L-SA4 SHD User's Guide V1.1
Contents
1. L P101 and Medio P200L WARNING TO USERS IN THE UNITED STATES FEDERAL COMMUNICATIONS COMMISSION FCC RADIO INTERFERENCE STATEMENT 47 CFR Section 15 105 b This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different to that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NO UNAUTHORIZED MODIFICATIONS 47 CFR Section 15 21 CAUTION This equipment may not be modified altered or changed in any way without signed written permission from TAGSYS SAS Unauthorized modification may void the equipment authorization from2. 8 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 2 Certification 2 1 Occupational Health and Safety Notices TAGSYS Products have been designed not to exceed the limits given in the European Standard EN 50364 Limitation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance EAS Radio Frequency Identification RFID and similar applications in conjunction with the European Standard EN 50357 describing how to evaluate the exposure level It is the responsibility of the TAGSYS Partner to install the L SA4 SHD Antenna as described in TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate antennas Modification of any TAGSYS System is prohibited without the written consent of TAGSYS Unauthorized modifications may void the conformity of the equipment to safety norm and will void the TAGSYS warranty An RF field s survey has been carried out on all the System components in accordance with AS NZS 2771 1 Radio Frequency Radiation Part 1 According to this standard the maximum allowable RF exposure levels non occupational at 3 kHz to 300 GHz are 200 uW cma 2 2 Regulatory Notices An RFID system typically composed of an RF emission device such as the L SA4 SHD Antenna is subject to national regulations that may differ by country One important item to consider is the maximum permissible magnetic field intensity at a distan
3. 2 3 1 ROHS Restriction of the uses of certain Hazardous Substances TAGSYS certifies that the L SA4 SHD Antenna is compliant with the European Directive 2002 95 EC for the restriction in Electric and Electronic Equipments RoHS of the use of the following hazardous substances e Lead e Mercury e Cadmium e Hexavalent Chromium e Polybrominated biphenyl flame retardants e Polybrominated diphenyl ether flame retardants This declaration is based on information provided by our suppliers and subcontractors 2 3 2 WEEE Waste Electrical and Electronic Equipment August 2010 Revision 1 1 11 23 L SA4 SHD Antenna User s Guide TAGSYS RFID e connecting goods This product bears the selective sorting symbol for waste electrical and electronic equipment WEEE This means that this product must be handled pursuant to European Directive 2002 96 EC in order to be recycled or dismantled to minimize its impact on the environment For further information please contact your local or regional authorities 12 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 3 Overview The L SA4 SHD Antenna allows multiple books or CDs DVDs transactions stack of books stack of CDs DVDs The antenna provides a large area of detection Figure 1 The L SA4 SHD Antenna is optimized for use with the TAGSYS L P101 Medio P200L and L L100 please see Caution readers and is recommen
4. or extend the supplied cable as this may affect performance Do not place the antenna cable close to other cables especially power cables 4 3 Active Area in Desktop Configuration Due to the magnetic field radiated by the antenna a restricted area must be preserved around the antenna to prevent unwanted reading or programming tags during check in and check out operations Items must be kept out from the limited active area as shown in Figure 3 August 2010 Revision 1 1 15 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods Figure 3 Active Area in Standard Configuration 50 mm 2 in i lt gt 50 mm 2 in 4 4 Specific Installation using the Mounting Kit The L SA4 SHD Antenna is provided with a mounting kit for specific installations This mounting kit can be used to orient the active face of the antenna depending on your application Metallic or conductive parts must not be present in front of the active face of the antenna D io For best performance always request an installation compliance agreement from TAGSYS Custom Services regarding your specific installation l The TAGSYS Antenna Tuning Kit Device may be required to verify the tuning of antennas for a specific installation Figure 4 Using the Mounting Kit Overview Figure 5 Using the Mounting Kit Close up View mm i ma Flat headed screw M4x12 washer This configuration reduces reading or writing pe
5. party actions and in particular in case of any successful attack against systems or equipment incorporating TAGSYS products TAGSYS disclaims any liability with respect to security for direct indirect incidental or consequential damages that result from any use of its products It is further stressed that independent testing and verification by the person using the product is particularly encouraged especially in any application in which defective incorrect or insecure functioning could result in damage to persons or property denial of service or loss of privacy Copyright TAGSYS 2000 2010 MS DOSO and Windows are registered trademarks of Microsoft Corporation Printed in France TAGSYS 785 Voie Antiope Ath lia IIl 13600 La Ciotat France Tel 33 0 4 42 18 89 00 Fax 33 0 4 42 18 89 01 Document Reference DOC13754A1 2 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide Read This First Welcome to the TAGSYS RFID System This User s Guide is designed to help you get up and running quickly using this high quality Radio Frequency Identification RFID system It describes all you need to know about how to install and use the TAGSYS system and its associated applications It provides a step by step guide for the following procedures e Installation of the L S5A4 SHD Antenna e Configuring the product for use within your system This guide is designed for all TAGSY
6. AGSYS quote TAGSYS will return the products and charge the analysis cost and shipping costs All replaced Products shall become the property of TAGSYS The Product Return Form is included on the following page This form should accompany any product you need to return to TAGSYS for analysis in the event of a problem 22 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide Product Return Form Customer Profile CG FRI DS ENT T Contact Name eee traten Bee cose DUAE ee Ne iM ADEST REM Contact e mail eene antes Contact Phore ie certi ndr nnde dir ndr wsasasassssssssassnasnssasnssusunusususuunssusususeasssesesssssusssuseseanensnsnsnssusus Contact T AAE PEE AA AE PAA A A City Sc State sareretan aneia Zip COGQQ tee ecc aat en Order identification Product Name Invoice Number Order Number OEF mM Return Quantity Rr Pm To inform TAGSYS of this return please email it to RMA tagsysrfid com Address to ship the product with this document attached TAGSYS QUALITY DEPARTMENT TAGSYS 785 Voie Antiope Ath lia III 13600 La Ciotat France To inform TAGSYS of this return please also fax it to your Customer Service Representative 433 0 4 42 18 89 01 Return Procedure The product returned will go through stringent quality contr
7. GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide Revision 1 1 www tagsysrfid com TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods Publishing Information Disclaimer and Limitation of Liability All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such information Nothing herein shall be construed as implying or granting to you any rights by license grant or otherwise under any intellectual and or industrial property rights of or concerning any of TAGSYS information This document can be used for informational non commercial internal and personal use only provided that e the copyright notice below the confidentiality and proprietary legend and this full warning notice appear in all copies e this document shall not be posted on any network computer or broadcast in any media and no modification of any part of this document shall be made Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities The information contained in this document is provided AS IS without any warranty of any kind Unless otherwise expressly agreed in writing TAGSYS makes no warranty as to the value or accuracy of information contained herein The document could include t
8. S partners and for TAGSYS Expert Network customers implementing a low cost and high performance RFID solution This document does not assume any previous knowledge of Radio Frequency Identification RFID technology Conventions Symbol Meaning CAUTION A note that advises users that a specific action could result in the loss of data or damage the hardware WARNING A note that advises users that a specific action may result in physical harm A note that provides additional information that helps the user performs a task or obtains the best performance from the product If you need assistance Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at Telephone 33 0 4 42 18 89 00 Fax 33 0 4 42 18 89 01 E Mail info tagsysrfid com Website http www tagsysrfid com Contact for Comments We welcome your feedback to help us provide high quality documentation For technical comments please contact our welcome desk Telephone 33 0 4 42 18 89 00 Fax 33 0 4 42 18 89 01 E Mail info tagsysrfid com Please remember to quote the Document Reference Number DOC13754A1 your job title and your company August 2010 Revision 1 1 3 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods Quality Issues TAGSYS implements stringent quality controls at all stages of its manufacturing process However should you find a defect with this product pleas
9. WARRANTY EXCLUSIONS 2 GENERAL PROVISIONS 3 8 1 8 1 8 1 8 1 How TO RETURN DEFECTIVE PRODUCTS 20 20 20 21 21 21 22 22 6 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 1 For Your Safety 1 1 General Use The L SA4 SHD Antenna is designed to be rugged and reliable and to provide years of trouble free service Please observe the following general tips e Take care not to scratch the device Keep the device clean When working with the device use only TAGSYS approved accessories e This device is not waterproof and should not be exposed to rain or moisture Under extreme conditions water may enter the circuitry e Take care not to drop the device or subject it to any strong impact e Protect the device from extreme temperatures e Do not store or use the device in any location that is extremely dusty damp or wet e Use a soft damp cloth to clean the device If the surface of the device becomes soiled clean it with a soft cloth moistened with a diluted window cleaning solution 1 2 Care and Maintenance This device is a product of superior design and should be handled with care The suggestions below will further increase the lifetime of this device e Keep the device and all parts and accessories out of the reach of small children e Keep the device dry Precipitation humidity and liquids contain minerals that will corrode electronic circuits e Do n
10. YS Antenna Tuning Kit documentation The tuning capacitor of the L SA4 SHD Antenna is accessible from the bottom side of the antenna and is located under the TAGSYS logo located at the top left corner of the label which specifies the product type and serial number Figure 6 Two separate tuning capacitors are used to tuned both phase and amplitude of the antenna signal Optimum tuning and electrical cable length are necessary to allow multiple CDs DVDs operation Figure 6 Position of the Tuning Capacitor on L SA4 SHD Antenna GOT EN SE AI amp N MOZAO coz Reng Fadrique en france wx AED mum Tuning Capacitors under Label When re tuning the antenna please turn the tuning capacitor with care 18 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide Any re tuning of the antenna will damage the label but will not void the warranty of the L SA4 SHD Antenna provided the tuning procedure defined in the antenna tuning kit has been followed CAUTION When retuning the antenna make sure that the antenna is not connected to the reader and that the reader is switched off August 2010 Revision 1 1 19 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods 7 Technical Data 7 1 Mechanical Characteristics Description Value Housing Blue Plastic ABS UL 94 VO Dimensions with Cover 288 x 263 x 21 mm 1175
11. ce of 10 meters from the antenna that must not exceed 42 dBuA m in Europe and 38 dBpA m in US The L SA4 SHD Antenna meets these limits It is the responsibility of the TAGSYS Partner to install the L SA4 SHD Antenna as described in this User s Guide or in TAGSYS Documentation 2 2 1 In Europe CE and RTTE Directives The L SA4 SHD Antenna complies CE Declaration of Conformity granted with the European EMC directive The L SA4 SHD Antenna complies with the requirements of the Telecommunication Terminal Equipment Act FTEG and the RTTE Directive 1995 5 EC Any modification of the L SA4 SHD Antenna is prohibited without the written consent of TAGSYS Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives and will void the TAGSYS warranty If a L SA4 SHD Antenna is further integrated in a different product it is the responsibility of the manufacturer of this complementary product to obtain the required approvals for this product 2 2 2 In USA FCC Directive The L SA4 SHD Antenna has been designed to comply with Part 15 of the FCC Rules when used with L P101 and Medio P200L readers The certified base configuration is L SA4 SHD Antenna August 2010 Revision 1 1 9 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods connected to the L P101 or Medio P200L readers which has been successfully tested with Part 15 of the FCC rules FCC ID Number QHKLIBREADERLP101
12. ded for check in out operations L L100 library reader is only certified in Europe Due to its specific design the L SA4 SHD Antenna can be safely used in proximity with other TAGSYS RFID products It will work also if properly installed in metallic type environments see Section 4 Installation for more details In this case performance may be reduced The antenna is provided with rubber base pads for installation in a standard desktop configuration Although this antenna has been specifically designed for library applications it can also be used for any application requiring a desktop station which has a good immunity to its environment The antenna has been factory calibrated to an impedance of 50 O which offers optimal performance when the antenna is installed on the surface of a desk or table It may be necessary to retune the antenna once installed if the environment is highly metallic or if the antenna is installed underneath the table or desk For more information about tuning antennas refer to Section 6 2 Antenna Tuning Optimal performance is achieved when the smart labels to be read are placed parallel to the antenna surface and centered on the antenna surface Figure 1 L SA4 SHD Antenna August 2010 Revision 1 1 13 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods 3 1 Delivery Kit The items listed in Table 1 are included in the delivery kit Table 1 Contents of the Deliv
13. e notify your TAGSYS Quality Service representative using the dedicated Product Return Form Telephone 33 0 4 42 18 89 36 Fax 33 0 4 42 18 89 01 4 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide Table of Contents PUBLISHING INFORMATION 2 DISCLAIMER AND LIMITATION OF LIABILITY 2 READ THIS FIRST 3 CONVENTIONS 3 IF YOU NEED ASSISTANCE 3 CONTACT FOR COMMENTS 3 QUALITY ISSUES 4 1 FOR YOUR SAFETY 7 1 1 GENERAL USE 7 1 2 CARE AND MAINTENANCE 7 1 3 IMPORTANT SAFETY INFORMATION 7 1 3 1 OPERATING ENVIRONMENT 7 2 CERTIFICATION 9 2 1 OCCUPATIONAL HEALTH AND SAFETY NOTICES 9 2 2 REGULATORY NOTICES 9 2 2 1 IN EUROPE CE AND RTTE DIRECTIVES 9 2 2 2 IN USA FCC DIRECTIVE 9 2 2 3 IN CANADA 11 2 3 RoHS AND WEEE DIRECTIVES 11 2 3 1 RoHS RESTRICTION OF THE USES OF CERTAIN HAZARDOUS SUBSTANCES 11 2 3 2 WEEE WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT 11 3 OVERVIEW 13 3 1 DELIVERY KIT 14 4 INSTALLATION 15 4 1 STANDARD INSTALLATION 15 4 2 DESKTOP CONFIGURATION 15 4 3 ACTIVE AREA IN DESKTOP CONFIGURATION 15 4 4 SPECIFIC INSTALLATION USING THE MOUNTING KIT 16 5 OPERATION 17 6 MAINTENANCE 18 6 1 SERVICING THE L SA4 SHD ANTENNA 18 6 2 ANTENNA TUNING 18 August 2010 Revision 1 1 5 23 L SA4 SHD Antenna User s Guide TAGSYS RFID e connecting goods 7 TECHNICAL DATA 7 1 MECHANICAL CHARACTERISTICS 7 2 ELECTRICAL CHARACTERISTICS 8 WARRANTY CONDITIONS WARRANTY 1
14. echnical inaccuracies or typographical errors Changes are periodically added to the information herein Furthermore TAGSYS reserves the right to make any change or improvement in the specifications data information and the like described herein at any time Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software that include TAGSYS products TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION CONTAINED HEREIN INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE TITLE AND NON INFRINGEMENT IN NO EVENT SHALL TAGSYS BE LIABLE WHETHER IN CONTRACT TORT OR OTHERWISE FOR ANY INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE DATA PROFITS REVENUES OR CUSTOMERS ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT TAGSYS does not and shall not warrant that this product system equipment will be resistant to all possible attacks and shall not incur and disclaims any liability in this respect Even if each product is compliant with current security standards in force on the date of their design security mechanisms resistance necessarily evolves according to the state of the art in security and notably under the emergence of new attacks Under no circumstances shall TAGSYS be held liable for any third
15. ery Kit Quantity Description 1 L SA4 SHD Antenna with one 3m long coaxial cable and fitted with 6 ferrite beads 1 Mounting Kit including 4 brackets and associated screws and nuts 1 Cable mounting ferrite for use with L P101 or Medio P200L 1 CD ROM including user documentation product software and example application 14 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 4 Installation 4 1 Standard Installation The recommended installation for the L SA4 SHD Antenna is the desktop configuration Its thin shape is ergonomically designed for discreet use at the circulation desk for multiple check in out operations The L SA4 SHD Antenna is designed for indoor use 4 2 Desktop Configuration The antenna is specially designed to operate e On wooden synthetic or metallic desks or those including metallic parts e Inclose proximity to other antennas Place the antenna on the desk and connect the BNC connector to the RF output of the L P101 Medio P200L or L L100 readers Figure 2 Standard Desktop Installation P Active face o CAUTION Always ensure that the reader unit is switched off before connecting or disconnecting the antenna Also the antennas MUST be connected to the reader unit before it is switched on P For optimum performance always ensure that all metallic or conductive parts are located under the antenna Do not shorten
16. es have a minimum achievable According to operating conditions they will improve According to the thickness and coverage metallization of the CDs DVDs performance will be reduced especially when dealing with multiple CDs DVDs packs August 2010 Revision 1 1 17 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods 6 Maintenance 6 1 Servicing the L SA4 SHD Antenna CAUTION The L SA4 SHD Antenna contains no operator serviceable parts and must only be serviced by qualified personnel No regular servicing is required except for keeping the unit clean It is recommended that the antenna unit be inspected at least once per year by an approved TAGSYS technical representative 6 2 Antenna Tuning When the L SA4 SHD Antenna is installed underneath the table or desk with the supplied mounting kit the reading performances can be significantly reduced If this happens it means that the table or the desk contains metallic parts or other magnetically conductive materials In such cases it is strongly recommended to use a different table made of a different material that does not present such attenuation or to change the location of the antenna under the table If this is not possible the antenna may be re tuned for a limited range with an aim to improve the reading range To re tune the antenna you have to use the TAGSYS Antenna Tuning Kit and perform the procedure described in the TAGS
17. oing by anyone other than TAGSYS e Any action on the product that prevents TAGSYS to perform an inspection and test of the Product in case of a warranty claim e Tampering with or abuse of the Product e Any use or incorporation by the Buyer or a third party of TAGSYS Product into life saving or life support devices or systems or any related products TAGSYS expressly excludes any liability for such use August 2010 Revision 1 1 21 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods 8 1 2 General Provisions This warranty sets forth the full extent of TAGSYS responsibility regarding the Product In any event TAGSYS warranty is strictly limited to at TAGSYS sole option the replacement the repair or refund of the Products purchase price to TAGSYS of Products considered as defective by TAGSYS The remedy provided above is in lieu and to the exclusion of all other remedies obligations or liabilities on the part of TAGSYS for damages whether in contract tort or otherwise and including but not limited to damages for any defects in the Products or for any injury damage or loss resulting from such defects or from any work done in connection therewith or for consequential loss whether based upon lost goodwill lost resale profits impairment of other goods or arising from claims by third parties or otherwise TAGSYS disclaims any explicit warranty not provided herein and any implied warranty guaranty o
18. ols A final analysis report will be sent to you as soon as possible Please contact your Quality Service representative for further details 33 0 4 42 18 89 36 This product bears the selective sorting symbol for waste electrical and electronic equipment WEEE This means that this product must be handled pursuant to European Directive 2002 96 EC in order to be recycled or dismantled to minimize its impact on the environment For further information please contact your local or regional authorities August 2010 Revision 1 1 23 23
19. ot use or store the device in dusty dirty areas Its moving parts can be damaged e Do not store in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics e Do not store in cold areas When the device warms up to its normal temperature moisture can form inside the device which may damage electronic circuit boards e Do not attempt to open the device Non professional handling of the device may damage it e Handle the device with care Shocks may break internal circuit boards e Do not clean the device with harsh chemicals cleaning solvents or strong detergents Gently wipe the device with a soft cloth slightly dampened in a mild soap and water solution e Do not paint the device Paint may clog the device s moving parts and prevent proper operation 1 3 Important Safety Information 1 3 1 Operating Environment Follow all special regulations that are applicable in any area and always switch off the device whenever its use is prohibited or when it may cause interference or danger August 2010 Revision 1 1 7 23 TAGSYS RFID L SA4 SHD Antenna User s Guide e connecting goods When connecting the device or any accessory to another device read its user s guide for detailed safety instructions Do not connect incompatible products As with all RF equipment users are advised that the equipment should only be used in its normal operating position
20. r representation as to performance quality and absence of hidden defects and any remedy for breach of contract which but for this provision might arise by implication operation of law custom of trade or course of dealing including implied warranties of merchantability and fitness for a particular purpose In all cases specific warranty conditions as described in the sales contract will always prevail 8 1 3 How to Return Defective Products The Buyer shall notify TAGSYS of the defects within 15 working days after the defects are discovered Defective Products must be returned to TAGSYS after assignment by a TAGSYS Quality Department representative of an RMA Return Material Authorization number No Products shall be returned without their proof of purchase and without the acceptance number relating to the return procedure All Products shall be returned with a report from the Buyer stating the complete details of the alleged defect Call 33 0 4 42 18 89 36 for return authorization and shipping address If returned Products prove to be non defective a charge will be applied to cover TAGSYS analysis cost and shipping costs If the warranty does not apply for returned Products due to age or application of a warranty exclusion clause a quote for replacement will be issued and no replacement will be granted until a valid purchase order is received If no purchase order is received within 30 days after the date of T
21. rformance distance For optimum performance the antenna must placed above the desk and not underneath Always ensure that metallic or conductive parts are located under the antenna 16 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 5 Operation L SA4 SHD Antenna can be set up in different ways The antenna configuration and choice of its components depend on the individual library The L SA4 SHD Antenna can be connected either to the Medio P200L L L100 or L P101 readers The following conditions must be followed for optimal reading performance of several items at once e Use of Folio 370 tags for books and CDs DVDs e Minimum book thickness of 15 mm e Maximum stack height of 150 mm with a maximum of 5 books e 4 different tagging positions for books please see Tagging documentation Performance is based on these parameters and may vary in function of the operating conditions When using CD tags we recommend spreading CDs DVDs over the antenna area with minimum overlapping of items as the metallic content of CDs DVDs may prevent correct tag reading by the antenna We also recommend the use ob BiblioDispack amp and or SCANAVOO for up to 4 CDs DVDs Table 2 Minimum Antenna Performance Parameter L SA4 SHD Using a single Folio 6 in 150 mm 370 tag CDs DVDs with 370 4 7 in 120 mm CD tag Folio 370 ISO 6 3 in 160 mm These performanc
22. the FCC and will void the TAGSYS warranty ANTENNA REQUIREMENT 47 CFR Section 15 203 CAUTION This equipment must be professionally installed The installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded Non professional installation or installation of the equipment with an improper antenna may void the equipment authorization from the FCC and will void the TAGSYS warranty The L P101 and Medio P200L have been designed to comply with FCC 47 CFR Part 15 Rules to apply with the LW1 Aero Ll L SA3 L SA4 and L SA4 SHD antennas Operation is subject to the following two conditions 1 The system devices may not cause harmful interference and 2 The system devices must accept any interference received including interference that may cause undesired operation 10 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide CAUTION When using L SA4 SHD with L P101 or Medio P200L readers one must be sure a ferrite is placed close to power supply jack connector 2 turns as shown below The ferrite is provided with LSA 4 SHD antenna 2 2 3 In Canada Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations 2 3 RoHS and WEEE Directives
23. with any equipment This warranty only applies to the Product and excludes all other equipment Optimal operation and performance of the Product are obtained by using TAGSYS readers by applying TAGSYS installation guidelines and by having your installation reviewed by a TAGSYS technical consultant The TAGSYS warranty does not cover the installation maintenance or service of the Product and is strictly limited to the replacement of Products considered as defective by TAGSYS and returned according to the return procedure defined below in such case TAGSYS will at TAGSYS option either replace every defective Product by one new Product or refund the purchase price paid by Buyer to TAGSYS for the defective Product 8 1 1 Warranty Exclusions The following conditions are not covered under the warranty e Defects or damages resulting from storage of the Product under conditions that do not comply with TAGSYS specifications or normal usage e Defects or damages resulting from use of the Product in abnormal conditions abnormal conditions being defined as any conditions exceeding the ones stated in the product specifications e Defects or damages from misuse accident or neglect e Defects from improper testing operation maintenance or installation e Defects from alteration modification except modifications or adjustments specifically described in this Product reference guide adjustment or repair or any attempt to do any of the foreg
24. x 1075 x 0 85 in Weight 2 0 kg 4 4 Ib Color Pantone P536 Blue Protection Class IP 21 Operating Temperature 0 to 55 C 32 F to 131 F Storage Temperature 25 to 60 C 13 f to 140 EI Figure 7 L SA4 SHD Antenna Dimensions in millimeters 288 263 230 4 x M4 Mounting brackets 17 7 2 Electrical Characteristics Description Value Maximum Input Power 1 2 W Operating Frequency 13 56 MHz Antenna Connection 50 Q BNC Connection Impedance 50 5Qand0 5 Typical Performances Reading 6 in 150 mm Tests results in laboratory with L P101 Library reader and a Folio 370 smart label in standard desktop configuration 20 23 Revision 1 1 August 2010 GI TAGSYS RFID e connecting goods L SA4 SHD Antenna User s Guide 8 Warranty Conditions 8 1 Warranty TAGSYS warrants that its L SA4 SHD Antenna Product shall comply with the functional specifications set forth herein for a period of one year from the date of delivery to the Buyer This warranty is valid for the original Buyer of the Product and is not assignable or transferable to any other party TAGSYS cannot be responsible in any way for and disclaims any liability in connection with the operation or performance of e any product in which the Product is incorporated e any equipment not supplied by TAGSYS which is attached to or used in connection with the Product e the Product
Download Pdf Manuals
Related Search