1 1 5 bits seems not supported Tango DEV_ULONG Speed of the transmision At this moment the communiction speed with the microcontroller is set to 57600 Tango DEV_SHORT End of message Character used in particular by the DevSerReadLine command Default 13 Z zZz i l Ia aAa S Sl lel IS Je fe MERE el S lt Tango DEV_SHORT Nombre maximum d ampl2. harlength Tango DEV_SHORT Sets the new charlength 0 8 bits 1 7 bits 2 6 bits 3 5 bits topbits Tango DEV_SHORT Number of stop bit s 0 1 bit 2 2 bits 1 1 5 bits seems not supported Tango DEV_ULONG Speed of the transmision At this moment the communiction speed with the microcontroller is set to 57600 Tango DEV_SHORT End of message Character used in particular by the DevSerReadLine command Default 13 Z zZz i l Ia aAa S Sl lel IS Je fe MERE el S lt Tango DEV_SHORT Nombre maximum d amplis presents Nb_max_Dissipateur Tango DEV_SHORT Nombre max de barres presentes par ampli Nb_max_Module Tango DEV_SHORT Device Properties Default Values Property Name Default Values RSProxy No default value Timeout No default value Parity No default value Charlength No default value Stopbits No default value Baudrate No default value Newline No default value Nb_max_Tour No default value Nb_max_Dissipateur No default value Nb_max_Module No default value Nombre max de modules par barre There is no Class properties Commands Device Commands for Operator Level Command name Argument In Argument Out Init DEV_VOID DEV_VOID State DEV_VOID DEV_STATE Status DEV_VOID CONST_DEV_S
3. SOLEIL MicroControleurRFBooster Device Commands Description RFMicroAmpli Class Revision release_1_0 2 Author elattaoui 1 Init Description This commands re initialise a device keeping the same network connection After an Init command executed on a device it is not necessary for client to re connect to the device This command first calls the device delete_device method and then execute its init_device method For C device server all the memory allocated in the nit_device method must be freed in the delete_device method The language device desctructor automatically calls the delete_device method Argin DEV_VOID none Argout DEV_VOID none Command allowed for 2 State Description This command gets the device state stored in its device_state data member and returns it to the caller e Argin DEV_VOID none Argout DEV_STATE State Code Command allowed for 3 Status Description This command gets the device status stored in its device_status data member and returns it to the caller Argin DEV_VOID none Argout CONST_DEV_STRING Status description Command allowed for GetModuleValue Description This command returns the report of the module Courant 1 amp 2 or Incidente amp Reflechie Power specified by its number and the number of its barre which the module is one Argin DEVVAR_SHORTARRAY Tour Dissipateur Niveau and
4. Module numbers Argout DEVVAR_DOUBLEARRAY module values 2 values Command allowed for ReadHardwareValues Description This command reads the hardware MicroController values and completes the amplifier_values array which is a Tango DevVarCharArray Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for Polled every 3000 ms ReadHardwareDefault Description This command reads the hardware MicroController default and completes the default_value array which is a Tango DevVarCharArray Argin DEV_VOID no argin e Argout DEV_STRING Module default if any else No default Command allowed for Polled every 1000 ms 7 GetDefaultList Description List of all defaults that occur when read the iz 2Controller erase the default so this command build a default list Argin DEV_VOID no argin Argout DEVVAR_STRINGARRAY Default list Command allowed for 8 ClearDefaultList Description Clear the default list Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for ESRF Software Engineering Group
5. TRING GetModuleValue DEVVAR_SHORTARRAY DEVVAR_DOUBLEARRAY ReadHardwareValues DEV_VOID DEV_VOID ReadHardwareDefault DEV_VOID DEV_STRING GetDefaultList DEV_VOID DEVVAR_STRINGARRAY ClearDefaultList DEV_VOID DEV_VOID 1 Init Description This commands re initialise a device keeping the same network connection After an Init command executed on a device it is not necessary for client to re connect to the device This command first calls the device delete_device method and then execute its init_device method For C device server all the memory allocated in the nit_device method must be freed in the delete_device method The language device desctructor automatically calls the delete_device method Argin DEV_VOID none Argout DEV_VOID none Command allowed for 2 State Description This command gets the device state stored in its device_state data member and returns it to the caller Argin DEV_VOID none Argout DEV_STATE State Code Command allowed for 3 Status Description This command gets the device status stored in its device_status data member and returns it to the caller Argin DEV_VOID none Argout CONST_DEV_STRING Status description Command allowed for 4 GetModuleValue Description This command returns the report of the module Courant 1 amp 2 or Incidente amp Reflechie Power specified by its number and the number o
6. e method must be freed in the delete_device method The language device desctructor automatically calls the delete_device method Argin DEV_VOID none Argout DEV_VOID none Command allowed for 2 State Description This command gets the device state stored in its device_state data member and returns it to the caller Argin DEV_VOID none Argout DEV_STATE State Code Command allowed for 3 Status Description This command gets the device status stored in its device_status data member and returns it to the caller Argin DEV_VOID none Argout CONST_DEV_STRING Status description Command allowed for 4 GetModuleValue Description This command returns the report of the module Courant 1 amp 2 or Incidente amp Reflechie Power specified by its number and the number of its barre which the module is one Argin DEVVAR_SHORTARRAY Tour Dissipateur Niveau and Module numbers Argout DEVVAR_DOUBLEARRAY module values 2 values Command allowed for 5 ReadHardwareValues Description This command reads the hardware MicroController values and completes the amplifier_values array which is a Tango DevVarCharArray Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for Polled every 3000 ms 6 ReadHardwareDefault Description This command reads the hardware MicroController default and completes the default_value ar
7. f its barre which the module is one Argin DEVVAR_SHORTARRAY Tour Dissipateur Niveau and Module numbers Argout DEVVAR_DOUBLEARRAY module values 2 values Command allowed for 5 ReadHardwareValues Description This command reads the hardware MicroController values and completes the amplifier_values array which is a Tango DevVarCharArray Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for Polled every 3000 ms 6 ReadHardwareDefault Description This command reads the hardware MicroController default and completes the default_value array which is a Tango DevVarCharArray Argin DEV_VOID no argin Argout DEV_STRING Module default if any else No default Command allowed for Polled every 1000 ms 7 GetDefaultList Description List of all defaults that occur when read the ij 2Controller erase the default so this command build a default list Argin DEV_VOID no argin Argout DEVVAR_STRINGARRAY Default list Command allowed for 8 ClearDefaultList Description Clear the default list Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for ESRF Software Engineering Group Frame Alert This document is designed to be viewed using the frames feature If you see this message you are using a non frame capable web client Link to Non frame version Device Server di
8. is presents Nb_max_Dissipateur Tango DEV_SHORT Nombre max de barres presentes par ampli Nb_max_Module Tango DEV_SHORT Device Properties Default Values Property Name Default Values RSProxy No default value Timeout No default value Parity No default value Charlength No default value Stopbits No default value Baudrate No default value Newline No default value Nb_max_Tour No default value Nb_max_Dissipateur No default value Nb_max_Module No default value Nombre max de modules par barre There is no Class properties Commands Device Commands for Operator Level Command name Argument In Argument Out Init DEV_VOID DEV_VOID State DEV_VOID DEV_STATE Status DEV_VOID CONST_DEV_STRING GetModuleValue DEVVAR_SHORTARRAY DEVVAR_DOUBLEARRAY ReadHardwareValues DEV_VOID DEV_VOID ReadHardwareDefault DEV_VOID DEV_STRING GetDefaultList DEV_VOID DEVVAR_STRINGARRAY ClearDefaultList DEV_VOID DEV_VOID 1 Init Description This commands re initialise a device keeping the same network connection After an Init command executed on a device it is not necessary for client to re connect to the device This command first calls the device delete_device method and then execute its init_device method For C device server all the memory allocated in the nit_devic
9. ray which is a Tango DevVarCharArray Argin DEV_VOID no argin Argout DEV_STRING Module default if any else No default Command allowed for Polled every 1000 ms 7 GetDefaultList Description List of all defaults that occur when read the ij 2Controller erase the default so this command build a default list Argin DEV_VOID no argin Argout DEVVAR_STRINGARRAY Default list Command allowed for 8 ClearDefaultList Description Clear the default list Argin DEV_VOID no argin Argout DEV_VOID no argout Command allowed for ESRF Software Engineering Group Device Server efit SLE MicroControleurRFBooster User s Guide RFMicroAmpli Class Revision release_1_0_2 Author elattaoui Implemented in C Introduction This class ask the booster microcontroler to send all the values of the modules and the defaults if there are The speed propertie is the maximum of the RS232 bus The RSProxy the DServer Serial to connect to Class Inheritance e Oo RFMicroAmpli Properties Device Properties Property name Property type Description ys Nn az 3 gt lt Tango DEV_STRING The name of the DServer Serial which open the RS232 communictaion Timeout Tango DEV_SHORT timeout in ms to read data on the serial line arity Tango DEV_STRING parity could be none even odd
Download Pdf Manuals
Related Search