3DIM Tool 2.3.1 Operating instructions
Contents
1. Report Within the Report tab the title i e Company XYZ as well as the items of report chapter 1 General can be customized 3DIM File Name Date Time and PC opera tor are fixed To customize these items proceed as follows Step Activity 1 Click Settings within the menu bar XII 2013 31 General Operation 3DIM Tool 2 3 1 Select Report tab Include a report title into the respective field De Activate I report entries 4 to 6 and include a description for each activated field 5 Click Save Settings Display Coordinates Manufacturing mode Report Report title OSRAM 301M Tool Configuration Report entry 1 301M File Hame Report entry 2 Date Time Report entry 3 Operator Report entry 4 Report entry 5 Project Name Report entry 6 Project Order Number rn uminare Cancel The activated entries will be available for the user to fill in once a report is being crea ted See chapter Report 32 XII 2013 3DIM Tool 2 3 1 General Operation Report 3DIM Tool offers the possibility to create a configuration report Within this report all used parameters are documented A report can only be created once a configuration has been uploaded or downloaded To create a report proceed as follows Step Activity 1 Click Report in any upload or download confirmation window 2 The dialog for providing the general information for the report opens The availab2. SDIM Tool 2 3 1 Operating instructions XII 2013 Light is OSRAM Contents Version Dec 2013 Please note All information in this manual has been prepared with great care OSRAM however does not accept liability for possible errors changes and or omissions Please check www osram com or contact your sales partner for an updated copy of this manual Software updates To ensure the latest software version is used please consult the OSRAM website www osram com 3DIM in regular intervals once a month New versions will be released due to software improvements additional supported devices and bug fixing Description 3DIM Tool 2 3 1 Description Purpose and application The 3DIM Tool software is utilized for programming electronic control gears ECG from OSRAM equipped with the 3DIM functionality The connection between PC and ECG is established via the DALI magic hardware interface from OSRAM OSRAM 3DIM ECG families are POWERTRONIC 3DIM ECG for high pressure discharge lamps e OPTOTRONIC 3DIM ECG for LED modules What is 3DIM 3DIM embodies the combination of three different control and dimming options in one OSRAM ECG DALI Digital communication 3DIM ECG can be integrated in bidirectional telemanagement systems via the DALI interface DALI is a manufacturer independent well proven communication standard specifically developed for lighting applications StepDIM Midn
3. New configuration Creates a new configuration Load configuration Loads an existing configuration Saves the current configuration Upload to ECG s Sends the current configuration to the ECG s Download from ECG Displays the configuration of the ECG connected only possible with one ECG within the user inter face ar 8 XII 2013 3DIM Tool 2 3 1 User interface 3DIM ECG and 3DIM mode selection The three drop down menus are used for selecting the utilized 3DIM ECG and opera tion mode 3DIM ECG 3DIM mode CERAH IM ECG OT A MLE oe 2e NHM mad ee oe Workspaces The tabs are used to switch between StepDIM AstroDIM and OPTOTRONIC Config workspaces At any given time only workspaces are shown which are sup ported by the chosen ECG and operating mode _ StepDIM AstroDIM OPTOTRONIC Config Status bar At the bottom of the 3DIM Tool all information regarding the current state is displayed Communication state USB connection Status note Progress bar Communication 3DIM ECG Found 1 x OT 50 220 240 700 3DIMLT E Internal DALI voltage o DALI magic power supply DALI magic power supply No DALI voltage this is only displayed if no DALI magic is connected A yellow mark indicates that the DALI magic is only supplied by the USB port thus only 4 ECGs can be programmed simultaneously A green mark indicates that the DALI magic is supplied vi
4. ECG The devices of the PTo family and the OT 65 3DIM the values could differ much more because the location data and the reference date could not be stored on those ECGs 16 XII 2013 3DIM Tool 2 3 1 General Operation Sunrise Middle of the night yellow Date mark Sunset Dim level dark Night bright AstroDIM Night sequence over the year at the selected ECG location The date mark shows the sunrise and sunset for a certain day By default the date mark is located at the day with the longest night To display the times for another day select the respective date in the Date drop down menu Daylight saving time Date 23 12 2011 The lower diagram visualizes the ECG behavior on the selected day The switch on and switch off times are adopted from the chosen date While adjusting the dimming sequences it is recommended to check the dimming behavior at the longest and shortest day of the year The displayed start and end times for the two dimming levels will be converted into the ECG programming parameters which are referenced to the half operating time middle of the night yellow line for this selected day The time shift between midnight 00 00 and the half operating time middle of the night vary over the year and cause a variation of the dimming periods Therefore changing the date influences the specific AstroDIM programming parameters stored in ECG The displayed start and end times for each dimming level are only
5. equal to or higher than the Power on level The settable minimum value is limited according to the capabilities of the chosen ECG e Dim fade time in s Transition time between Power on level and Dim level and vice versa only config urable for OPTOTRONIC 3DIM ECG Note Both the Power on level and the Dim level are set according to the logarithmical dimming curve of the DALI standard For a detailed description please see IEC62386 102 table 9 1 If DIM level or the Power On Level is below the physical min level of the ECG the physical min level would be used XII 2013 11 General Operation 3DIM Tool 2 3 1 12 StepDIM Visualisation Power on level Dim level 100 90 80 Power N w 4 on oo N oO oO oO oO oO oO od oO On Dim start Dim end Off StepDIM ECG behaviour during the night SD Signal Dim start Dim end StepDIM Rendition of the SD state change in StepDIM DALI mode SD Signal Dim start Dim end StepDIM Rendition of the SD state change in StepDIM inverse DALI mode AstroDIM mode Select the AstroDIM tab to configure AstroDIM The workspace includes the setting and visualization of the ECG operating location as well as of the ECG behaviour Location selection Note To configure AstroDIM the operation location of the ECG must be specified first To do so either select a default location within the locations drop down menu or cre ate a new location Predefined l
6. the DALI magic hardware interface To utilize the monitoring feature of 3DIM Tool proceed as follows Monitoring Note Step 1 4 5 26 Activity Connect a 3DIMLT device to the DALI magic hardware interface See chapter Hardware installation Click Monitoring within the menu bar The monitoring window opens and the ECG is initialized Should an error message occur please proceed as indicated within the error message Monitoring of the connected ECG starts and provides the information as depicted below a refresh is made every 10 seconds The status flags appear grey under normal conditions or red ifthe respective state is present Click Cancel to close the monitoring window XII 2013 3DIM Tool 2 3 1 General Operation ECG status flags Monitoring state Elapsed time Monitoring OT 50 220 240 700 3DIMLT E Monitoring status Status LED module thermal shutdown LED module derating acitve ECG thermal shutdown System overload Open circuit Short circuit m Temperature Monitoring Temperature behaviour over last 30 minutes Measured NTC temperature Temperatures set within TPM Reset Reset 3DIM parameters This reset restores the default configuration of 3DIM mode StepDIM and AstroDIM parameters Proceed as follows Step Activity 1 Click Reset gt Reset 3DIM parameters in the menu bar 2 Confirm the warning dialog by cl
7. useable operating current range varies with the capabilities of the selected ECG If the max Operating current is out of the rated range it would be displayed in red e LEDset Protection enabled LEDset is an interface between LED modules and OPTOTRONIC constant cur rent LED power supplies It allows setting the output current of the electronic control gear ECG according to the needs of the LED module or LED luminaire In case the LEDset interface wiring to the LED module is interrupted the ECG switches into LEDset protection mode thus preventing damaging of the LED module This mode can be enabled or disabled by setting the respective checkmark If the LEDset port is not used it is recommended to disable the LEDset protection Note For a detailed description of LEDset please refer to the LEDset application guide www osram com LEDset 18 XII 2013 3DIM Tool 2 3 1 General Operation Constant Lumen Module CLM Constant Lumen Module CLM CLM enabled 7O 80 55 90 es o ce 30 kHrs kHrs Set LED module operating time kHrs The constant lumen feature is utilized to compensate the depreciation of the luminous flux of a LED module over life time The following parameters are used to define the adjustment of the depreciation e A checkbox to de activate the feature e A look up table for up to 8 data points consisting of the LED module operation time in KHrs and the relative output level of the max operating cur
8. valid if the switch on and off time for the ECG correspond with sunset and sunrise depicted in the 3DIM Tool Power on level Dim level 1 Dim level 2 Power Time on ECG site hrs Middle of the night yellow XII 2013 17 General Operation 3DIM Tool 2 3 1 OPTOTRONIC Config The features displayed within the OPTOTRONIC Config tab max operating cur rent setting CSM constant lumen output CLM and temperature protection module TPM are only settable for OPTOTRONIC constant current power supplies Note It is recommended to finish the OPTOTRONIC Config settings before setting AstroDIM and StepDIM parameters since a variation of the max operating current or the constant lumen function could impact the Dim level minimum percentage Current Setting Module CSM Current Setting Module CSM Maximum rated current Max operating current Minimum rated current Minimal dimming current LED set protection enabled The current setting module defines the nominal maximum operating current of the LED power supply This current can be set according to the demand and capability of the LED module s Max operating currents outside the rated range of the power supply are indicated in red Within CSM the following parameters can be configured e Max operating current in mA The max operating current can be varied between the minimum rated current and the maximum rated current in steps of 1 mA The
9. 00 for longitude between 180 000 and 180 000 In addition to the decimal input the coordinates can also be entered in degrees and minutes herefore the input method must be changed accordingly within the settings menu see chapter Settings Coordinate examples Latitude Longitude Latitude as Longitude as decimal value decimal value Munich 48 8 N 11 34 E 48 1397 11 5744 New York 40 42 N 74 O W 40 7127 74 0058 Sydney 33 51 S 191 12 E 33 8500 151 2000 If the geographical coordinates for a given ECG operating location are not available they can be determined amongst others in the following ways Determining decimal coordinates via Google maps Step Activity 1 In your web browser open the following website http maps google com 2 Enter the location i e the name of a city you are seeking into the search field and click Search Maps 3 Right click on the location of the ECG within the map and select What s here in the context menu 4 The coordinates are displayed in decimal form as Latitude Longitude in the search field Determining coordinates via Wikipedia Step Activity 1 In your web browser open the following website http en wikipedia org 2 Enter the location i e the name of a city you are seeking into the search field at the top right corner and confirm with the return key 3 The Wikipedia entry of the location opens the coordinates are displayed in degre
10. 1 Hardware installation To program OSRAM 3DIM ECG s a connection between ECG s and PC must be established first It is possible to program up to 64 ECGs of the same type simultane ously Step Activity 1 Connect DALI magic and PC with the enclosed USB cable 2 If more than 4 ECGs are programmed simultaneously the external 6 V DC power supply for the DALI magic must be used Connect the OSRAM 3DIM ECG to mains Connect the DALI terminals of the DALI magic with the DALI inputs of the ECG s Note It is recommended to disconnect the USB connection between PC and DALI magic only after closing the 3DIM Tool Wiring diagram Optional power supply up to 64 devices DALN 1 Up to 4 ECGs can be programmed without external power supply only if no other USB devices are connected to the PC USB port overload needs to be avoided 6 XII 2013 3DIM Tool 2 3 1 User interface Basic layout Header Menu bar CA Test Idim OSRAM Mli Tool User interface Tool bar 3DIM ECG and mode selection 3DIME OSRAM JDIH DCG OT IVER BO ALTE Set JOIM mac Stepb RL spo asec CeIGIHOMICm Cong m M r Savings per yenr up to 391 Opening lessen al the 3M EEE Location Fee Da re re 2093 14 5 16 17 18 19 20 21 22 23 OO OF 02 03 04 OS 06 OF 08 00 W 11 12 ECG location time hrs The rami le ered fered re ary du ie ihe deren been Dallas mage lappe ged acha chen ee
11. 999 personal identification number PIN can be used to lock 3DIM Tool in Manufacturing mode This PIN does not need to be identical to the one protecting the 3DIM Tool OPTOTRONIC Config parameters XII 2013 3DIM Tool 2 3 1 General Operation De Activating manufacturing mode Proceed as follows Step Activity 1 Click Settings in the menu bar 2 Select Manufacturing mode tab 3 De Activate manufacturing mode by setting or removing the tick mark 4 Click Save Note If the tick mark for de activating manufacturing mode is not selectable a PIN was used to protect manufacturing mode Please enter this PIN within the PIN unlock device field to regain control over the manufacturing mode de activation Setting the manufacturing mode PIN Proceed as follows Step Activity 1 Click Settings in the menu bar Select Manufacturing mode tab Enter current PIN in the PIN unlock device field Click Set Change PIN Enter the new four digit PIN in the New PIN field Repeat the new four digit PIN within the Confirm PIN field Click Set Change PIN Click Save COl N O oO AJOJN Deleting manufacturing mode PIN Proceed as follows Step Activity 1 Click Settings in the menu bar Select Manufacturing mode tab Include current PIN in the PIN unlock device field Click Set Change PIN Click Reset PIN Click Save OIOI AJOJN
12. AstroDIM and StepDIM graphs as well as certain input methods can be adjusted Also the 3DIM Tool can be locked in manufac turing mode Display preferences Display Coordinates Manufacturing mode Report AstroD lM display C Show month lines C Show sunrise and sunset extremes C Show all timezones Dimming graph display C Display hour lines C Display Dim level aid lines Cancel AstroDIM graph display Within the visualisation of the night lapse in AstroDIM mode aid lines as well as XII 2013 3DIM Tool 2 3 1 General Operation sunrise and sunset times can be displayed Proceed as follows Step Activity 1 Click Settings in the menu bar 2 Select respective tick mark within the AstroDIM display frame of the Dis play tab 3 Click Save Displaying all time zones By default only one entry per time zone is visible in the time zone drop down menu of the ECG location dialog See chapter AstroDIM mode gt Creating a location As an option a complete list of time zones can be displayed Proceed as follows Step Activity 1 Click Settings in the menu bar 2 De activate Show all time zones 3 Click Save AstroDIM StepDIM ECG behaviour display Depending on personal preferences guidelines for the dimming visualisations can be displayed Proceed as follows Step Activity 1 Click Settings in the menu bar 2 Check the checkbox of the respective guidel
13. Ohm Naming NCP15XW153E 390 15k 5 NCP18XW153J03RB Naming NCP18XW153J 47k 3 Epcos B57423V2473H062 Naming EPCOS B57423V2473H e Start derating in C Starting temperature for the linear decreasing of the output level e End derating in C Temperature until the output level is decreased Also temperature at which the LED module s is switched on again after it has been switched off for over temperature protection see next bullet point XII 2013 3DIM Tool 2 3 1 General Operation e Shut off temperature in C Temperature at which the LED module s is switched off for over temperature protection e Dim level lower limit in Output level at End derating temperature The linear decreasing of the output will be carried out between 100 and the value set within this field P Tapaau Protectan Module PH Tenge ature Frotecton Hakaa TP i Spire Lael Hirt whe baie its C Fiti NTC barad Br beet ACP FAFA 1i Silai chet bray Bil a Erd der a T Shu ee T m W Diria biret kaani lat au a 4 The monitoring feature of 3DIM Tool provides the possibility to double check the TPM settings See chapter Monitoring OPTOTRONIC Config password protection XII 2013 Since a false setting of the OPTOTRONIC Config parameters can have severe consequences on the safety of the luminaire i e damaging the LED module it is pos sible to lock the OPTOTRONIC Config parameters wit
14. a the external power supply up to 64 ECGs can be programmed Ared mark indicates that the voltage on the connection terminals of the con nected DALI Magic is higher than the maximum permitted DALI voltage Communication state Ablue mark indicates communication via the DALI line USB connection 3 DALI magic not connected to USB DALI magic connected to USB Status note The message displayed summarizes the current state and task executed Progress bar During search upload or download the progress of the executed task is displayed here XII 2013 9 General Operation 3DIM Tool 2 3 1 General Operation Principle 3DIM Tool is designed to immediately visualise parameter changes made by the user This display provides the user with an indication how the 3DIM ECG will behave in subsequent operation The steps described below can be carried out in any order although for OPTOTRONIC constant current devices it is recommended to first set up the OPTOTRONIC Config parameters Selecting ECG type and 3DIM mode 10 Note For a detailed description of the 3DIM modes please refer to the 3DIM application guide www osram com 3dim 3DIM ECG 3DIM mode OSRAM IM ECG OT ET MLE Ee Set JOM made StepCNL Aas ATLL oe 3DIM ECG type The utilized 3DIM ECG is selected via the left drop down menu 3DIM mode Depending on the selected ECG different 3DIM modes right drop down menu are available T
15. ameter setting The AstroDIM operation is individually configured by means of the following param eters e Power on level in Output power level in of the nominal value of the ECG lamp combination after switch on via mains The settable minimum value is limited according to the capa bilities of the chosen ECG The Power On Level in the 3DIM Tool corresponds to the DALI Power On level and System Failure Level e Dim fade time in s Transition time between Power on level and Dim level and vice versa only configurable for OPTOTRONIC 3DIM ECG XII 2013 15 General Operation 3DIM Tool 2 3 1 e Two dimming levels with the second level being optional Each level is defined by Start time in hh mm Time at which the dimming level starts End time in hh mm Time at which the ECG changes to the next level Dim level in Output power level in of the nominal value of the ECG lamp combination for the respective dimming level A level must not necessarily be lower than the Power on level or the previous dimming level The settable minimum value is limited according to the capabilities of the chosen ECG Note Both the Power on level and the Dim levels are set according to the logarithmi cal dimming curve of the DALI standard For detailed description please see IEC62386 102 table 9 1 If DIM level or the Power On Level are below the physical min level of the ECG the physical min level will be use
16. d Power on level 100 Lim level 1 Stark time End time Dim level Dim level 2 Dim level 2 enabled Shark time End time Dim level Dim fade time 181 0 A Energy savings display 3DIM Tool estimates the maximum annual savings in which can be achieved by using AstroDIM This estimation is based on the assumption that the ECG is operated according to the ideal night as it is displayed within the AstroDIM night lapse visualisa tion and the minimum dimming level is above or equal the Physical Min Level Savings per year up to 10 AstroDIM Visualisation The top graph shows the night sequence over the year at the selected ECG location Sunsets are represented by the lower line and sunrises are represented by the upper line The night therefore corresponds to the enclosed light orange area The arithmetic mean of the night is represented by the yellow line The darker areas correspond to the times at which the ECG is operated in the first or second dimming level 2 If the real switch on off times differ from the sunset and sunrise depicted in 3DIM Tool course of the night visualisation the dim start and end may also vary according to this offset For a detailed description of the AstroDIM behavior please refer to the 3DIM application guide The displayed start and end times could differ between 2 5 minutes between the uploaded and the downloaded data due to the convertion accuracy of the
17. d is not suffici ent to support the range of functions of the 3DIM Tool Troubleshooting Step Activity 1 Select Help gt About OSRAM 3DIM Tool within the menu bar 2 Select the Firmware update tab 3 Click Browse 4 Select the ofw file at least v2 18 and click Open The latest firm ware version is contained in the Firmware subdirectory of the root directory 5 Click Start firmware update Confirm the appearing warning message with Yes 6 After the update is complete the progress bar stops and the following message appears Send firmware to device Compare checksum Checksum ok Start update DO NOT unplug the device Reset device All LEDs of the DALI magic are switched off Disconnect the USB connection between the DALI magic and PC Confirm error message with OK possibly a second error message needs to be confirmed also Close 3DIM Tool 10 Reconnect the DALI magic to the PC and restart 3DIM Tool More than one DALI magic connected This occurs if two or more DALI magic are connected to the PC Troubleshooting Step Activity 1 Disconnect the USB connection of the DALI magic which is not utilized for programming the ECG s 2 Confirm error message with OK Upload failed The connected ECG differs from the 3DIM Tool selection This occurs if 3DIM ECG selected within the 3DIM ECG drop down menu does not match with the conn
18. e e APC or notebook with the following specification Pentium M processor 1 GB main memory Windows XP Windows Vista or Windows 7 both 32 or 64 bit 40 MB hard disk memory Monitor with a resolution of 1024x768 or 1024x600 pixels the recommended zoom factor is 100 Afree USB 2 0 port Software installation 3DIM Tool can be downloaded via www osram com 3dim After the download the 3DIM Tool appears as ZIP file in download folder E osram Sdir kaol softs are Version x x Two different versions of the 3DIM Tool can be installed e Normal mode All configuration features are available e Manufacturing mode Only prepared configurations can be uploaded Normal mode is designed for creating configurations as well as testing 3DIM and OPTOTRONIC Config parameters during luminaire development or installation design Manufacturing mode is set up for usage in production only enabling the upload of a predefined configuration It is recommended to install only manufacturing mode on PCs utilized in production Step Activity 1 Double click the ZIP file 2 Within the ZIP folder double click the setup file The installation wizard appears 3 Follow the instructions of the installation wizard 3DIM Tool is executed via Start gt All Programs gt OSRAM gt 3DIM Tool or by double clicking the desktop icon normal or manufacturing mode XII 2013 5 Installation 3DIM Tool 2 3
19. ected ECG s Troubleshooting XII 2013 3DIM Tool 2 3 1 XII 2013 Troubleshooting Step Activity 1 Check which ECG type has been connected to the DALI magic Select the same ECG type within the 3DIM ECG drop down menu Double check if the current configuration is suitable for the utilized ECG Confirm error message with OK or BR W Nh Repeat the upload process Communication failures The following communication errors can occur e Download failed e Upload failed e Reset failed e Reading GTIN failed e Addressing of ballasts failed e Searching for ballasts failed e Check Connection DALI mains Troubleshooting Step Activity 1 Check ECG power supply 2 Check DALI wiring between ECG s and DALI magic 3 Disconnect and reconnect USB connection between DALI magic and PC 4 Make sure the connected ECG s and the ECG selected within the 3DIM ECG drop down menu match O1 Confirm error message with OK Repeat the upload download or reset process Unknown ECG Only OSRAM 3DIM ECG can be programmed with the 3DIM Tool If another kind of ECG s is connected the 3DIM Tool will stop the upload download or reset Troubleshooting Step Activity 1 Disconnect ECG s 2 Confirm error message with OK 3 Only proceed using 3DIM Tool with OSRAM 3DIM ECG s More than X device s connected 3DIM Tool stops the current process if too many ECG s for the initiated pr
20. es and minutes directly below the search field A left click on the coordinates opens a new browser window here the coordinates are also displayed in decimal form 14 XII 2013 3DIM Tool 2 3 1 General Operation Create location Step Activity 1 Open the ECG location dialog 2 Include location name latitude and longitude 3 During the input of the coordinates a pre selection of the time zone is made Please check if the time zone is correct and change it if necessary By default only one entry per time zone is available within the drop down menu This can be changed within the settings menu 4 Click Save to adopt the new location into the location drop down menu Edit location Step Activity 1 Open the ECG location dialog 2 Select the respective location within the drop down menu 3 Edit the location parameters 4 Click Save Delete location Step Activity 1 Open the ECG location dialog 2 Select the respective location within the drop down menu 3 Click Delete Selection of summer winter time daylight saving time Setting or removing the Daylight saving time tick only mark changes the visualisation of the night lapse accordingly and the start and end times for the two dimming levels and the selected day The ECG paramters for the dimming profile are not affected This is to indicate how the device will behave during daylight saving time Daylight saving time F AstroDIM par
21. h a four digit 0000 to 9999 personal identification number PIN This PIN has no influence upon StepDIM or AstroDIM parameters these can still be reprogrammed without any restrictions If the ECG has been locked with a PIN an upload and therefore changing the OPTOTRONIC Config parameters only works if the correct PIN has been entered in the PIN field Note It is only possible to program multiple ECGs if they have the same PIN PIN entry field PIN visualization Set Change PIN FIN unlock device Set Change FIN Setting a password By default the ECG have no password set The following steps are necessary to lock the ECG with a PIN Step Activity 1 Click Set Change PIN in the OPTOTRONIC Config tab 2 Enter the four digit PIN in the New PIN field 3 Repeat the four digit PIN within the Confirm PIN field 4 Click Set Change PIN within the dialog 21 General Operation 3DIM Tool 2 3 1 Set Change PIN New FIN 1234 Confirm FIN 1234 Set Change PIN Reset PIN Now OPTOTRONIC Config parameters within the ECG will be locked with the PIN after the configuration has been uploaded to the ECG Changing a password Note The PIN change is valid after uploading the configuration Therefore the old PIN still needs to be used for the upload following the PIN change see Step 1 Step Activity 1 Enter the correct PIN in the PIN unlock device field Click Set Change PIN i
22. icking Yes 3 Restart disconnecting and reconnecting the power supply the ECG Note For a detailed description of the default parameters please refer to the data instruction sheet of the utilized ECG Delete AstroDIM power on history This reset deletes the memory of the operating hours of the last eight nights which XII 2013 27 General Operation 3DIM Tool 2 3 1 Settings 28 is used to enable the autonomous dimming The reset is recommended once the operating location of the ECG changes or if several days lie between reprogramming and deployment Proceed as follows Step Activity 1 Click Reset gt Delete AstroDIM power on history in the menu bar 2 Confirm the warning dialog by clicking Yes 3 Restart disconnecting and reconnecting the power supply the ECG Reset LED module operating time This reset deletes the LED module operating time counter within the ECG This feature should be used if the LED module is exchanged with a new one Proceed as follows Step Activity 1 Click Reset gt Reset LED module operating time in the menu bar 2 Confirm the warning dialog by clicking Yes 3 Restart disconnecting and reconnecting the power supply the ECG Note Both the CLM look up table and the checkmark for de activating the CLM function are not deleted this has to be done by correcting the respective configuration Via the settings menu the appearance of the
23. ight step down Half night switch StepDIM is used in installations where a dedicated high voltage control line switched phase in addition to the mains supply is available This additional phase is connected to the StepDIM port SD terminal of the ECG For StepDIM two switching logics are available StepDIM Control line not live equals default value Power on level Control line live equals Dim level e StepDIM inverse Control line live equals default value Power on level Control line not live equals Dim level AstroDIM Dimming without external control AstroDIM is ideal if there is no way to dim the ECG by dedicated control lines DALI or StepDIM interface not available due to a lack of infrastructure It allows autonomic dimming in two steps via an integrated time actuator no real time clock More information on 3DIM as well as a detailed application guide is available at www osram com 3dim Note The 3DIM Tool is used only for the configuration of StepDIM AstroDIM and some specific parameters for OPTOTRONIC constant current ECGs It is not possible to send individual DALI commands with 3DIM Tool For this purpose OSRAM offers the DALI wizard software which is also used in combination with a DALI magic www osram com Ims magic 4 XII 2013 3DIM Tool 2 3 1 Installation Installation System requirements The minimum system requirements for the 3DIM Tool are e OSRAM DALI magic incl USB cabl
24. ine within the Display tab 3 Click Save XII 2013 29 General Operation 3DIM Tool 2 3 1 30 Defining coordinate formats Depending on the source for the ECG operation location in AstroDIM mode different input methods for coordinates can be defined Display Coordinates Manufacturing mode Report 6584 location fe g 48 8 23 N 11 34 28 E WGS84 decimal location fe g 48 7397 11 5744 cave Cancel Proceed as follows Step Activity 1 Click Settings in the menu bar 2 Choose decimal or WGS 84 format by setting and removing the tick mark within Coordinates tab 3 Click Save Manufacturing mode To support quality assurance in luminaire production 3DIM Tool has a dedicated Manufacturing mode Here only the possibility to upload a predefined configuration remains no parameter changes can be made Manufacturing mode is started via a dedicated executable by double clicking a configuration file 3DIM or manually via the settings menu Within the Manufacturing mode tab it is possible to set upload or download reports to be mandatory Confirmation with auto report generation or optional Confirmation without auto report generation For a detailed description see chapter Report amp Settings Display Coordinates Manufacturing mode C Activate manufacturing mode PIN unlock device Set Change PIN Cancel A four digit 0000 to 9
25. le fields correspond to the configurations made within the Report tab of the Settings menu 3 Fill in the empty fields FillReportDataForm Report title OSRAM 3DIM Tool Configuration 3DIM File Name lt empty gt Date Time 4 17 2013 20 38 Operator lt empty gt Luminare Type Project Name Project 201301 Project Order Number 987654321 4 Click OK Save report Print report GE Report of the 3VIM OPTOTRONIC parameters Save Print the report A OSRAM 3DIM Tool Configuration OSRAM 3DIM Tool Version 2 1 0 0 1 General 3DIM File Name empty Date Time 4 17 2013 20 38 J Operator empty Luminare Type A Project Name Project 201301 Project Order Number 987654321 2 Ballasts XII 2013 33 General Operation 3DIM Tool 2 3 1 Print report Reports can be printed via a local or network printer Step Activity 1 Click Print report within the report window 2 A standard print preview opens up 3 Set up page and printer acc to available printing hardware and needed format 4 Press Print document within the print preview Save report Reports can also be saved as htm file to be viewable with a web browser Step 1 2 3 LOG Files Activity Click Save within the report window Select a folder via the Save in drop down menu and enter a file name for the configuration The file type needs
26. loading a configuration alternative A Step Activity 1 Double click the 3dim file which shall be used with the ECG s Listen OT 50 301M Munich Mainstreet LED luminaire 1 2 The 3DIM Tool opens Manufacturing mode visualizing the selected configuration Check ifthe displayed configuration is correct Click amp within the menu bar to upload the configuration Depending on the configuration within the settings menu Manufac turing tab a report can or must be created by clicking Report See chapter Report 6 Finally confirm upload success with OK Uploading a configuration alternative B Step Activity 1 Start 3DIM Tool Manufacturing OSRAM 3DIM Tool xx ManuFactoring 3DIM Tool opens no particlar configuration is selected Click ir and select the configuration which should be utilized Check ifthe displayed configuration is correct Click amp within the menu bar to upload the configuration Depending on the configuration within the settings menu Manufaturing tab a report can or must be created by clicking Report See chapter Report 7 Finally confirm upload success with OK 36 XII 2013 3DIM Tool 2 3 1 Troubleshooting Troubleshooting General error handling This chapter describes strategies to solve errors which might occur during the utilization of 3DIM Tool Should the solutions depicted do not solve the issue please contac
27. n the OPTOTRONIC Config tab Enter the four digit PIN in the New PIN field Repeat the four digit PIN within the Confirm PIN field Click Set Change PIN within the dialog or BR w Nh Deleting resetting a password SER reset is valid after uploading the configuration Therefore the old PIN still needs to be used for the upload following the PIN reset see Step 1 Step Activity 1 Enter the correct PIN in the PIN unlock device field 2 Click Set Change PIN in the OPTOTRONIC Config tab 3 Click Reset PIN within the dialog Password visualisation The PIN visualisation indicates the status of the ECG before and after the upload The right lock refers to the state before the upload the left to the state after the upload 22 XII 2013 3DIM Tool 2 3 1 General Operation PIN state within the ECG before upload PIN state after upload a gt a af af The connected ECG s are not locked with a PIN After the upload they won t be locked with a PIN either oe The connected ECG s are not locked with a PIN After the upload they will be locked with a PIN a The connected ECG s are locked with a PIN After the upload they will still be locked with a PIN The connected ECG s are locked with a PIN After the upload they won t gt a be locked anymore Upload Download If an upload or download has been triggered 3DIM Tool first scans for connected 3DIM ECG s This
28. o be compliant with the DALI standard each 3DIM mode includes the possibility to control the ECG via DALI commanas e StepDIM AstroDIM DALI wiring selection The wiring of the ECG decides whether StepDIM AstroDIM or DALI mode is per formed after switching on the ECG For the different wiring schemes please refer to the ECG data sheet or the 3DIM application guide e StepDIM DALI StepDIM as well as DALI can be used e StepDIM inverse DALI StepDIM inverse as well as DALI can be used e AstroDIM DALI AstroDIM as well as DALI can be used e DALI Only DALI can be used XII 2013 3DIM Tool 2 3 1 General Operation StepDIM mode Select the StepDIM tab to configure StepDIM The workspace consists of the param eter setting frame and the visualization of the ECG behaviour StepDIM Parameter setting Power on level 100 Dir level 1 Dim level Dim Fade time StepDIM operation is defined by three parameters e Power on level in Output power level in of the nominal value of the ECG lamp combination after switch on via mains The settable minimum value is limited according to the capa bilities of the chosen ECG The Power On Level in the 3DIM Tool corresponds to the DALI Power On level and System Failure Level e Dim level in Output power level in of the nominal value of the ECG lamp combination after the control wire is switched SD state change The Dim level may be lower
29. o the PIN unlock device field to change the OPTOTRONIC Config parameters of the ECG Configuration handling Saving a configuration Proceed as follows Step Activity 1 Click File gt Save as in the menu bar or bral in the toolbar islet ei Eris 2 Select a folder via the Save in drop down menu and enter a file name for the configuration The file type needs to be OSRAM 3DIM 3dim 3 Click Save The selected name appears in the header of the 3DIM Tool Loading a configuration Proceed as follows XII 2013 25 General Operation Step 1 Note 3DIM Tool 2 3 1 Activity Click File gt Load configuration in the menu bar or a in the toolbar Select the folder which contains the configuration file via the Look in drop down menu Open the configuration by double clicking The name of the loaded configuration appears in the header of the 3DIM Tool A configuration can also be loaded by double clicking the file within the Windows Explorer Thus the configuration will always be loaded in manufacturing mode see chapter Manufacturing mode The Monitoring window enables a double check of the TPM settings made i e du ring the luminaire testing within the OPTOTRONIC Config tab The complete monitoring functionality is only available for OPTOTRONIC 3DIMLT devices Monitoring only works if just one ECG is connected to
30. oDIM into consideration Thus displays the actual output current at any time except where the LEDset interface is used to adjust the output current Temperature Protection Module TPM TPM allows for a two way protection of the LED module s against too high tempera tures e Standard resistor based Flexible NTC based If Standard resistor based setting is selected the OPTOTRONIC LED power supply starts lowering the output level if the resistance is below the start derating resistance This linear decreasing 100 to 50 is carried out until the end derating resistance The LED module s are switched off once the resistance undershoots the switch off derating resistance and switched on again ifthe resistance exceeds end derating resistance Ingram Priechor hakda TFA laipa Frans Morus TPH E Standard Mita value based ID X Fishi NTC batad Silai desahre EA kh Ered deat ua Wik Sech off at i a3 k hm Note For selecting the correct resistor for each application please refer to the data sheet of the OPTOTRONIC LED power supply If the Flexible NTC based setting is selected the temperature protection behaviour can be programmed individually Therefore the following parameters can be set e Sensor type The used NTC needs to be selected within the respective drop down menu The following NTC are available in 3DIM Tool 10k 5 NCP18XH103J03RB Naming NCP18XH103J 15k 3 NCP15XW153E03RC 390
31. ocation could not be modified In the case the location data in the ECG is not matching with any predefined location customized will be shown XII 2013 3DIM Tool 2 3 1 General Operation Operating location of the 301M ECG Location Testing Location Change Create location Location selection The coordinates and the time zone for each location could be visualized by moving the mouse above the drop down menu arrow Operating location of the 301M ECG Location Munich Longitude 11 65 Latitude 48 13 Baia anand Time zone UTC 01 00 Date 23 12 2013 Creating a location To create a location click the button to the left of location drop down menu The ECG location dialog opens The coordinates and the time zone for each location could be visualized by moving the mouse above the drop down menu arrow Location visualization amp ECG location Location Testing Location Latitude 48 000 Longitude 11 000 Time zone GMT 01 00 Belgrad Bratislava Budapest Ljubljana Prag see Co Bee Geet Location name Latitude Longitude Time zone XII 2013 13 General Operation 3DIM Tool 2 3 1 Each location is defined by the following properties e Location name Latitude Longitude e Time zone Latitude and longitude are entered in decimal form with up to four decimal places as standard Admissible input values for latitude are values between 65 000 and 65 0
32. ocess are connected Depending on the chosen DALI magic power supply either a maximum of 4 internal power supply or 64 external power supply devices can be programmed simultane ously 39 Troubleshooting 40 3DIM Tool 2 3 1 A configuration download can only be triggered if just one 3DIM ECG is connected Troubleshooting Step 1 Activity Upload Disconnect all ECGs except 4 internal power supply respective 64 external power supply Download Disconnect all ECGs except one Confirm error message with OK Repeat upload download or reset DALI short circuit This failure has two possible reasons either a short circuit within the DALI line or too many connected ECGs To resolve this issue proceed as follows Step 1 Activity Check DALI wiring and remove potential short circuits between the two DALI lines Check if only the allowed amount of ECGs is connected e 4 if the internal power supply of the DALI magic is used e 64 if the external power supply is used Disconnect and reconnect the DALI magic USB connection Confirm error message with OK XII 2013 3DIM Tool 2 3 1 XII 2013 41 www osram com 3dim OSRAM GmbH Steinerne Furt 62 86167 Augsburg Germany www osram com
33. onnec tions 3 Perform luminaire test functionality and safety Note For LED luminaire manufacturing steps 1 and 2 need to be performed in the correct order and should not be interchanged Otherwise the LED module will be driven with maximum possible output current of the ECG e g 700 mA which could damage the LED module i e in case of a 350 mA module Only if the current is set via LEDset it is possible to interchange steps 1 and 2 Installing 3DIM Tool Proceed as follows Step Activity 1 Double click the Setup OSRAM 3DIM Tool 2 3 1 0 0 ZIP file 2 Within the ZIP folder double click the setup file The installation wizard appears 3 Choose 3DIM Tool manufacturing as installation type 3DIM Tool full C 301M Tool manufacturing Shortcut Documentation 4 Follow the instructions of the installation wizard to complete the setup Programming 3DIM ECG s Note To ensure full compatibility of all configuration files created in the past 3DIM Tool version 2 2 2 or higher needs to be used All PCs between which configuration files are shared need to have 3DIM Tool version 2 2 2 or higher installed For the procedure depicted in the following it is necessary to have a prepared 3dim file containing the configuration which shall be utilized The upload of a configuration to the ECG s can be carried out in two ways XII 2013 35 Utilizing 3DIM Tool in Production 3DIM Tool 2 3 1 Up
34. re ge Workspace Status bar Menu bar The basic functions are available via the menu bar Submenus or dialogs are opened by clicking an entry in the menu bar The menu contains the following elements each with the listed sub items File New configuration Load configuration Save Save as Exit Transfer Upload to ECG s Creates a new configuration Loads an existing configuration Saves the current configuration Saves the current configuration under a new name Closes the software Sends the current configuration to the ECGs Download from ECG XII 2013 Displays the configuration of the ECG connected only possible with one ECG within the user interface User interface 3DIM Tool 2 3 1 Monitoring Opens the Monitoring window Settings Opens the Settings menu Reset Reset 3DIM parameters Restores 3DIM factory settings Delete AstroDIM power on Deletes AstroDIM operating hour memory history Reset LED module opera Resets the LED module operating time to 0 Only ting time possible for OPTOTRONIC constant current ECG Note Each reset requires a restart disconnecting and reconnecting the power supply of the ECG Flag icon Allows for selecting the GUI language After the language has been changed a restart of 3DIM Tool is necessary Help Icon About OSRAM 3DIM Tool Opens the About dialog Toolbar The toolbar provides instant access to the most important features
35. rent in The valid range for the LED module operating time is 0 to 254 kHrs for the operating current output level it is 70 to 100 e A checkbox and input field in kHrs for setting the LED module operating time within the ECG Only if the checkbox is ticked the value of the input field is written to the ECG The valid range for the LED module operating time is 0 to 254 kHrs A new data point is added to the look up table once a start time in KHrs is included a data point is deleted once its start time is deleted Note In case an installed LED module failed or an old one is replaced the LED operating time counter needs to be reset This is done by selecting Reset LED module opera ting time within the Reset menu CLM and CSM visualisation Maximum rated current Operating current Max operating current LED module current 700 i i H E a TE r a De ee u et Be ee RUHE i 33 1 kHrs 641 mA ben ai un san a E nn te nn Da en a ea ee De ng eine ns A Da N na E na au Te ne e ae a 570 mA ee Ver Le N ER a 82 Operating current mA 20 00 25 00 30 00 35 00 LED module operating time kHrs Minimum rated current LED module operating time Data point tool tip uploaded to the ECG XII 2013 19 General Operation 3DIM Tool 2 3 1 20 Note The display of the operating current orange line is also taking the Power on level set via StepDIM or Astr
36. scanning process can be tracked within the status bar at the bot tom of the software Once the detection is finished the upload or download is initiated Uploading a configuration Note To ensure full compatibility of all configuration files created in the past 3DIM Tool version 2 2 2 or higher needs to be used All PCs between which configuration files are shared need to have 3DIM Tool version 2 2 2 or higher installed An upload only works if e The ECG selected in the 3DIM ECG drop down menu is identical to the connec ted ECG s e All ECG connected are of the same type version and PIN Step Activity Click Transfer gt Upload to ECG in the menu bar or in the toolbar 2 Within the status bar the progress of the upload can be tracked XII 2013 23 General Operation 3DIM Tool 2 3 1 After the upload is finished one of three possible confirmation dialogs is displayed Upload configuration Upload to 1 PTo 507 220 240 3DIM v Steph and AstroD M parameter upload successful Upload confirmation ECG without OPTOTRONIC Config features 3DIM mode as well as StepDIM and AstroDIM parameters uploaded Upload to 1x OT 50 220 240 700 3DIMLT E Step DIM and Astro DIM parameter upload successful WARNING OPTOTRONIC Config parameters not uploaded Wrong PIN Upload confirmation ECG with OPTOTRONIC Config features Only 3DIM mode as well as StepDIM and AstroDIM parameters uploaded Parame
37. t the OSRAM customer service center To improve and speed up the support it is highly recommended to create a diagnose file and to provide this along with your inquiry Creating a diagnose file Step Activity 1 Select Help gt About OSRAM 3DIM Tool within the menu bar 2 Select the Diagnose tab 3 Click Create diagnose file 4 Select a folder via the Save in drop down menu and enter a file name The file type needs to be ZIP 5 Click Save If a failure is detected it is immediately visualized via a popup message at the top of the user interface eml S More than one DALI magic connected Note In the unlikely event of an error message which is not described within the subchap ters below please proceed as follows Step Activity 1 Confirm error message by clicking OK 2 Close 3DIM Tool Optionally save the current configuration before closing the software Disconnect the DALI magic hardware interface Restart the PC and reconnect the DALI magic hardware interface Make sure the DALI magic is connected directly to a USB port of the PC do not use a USB hub 5 Restart 3DIM Tool ox Magic The fimmware of the controller is too old OSRAM 3DIM ECG OT 50 220 240 700 3DIMLT E XII 2013 37 Troubleshooting 3DIM Tool 2 3 1 38 The firmware of the controller does not have the required version This message appears if the firmware version of the DALI magic utilize
38. ters of the OPTOTRONIC config features are not uploaded due to the wrong pin Upload to 1x OT 50220 2407 700 3DIMLT E J Step DIM and AstroDIM paramester upload successful OPTOTRONIC Configparameter upload successful Upload confirmation ECG with OPTOTRONIC Config features All parameters uploaded Clicking OK within the confirmation closes the message clicking Report opens the documentation dialog See chapter Report Downloading a configuration Note A download only works if just one ECG is connected Step Activity 1 Click Transfer gt Download from ECG in the menu bar or in the toolbar 2 Within the status bar the progress of the download can be tracked 24 XII 2013 3DIM Tool 2 3 1 General Operation After the download is finished a confirmation dialog is displayed Download configuration Download 1 x OT 50220 240700 SDIMLT E 7 Farameter download successful Download confirmation Clicking OK within the confirmation closes the message clicking Report opens the documentation dialog See chapter Report After the download is finished the configuration stored within the ECG is visualized in the user interface If the OPTOTRONIC Config parameters of the connected ECG are locked with a PIN the PIN visualisation will be displayed as shown here PIN unlock device Set Change FIN This indicates that a PIN needs to be included int
39. to be Webpage HTML only htm html encoding is Unicode Click Save 3DIM Tool creates automatically up to 5 000 LOG files for loading configuration from the ECG READReport_YY_MM_DD_hh_mm_ss and transferring data to the ECG WriteReport_ YY MM _DD_hh_mm_ss If the maximum number of LOG files are exceeded the older versions would be deleted Therefore it is recommended to copy and store regularly the files on a separate file server The LOG Files are stored under MY DOCUMENTS OSRAM OSRAM 3DIM Tool LOG OLD The LOG File shows the parameters read from or write to the ECG u old 25 11 2013 08 05 Dateiordner kl 2013_11_25 08_05_22 Log 25 11 2013 08 10 Microsoft Office E 13 KB El ReadReport_2013_11_25 08_06_26 25 11 2013 08 06 HTML Dokument 7 KE A ReadReport_2013_11 25 08 06_49 25 11 2013 08 06 HTML Dokument 7 KB B ReadReport_2013_11 25 08 10_36 25 11 2013 08 10 HTML Dokument 7 KB WriteReport_2013_11_25 08_08_57 25 11 2013 08 08 HTML Dokument 7 KB B WriteReport_2013_11_25 08_09_32 25 11 2013 08 09 HTML Dokument TKE E WriteReport_2013_11 25 08 10 12 25 11 2013 08 10 HTML Dokument 7 KB 34 XII 2013 3DIM Tool 2 3 1 Utilizing 3DIM Tool in Production Utilizing 3DIM Tool in Production General This chapter describes the best practice of using 3DIM Tool during luminaire produc tion General procedure Step Activity 1 Program ECG s 2 Integrate ECG s into the luminaire and perform all necessary c
Download Pdf Manuals
Related Search