Butterfly Tray Assembly & Installation Manual
Contents
1. 2012 Butterfly Concepts 80 M 260 FT OR SHORTER INSTALL 1 ACTUATOR WINCH PER SYSTEM AS SHOWN ACTUATOR WINCH LOCATION 81 M 261 FT OR LONGER INSTALL 2 ACTUATOR WINCHES PER SYSTEM AS SHOWN see ACTUATOR WINCH ACTUATOR WINCH LOCATION LOCATION BEND TABS INWARD AS SHOWN DO NOT BEND INTO OPENING INCLUDED SA LOCATE ACTUATOR WINCH AS SHOWN WITH COVER FINGER TIGHTEN FASTENERS 2 O 2012 Butterfly Concepts LA JE USE BUBBLE LEVEL TO ENSURE LEVEL ORIENTATION BEND LEGS AND INSERT SIDE B 2012 Butterfly Concepts BOTH ENDS BOTH ENDS SECURE WINCH TO FEED TUBE TO PRE CRANK WINCH TO SLIGHTLY TIGHTEN CABLE VENT MOVEMENT WINCH MUST BE LOOSE IN ORDER TO AUTO CENTER BETWEEN LEFT AND RIGHT SIDES INSERT BUTTERFLY TRAY CABLE INTO SLOT AND START BOLT GENTLY PUSH ACTUATOR ASSEMBLY TOWARD THE ACTUATOR WINCH WITH TRAYS IN A FULLY CLOSED POSITION fw TIGHTEN BOLT MAX TORQUE 1 kgf m 9 Ibf in USE NUT DRIVER DO NOT USE WRENCH ANNO STARTING AT THE ACTUATOR WINCH O 2012 Butterfly Concepts2. Q BUTTERFLY CONCEPTS LLC Butterfly Tray Assembly amp Installation Manual WARRANTY INFORMATION Butterfly Concepts LLC Butterfly Concepts warrants to the original purchaser of Butterfly Con cepts products Products that for one 1 year from the date of purchase the Products shall be free from defects in materials and workmanship The sole remedy available to Purchaser shall be the repair or replacement at Butterfly Concepts sole option of defective Products excluding labor All replacement and or repair parts shall be shipped ExWorks Middlebury Indiana U S A or Hsin chu Hsien 304 Taiwan This warranty excludes liability for defects in or damage to the Products both internal and external caused directly or indirectly by misuse which includes any use or ap plication not specified in Butterfly Concepts guidelines or recommendations neglect negligence alteration accident corrosive chemicals unsuitable feed acts of nature or failure to a follow in stallation instructions b operating instructions or c properly maintain the Products Replacement parts are only warranted for the remainder of the warranty period for the original part All replaced Products shall become Butterfly Concepts property Butterfly Concepts does not warrant nor deter mine warranty of any item that is manufactured by others such as feed tube feed auger motors gear boxes switches winches etc Such items are warranted separa
3. tely by the manufacturer if at all Butterfly Concepts makes no other representations or warranties of any kind except as expressly stated herein Butterfly Concepts disclaims any and all implied warranties including the warranty of merchantability and the warranty of suitability for a particular purpose To the fullest extent permitted by applicable law Butterfly Concepts shall not be liable to purchaser for any consequential inciden tal exemplary punitive special or indirect damages Butterfly Concepts shall not be liable for any damages that are based on negligence breach of warranty or strict liability Except as expressly provided herein Butterfly Concepts liability hereunder shall in no event exceed the purchase price of the defective products Some countries or regional entities do not allow exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you No person including any dealer distributor agent or representative of Butterfly Concepts is autho rized to make any representation or warranty concerning Butterfly Concepts products other than as contained herein Butterfly Concepts reserves the right to change models make changes to the Products and specifications at any time without notice or obligation O 2012 Butterfly Concepts TORQUE 0 6 kgf m 5 Ibf in MAX TORQUE TORQUE 0 6 kgf m 5 Ibf in 0 6 kgf m 5 Ibf in e a
Download Pdf Manuals
Related Search