User Manual
Contents
1. Version 1 0 July 2013 Teostouch S450E 1250E 1050E Copyright 2013 All Rights Reserved Manual Version 1 0 The information contained in this document is subject to change without notice We make no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated to another language without the prior written consent of the manufacturer TRADEMARK Intel Pentium and MMX are registered trademarks of Intel Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation Other trademarks mentioned herein are the property of their respective owners Safety IMPORTANT SAFETY INSTRUCTIONS 1 To disconnect the machine from the electrical Power Supply turn off the power switch and remove the power cord plug from the wall socket The wall socket must be easily accessible and in close proximity to the machine Read these instructions carefully Save these instructions for future reference Follow all warnings and instructions marked on the product Do not2. 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions A Battery Caution Risk of explosion if battery is replaced by an incorrectly type Dispose of used battery according to the local disposal instructions AaSafety Caution Note To comply with IEC60950 1 Clause 2 5 limited power sources L P S related legislation peripherals shall be 4 7 3 2 Materials for fire enclosure compliant 4 7 3 2 Materials for fire enclosures For MOVABLE EQUIPMENT having a total mass not exceeding 18kg the material of a FIRE ENCLOSURE in the thinnest significant wall thickness used shall be of V 1 CLASS MATERIAL or shall pass the test of Clause A 2 For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT the material of a FIRE ENCLOSURE in the thinnest significant wall thickness used shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A 1 LEGISLATION AND WEEE SYMBOL 2012 19 EU Waste Electrical and Electronic Equipment Directive on the treatment collection recycling and disposal of electric and electronic devices and their components The cr
3. O Reserved Note Please follow the Cash Drawer control signal design to control the Cash Drawer Cash Drawer Control Command Example Use Debug EXE program under DOS or Windows98 Command Panami O 48C 00 Allow to close gt Setthel O address 48Ch bit2 1 for opening Cash Drawer by DOUT bitO pin control gt Setthe I O address 48Ch bit2 O for allow close Cash Drawer Command feashorw gt Thel O address 48Ch bit6 1 mean the Cash Drawer is opened or not exist gt Thel O address 48Ch bit6 O mean the Cash Drawer is closed 12 4 4 Replace the Motherboard To access the motherboard you need to open the system box which is attached to the rear of the LCD Panel For 8 4 10 4 system 1 Open the system box Chapter 3 1 2 Disconnect all the connectors connecting on the motherboard as dotted line circle shows 3 Remove the screws x5 that fix the motherboard to the sheet metal bracket P Remove the HDD screw x1 to separate the HDD from the motherboard 5 Remove the hex screws x2 on the I O panel 13 For 12 1 system 1 Open the system box Chapter 3 1 2 Disconnect all the connectors connecting on the motherboard as dotted line circle shows 3 Unfasten the screws x5 that fix the Motherboard to the sheet metal bracket 4 Unfasten the hex screws x2 on the I O panel 14 4 5 Install Fingerprint iButton RFID Fingerprint iButton RFID are supposed to be as
4. of the RJ45 serial connector If you use the serial RJ45 to DBY adapter cable the power is on pin 9 of the DB9 connector By default the power option is disabled in the BIOS 1 Power on the system and press the lt DEL gt key when the system is booting up to enter the BIOS Setup utility 2 Select the Advanced tab 3 Select VGA COM Power and LCD Brightness Configuration Ports and press lt Enter gt to go to display gt UGA COM Power and LCD Brightness Configuration the available options 4 To enable the power select COM2 COM3 or COM4 Power setting and press lt Enter gt Select UGA Power Power and press lt Enter gt Save the change by pressing F10 21 LCD ID ac oa ez Output Resolution Interface 1 2 3 4 5 6 7 8 9 10 LVDS 800 x 600 Single Panel 22 To download the most recent drivers and utilities and obtain advice regarding the installation of your equipment please visit the AURES Technical Support Website www aures support fr French www aures support fr UK English www aures support fr GE German 23
5. 85 RH non condensing I U 3 2 S o lt Communication Wireless LAN mini PCI e wireless LAN card 802 11 b g n Teostouch 8450E 230 x 50 x 188mm Dimension WxDxH Teostouch 1050E 279 x 50 x 227mm Teostouch 1250E 323 x 55 x 262mm Teostouch 8450E 1 34kgs 1 7kgs Teostouch 1050 1 7kgs 2 1kgs Teostouch 1250E 2 5kgs 2 9kgs aaa nn NE Windows XP POS Ready 2009 XP Embedded XP professional for Embedded OS Support Linux limited support Windows 7 32bit POSReady 7 32bit Note 64 bit OS not supported Windows 8 not supported The specification is subject to change without prior notice 17 6 1 C56 Motherboard Layout LI L poo000 CNG ooooo MINI_PCIE 0H CN10 un JP6 DOT ll ge DDR3_A1 JPY IPA ca ea 18 6 2 Connectors amp Functions Connectors Funetions COM3 COM4 Power Setting Touch Connector CASH DRAWER Power Setting 19 6 3 Jumper Setting Cash Drawer Power Setting Inverter Selection COM2 Power Setting A No Power COM2 5V COM2 12V OPEN H SHORT A Manufacturer Default Setting 20 COM 3 amp COM4 Power Setting A COMS 5V COM3 12V COM4 5V A COMA 12V COM2 COM3 COMA Power Setting COM2 COM3 and COMA can be set to provide power to your serial device The voltage can be set to 5V or 12V by setting jumper JP5 and JP6 on the motherboard When enabled the power is available on pin 10
6. emove the thumb screw x1 on the rear side of the stand and slide the HDD outward 12 1 Disconnect the SATA cable and remove the screws x2 and slide the HDD right front 4 1 Install a WLAN External antenna WLAN card WLAN Card Module Accessory 1 External antennax1 2 WLAN card x 1 2 3 Screw x 1 4 WLAN cable x 1 4 1 Open the system box first Chapter 3 1 2 Connect the WLAN cable to the Main Connector on the WLAN card 3 Slide the WLAN card i we pH er nto the WLAN card slot 4 Press down the WLAN and fasten the screw x1 to fix the WLAN card to the Motherboard 5 Open the blind hole on the system box 6 Align and thread the other end of antenna cable through the blind hole Antenna cable with self tapping screw head Check nut Washer ails O0 7 Assembly the antenna cable and rotate the washer to fix the antenna cable to the system box 8 Screw the antenna into the screw 4 2 Install a pSSD Card v Screwsx2 pSSD card pSSD metal bracket pSSD Card Module Accessory 1 pSSD card x 1 2 Screws x 2 3 Metal bracket x 1 1 Open the system box first Chapter 3 1 2 Assemble the metal bracket and a pSSD card by fastening the screws x2 3 Remove the screw x1 fixing on the motherboard mu MA aii e nae er a 4 5 ee A i he lt p 5 2 e HAN er I i didu l t ig 7 J 2 m uo
7. nnnnnnnnnnnnnnnnnnnnnnnn nennen 11 4 4 Replace the Motherboard aaaaaan nakana kaaa aaa aaa aaa aaa 13 4 5 Install Fingerprint iButton RFID aan aa vana aa aaa ananao 15 5 Specification aaa aaa ana ana ana ana ana aaa ana na ana anna 16 6 Configuration eena ana ana ana anna naa na aan nana anaana 18 6 1 C56 Motherboard LayOut aeaaaaaaa aaa a nana aaa aaa 18 6 2 Connectors amp FUnctONS aaa akan aaa aan aaa 19 63 Jumper Sellin e a onak 20 Appendix Driver Installation uuuuuuunu 23 Vi 1 1 Standard items e Manual CD 1 2 Optional items WLAN CARD a WLAN card b pSSD card 2 System View Front View Rear View 3 Side View Top View 5 oj Rear I O View Jas A moon COMI COM2 COM3 COM4 O OSG 50 N Deere e pee oo Power button MIC in only for 10 4 and 12 1 19 Line out only for 10 4 and 12 1 3 System Assembly amp Disassembly 3 1 Open the System Box To access the Motherboard HDD or install the WLAN and pSSD card you need to open the system box first which is located in the rear cover of the LCD panel The procedure of opening the system box as below 1 Unfasten the screws x4 2 Gently flip up the LCD panel with touch module due to various connectors connecting to the motherboard 3 2 Replace the HDD For 8 4 10 4 System 1 Open the system box Chapter 3 1 2 8 4 10 4 R
8. ossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life Instead the device should be taken to the waste collection centers for activation of the treatment collection recycling and disposal procedure To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Revision History Version Date Description Table of Contents 1 Package ChecklisSt om ana ana nana anna ana na ana nnanaa 1 EL Standard lets lei 1 1 2 OBRLONaL EMS nein 2 2 System VIewW aaa ana ana naa na ana ana naa na ana ana nn anaananna 3 3 System Assembly amp Disassembly 000 5 3 L OPEM TAS System BR Jun nee 5 32 Replace We HDD see en 6 4 Peripherals Installation aaa ana an ana a nana anana 7 21 INStalla WLAN ene ei T 42 nstalla DSO CANO sea 9 4 3 Install a Cash Drawer euessuseensnnnnnn
9. s r A En rl e n ree BE ur k H 7 ae y E 1 bal i 1 a sig i Slide the pSSD card module into the pSSD HDD slot as the position and location as above left picture shows Screw back the screw x1 to fix the pSSD module to the motherboard 10 4 3 Install a Cash Drawer You can install a cash drawer through the cash drawer port Please verify the pin assignment before installation Cash Drawer Pin Assignment in Siem a oww 2 omo 12V 19V IH NO Cash Drawer Controller Register The Cash Drawer Controller use one 1 0 addresses to control the Cash Drawer Register Location 48Ch Attribute Read Write Size Sbit BIT BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BITO Attribute Reserved Read Reserved Write Reserved 765432710 x x xx LI Ld Reserved Cash Drawer DOUT bitO pin output control Cash Drawer DOUT bit pin output control Reserved Cash Drawer DIN bitO pin input status Reserved 11 Bit Reserved Bit 6 Cash Drawer DIN bitO pin input status 1 the Cash Drawer closed or no Cash Drawer O the Cash Drawer opened Bit 5 Reserved Bit 4 Reserved Bit 3 Cash Drawer DOUT bit1 pin output control 1 Opening the Cash Drawer 0 Allow close the Cash Drawer Bit 2 Cash Drawer DOUT bitO pin output control 1 Opening the Cash Drawer 0 Allow close the Cash Drawer Bit 1 Reserved Bit
10. sembled at the same place of the system 1 The modules can be fixed to the system by fastening screws x2 on the back Specification Teostouch 8450E 1050E 1250E Intel CedarView D2550 processor 1 86GHz 1MB Cache Motherboard CPU Supports Chipset Intel NM1O System Memory 1 x DDR3 SO DIMM socket up to 4G FSB 1067 MHz Graphic Memory Intel GMA 3650 Gfx frequency up to 640MHz DX9 LCD Panel LCD Size Teostouch 8450E 8 4 Teostouch 1050E 10 4 Teostouch 1250E 12 1 Maximal Resolution Teostouch 8450E 1050E 800 x 600 Teostouch 1250E 1024 x 768 Storage I DD 1 x slim HDD bay SATA Flash Memory SATA SSD Flash memory card 8G 16G 32G 64G option Rearl O USB 4 x RJ45 Serial COM COM1 standard RS232 COM2 3 4 powered RS232 COM2 default OV COM3 default 5V COMA default 12V by BIOS setting 2nd VGA 1 DB 15 Female 1 12V 24V cash drawer Teostouch 8450E 1050E NA Teostouch 1250E 1 Teostouch 8450E NA Teostouch 1050E 1250E 1 Mic in JER gt U x 9 eb OD a O 4 DC Jack U O OD sS o r O Speaker 2 x 2W speaker O Teostouch 8450E 1050E 1250E Motherboard Peripheral MSR Standard integrated 3 Track MSR USB Power Supply External 65W DC adapter 19V 3 4A EMC amp Safety FCC CE Class A LVD Operating Temperature 0 C 35 C 32 F 95 F Storage Temperature 20 C 60 C 4 F 140 F 20
11. use this product near water Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register or in a built in installation unless proper ventilation is provided 7 This product should be operated from the type of power indicated on the marking label If you are not sure of the type of power available consult your dealer or local power company 8 Donotallow anything to rest on the power cord Do not locate this product where persons will walk on the cord 9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product CE MARK This device complies with the requirements of the EEC directive 2004 108 EC with regard to Electromagnetic compatibility and 2006 95 EC Low Voltage Directive Fe FCC This device complies with part 15 of the FCC rules Operation is subject to the a N Oo following two conditions
Download Pdf Manuals
Related Search