Home

DS-9500NI-S Series NVR USER MANUAL Version 1.2.0

Contents

1. IIA HDD Group attribute HDD Group DI Read Hrite Read Write Read only t D HDD Group attribute HDD Group record channel Click HDD Group attribute button to enter setup page First select a HDD group and then tick channels you want to record in this HDD group and then click OK to finish Note Recording the images of one channel in one HDD group is recommended 57 HDD Group record channel HDD Array No JV Select All top Group DI y Mins Emo ui Mpiz mns Mia CHAPTER 10 Appendix Glossary DHCP Dynamic Host Configuration Protocol DHCP is a network application protocol used by devices DHCP clients to obtain configuration information for operation in an Internet Protocol network NTP Acronym for Network Time Protocol A protocol designed to synchronize the clocks of computers over a network PPPoE PPPoE Point to Point Protocol over Ethernet is a network protocol for encapsulating Point to Point Protocol PPP frames inside Ethernet frames It is used mainly with ADSL services where individual users connect to the ADSL transceiver modem over Ethernet and in plain Metro Ethernet networks DDNS Dynamic DNS is a method protocol or network service that provides the capability for a networked device such as a router or computer system using the Internet Protocol Suite to
2. 51 IV Enable NIP Server Address Select BU Network Parameters gt FP HIF Settings Tick v to enable NTP function NIP Port 123 Note Time Synchronization Interval 0 10080 min default edo uu 60min Select Time Zone If the device connected to the public network the IP address se ol f NTP server provided by carrier can be input in the blank a Server Address am E Hour s P Minute s I Adjust If the device connected to private network the IP address of NTP server built by NTP software can be input the blank Server Address 9 5 5 Net Disk Settings By Net Disk Settings recorded data can be saved to the network storage disk provided by NAS or IP SAN server Select Wetwork Farameters gt F HFS Settings Disk No Server IP Address File Path Type Input the IP address of NAS or IP SAN server in the blank o 0 0 of ms u Server IP address input the saving path allocated by NAS 2 D fo ls y or IP SAN server in the blank File Path 3 fo o 0 0f ls y Note 4 0 0 0 0 fF W y 1 Make sure that the device supports NFS function and 5 0 0 0 0 us E NAS or IP SAN server allocated the storage space O O Ee CON correctly E i 2 Upto 1 IP SAN server is allowable to be used M o o 0 0 HAS 9 5 6 E Mail Settings Through E mail configuration the e mail can be sent to the designated mailbox when there is an alarm User name Password Select Hetwo
3. IN NO EVENT WILL HIKVISION ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION AND THE LIKE ARISING OUT OF THE USE OR INABILITY TO USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU Preventive and Cautionary Tips Before connecting and operating your NVR please be advised of the following tips e Ensure unit is installed in a well ventilated dust free environment e Unit is designed for indoor use only e Keep all liquids away from the NVR e Ensure environmental conditions meet factory specifications e Ensure unit is properly secured to a rack or shelf Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit e Use the NVR in conjunction with an UPS if possible e Power down the unit before connecting and disconnecting accessories and peripherals e A factory recommended HDD should be used for this device TABLE OF CONTENTS CHAPPER Libia 5 O PARRA RO CO I Om dart RAT 5 1 1 Eront Panel Br dicton a a IRRE a 6 1 2 Starting and Shutting Down Your NVR ussssssnnssssssssseseeeeneennnn
4. 9 3 1 Video Parameters Remote setting El ina Device Parameters F Device Information F Version Information I rauen Farameters Channel Ho IF camera 1 i ie Display Settings F Video Farameters a Schedule Record F Motion Detection r Video Lost Encoding Parameters Main Stream Normal F Video Tampering Zn F Video Mask Stream Type video El fa Hetwork Parameters p ak Resolution 40x80 JP PPPOE Settings BP DDS Settings Bitrate Type Constant F HIF Settings F Het Disk Settings Bitrate 20481pbs xl F E mail Settings H E Serial Port Settings Frame Rate Full Frame H E Alarm Parameters ei Exception Parameters Video Quality Hi et Account Management Frame Type Single P Frame I Frame Interval 25 Figure 9 6 Settings for recording Main Stream Normal Event and Sub stream Parameters Stream Type Video and Video amp Audio Recording Resolution Bit rate Type Variable and Constant Frame Type BBP BP and Single P 9 3 2 Schedule Recording Step1 Enable Schedule Recording Note When NVR is succeed to connect to IP camera it will start schedule recording which means recording for 7 24 39 Remote setting El Device Parameters mP Device Information i SP Version Information i u en nn Channel Ho 1 camera 1 e Enable Recording p Video Lost 01i 235 45 6 T 8 9 10111215 14151617 150192021 222324 i i F Y deo Tampering Tt 1 eo 35 e
5. the selection the status will become click again to stop System Folder saving Homegroup Q System Folder A Yue File name Save as type All File mp4 BE 29 After searching file click to pop up a new page where list all the files for the specific day Download Select one file and click to start download click again to stop download During download the window will display the file number and download progress 7 4 Remote Backup DS 9500NI S series NVR support local one key backup function and it can also support backup to USB storage devices remotely After searching files click lee to pop up a new page where list all the files for the specific day Select the backup device enable backup player or not select the files and clic it stop backup to start backup click again to During backup the window will display the file number and backup progress T Recording Files Download Windows Internet Explorer rer Start time 2010 06 03 00 00 02 2010 06 03 00 04 59 2010 06 03 00 21 50 2010 06 03 00 38 40 2010 06 03 00 55 32 2010 06 03 01 12 24 2010 06 03 01 29 17 2010 06 03 01 46 07 2010 06 03 02 03 01 2010 06 03 02 19 53 2010 06 03 02 36 45 2010 06 03 02 53 37 2010 06 03 03 10 31 2010 06 03 03 27 22 2010 06 03 03 44 14 2010 06 03 04 01 05 2010 06 03 04 17 57 2010 06
6. 03 04 34 48 Stop time 2010 06 03 00 04 59 2010 06 03 00 21 50 2010 06 03 00 38 40 2010 06 03 00 55 32 2010 06 03 01 12 24 2010 06 03 01 29 17 2010 06 03 01 46 07 2010 06 03 02 03 01 2010 06 03 02 19 53 2010 06 03 02 36 45 2010 06 03 02 53 37 2010 06 03 03 10 31 2010 06 03 03 27 22 2010 06 03 03 44 14 2010 06 03 04 01 05 2010 06 03 04 17 57 2010 06 03 04 34 48 2010 06 03 04 51 38 Im Internet Protected Mode Off ee USB 1 1 v File Index O Ny omne wN Start time 2010 06 03 00 00 02 2010 06 03 00 04 59 2010 06 03 00 21 50 2010 06 03 00 38 40 2010 06 03 00 55 32 2010 06 03 01 12 24 2010 06 03 01 29 17 2010 06 03 01 46 07 2010 06 03 02 03 01 2010 06 03 02 19 53 2010 06 03 02 36 45 2010 06 03 02 53 37 2010 06 03 03 10 31 2010 06 03 03 27 22 2010 06 03 03 44 14 2010 06 03 04 01 05 2010 06 03 04 17 57 2010 06 03 04 34 48 Stop time 2010 06 03 00 04 59 2010 06 03 00 21 50 2010 06 03 00 38 40 2010 06 03 00 55 32 2010 06 03 01 12 24 2010 06 03 01 29 17 2010 06 03 01 46 07 2010 06 03 02 03 01 2010 06 03 02 19 53 2010 06 03 02 36 45 2010 06 03 02 53 37 2010 06 03 03 10 31 2010 06 03 03 27 22 2010 06 03 03 44 14 2010 06 03 04 01 05 2010 06 03 04 17 57 2010 06 03 04 34 48 2010 06 03 04 51 38 O Backup players BackUp File size im Internet Protected Mode Off Note If USB
7. 119 172 8 40 161 172 8 40 162 Online Statues Delete Online Online Online Online Online Online Online Online Online Online Online Online Online Online Online Online IP Camera No Password Channel No Modify Reset di hh gt A A hb A RA A ee L dai L Ada 5 31 9 3 Recording Settings Click Remote Config and select Kl NEIEUPEIENBEIE to enter remote settings menu where you can configure recording alarm network settings and etc Remote setting i B 5 i Device Information J Version Information O Eil Channel Parameters Device Mame Embedded Het IVE Ber Display Settings l i ia dea Paine ae Device Ho 255 i er P Schedule Record De Mation Detection i we F Video Lost Main BHC scale Disable A ar e Video Tampering 0 Video Mask spot BHC scale Disable El Sj Network Parameters Device Type DS95XX_H_S iu P Network Settings i E es F PPPOE Settings Channel Number lo re La jr DDNS Settings HOD Humber PP HIF Settings a 47 Net Disk Settings Alarm Input Humber 4 u P E mail Settings E fa Serial Port Settings Alarm Output Humber 1 Sy Alarm Parameters i Device Serial Ho D3_9504N_51620100527BARR4006191T2WCYU Bee Exception Parameters n Account Management eSATA For Export H E MIDI Settings Update Remotely W Automatic IF camera connection Se Record Replace Yes noi Lo e Figure 9 5 38
8. 256 512 ort RTSP an support 640 480 320 240 176 114 768 1024 1536 ne el MJPEG not AMR frame rate 1 2 3 4 5 6 8 10 2048 3072 4096 NOESHBBOR Oe Suppor support not support 12 15 20 25 self defined 32 8192 kbps D1 2CIF CIF QCIF 640 480 12 ES 1 V6201 eee al ee 6 8 10 12 ER Sor 20 i SI MSerie 1 02 110 2009 RTSP i G711U Law 15 20 30N 25P er 12 1M 2M 3M 4M AAA alarm inputs 0903 support RNG M 6M 7M 8M Ne s MJEPG Note the resolution actually set motion detection Alarm Out not not support supported is zone support 640 480 1280 720 1280 960 VBR support 256 MPEG4 D1 2CIF CIF QCIF 640 480 12 512 1M 2M 3M Normal support 80 720 1280 960 4M 5M 6M 7M IP 1 03 71 20091 RTSP G711U Law frame rate 1 2 4 6 8 10 12 8M kbps ot A Camera 229 MJEPG not support 15 20 30N 25P CBR support 256 cadi AlarmOut not Series support Note the resolution actually 512 1M 2M 3M a support Allow NVR to receive Alarm IN 2 motion detection alarm a alarm inputs PAL format supported is D1 2CIF CIF QCIF 4M 5M 6M 7M 8M kbps 64
9. Fa ra Fara Fara Fara JV All Day Recording Motion Detection Schedule Recording F Schedule Recording y Schedule Recording A Schedule Recording Y Schedule Recording y Schedule Recording Y Copy to hole Week y 9 3 4 Alarm Recording Select ha Alarm Parameters gt Alarm Input Settings Step1 Select alarm input Note It refers to the alarm input of IP channel Step2 Select the type of alarm input NO or NC Note NO is the default status The settings will become effective after rebooting If you are using IP camera that is not from Hikvision please setup this function by using its own software Step3 Enable Alarm Handle to activate Arm Schedule amp Linkage Method 43 Settings Settings Cop ion Settings Settings Copy to Settings Settings Copy to Step4 Set the fortify time for alarm input Click Settings in Fortify Time menu Select Weekday as some day of the week or the whole week for recording time The All Day Record or 8 Segments can be selected as well Note The time of each segment can not be overlapped Step5 Set recording channel triggered by alarm Click Settings in Linkage menu and select Trigger Recording tab Enable the recording channels you want Step6 Enter Ed schedule recording interface Click to enable Reco
10. Figure 2 1 1 Step 2 Name the connection and define the icon Input a name e g HK select an icon and press OK to enter Connect To dialogue box Step 3 Select the communication port Select COMI in Connect To inter face Please select the COM port according to the reality in case PC has more than 1 COM Press OK to enter Properties dialogue box 11 Connect To Enter details for the phone number that you want to dial County region hina 06 Area code Connect using v Figure 2 1 2 Step 4 Serial port setup Set port parameters in COMI Properties dialogue box as follow Fig 2 1 3 COM1 Properties Port Settings Bits per second Data bits Parity Stop bits Flow control Restore Default Apple Figure 2 1 3 The parameters should be Bits per second 115200 Data bits 8 Parity None Stop bits 1 Flow control None Press Apply and OK after the setup Press Enter under Hyper Terminal interface When root dvrdvs appears the connection is established 12 amp HK Hyper Terminal File Edit View Call Transfer Help Figure 2 1 4 Step5 Disconnect and save connection According to the tips disconnect and save HK for the next time After saving there will be a new Hyper Terminal item established in the program group Start gt Accessories gt Communications gt Hyper Te
11. Remote alert or control the relay output of the NVR Alarm and exception settings must be configured properly to upload to host Remote Video Output Control Send remote button control signal Remote Serial Port Control Configure settings for RS232 and RS485 ports Remote Camera Management Remotely enable and disable analog channels Add and delete IP cameras Remote Shutdown Reboot Remotely shutdown or reboot the NVR 9 8 Remote Upgrade Remote Upgrade bin Click fea Update Remotely Click Browse to search the local upgrade file click Process Upgrade to start upgrade remotely 53 9 9 HDD Settings HDD Formatting Click HDD Format Note Please backup the data before formatting hard disk Disk Group Management Select one disk and select one HDD Group you want it to be shown as figure right Note NVR supports up to 16 HDD Groups HDD Property Settings Select one disk and configure its property by selecting Read Write Read Only or redundant from drop down menu shown as figure right Note Read Write Writing in or Read from this disk is allowed when selecting this option Write Only Unable to write in this disk to protect existed recordings from being overwritten when selecting this option Redundant Redundant recording in this disk is allowed when selecting this option 56 ee HDD Group attribute Read Write
12. channels are being triggered for motion detection See Motion Detection e Why doesn t the NVR detect my USB export device for exporting recorded files There s a chance that the NVR and your USB device is not compatible Please refer to our company s website to view a list of compatible devices 60 List of Compatible IP Cameras List of Hikvision IP Cameras Supported by DS 9500NI S NVR Main Stream Sub IPC Resolution IPC Sub Stream Audio Encoding Lai Format Transmission Version Packaging Format Sub Resolution Supported by Stream Resolution Compr Stream 9500NVR Resolution Supported ession by 9500NVR DS 2CD802P DS 2CD802N DS 2CD812P 4CIF DCI a DS 2CD812N Support F 2C1F a CIF QCIF CIF QCIF DS 2CD892P CIF QCIF DS 2CD892N DS 2CD832 UXGA S UxGA 1600 12 6446 0P 720p V De Platfo DS 2CD852 GA OOO 12 Sips 720 Support P VGA 4CIF DC CIF QCIF CIF QCIF enn MF E 4CIF DCI IF 2CIF Panel CIF QCIF F QCIF HD IP Camera HIK H 264 HIK V2 0 build RTSP PS 090811 Standard H 264 V2 0 build Standard RTSP RTP 090522 Standard MPEG4 V2 0 build Standard RTSP RTP 090715 HIK H 264 HIK V2 0 build RTSP PS 090316 Standard H 264 V2 0 build Standard RTSP RTP 090608 Standard MPEG4 V2 0 build Standard RTSP RTP 090629 HIK H 264 HIK V2 0 build RTSP PS 090316 Standard H 264 V2 0 build Standard RTSP RTP 090608 Standard MPEG4 V2 0 build Standard RTSP RTP 090629 Standard H 264 V2 0 build Standard RTSP RTP 10042
13. host port address of alarm host and IP server NTU DNS1 DNS2 Preferred and spare DNS server IP sever IP address of IP server Alarm signal can be uploaded to the IP address automatically 50 9 5 2 PPPoE Settings Select mi Network Farameters gt PPPOE Settings Enable PPPoE by ticking M input the user name and password then save the changes and reboot the device to make the parameters become effective If succeed to dial the current IP address will be displayed in the blank DDNS IP 9 5 3 DDNS Settings Adopting DDNS function can solve the problems caused by dynamic IP Click E Hetwork Parameters gt DONS Settings Enable DDNS If the IP Server IP is selected as protocol then input the address where the IP server is running If the Dyndns is selected as protocol Server Name Input the IP address of the server such as members dyndns org Domain the domain name that user applied for the device such as test dynlia com User name password and verify the account information that user registered on the Dyndns website If the Peanut Hull is selected as protocol Input the user name and password applied on the Peanut Hull website to visit the device by the applied domain name 9 5 4 NTP Settings Adopting NTP function can enable client software to synchronize the time and data of the device regularly
14. notify a domain name server to change in real time ad hoc the active DNS configuration of its configured hostnames addresses or other information stored in DNS MTU Maximum Transmission Unit Unit is represented by bytes MTU of most network devices is 1500 If it s bigger than gateway MTU the data packets will be split into smaller ones for transmission In this case there will be pieces of data packet causing packet loss ratio to raise and slow down network speed When MTU is preset smaller than the gateway MTU the packet loss ratio will decrease NVR Acronym for Network Video Recorder An NVR can be a PC based or embedded system used for centralized management and storage for IP cameras IP Domes and other DVRs 59 FAQ e Why does my NVR make a beeping sound after booting There are a few reasons for the warning beep your NVR makes after booting 1 There is no HDD present in the NVR 2 The HDD has not been initialized 3 The HDD is defective If you wish to use your NVR without any HDDs you may disable this warning beep in the Exception Settings menu See Exceptions e Why is there no video recorded after setting the motion detection If there are no recorded video after setting the motion detection please check 1 Check that the recording schedule is setup correctly by following the steps listed in Schedule Recording 2 Check that the motion detection area is configured correctly See Motion Detection 3 Make sure that
15. 1280 7 20 800 600 640 480 320 240 frame rate 1 2 3 4 5 6 8 10 12 15 20 25 Note the resolution actually supported is 640 480 320 240 2048 1536 1920 1080 1600 12 00 1280 1024 1280 960 1280 720 800 600 64 0 480 320 240 frame rate 1 2 3 4 5 6 8 10 12 15 20 25 63 VBR support 56 128 256 384 512 750 1024 1 2M 1 5M 2M 2 5M 3Mkbps CBR support 56 128 256 384 512 750 1024 1 2M 1 5M 2M 2 5M 3Mkbps Not support Not support Allow NVR to receive motion detection alarm information but not to set motion detection zone Allow NVR to receive motion detection alarm information but not to set motion detection zone Allow NVR to receive motion detection alarm information but not to set motion detection zone AlarmIN 1 alarm input AlarmOut not support AlarmIn support undetermined alarm inputs AlarmOut suppo rt undetermined alarm outputs AlarmIn support undetermined alarm inputs AlarmOut suppo rt undetermined alarm outputs AlarmIn Allow NVR to receive support motion detection alarm undetermined Not support information but not to alarm inputs set motion detection AlarmOut suppo zone rt undetermined alarm outputs MPEG4 supp ort private protocol ACIF CIF Spectra gt de ed not support frame rate settings Mini IP UDP MJPG not support CBR support 40 MPEGA supp 1600 1200 1280 960 800 600 50 128
16. 3 DS 2CD862 XVGA 72 7 u SD IP DS 2CD7133 QVGAICI Camera F E Support VGA QVGA CIF F 365 Platfo un 1600x900 1280x960 1600x900 1280x IUXGA 72 960 HD IP DSC07133 Support 0P 800x60 UXGA 720P 80 QVGA CIF QUe Camera E CIF 0 0x600 INGA ACI VGA ACIE CIF F CIF DS 2CD876 UXGA 1600 12 400x300 dn ea 6467 uni Platfo Camera 5M 2560 l 1920 5M 2560 1920 DS Support 2048x1536 2048x1536 1080 VGA VGA 1080P P 720P 720P Standard H 264 V2 0 build Standard RTSP RTP 100423 Standard H 264 V2 0 build Standard RTSP RTP 100529 rm Standard H 264 V2 0 build Standard RTSP RTP 100529 61 List of Third party IP Cameras Supported by DS 9500NI S NVR IPC Mode Video Compressi on Audio 2 Alarm In Out Compression Supported BitRate Firmware Version Manufa Supported Resolution cturer Motion Detection 1 00Ex x stands for numeric MAIN Ver 1 04 90 SUB Ver 1 00 03 CAM MAIN Ver 1 00 08 CAM SUB Ver 1 00 00 NET MAIN ver 1 00 04 NET SUB Ver 1 00 01 MAIN Ver 1 01 01 1 00312 03 SUB Ver 1 00 02 1 00224 00 MPEG4 supp ort private protocol UDP JEPG not support MPEG4 supp ort private MJEPG not support H264 suppos e RTSP MJPEG not support H264 not support RTSP MJPEG not support H264 suppos e RTSP MJPEG not support G726A Law sup G711U Law sup G726 support A AC not support G711A Law Unt ested Not support
17. 5 Exceptions Exception parameters are for the alarm handle of abnormal event which is including HDD Full HDD Fault HDD errors or HDD not initialization Network Broken IP Address Conflict Illegal Access user name or password wrong Video Output Standard Mismatch and Video Signal Exception video signal unstable 49 Exception Type op Full y Alarm Handle Method Select the exception type and handle method Select ma Exception Farameters interface to enter configuration Audio Warning TT Email Linkage TT Upload to Center Trigger Alarm Output Analog Alarm Output IP camera Alarm Output Select ALL 9 5 Network Configuration 9 5 1 Basic Configuration NIC Type 10n 1001 10001 Aut Device IP Address 172 8 40 18 J Obtain Auto Device Port je000 Subnet Mask 255 255 255 0 Default Gateway 172 8 40 1 Select Network Parameters gt F Network Settings Configure the network according to the actual situation If there is DHCP server in the network enable Obtain Auto and reboot the device to get the IP address under this network a ei E segment automatically Multicast 0 0 0 0 HITP Port feo Advance Advanced Network Settings DNS Server Addressi DNS Server Address2 Select Advance to enter advanced configuration You can Alarm host IP configure preferred DNS serverl and spare DNS server2 IP Alarm
18. 56 384 512 768 1M 1 5M 2M 3M 4M 5M kbps VBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M kbps CBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M kbps VBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M kbps CBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M kbps Allow NVR to receive motion detection alarm information but not to set motion detection zone Allow NVR to receive motion detection alarm information but not to set motion detection zone Allow NVR to receive motion detection alarm information but not to set motion detection zone Alarm IN 1 alarm input Alarm Out not support Alarm IN 2 alarm inputs Alarm Out not support AlarmIN 2 alarm inputs AlarmOutl alarm output DN Acti ACM 7411 ARE A V5105 V3 11 13 H264 not support Not support 2592 1944 1296 972 ES 1 2 3 4 5 6 7 8 VBR support 4096 3072 2048 1536 1024 768 512 384 256 128 64 kbps MPEG4 supp ort RTSP MJEPG not support PCM support Sarix Sarix IXSOC IX30C MPEG4 supp ort RTSP H 264 suppor t not Support adopted MJPG not support H 264 suppor t RTSP MJPG not support Not support 160 112 320 240 640 480 1280 720 1280 1024 support 1 2 3 4 5 6 7 10 15 30 2048 1536 1920 1080 1600 12 00 1280 1024 1280 960
19. 640 480 320 240 not support frame rate settings 640 480 480 360 384 288 frame rate 25 20 15 10 8 6 D545 224 1280 720 960 540 640 360 320 180 not support frame rate settings 1280 720 640 360 320 180 not support frame rate settings 1920 1080 1280 720 640 360 3 20 180 not support frame rate settings CBR support 64 128 256 512 1024 1536 2048 3072 4096kbps VBR support 2048 1536 1024 768 512 384 256 CBR support 64 128 256 512 1024 1536 2048 3072 self defined 32 8192 kbps Not support Allow NVR to receive motion detection alarm information but not to set motion detection Allow NVR to receive motion detection alarm detection zones Allow NVR to receive motion detection alarm information but not to set motion detection zone Support 4 motion detection zones Allow NVR to receive motion detection alarm information but not to set motion detection zone AlarmIn 1 alarm input AlarmOut no t support AlarmIn 1 alarm protocol port 320 240 256 192 160 120 128 64 kbps input 1408 UDP G726 not frame rate 25 20 15 10 8 6 CBR support no a AlarmOut JEPG not support 5 4 3 2 1 2048 1536 1024 2 alarm outputs support 768 512 384 256 en 128 64 kbps 640 480 1280x1024 1280x720 1 VBR support 64 128 256 512 1024 Sinai 1536 2048 3072 MPEGA4 supp G711U Law sup 1280x480 480x360 self defined 32
20. 8192 Allow NVR to receive Alain sian ort port 480x270 352x288 kbps motion detection alarm input 4 4 G726 support 320x240 i information but not to i W NUBE Cot AAC not 320x180 240x180 240x135 CER support 04 set motion detection Akarmi support 128 256 512 1024 1 alarm output support 176x144 160x120 160x90 zone 1536 2048 3072 frame rate 25 20 15 10 8 6 i 5 4 3 2 1 self defined 32 8192 7 kbps VBR support 64 128 256 512 1024 1536 2048 3072 H 264 suppor G711U Law sup 1920x1080 1280x720 800x450 4 self defined 32 8192 5 02 t port 80x270 320x180 kbps Support 4 motion AlarmOut 2 alarm outputs AlarmIn 2 alarm inputs AlarmOut 1 alarm output AlarmIn 2 alarm inputs AlarmOut 2 alarm outputs AlarmIn 2 alarm inputs AlarmOut 2 alarm outputs Bosch ss mie n 62 495 NBC25 18500400 18500400 NWCO H 264 BP support RTSP single stream H 264MP not support MJPEG not support H 264 suppor t RTSP dual stream H 263 not No audio support MJPEG not support G711 support 640 480 320 240 704 576 704 288 352 288 176 144 not support frame rate settings Note the resolution actually supported is 640 480 320 240 640 480 320 240 704 576 704 288 352 288 176 144 not support frame rate settings Note the resolution actually supported is 704 576 704 288 352 288 176 144 VBR not support CBR sup
21. MIK VISION DS 9500NI S Series NVR USER MANUAL Version 1 2 0 Hikvision Network Digital Video Recorder User s Manual This manual as well as the software described in it s furnished under license and may be used or copied only in accordance with the terms of such license The content of this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by Hikvision Digital Technology Co Ltd Hikvision Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book Except as permitted by such license no part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical recording or otherwise without the prior written permission of Hikvision HIKVISION MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THE HIKVISION SOFTWARE HIKVISION DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS ACCURACY RELIABILITY CURRENTNESS OR OTHERWISE THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES THE ABOVE EXCLUSION MAY NOT APPLY TO YOU
22. USB mouse and USB Hard Disk Drive HDD 3 PowerBution Powers NVR on off EN Backup Button Backup video files 5 Channel Status Indicators Blue indicates recording red indicates network connection purple indicates recording amp network connection De Turning red indicates power supply but without system running turning blue indicates power supply and system running 1 DS 9516NI S Front Panel Turning red indicates power supply but without system running turning blue indicates power supply and system running EE Backup video files 3 USB Ports Universal Serial Bus USB ports for additional devices such as USB mouse and USB Hard Disk Drive HDD 5 Channel Status Blue indicates recording red indicates network connection purple indicates Indicators recording amp network connection 1 2 Starting and Shutting Down Your NVR Power On If the power LED indicator on the front panel is off please plug the power supply into an electrical outlet the LED should turn red indicating the unit is receiving power When the LED is red please press the Power button on the front panel The Power indicator will turn blue The unit will begin to start Note DS 9500NI S series NVR do not have local output when Ready indicator turns blue that means the unit is power on and ready to be configured Power Off Standard Shutdown Press and hold the POWER button for 3 seconds the device will enter power off process when power
23. a It can support 1 4 9 and 16 windows division The change between different windows division modes will not stop the current preview the window still can be operated 20 5 1 2 Preview Preview by channel After choosing window division mode select one re Thu 14 17 24 window and click lal on channel list to preview the current channel If preview successful the icon will become Preview by page Click the device node on the list then multiple channels will start to display eo a according to the selected window divisions Clic to switch to the next page click fel to the previous page Or just click and to start preview by page Double click to maximize 06 03 2010 Thu nl 06 03 2010 Thu 14 20 86 Click the selected window can maximize the window La o to full screen double click again to resume ESTI ES ssaa IPCanera 13 Full screen display 0f 03 2010 Tha 14 28 07 EA Click amp to change the multi channel preview to tuali full screen click A amp to resume When previewing select the channel and click lil to open audio the status will bell Then click to open audio scroll bar and adjust the audio After the adjustment the bar will disappear automatically When audio is open click EJ to close audio and the status will resume to ll Note When preview with web server only one channel audio can be previewed at one time 21 5 1 4 Stop Preview Click on the playli
24. ansmission protocol TCP or UDP The Size of File Packaging Set the size of recordings Main Stream for recording Substream for viewing Stream Type i live images Network Transmission N Set real time and fluency of network feature Local Path for saving recordin captured images preview captured images playback Path for saving download files Select a folder to save downloaded recordings 9 2 IP Camera Configuration Click Remote Config and enter IP camera configuration menu 34 Preview Playback Conf Current User admin Local Config IP Camera Confi 7 g Channel No IP Address Domain IP Camera No Online Statues 172 8 40 171 IP Camera 172 8 40 210 172 8 40 148 172 8 40 153 172 8 40 145 172 8 40 33 172 8 40 164 172 8 40 150 172 8 40 160 172 8 40 70 172 8 40 152 172 8 40 161 172 8 40 57 Remote Config Login mode IP Address Manufacturer UserName A gt A AL A A h gt LA Ah Ai x mu x BE x Rei x I x gt A Y Channel No Modify Reset Quick Add Single Add Configuration parameters 2008 2011 Hangzhou Hikvision Digital Technology Co Ltd All rights reserved y Figure 9 2 Model Name DS 9504NI S Up to 4 ch DI or 2 ch 720P or 1 ch UXGA IP cameras DS 9508NI S Up to 8 ch D1 or 4 ch 720P or 2 ch UXGA IP cameras DS 9516NI S Up to 16 ch D1 or 8 ch 720P or 4 ch UXGA IP cameras Note For DS 2CD852MF series IP camera at UXGA resolution up to 1 channel can be c
25. ar All 9 7 Account Management The default user name and password of device administrator are admin and 12345 Administrator can remote add delete users or distribute authority for users The new added users are divided into two levels user and operator For Remote Configuration privilege operator has Voice Talk right user does not for Channel Configuration privilege operator has all the rights user has local playback remote playback rights IP Address Physical Addres admin Administrators 0 0 0 0 00 00 00 00 00 00 Select ia Account Management admin user privilege Privilege Ci Aw a E Local PTZ Control E Local Manual Recording E Local Playback Local Parameter Settings Local Log Query Local Advanced Management Local Channel Management E Local backup Local Shutdown Reboot E Remote PTZ Control E Remote Manual Recording E Remote Playback Remote Farsmeter Settings ISICIRIRIR RIRIRIcIcIsIsig 54 User Information Click Add to add user Username Note If you set the IP address or physical address and then Password only the PC with the same IP address or physical address can Confirm Password oO visit the device through network O cues El IP Address Combine O 0 0 0 Physical Address Combine 00 00 00 00 00 00 eg d0 40 30 41 03 a0 Note Local PTZ Control Locally control PTZ cameras Local Manual Record Loca
26. device cannot be detected please try to connect again If it still cannot be detected this may be because of the compatible problem between NVR and backup device 30 CHAPTERS Log Search Click Log to enter log query menu English v Preview Playback Current User admin Major Type Minor Type Remote User Remote HOST A sl Local User Log Search 2010 06 03 00 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 Information Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 00 00 Info
27. e ee a Ee Ee Ee an es ee een ae ae ee ae ee ee ee ee ae IP Video Mask D La Network Parameters ss A E E ZZZ E E eal et ai i a ai ai i a ai a ee e a A eo nn E E E A A AI A Fe I A ES PP FFF E Settings AA i sii ii i a Ee Be ee Bee oo DDNS Settings l SSI 52223252225 PP HTP Settings A ee ee ZZZ Ss aa ee ee i re e a PP Het Disk Settings Nasa SS SS AA ASS AAA A A i SP E mail Settings sE AAA Sj Alarm Parameters Exception Parameters Bi Scheduled ea Motion Ia Al arm E Account Management HDI Settings Motion Alarm E Motion amp Alarm DB Command Ey Update Remotely Advanced Settings Settings Record Time Settings Figure 9 7 Recording Schedule Step 2 Set recording time and type Weekday IERA M All Day Recording Click Settings button besides to Record Time to enter setup 7 page mrm P p Pa sereno Recording z Select one day in a week and select All Day recording if mes aa LELE L necessary You may also set period recording by disable All Be a Day Recording there are 8 time periods in one day Then you Preis PA PSP PS Fre Y can select schedule recording from the drop down menu re ne an beside the periods Then you may also select copy the settings Pre DS P a Pa Fr I fp 4 Schedule Recording 7 to whole week or to one day eee Note Please make sure that each time period is not Copy to hole Week y
28. ect the previewing channel and adjust the brightness Brightness contrast saturation and Hue for it Contrast Clicka to increase and click kal to decrease Click wi or Bean also adjust the value saturation Hue Click icon to resume the default values 23 CHAPTER 6 PTZ Control If the front end connects with PTZ PTZ control is available when preview With the direction buttons it can achieve 8 directions control Also zoom focus iris light and wiper are adjustable A r Zoom y Click IZ to enable auto scan click again to stop it Focus O lt REN If preset point is set the point can be called by selecting in the de iis draw down list and clickin gill M z Light GP Wiper Presto 23 CHAPTER Playback Click Playback to enter playback menu English v Preview Playba l Config i Current User admin Embedded Net DVR J IPCamera 02 iPCamera 03 Current Status e PCamera 04 44 J IPCamera 05 J IPCamera 06 J IPCamera 07 3 IPCamera 08 3 PCamera 10 3 PCamera 11 J IPCamera 12 3 IPCamera 13 Down BackUp 2010 06 08 16 07 21 2008 2011 Hangzhou Hikvision Digital Tecnology Co Ltd All rights reserved Figure 7 1 Playback interface description Carnet ist Playack video Pllaybackcontrol Playback status Calendar OQ Download Backup Playback control buttons description Pay Sp Lg y Slowdown Speedup Le Playbysing
29. indicator turns red turn off the power switch on the back panel Other Methods of Shutdown Shutdown with Power Switch Please try to avoid shutting down the unit by turn off the power switch on the back panel especially during recording Shutdown by Unplug Power Supply Please try to avoid shutting down the unit by unplug power supply especially during recording Note It is highly recommended that an Uninterruptible Power Supply UPS be used in conjunction with the unit CHAPTER2 Network Parameters Configuration DS 9500NI S Series NVR are mainly for IPC DVS network video storage and playback Network configurations are needed before operating including IP address subnet mask gateway and port Note The factory default username is admin password is 12345 The factory default IP address of DS 9500NI S series is 192 168 0 1 2 1 Hyper Terminal Setup The common method is to connect NVR and PC with serial line run Hyper Terminal and modify parameters with serial command Please connect the RS 232 port of NVR with the COM port of PC directly power on the NVR and PC and follow the steps Step 1 Enter Hyper Terminal Click Start gt Programs gt Accessories gt Communications gt Hyper Terminal in Windows system and the dialogue box below will appears as Figure 2 1 1 Connection Description EA New Connection Enter a name and choose an icon for the connection Mame Icon
30. ings buttons to set area arm schedule and linkage 4 Step4 Tick box of Start Draw and draw an area on the image by lift pressing and holding the mouse Double click can select full screen Step5 Select a sensitivity level for motion detection Level 1 is the lowest 6 is the highest Step6 Arm Schedule Setup You may select one day in a week or select several time periods in one day Then you may also select copy the settings to whole week or to one day Note There are 8 time periods in one day Step7 Go back to Schedule Record page and click settings button besides Record Time to enter Recording Schedule menu Step8 Select one day in a week and select All Day recording if necessary You may also set period recording by disable All Day Recording there are 8 time periods in one day Then you can select Motion Detection from the drop down menu beside the periods Then you may also select copy the settings to whole week or to one day Note 1 Please make sure that each time period is not overlapped 2 The valid time of motion detection recording is the intersection of arm schedule and recoding schedule 42 Area Settings 06 11 culw Fr JV Start Draw Sensitivity irlamera 08 Clear All IV Periodi Period J Period3 Period4 J Period5 Period Period J Periods Recording Schedule Weekday do Glu bul al al whut al ul ul al ul al ELE EE EIE EIE
31. le frame ESP Smapshot O Vidoni Open Close audio 7 1 Playback Query Step 1 Embedded Net DVR Select a channel on the channel list Channel 1 is the default y 3 IPCamera 02 IPCamera 03 SI IPCamera 04 27 Step 2 Select a date in calendar Step 3 Click Search to search the matched recorded files If there are search results then they will be shown in the time line area 2010 06 08 15 27 12 Drag the timeline to select the specific time Different file types will be indicated with different colors 7 2 Play Recording File se 2010 06 03 13 23 29 Curren 5 Norma After searching file click gt to play When playback the playback status will indicate the channel number time and status 2010 06 03 13 24 23 Current Status Normal 28 Recording file location Clic Input the time in the pop up box and click Go This will start the file In from the specified time 66 99 Drag timeline and set the video to the specified time to play back Click Config to enter local configuration menu where can change saving directory of captured image and recorded file CAOCXBMPCaptureFiles CAOCKDownloadFiles When playback click to capture image If capturing image successfully the saving image folder will pop up automatically Save in MJ Desktop O 0 e m When playback click to pop up saving file window After gt 7 A mr Libraries
32. lly start and stop manual recording on any of the channels Local Playback Locally play recorded files that are on the NVR Local Parameters Settings Configure the settings restore to default settings import export configuration file Local Log Query Search and view logs of NVR Local Advanced Operation HDD management including the initialization and changing the properties of a disk Ability to update system firmware as well as to stop the relay output Local Camera Management Enable and disable analog channels Ability to add and delete IP cameras Local Backup Locally backup recorded files from any of the channels Local Shutdown Reboot Shutdown or reboot the NVR Remote PTZ Control Remotely control PTZ cameras Remote Manual Record Remotely start and stop manual recording on any of the channels Remote Playback Remotely play and download recorded files that are on the NVR Remote Configuration Remotely configure parameters restore parameters to factory defaults and import settings to as well as export settings from NVR Remote Log Search Remotely view logs that are saved on the NVR Remote Advanced Operation Remotely manage hard disk drives initializing and setting properties for HDDs Ability to remote update system firmware and stop of the relay output Voice Talking Ability to use two way radio between the remote client and the NVR Remote preview Select and view live video over the network Remote Alarm Control
33. nnnnnnnnnnnnnnnnnnnnnneennnnennnnen 8 A a Rs Lleida 10 Network Parameters CONTE UA oca 10 2 1 Hyper Terminal Clasica cil ticla 11 2 2 Network Configuration by Hyper Terminal a g 13 CHAPTERS ran 15 ACHVEX Controls taa ss 15 CH ETE RNA Ellie 17 User los mand Fri ria AAA ASA AS AAA 17 CHAT TER cis 19 bird patent 19 D5 PLE se 20 Sed Windows DI visio 22222 20 Zichichi 21 LLS Preview Cool rennen ne ra 21 II OA as 22 5 2 Recording and Captunne Mastai 22 SIEB CO LI en ae er rer een 22 522 Captiring masse 23 A nan e E R EER EN 23 CHARTER ue 24 PLACA A e eos 24 CHALE Ne ee 26 Playback A RS A A 26 Pla biella 21 1 2 Play Recordin Ele ae sti eae 28 LoCapiunns Imase and D wnload standard da latas 29 TA Remote DI ai ee le een ee 30 CHAN TEO a ee EEE NAS 31 197 5 RC ne ce 31 CHAPTER a 33 A O II O II 33 IL Local CONIL ae AA 34 PAP Camera CORSICO tanica anta 34 92 1 QUcK Add SL IP camada ala 35 92 2 MSI Ada OL IP CAME tl A alal 36 SDs DESC OPIN SS UL INYO ride 38 93 1 V1deo Parameter ua a ndliassargllasgiasgiai 39 03 2 Schedule Recordine A II 39 Do Moton Detection RECO IO nassen E E EA 41 I ERDE RECHT aotearoa a een ae 43 93 5 Other Recordin Mod en a a 45 DA Alarm SEINES ins ke 45 DAL Motion Detection Alan een A nn 45 934 281 NaL level Alam Bene 46 DAS RIC RR RI FORIO FORIO POTE TT 47 Dae VAGCO MP aaa aa 48 DA SSB XCC OU OMS cacare 49 ON Network Contrato unio el ri lana 50 993 Ba
34. o Tampering Note This function is only available on IP cameras from Hikvision IP camera 1 i Step1 Select the channel number for video tampering Select Ei Channel Farameters gt Vi deo Tampering Settings Settings Settings Step2 Enable Video Tampering Alarm to activate settings IP camera 1 m of Area Settings Arm Schedule and Linkage Settings Settings Settings 48 Area Settings Step3 Set the video tampering area and sensitivity iii MG Sat 10 02 12 The sensitivity can be divided into three levels Low Medium and High Enable Start Draw and select the detection area by using mouse gt TPCamera 04 JV Start Draw Sensitivity Low Arm Schedule Step4 Set the fortify time for video tampering ce E Click Settings in Arm Schedule menu Select Weekday as some day of the week or the whole week for the arm schedule The All Day Record or 8 Periods can be selected as well Y Periodi J Period2 J Period3 s TT Period4 Note The time of each segment can not be overlapped ee eriod5 TT Periods J Period uul al al al al alw Period Linkage Alarm Trigger Mode Step5 Set linkage for video tampering mM T Email Linkage Click Settings in the Linkage menu TT Upload to Center TT Warning on Monitor Trigger Alarm Output Analog Alarm Output IP camera Alarm Output 9 4
35. onnected to DS 9504NI S model 2 channels to DS 9508NI S model and 4 channels to DS 9516NI S model 9 2 1 Quick Add of IP camera DS 9500NI S series NVR provides a function of remote auto searching IP camera When there are supported IP cameras in the same network segment of a LAN with NVR you may add it in one button with default user name password and port number Note Before applying Quick Add function please make sure that IP camera is compatible with NVR and default user name password port number are not changed Click fennel the on line IP cameras will be listed as figure below shown 35 Quick Add x IP Address Manufacturer Mask IP Version Serialo Channel No 172 8 40 130 HIKVISION 255 255 255 0 V2 0build 090316 200070689 172 8 40 119 i HIKVISION 255 255 255 0 V2 0build 090119 260026210 172 8 40 231 8 HIKVISION 255 255 255 0 V2 0build 100422 600303778 Cancel Figure 9 3 Tick a box in front of the listed camera and click OK to finish 9 2 2 Single Add of IP camera This function enables you to add a single IP camera quickly When there are supported IP cameras in the same network segment of a LAN with NVR you may add it in one button with default user name password and port number Note Before applying Single Add function please make sure that IP camera is compatible with NVR and default user name password port number are not changed First select a Channel No then click and the on line IP cameras will be li
36. otion Detection Alarm Step1 The same with the Step 1 of Section 9 3 3 Motion Detection Recording Step2 The same with the Step 2 of Section 9 3 3 Motion Detection Recording Step3 The same with the Step 3 of Section 9 3 3 Motion Detection Recording Step4 The same with the Step 4 of Section 9 3 3 Motion Detection Recording 45 Linkage Step5 Set the alarm linkage for motion detection and select Aan Trigger Mode IB Trigger Recording PIZ Linkage alarm outp ut channel T Audio Warning Email Linkage TT Upload to Center TT Warning on Monitor Trigger Alarm Output Analog Alarm Output IP camera Alarm Output Alarm Linkages Description When the alarm signal is detected the image of corresponding channel will pop out as single screen Audio Warning Alarm triggers buzzer Upload to Center Upload the alarm signal to the center such as client software Sa When the alarm signal is detected the client software will send the email to the E mail Linkage l designated mailbox Trigger alarm output of the device if the device is 9000 series triggering alarm output Teper Alara ipat of IP channel can be selected as well 9 4 2 Signal Level Alarm Step1 The same with the Step1 of Section 9 3 4 Alarm Recording Step2 The same with the Step2 of Section 9 3 4 Alarm Recording Step3 The same with the Step3 of Section 9 3 4 Alarm Recording Step4 The same with the Step4 of Section 9 3 4 Alarm Reco
37. overlapped 40 In the Advanced Record Settings you may configure parameters of Pre Record time Post Record time Recordings Duration Redundant Recording and whether to record audio Post Record Advance Advanced Record Settings Pre Record Duration Redundant Audio Record 9 3 3 Motion Detection Recording Go to Motion Detection page Remote setting G E Device Parameters ita 2 e Device Information TE P Je Version Information fa Channel Parameters F Display Settings FF Video Parameters F schedule Record gt Bein boasted F Video Lost P Video Tampering i kw MP Video Mask fa Hetwork Farameters E F Hetwork Settings JP PPPOE Settings JP DONS Settings F HTF Settings F Het Disk Settings F E mail Settings ce Serial Port Settings H E Alarm Parameters Exception Parameters Account Management HDI Settings fea Update Remotely Figure 9 8 Channel Ho IF camera e Enable Motion Detection Area settings Set area Set sensitivity Settings Arm Schedule Alarm schedule setting max 5 time frames per dary Settings Linkage Settings of related alarm output recording etc Settings Note If you are using IP camera that is not from Hikvision please setup this function by using its own software Step1 Select Channel No for motion detection recording Step2 Enable motion detection by tick the box Step3 Then you can click sett
38. port 2048 1536 1024 512 384 256 128 64 self defined 32 8192 kbps VBR not support CBR support 2048 1536 1024 512 384 256 128 64 self defined 32 8192 kbps 13105 MPEGA4 supp G711U Law sup ort RTSP MJEPG not sees 1A Law support ee sted support 320 240 640 480 1280 720 128 0 1024 frame rate 1 2 3 4 5 7 10 15 20 30 VBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M 6M kbps CBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M 6M kbps Allow NVR to receive motion detection alarm information but not to set motion detection zone Not support M SD 605 SD 615 V 1 1020 V 1 1020 SD 615 MPEG4 supp ort RTSP MJEPG not G711 support support H 264 not support MPEG4 supp ort RTSP MJEPG not G711 support support H 264 not support MPEG4 supp ort RTSP MJEPG not G711 support support H 264 not support D1 CIF QCIF 640 480 1280 10 24 frame rate 5 10 15 25 Note the resolution actually supported is D1 CIF QCIF D1 CIF QCIF 640 480 1280 1024 frame rate 5 10 15 25 Note the resolution actually supported is D1 CIF QCIF D1 CIF QCIF 640 480 1280 1024 frame rate 5 10 15 25 Note the resolution actually supported is 640 480 1280 1024 VBR support 64 128 256 384 512 768 1M 1 5M 2M 3M 4M 5M kbps CBR support 64 128 2
39. rding 44 Arm Schedule lala lo lola lo al ke I ae Linkage Cancel v 012345857 8 9 101112131415161718192021 222324 So BONO OOO O OO EEE iS LAAN ARTE DEN ARABA n E a y n setting Settings Copy to Step7 Select one day in a week and select All Day recording rin if necessary You may also set period recording by disable All Weekday ionda z M AN Day Recording Day Recording there are 8 time periods in one day Then you can select Alarm Recording from the drop down menu beside the periods Then you may also select copy the settings to whole week or to one day Note 1 Please make sure that each time period is not overlapped 2 The valid time of alarm recording is the intersection of arm schedule and recoding schedule xI dadadada AEN 1133090 1222020 Dre Per ui Fer I Per E Per Copy to Whole Week y 9 3 5 Other Recording Modes Other Recording Modes are including Motion detection amp Alarm Motion detection Alarm amp means recording is triggered when two situations happened together P means recording is triggered when one of the situations happened The configurations are the same with Motion detection recording or Alarm recording 9 4 Alarm Settings You can configure motion detection alarm signal level alarm video loss alarm and other alarm and linkage through web client 9 4 1 M
40. rding Linkage Y Alarm Trigger Mode A Trigger Recording e PTZ Linkage Step5 Set the alarm linkage for signal level and select alarm Audio Warning Email Linkage output channel Upload to Center Warning on Monitor Trigger Alarm Output Analog Alarm Output IP camera Alarm Output 46 Linkage Step6 Set PTZ linkage for signal level alarm v ni Note Alarm input can link PTZ of several channels but one channel can only link one option of preset sequence and pattern Fa mr tal rm 9 4 3 Video Loss Note This function is only available on IP cameras from Hikvision IP camera 1 v Step1 Select the channel number for video loss Select E Channel Farameters gt Settings Settings IP camera 1 Ra Step2 Enable Video Loss to activate settings of Fortify Time and Linkage Settings Arm Schedule Step3 Set the fortify time for video loss Click Settings in Fortify Time menu Select Weekday as some day of the week or the whole week for the fortify time The All Day Record or 8 Segments can be selected as well Note The time of each segment can not be overlapped lf Dei ala lolo lo e la sho lo lo lo a la CC i ei lt e pinn ln Whole Week v 47 Linkage Step4 Set linkage for video loss Click Settings in the Linkage menu 9 4 4 Vide
41. rk Parameterz gt P E m all Settings Confirm Password IV Server Authentication If server authentication is needed enable it i e W N and input Sender Receiver Details user name and password gt fjUizer dano E Input the sender and recipient information 1f 1t needs to send Sender Receiverl picture you can enable Attachment 1 e m Receiver Receiver3 Note Currently the function of captured picture attachment is invalid for DS 9500 NI S Send Interval 2s y TT Attachment SMTP SMTP Port 25 I Enable SSL 32 9 6 Channel Configuration 9 6 1 Channel Display Settings Note This function is only available on IP cameras from Hikvision IP camera 1 TPCamera 01 Select fin Channel Parameters gt Display Settings You can configure channel name OSD and related faro x parameters here Non Transparent amp Non Fla y Copy to 9 6 2 Video Mask Note This function is only available on IP cameras from Hikvision IP camera 1 v Stepl Select channel number and enable video mask Ge Select 5 Channel Farameters gt Video Mask Settings 53 Area Settings 06 12 20 at 11 01 01 Step2 Set the mask area Click Settings to enter area set menu Enable Start Draw el select the mask area by clicking and dragging the mouse Note Max 4 areas can be configured in one image IPCamera 04 IV Start Draw Cle
42. rmation Stop Recording 2010 06 03 00 00 Information Start Recording 2010 06 03 08 37 Operation Remote Log On 2010 06 03 08 37 40 Operation Remote Get Parameters Log Type 201063 M Start End 23 gt 59 59 gt 1 2 3 4 5 6 T 8 9 NN9000090009000906000000006000 37 19090090009000906000600006000 B800000000000000000000000000 2008 2011 Hangzhou Hikvision Digital Technology Co Ltd All rights reserved Figure 8 1 Select the log type and date to list all matched logs Enable Start as to search the log file in a certain period of a day Click tad can export the logs as Excel or TXT file Note Up to 2000 logs can be listed if the items are more than 2000 please choose a certain period and search again 32 CHAPTER9 Configuration Click Config button in the menu bar and enter parameters setup menu which displays local configuration by default 9 1 Local Configuration English Me Preview Playback Config Current User admin Local Config aa Protocol Type The Size of File Packeting Network Transmission Feature Path for saving recording files Browse Path for saving preview captured images Browse Path for saving playback captured images Browse Path for saving download files Browse 2008 2011 Hangzhou Hikvision Digital Technology Co Ltd All rights reserved gt Figure 9 1 Local Parameters Information Protocol Type Select network tr
43. rminal Connection names of all Hyper Terminal are included You can see an icon named as HK here Hyper Terminal Hyper Terminal A You are currently connected A Do you want to save the connection named HK Are you sure you want to disconnect now Cancel 2 2 Network Configuration by Hyper Terminal Enter Hyper Terminal Click Start gt Programs gt Accessories gt Communications gt Hyper Terminal gt HK then the Hyper Terminal interface will appear as figure below Type Enter and the prompt root dvrdvs will appear which means connection between RS232 interface of PC and RS232 interface of NVR is established successfully by Hyper Terminal The following operation commands are to accomplish the parameters setup in the prompt 13 HK Hyper Terminal File Edit View Call Transfer Help root helpm Commands Usage Printf the command usage list Get the device s IP address Set the device s IP address Usage setlp IP ADDRESS SUBNET MASK e g setIp 192 168 1 109 255 255 255 0 devices command PORT device s command PORT Usage setPort PORT NUMBER e g getGateway device s gateway setGateway device s gateway onnected 0 00 4 ANSIW 115200 8 H 1 Figure 2 2 1 Utilities Console help command is used to print common commands show as Figure 2 2 1 Show the current IP address of NVR Command format getIp Enter ea Setup NVR IP addre
44. seConnsuralion A 50 gt ZERPob A E E E ES SI 39353 DDNS SEI See anne nennen A A ereiee SI LIEN TPES CUE lai SI SS ANS UME 1 Saia 52 95 6 E Mail Sti OS nenn 52 9 0 Chamel Conn Ural on nee iur 53 Mo EEC hannel Display Seti OS ivi citadas 53 A Video MI Ie relati 53 Dd INC COUNE Walla COMIC IE rennen 54 DS Reniole WP UAC alri 55 2 UBIDE ee ee ne rn A A E 56 CHAPTER Wiss ur 58 IND PCI 2otc ce PO un SEAT 58 O adecco 59 Oil 60 ListorCompatible TE AMAS neue lie ele keins 61 List of Hikvision IP Cameras Supported by DS 9500NI S NVR 61 List of Third party IP Cameras Supported by DS 9500NI S NVR 62 CHAPTER 1 Introduction 1 1 Front Panel Introduction DS 9504NI S Front Panel Alarm indicator turns red when a sensor alarm is detected ea TX RX indictor blinks blue when network connection is functioning properly i HDD indicator blinks red when data is being read from or written to HDD Indicators Ready indicator turns blue when NVR is functioning properly Backup indicator blinks blue when data is being backup USB Ports Universal Serial Bus USB ports for additional devices such as USB mouse and USB Hard Disk Drive HDD Channel Status Indicators Blue indicates recording red indicates network connection purple indicates recording amp network connection DS 9508NI S Front Panel LED gt USB Ports Universal Serial Bus USB ports for additional devices such as
45. ss Command format setIp IP mask P e g setIp 192 168 1 11 255 255 255 0 Show the current port of NVR Command format getPort Enter en Setup NVR port Command format setPort Port e g setPort 9000 Show current NVR gateway address Command format getGateway Enter Setup NVR gateway Command format setGateway Gateway e g setGateway 192 168 1 1 14 CHAPTER3 ActiveX Control Installation DS 9500NI S series NVR can be accessed and configured by web server Open IE browser input the IP address of DS 9500NI S and then click Enter The system will remind you to install the ActiveX control After the installation you can configure and manage the NVR remotely The ActiveX control has English and Chinese to selections It can be used under 1024 768 1152 864 1280 1024 display resolutions Note Please use IE 6 0 or IE 7 0 as browser and upgrade OS to the latest version 16 CHAPTER 4 User Login and Exit Open IE browser input the IP address of NVR the web server will select the language automatically according to the system language and maximize the IE browser e User Login Windows Internet Explc http 172 8 40 18 doc en login asp sg Favorites 93 Suggested Sites v User Login i fry N A English v 24628828282 BE BB 8288 Gt Password a Port TT u gt Internet Protected Mode Off gt Q10 Figure 4 1 On the top righ
46. st it will becom MA This can stop the channel preview Click to stop all channels preview 5 2 Recording and Capturing Image The previewing channel is required when recording and capturing image Note When stop previewing will also stop the recording of this channel 5 2 1 Recording Cocal Config Click Config enter local configuration menu Remote Cong where can change the directory of saving recording file and the size of file packing Less Delay Good Fluency CAOCKRecordFiles CAOCXEMPCaptureFiles CAOCKDownloadFiles Click ID button on playlist to start recording of this channel if the icon is not a 1t will note Recording failed Click icon again to stop recording and the saving file folder will pop up automatically When multiple channels are under previewing user may click K to start all channel recording or clic to stop all channel recording Stop previewing will also stop recording of this channel 22 Note If saving file disk space is less than 500M the web server will stop recording automatically 5 2 2 Capturing Image Click Config to enter local configuration menu where can modify the saving capturing image directory Select a previewing window click to capture image If capture image successfully the saving folder will pop up automatically Note When disk space is less than 500M capture image will be failed 5 3 Video Parameters Setting Sel
47. sted as figure below shown 36 Online IPC IP Address 172 3 40 70 172 8 40 119 172 8 40 150 172 8 40 161 172 8 40 152 172 8 40 171 172 8 40 130 Manufacturer HIKVISION HIKVISION HIKVISION HIKVISION HIKVISION HIKVISION HIKVISION Mask IP 255 255 255 0 255 255 255 0 255 255 255 0 Version v2 0build 090522 V2 0build 090119 V2 0build 090522 V2 0build 090522 V2 0build 090522 V2 Obuild 100520 V2 0build 090316 serial No 260026182 260026210 260026235 260026251 260026225 400613419 200070689 x Channel No Cancle Figure 9 4 Select one camera in the list and click A to finish Then you can change IP address sub mask or user name password in the menu on the right and click Modify to confirm Manually Add IP camera i j clic Config og n mode First select a Channel No to enable IP camera Config menu shown on the right IP Address Input the IP address port user name and password click Modify to finish adding an IP 172 8 40 130 camera that will be listed in the IP Camera Information area TEE HIKVISION Clicking Reset button will restore the configurations of IPC back to the previous ones zur Clicking button will delete the selected IP camera UserName Channel No IP Address Domain 172 8 44 230 172 8 40 171 172 8 40 150 172 8 40 70 172 8 40 164 172 8 40 152 172 8 40 145 172 8 40 148 172 8 44 201 172 8 44 203 172 8 44 210 172 8 40 153 172 8 40 163 172 8 40
48. t corner language is selectable between Chinese and English Input the correct user name password and port click Login to enter preview interface or it will pop up an error box The default user name is admin password is 12345 and port is 8000 After login click Exit to log off and return to the login interface 18 CHAPTERS Preview After login the preview interface will display Playback I Config i Current User admin Embedded Net DVR IPCamera 01 4 E F Zoom Jes 06 03 2010 Thu 14 13 4 rr Al cea IPCamera 03 BB gt N o LINA gt 4 S lis pE v n IPCamera 05 pre IPCamera 06 pa Light 3 a IPCamera 07 E o en ae E IPCamera 08 LIE gt hi ae Preset01 IPCamera 09 o D gt me gt IPCamera 10 i IPCamera 11 IPCamera 12 Brightness PCamera 13 Contrast Saturation Hue 2008 2011 Hangzhou Hjikvision Digital Technology Co Ltd All rights reserved D Figure 5 1 Interface description o 0 _ Cham Liveview OPT O Videoadjustment i _ Py a Play control buttons description im window division 4windowsdivison 16 windows division SD Sp all preview a Capture image Am a B Start all recording HC Stop all recording O E Open Close audio AAA 5 1 Preview 5 1 1 Windows Division When live preview the windows division can be selected by click the button on play control are

Download Pdf Manuals

Related Search

Related Contents

the GLM System Manual  取扱説明書  Installation Manual  USER MANUAL - CAMBOARD Electronics  DeLOCK Cable USB Power  圧力トランスミッタ  Manual - MFuel  Morgan 8470 Manual - Hearthstone Stoves  Couleurs Bois  DIGITAL ULTRASONIC CLEANERS  

Copyright © All rights reserved. Failed to retrieve file